Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.
1021～1050 item / All 2056 items
Plastic mold
We produce a consistent line from precision plastic mold design and manufacturing to final products, primarily using a 3D CAD/CAM system. We also create various prototypes, simple molds, mass production molds, and injection molded products, and utilize cutting technology for shaping ceramics, glass, and hard materials.
Hall and pillar molds in sizes 4 to 12 inches that improve light transmittance.
SCIVAX is expected to further enhance its high performance in the future. We are manufacturing molds based on technical evaluations through simulations and devices aimed at improving light transmittance, which is useful for LEDs, organic ELs, solar cells, and more. This time, we have released two types of full molds for holes and pillars in sizes ranging from 4 to 12 inches (φ4” to 12”) that meet high performance, high quality, and low cost. ≪Specifications≫ 【Outer Dimensions】4 to 12 inches φ (please consult us for sizes below 4 inches) 【Pattern】220nm (1/2H) (± about 10.0%) 【Material】Si 【Depth】200nm (± about 5.0%) 【Outer Wall Angle】85 degrees 【Arrangement】Triangular lattice 【Pitch】460nm Please contact the SCIVAX Microfabrication Division (Phone: 044-599-5051, Email: nil-contact@scivax.com).
![[Case Study on Mold Life Improvement] Explanation of the Causes of Vertical Cracking in Inserts and Improvement Methods](https://image.mono.ipros.com/public/product/image/71a/2001016083/IPROS15704358646742789113.png?w=280&h=280)
This presentation will introduce the common phenomenon of damage in molding dies, focusing on the causes of vertical cracking in inserts and the measures to address it!
If the mold is damaged, the dimensions of the forged products may change or become scratched, resulting in non-compliance with standards. In the early stages of damage, the changes in the forged products may be small, allowing them to pass through the sampling inspection. If they do pass, it may become necessary to conduct a full inspection, which would force a halt in production during that time. To avoid such a situation, this time we will focus on "vertical cracking of the insert" and introduce methods to prevent damage and extend the lifespan of the mold. *For detailed information, please refer to the related links. For further inquiries, feel free to contact us.*
We have a track record of various shapes, materials, and thicknesses.
If you have any questions regarding the introduction below, please feel free to contact us.
Adaptable to various metals! Achieved high bonding strength through the anchor effect.
"DLAMP" is a groundbreaking technology that firmly bonds metals and dissimilar materials through a completely dry process using lasers. After treating the metal surface with a laser, dissimilar materials are poured in, achieving high bonding strength due to the anchoring effect. In-house processing of DLAMP treatment is also possible through technology licensing. 【Features】 ■ Adaptable to various metals ■ Partial processing is possible (one-sided treatment, patterning) ■ Low running costs (no waste liquid or consumables generated) ■ Shorter processing time compared to pulse waves, with higher tensile strength *For more details, please refer to the PDF document or feel free to contact us.
![[Processing Example] Reducing Delivery Time and Costs with Different Molding Methods](https://image.mono.ipros.com/public/product/image/374/2000694738/IPROS99594427768748535711.png?w=280&h=280)
Contributing to shorter delivery times! We strive to deliver products to our customers more quickly and at a lower cost.
We would like to introduce examples of processing precision sheet metal and press products that contain many complex bends. These products have complex shapes with strict tolerances, and they also involve deep drawing, making them very challenging. The complex bend areas have a tolerance of ±0.03. For this part, we use molds made by wire cutting. Compared to molds made by machining, there are limitations on the shape of the molds, but they can be produced at a lower cost. At thin sheet metal processing.com, we manufacture molds in our associated machining department, allowing us to quickly transition from mold concept discussions to cutting and then to bending processing. Given the increasing number of short delivery time projects these days, this method contributes to reducing lead times. 【Overview】 ■Material: SUS301CSP-3/4H ■Size: 6.5×24×3.15mm ■Thickness: t0.2 ■Precision: ±0.03 ■Quantity: 100 ■Delivery Time: 14 days *For more details, please refer to the related links or feel free to contact us.
