Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 512 items
More true peace of mind in food!
This fish is from the Pacific Ocean. What should I do about the radiation...!? And since I don't know who to trust, I will assess it with my own eyes. That's why I use Alpha Mier. In reality, it detects the most penetrating gamma rays. The scintillation type won't miss even the smallest evils.
Measuring minute vibrations in the X, Y, and Z directions using a three-directional servo-type sensor.
● A new vibration meter has been developed that can easily measure low-frequency micro-vibrations. ● It measures minute vibrations in the X, Y, and Z directions using three-directional servo-type sensors. ● The measurement mode can switch between acceleration, velocity, and displacement.
Accurately detect seismic motion with a 3-axis accelerometer. Safely stop equipment and plants to prevent secondary disasters.
The "MODEL-2702" is a vibration detector that can detect seismic motions equivalent to a seismic intensity of 6 and can safely stop manufacturing equipment and plant facilities. It outputs the synthetic vector value of a 3-axis accelerometer as a DC 4-20mA signal, allowing for direct connection to indicators and sequence circuits. By combining it with the optional digital monitor "MODEL-2590C," it can output alarm relays, enabling the construction of a simple earthquake monitoring system. 【Features】 ■ Outputs seismic motions up to 0-400 gal (corresponding to seismic intensity 6, reference value) ■ Set to frequency bands where the effects of seismic motion are likely to occur ■ Real-time peak hold output can be switched ■ Waterproof type (equivalent to IP65), allowing for outdoor installation *For more details, please refer to the PDF materials. Feel free to contact us with any inquiries.
<Used Analytical Equipment>
It is a photodiode array detector manufactured by Shimadzu. (S1746-00)
3-channel alternating current waveform detector
This device continuously measures the current waveform flowing through a low-voltage three-phase AC commercial power line (50/60Hz) and outputs it to an oscilloscope, data acquisition card, and power analyzer to monitor the current status continuously. The target currents are of seven types: 500/1000/2500/5000/10000/25000/50000A, with voltages up to 2kV. The bandwidth ranges from 0.6Hz to 800kHz. The accuracy is ±10%, with a low phase angle of 0.9 degrees, and it weighs 450g. The main unit can be mounted freely on a DIN rail or panel mount. The three-phase input side features a loop-snap type, making connection to the power line easy. With no moving parts, the lifespan is virtually permanent.
Automatically set the optimal frequency for the test object from three frequency bands! High-sensitivity detection is possible.
The "AD-4976 Series" is a warm-up-free metal detector that supports multi-frequency and features external noise visualization capabilities. It is compatible with dry products, wet products, aluminum-coated packaging, and iron-based deoxidizer products (optional). With enhanced noise and vibration countermeasures, it enables stable and highly sensitive detection. 【Features】 - Immediate inspection possible after startup without warm-up - Automatically sets the most suitable frequency for the inspected object from three frequency bands - External noise visualization function - Intuitive operation with an evolved touch panel that is easier to read - Quality assurance through operation restrictions at the administrator level and a history function *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Juman Goku Fukasaya Co., Ltd.](https://image.mono.ipros.com/public/product/image/70d/2000871446/IPROS35945567210026640176.png?w=280&h=280)
A case where foreign matter inspection and the inspection of iron-based deoxidizers can be conducted simultaneously on one line.
We would like to introduce a case study from Fukusaya Co., Ltd., which has implemented our "metal detector" equipped with a deoxidizer response software. The company was looking for an easy-to-use foreign matter inspection machine following the mandatory implementation of HACCP. After the introduction, they reported, "The inspection time is short, so labor hours have decreased, and employee overtime has reduced," and "It is efficient and very convenient as we can conduct foreign matter inspections and deoxidizer stock inspections simultaneously on one line." 【Case Overview】 ■ Introduced Product: Metal Detector AD-4976 Series ■ Implementation Effects - Easy to use with a color touch panel - Short inspection time has reduced labor hours and employee overtime *For more details, please refer to the PDF document or feel free to contact us.
BK Micro can prevent the occurrence of defects by safely, reliably, and quickly detecting tool breakage in advance.