![[Processing Example] High M6 bar ring and a 90° bend close to the bar ring.](https://image.mono.ipros.com/public/product/image/95c/2000694772/IPROS72374248419053463718.png?w=280&h=280)
Smoothly manageable! A case where bending was possible without touching the bar ring.
We received Super Dyma (high corrosion-resistant coated steel plate) from our customer and would like to introduce a case of the brackets we manufactured. The key points of this product are the "tall M6 bushings" and the "90° bend close to the bushing." There are four M6 bushings, and we were instructed to have at least three effective threads. To meet this requirement, it was necessary to achieve a height of more than 2.5 times the plate thickness. Based on past performance, we created a simple mold according to the designed values, but we were unable to satisfy the height requirement. Therefore, we remade the mold, reducing the size of the female mold and thinning the plate to secure the height. 【Overview】 ■ Material: Super Dyma ■ Size: 118×115mm ■ Plate thickness: t1.2 ■ Accuracy: ±0.05 ■ Quantity: 35 ■ Delivery time: 10 days *For more details, please refer to the related links or feel free to contact us.
![[Processing Example] Stabilization of processing with in-house jigs, 90° twisted bending processing.](https://image.mono.ipros.com/public/product/image/723/2000696535/IPROS78536900731140926773.png?w=280&h=280)
Our strength lies in the fact that we can design and manufacture all the molds and jigs necessary for plastic processing in-house!
We would like to introduce a particularly challenging case of precision sheet metal parts among the products handled by Hakubansen Kanagata.com. This product is a terminal part made from C2680-1/2H, which involves multiple processes such as tip crushing, curl bending, and twist bending. The tip crushing and curl bending are processed using a dedicated mold manufactured in-house. Our company designs and manufactures dedicated molds and jigs to ensure stable twist bending even with manual work. 【Overview】 ■Material: C2680-1/2H ■Size: 30×25×20mm ■Thickness: t0.64 ■Accuracy: ±0.05 ■Quantity: 100 ■Delivery time: 14 days *For more details, please refer to the related links or feel free to contact us.
Durable and easy-to-use pneumatic tools offers a rich lineup from compact and lightweight models to medium grinding types, meeting various application needs.
This catalog introduces the "MYTON Series" of grinding and polishing tools. It features a wide range of products, including the MG-40, a medium grinding tool with a low head design for improved visibility of the workpiece, the compact and lightweight MYG-25 with a 58 mm outer diameter grinding wheel, and the MYS-70 for medium polishing applications. We hope this catalog will assist you in selecting the right product for your needs. Contents: MG-40 MYG-25L MYG-40L MYG-50 MYG-70 For more details, please refer to the PDF document or feel free to contact us.
In addition to square, hexagonal, and octagonal grids, we also accommodate irregular shapes! We will design molds according to your preferences.
At Nagamine Seisakusho, which provides a wide range of ultra-precision molded products using microtechnology, we handle "precision honeycomb extrusion molding dies." Honeycomb structures have the advantage of significantly increasing the contact area for fluids while minimizing pressure loss. We can accommodate not only square, hexagonal, and octagonal grids but also irregular shapes. We will design the mold according to your desired grid shape and molding machine. 【Design Specifications】 ■ Hole diameter: Min. φ0.8mm ■ Groove width: Min. 0.05mm ■ Pitch accuracy: ±10μm ■ Hole diameter accuracy: ±10μm ■ Groove width accuracy: ±10μm *For more details, please refer to the PDF materials or feel free to contact us.
The world's smallest class honeycomb molding die. We will design the mold according to your desired specifications.
The honeycomb structure consists of continuously linked lattice-shaped cross-sections such as squares and hexagons, which offers the advantage of maximizing the contact area for fluids while minimizing pressure loss. This structure is used in automotive exhaust purification catalysts, among other applications. Our company manufactures and sells honeycomb extrusion molding dies utilizing fine hole and groove processing technology. We have recently developed a precision extrusion molding die capable of forming ultra-fine lattices exceeding the world's smallest class of 10,000 cells/in². 【Main Design Specifications】 ■ Functional Diameter (Extrusion Diameter): Up to φ40mm ■ Slit Width: Minimum 0.025mm and above ■ Lattice Hole Diameter: Minimum 0.07mm and above * It is possible to manufacture up to a maximum of 70,000 cells/in² in cell density. We have a track record of molding honeycomb structures using thermoplastic resin compounds with added ceramics or stainless steel powders. We will design the mold according to your desired lattice design and molding machine. For more details, please refer to the PDF document or feel free to contact us.
A mold that fuses the artisan's sensibility with cutting-edge technology.
The creation of molds that fuse artisan sensibility with cutting-edge technology! Injection molding molds for the production of plastic products in fields such as automotive parts, home appliances, cosmetics, and medical devices.
Visualizing the molding process from product design. We quickly produce high-quality molds.
At Matsuno Mold Manufacturing Co., Ltd., we utilize flow analysis technology to predict the flow of resin during molding, and we have introduced molding machines to establish a system that allows us to conduct molding trials in-house. This enables us to comprehensively understand the processes that occur before and after mold production within our company. Not only does this contribute to shortening the delivery time of the molds themselves, but it also aids in reducing the time required for mass production and commercialization. Furthermore, by effectively combining advanced equipment, excellent processing technology, and experienced engineers backed by know-how, Matsuno Mold Manufacturing Co., Ltd. demonstrates performance that cannot be replicated by other companies. 【Features】 - Streamlined discussions during design through flow analysis - High-quality mold design - Reduction in the number of trials - Shortened delivery times through collaboration with the molding process - Proactive use of IT for rapid responses For more details, please contact us or download our catalog.
Leave the verification trial for the feasibility of two-color molding (material fusion test) to us!
We would like to introduce "Fusion Dumbbells," the core technology of Daisei Plus Co., Ltd. In response to the request, "I want to consider the design concept for two-color molding, but I would like to know the fusion strength of the materials I want to use." Our company has prepared a dumbbell test mold for two-color molding (for fusion confirmation) and provides reports on the fusion strength results of materials. This allows for pre-validation of material fusion strength, enabling progression to the next design step. 【Features】 ■ We provide a dumbbell test mold for two-color molding (for fusion confirmation) and report on the fusion strength results of materials. ■ Pre-validation of material fusion strength allows for progression to the next design step. ■ Experienced staff offer advice during the material selection phase. *For more details, please refer to the PDF document or feel free to contact us.
We will respond to local procurement not only domestically but also in overseas locations such as China and Thailand.
We have bases in three Asian countries, including Japan, and we respond to global material procurement. We also have a track record of shipping to third countries such as the Philippines and Indonesia, in addition to China and Thailand. For more details, please check the catalog and feel free to consult with us.
We can handle small lots of 200 units at low cost. You can also leave the management of secondary processing such as black painting to us.
Our company manufactures simple molds in response to requests for small lot products and offers proposals at low costs. Of course, we can also accommodate inquiries for prototypes. The cost of simple molds starts at 50,000 yen, and they can be produced in as little as one week. Additionally, we can handle a wide range of secondary processing after pressing. Plating, barrel polishing, heat treatment, insert molding, painting. For more details, please feel free to contact us.
A must-see for designers! Key points on press part processing, including the limits of press processing.
The "Press Parts Processing One-Point Course NO1" is a catalog from Yamamoto Co., Ltd., which handles metal domes for tact switches and sheet switches, automotive parts, electronic components, and more. This catalog includes information on the processing limits of pressing, such as the limits of punching and bending processes, and corner wire R shapes, along with diagrams and explanations. Please feel free to consult us about designs that exceed processing limits. We can propose optimal designs based on the intended use of the products. [Contents] ■ Processing limits of pressing ■ Contact information ■ Main products ■ Mass production flowchart, etc. *For more details, please refer to the catalog or feel free to contact us.
Rich variety of shapes and materials, custom design.