Revolutionary tool wear detection system. Available in two types for lathes and machining centers, equipped with servo motors and encoders, allowing easy condition setting and changes by connecting to a PC via USB port. Common features include: ■ Cycle time is fast at 90°, ranging from 0.13 to 0.9 seconds. ■ Adjustable tool contact pressure. ■ Memory for tool contact angle. ■ Long lifespan of 5 million cycles. ■ Both controller and scanner are compact. Features for lathes include: ■ Capable of detecting extremely small tools of 0.1mm. ■ Easy setup through simple teaching. ■ Can detect up to 2 tool positions. Features for machining centers include: ■ Tool wear detection possible without sacrificing machining time by installing in the tool magazine. ■ Capable of setting and storing configurations for up to 512 tools. ■ Compatible with Profibus and DeviceNet, allowing direct connection to the machine's NC device for reduced wiring and PC-less setup and adjustments (input from NC device).
Sealed in a 0.5mm thick aluminum housing! Introducing the scintillation detector assembly.
We handle the scintillation detector assembly 'SC-38×38-R6231'. This assembly features the high-performance gamma-ray scintillator ScintiClear:SrI2(Eu) crystal, boasting a diameter of 38.1mm, produced by the American company Capescint. It is coupled with a PMT made by Hamamatsu and sealed in a 0.5mm thick aluminum housing with magnetic shielding. You can also choose to include a temperature sensor (optional), so please feel free to contact us if you are interested. 【Features】 ■ High-performance gamma-ray scintillator ScintiClear:SrI2(Eu) crystal with a diameter of 38.1mm, produced by the American company Capescint, coupled with a PMT made by Hamamatsu. ■ Sealed in a 0.5mm thick aluminum housing with magnetic shielding. ■ Temperature sensor (optional) also available for selection. *For more details, please refer to the PDF document or feel free to contact us.
A universal detector that measures various analytical substances with consistent responsiveness.
A universal charged aerosol detector (CAD) that measures various analytical target substances with consistent responsiveness can provide consistent area response on chromatograms regardless of the chemical structure of non-volatile analytes, ranging from ions to proteins. Additionally, its wide dynamic range allows for high-sensitivity detection. HPLC-CAD is utilized for the detection and quantification of compounds that are difficult to measure with UV detectors in various fields such as food, pharmaceuticals, and materials science. Please refer to the PDF for practical examples.
The input rate is 1,000,000 counts per second! A detector that provides faster and more accurate interpretation of X-rays.
The "UltraDry EDS Detector" provides faster and more accurate X-ray interpretation in industries such as metals and mining, advanced materials, and semiconductors. When used in conjunction with Thermo Scientific Pathfinder X-ray microanalysis software, it demonstrates exceptional resolution with a very high yield. It maintains an extremely high data collection speed without the need for external cooling or cooling with liquid nitrogen. 【Features】 ■ Incredible operating space that achieves excellent performance ■ Miniaturized integrated FET to effectively eliminate electronic noise ■ One of the largest collection solid angles among detectors available on the market, thanks to the crystalline active area ■ Sensitivity to light elements down to Be (beryllium) ■ No auxiliary cooling such as cooling water or fans, or liquid nitrogen required *For more product details, please contact us directly.
Surfactants and excipients with various chemical structures. Are you able to perform efficient analysis?
- I want to measure various chemical structures at once. - I don't have a standard sample, but I want to know the content. - It is difficult to detect with only a UV detector. In response to such requests, the Charged Aerosol Detector (CAD) is an HPLC detector that can be widely used for analysis. Keywords: quality control, product profiling, surfactants, additives, adjuvants, etc. The Charged Aerosol Detector (CAD) is the solution. The Charged Aerosol Detector (CAD) is a universal detector that provides consistent responsiveness regardless of the chemical structure of the analyte and achieves high-sensitivity detection with a wide dynamic range. *For more details, please refer to the PDF document or feel free to contact us.
Active in the chemical industry! Avoid missing non-volatile compounds.
This product is a universal charged particle detector that measures various analytes with consistent responsiveness. Its wide dynamic range allows for high-sensitivity detection. It is utilized for the detection and quantification of compounds that are difficult to measure with UV detectors in various fields such as food, pharmaceuticals, and materials science. 【Features】 - Simple and intuitive operability - Compatible with UHPLC/HPLC - Easy switching function for parallel detection (such as MS) - Allows changing the mobile phase from volatile to non-volatile without removing the detector from the system - Wide flow range (0.01 to 2.0 ml/min) *For more details, please refer to the PDF document or feel free to contact us.