The use of floating spacers makes it easy to form both the upper and lower axes. With the installation of a release mover, you can easily demold while keeping the die fixed. We also accommodate custom specifications. For more details, please download the catalog or contact us.
Usable under a wide range of temperature conditions from -196℃ to +260℃. Suitable for harsh environments.
The mechanical components "sliding materials/sealing materials" include complex and highly dimensionally accurate mechanical parts that utilize resin properties, as well as sliding materials with improved rigidity and compressive strength achieved by blending fillers. There are sealing materials used in a wide range of shapes. Sliding materials are suitable not only for unlubricated equipment but also for high-load conditions in manufacturing processes. Examples include piston rings, rider rings, chip seals, and high-pressure rod packings. For more details, please download the catalog.
![[Sae Hwa Metal] Automotive parts, construction machinery, press molds](https://image.mono.ipros.com/public/product/image/adf/2000711480/IPROS3885271482210457617.png?w=280&h=280)
Automotive parts, construction machinery, press molds, large industrial machinery.
[Business & Products] - Cast products Factory 1: Hydraulic parts (construction machinery, robots) Factory 2: Automotive press molds - Export countries: Japan, Europe, America, South America, India, etc. - Hitachi Construction Machinery Class A registered company [Major Clients] Hyundai Motor, GM, Ford, Nissan, Honda, Komatsu, Kubota, Hitachi Construction Machinery
Although the molding time is short, the strength is high, making the LFT-D molding method suitable for the production of structural components.
1. Electric Vehicle Battery Tray Mold - The LFT-D molding method, which has a short molding time while maintaining high strength, is applicable for the production of structural components. 2. Hydrogen Tank Liner Circuit Molding Mold - Compared to other molding methods, mold production can be achieved at a relatively low cost. 3. Electric Vehicle/Agricultural Machinery ENGINE SIDE COVER Mold - The application of the LFI molding method, which is an unpainted eco-friendly process, is possible.
![[KEONWOO PRECISION] Plastic Injection Molding](https://image.mono.ipros.com/public/product/image/d92/2001214503/IPROS98402431659946095.jpg?w=280&h=280)
A true partner in the field of gold.
A smart factory mold manufacturing process that integrates ICT technology to improve processing accuracy and realize single delivery times.
We will create high-precision precision punches to your desired dimensions! Same-day service available!
This is a precision punch for tip shape deformation. Prerequisites: L dimension is 60mm or less φD4 is 20mm or less L2 is only during setup Please refer to the drawing for the tip shape Material: AF1 (please consult for other options) Quantity: From 2 pieces Delivery: Shipped on the 3rd day A separate estimate will be provided for 20 pieces or more We also accommodate requests for coating.
Design and manufacturing of ultra-precision molds for mass production from a single component.
We flexibly respond to and manufacture press molds for semiconductor and general electronic component production, as well as parts from a single unit.
Leave the design and production of precision molds, jigs, presses, and labor-saving equipment to us!
At Brostech, we design and manufacture press molds for semiconductor production, press molds for electronic component manufacturing, contacts, press molds for thin parts manufacturing, and precision molds. We also produce micron-order ultra-precision parts with a tolerance of ±0.001mm, as well as design and manufacture jigs, presses (pneumatic, servo), and labor-saving devices. Please feel free to contact us when you need our services. 【Production Overview】 ■ Production of Ultra-Precision Parts - Manufacturing of parts using various materials such as steel, carbide, ceramics, and resins (various general press mold parts, mold parts for resin molding, jig parts, equipment parts, etc.) ■ Design and Manufacture of Precision Molds - Press molds for semiconductor production (cutting, forming), press molds for electronic component manufacturing, contacts, and press molds for thin parts manufacturing (progressive molds, single-action molds) *For more details, please refer to the PDF document or feel free to contact us.
A press and cold forging die that can flexibly accommodate complex and precise shapes.
At Shinbō Seiki, we primarily produce press molds and cold forging molds used for parts in automobiles, home appliances, and more. Our skilled staff, with excellent technology and years of experience, produces these molds using the latest processing machines and work environments. We can flexibly respond to complex and precise shapes. For more details, such as processing examples, please download our catalog or contact us.
![[Processing Example] Inner Diameter Serration Processing Over Pin Diameter 0.02](https://image.mono.ipros.com/public/product/image/7c2/2000610462/IPROS57261318353187452215.png?w=280&h=280)
Thick plate processing composite extrusion! Introduction of a case where SPHC material was serrated in the inner diameter section.
Our company specializes in mold design and manufacturing, with a focus on irregular workpieces and precision gear products, and we have a mass production system in place. The knuckle press, primarily 1000TON, employs transfer processing to shorten the production process, and we have established a production line for a series of raw materials using two annealing furnaces and a bonding line. Furthermore, we have built a consistent production flow, achieving high-precision processing through race processing lines, turning, grinding, and MC integration. Please feel free to contact us when you need our services. [Overview] ■ Material: SPHC ■ Processing Method: Inner diameter serration processing with an over-pin diameter of 0.02 ■ PR Point: Thick plate processing with complex extrusion *For more details, please refer to the PDF document or feel free to contact us.
![[Processing Example] Combined Processing of Drawing and Extrusion](https://image.mono.ipros.com/public/product/image/175/2000610464/IPROS28442549571181314176.png?w=280&h=280)
The material is SPHC! We will introduce a case of extrusion processing with an outer diameter of Φ120.
Our company specializes in mold design and manufacturing, with a focus on irregular workpieces and precision gear products, and we are equipped for mass production. We primarily use a 1000TON knuckle press to shorten processes through transfer processing, and we have established a production line for a series of raw materials using two annealing furnaces and a bonding line. Additionally, we have built a consistent production flow, achieving high-precision processing through race processing lines, turning, grinding, and MC (machining center) integration. Please feel free to contact us when you need our services. 【Overview】 ■ Material: SPHC ■ Processing Method: Stamping and extrusion combined processing ■ PR Point: Outer diameter Φ120 extrusion processing *For more details, please refer to the PDF document or feel free to contact us.
![[Processing Example] Stamping Extrusion Processing](https://image.mono.ipros.com/public/product/image/3f7/2000610467/IPROS10961817135085250055.png?w=280&h=280)
Due to hollow extrusion, processing time is shortened! We focus on mold design and manufacturing and have a mass production system in place.
Our company specializes in mold design and manufacturing, excelling in irregular workpieces and precision gear products, and we have a mass production system in place. We primarily use a 1000TON knuckle press to shorten processes through transfer processing, and we have established a production line for a series of raw materials using two annealing furnaces and a bonding line. Furthermore, we have built a consistent production flow and achieved high-precision processing through race processing lines, turning, grinding, and MC (machine control) technology. Please feel free to contact us when you need our services. 【Overview】 ■ Material: SCM435 ■ Processing Method: Deep drawing extrusion ■ PR Point: Shortened processing time due to hollow extrusion *For more details, please refer to the PDF document or feel free to contact us.
![[Processing Example] Extrusion Processing (Material: S10C)](https://image.mono.ipros.com/public/product/image/806/2000610469/IPROS47769318235438577499.png?w=280&h=280)
Outer diameter Φ130, rise thickness 2mm, L=15 or more! Example of extrusion processing using S10C material.
Our company specializes in mold design and manufacturing, with a focus on irregular workpieces and precision gear products, and we are equipped for mass production. We primarily use a 1000TON knuckle press to shorten processes through transfer processing, and we have established a production line for a series of raw materials using two annealing furnaces and a bonding line. Additionally, we have built a consistent production flow, achieving high-precision processing through raceway processing lines, turning, grinding, and MC (machine control) technology. Please feel free to contact us when you need our services. 【Overview】 ■ Material: S10C ■ Processing Method: Extrusion ■ PR Points: Φ130 (outer diameter) with a thickness of 2mm and a length of 15 or more *For more details, please refer to the PDF document or feel free to contact us.
