Tester Product List and Ranking from 316 Manufacturers, Suppliers and Companies

Hand Over Tester MH3800

A total system that allows for easy testing of wireless device handover (handoff) and distance attenuation (fallback operation) in a real-world environment.

● Ideal for simulating changes in radio waves in the air ● Quantification of test environments, efficiency improvement of verification work through long-term (aging) tests and test automation ● The test system can be configured with a standard of 8 paths, up to a maximum of 64 paths (64 MAT800/810 units can be controlled collectively) 【Features】 1. Simulates the attenuation process of radio waves as mobile terminals transition from base station A to base station B. 2. Handover (handoff) evaluation 3. Fallback (reduction in transmission speed) operation testing 4. Long-term (aging) testing 5. Highly versatile and expandable system 6. Simple scenario creation and control 7. Target markets Cellular (2G, GSM, 3G, CDMA, 4G, LTE, WiMAX, 5G, etc.), wireless LAN, Bluetooth, Zigbee, NFC/RFID, Wi-SUN, UWB, ETC2.0/DSRC, M2M, sensors, wearables, satellite communications, etc. *Applicable frequency: 300MHz to 12.5GHz (depending on the specifications of the programmable attenuator)

Company：マイクロニクス
Price：Other

Machinery and equipment installation/dismantling/relocation
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NACMAN Multi-Cable Tester

Compact and space-saving, easy to operate.

It is a testing machine that can perform continuity, dielectric strength, insulation resistance, and momentary interruption tests in a single operation.

Company：宗本製作所
Price：1 million yen-5 million yen

Other industrial robots
Other FA equipment
Other cable related products
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Print Simulation Tester

Print Simulation Tester PST

You can measure direct surface conditions that were not achievable with conventional air leak methods!!!!!!

Company：マツボー
Price：Other

Printing Machinery
Testing Equipment and Devices
Image Processing Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dynamic permeability tester

By measuring the ultrasonic wave intensity, evaluate the permeability of water-based liquids to paper and cardboard, as well as their sizing, water retention, wettability, and coating paper surface properties.

Before each measurement, calibration is performed on the receiving side to ensure that the ultrasonic intensity remains constant, allowing for evaluation on an absolute scale.

Company：マツボー
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat Seal Tester TS-12

Easily seal soft packaging materials with heat curling!

A heat sealer for measuring peel strength that achieves precise temperature control over the entire sealing length by individually setting the upper/lower clamp temperatures through digital control.

Company：マツボー
Price：Other

Testing Equipment and Devices
Image Processing Equipment
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Adhesiveness Measurement Loop Tack Tester

A testing machine that can accurately measure adhesive properties, tack, quick stick, and bonding strength in accordance with ASTM D2979.

Measure load with a resolution of 0.1g and an accuracy of 0.02% full scale.

Company：マツボー
Price：Other

Testing Equipment and Devices
Image Processing Equipment
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat Seal Tester TS-4

Measuring the overall pressure applied to the film sample! A heat seal tester that employs a high-precision load cell system.

Heat sealer for creating accurate heat samples in peel strength measurement.

Company：マツボー
Price：Other

Testing Equipment and Devices
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CCIT-compatible multifunction leak tester Multi-Q

A single device compatible with vials, syringes, medical devices, pillow packaging, pouch packaging, etc.

The Sepha Multi-Q is a multifunctional leak tester that can perform multiple types of leak tests with a single device. By changing attachments, it can accommodate leak testing for all types of packaging, including vials, syringes, ampoules, pillow packs, pouches, four-way/three-way seal packages, and MAP (modified atmosphere packaging). It complies with data integrity standards, 21 CFR Part 11, and CCIT. It can detect pinholes as small as 1µm, and testing methods include vacuum differential pressure (ASTM F2338-09(2013)), pressurized differential pressure, and pressure decay methods.

Company：マツボー
Price：5 million yen-10 million yen

Leak Testing Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inline leak tester for full inspection of pharmaceuticals CCIT.

With years of experience, we can handle any container's CCIT (Container Closure Integrity Test)! Numerous achievements worldwide!

High-Speed Inline Total Leak Testing Device for Vials, Syringes, BFS, and IV Bags This device is designed to enable non-invasive, non-destructive testing of various types of pharmaceutical containers and their contents at high production speeds in a 100% inline state. The tests are fast, highly reliable, reproducible, and provide consistent results, allowing for complete batch control without compromising the functionality of the containers or contents. The empty leak or pressure leak methods fully comply with current GMP international regulations. The container integrity test (CCIT) is based on ASTM F2338-09 (Standard Test Method for Non-Destructive Leak Detection of Packages) using vacuum and pressure decay methods. High-class machine design and automation solutions facilitate operations and support the reduction of downtime. The device is equipped with electronic batch record management or manufacturing execution systems and can be integrated into an Industry 4.0 environment.

Company：マツボー
Price：Other

Defect Inspection Equipment
Leak Testing Equipment
Visual Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable Tester "Network Master Pro MT1000A"

Combine measurement modules to match the test! A portable tester with excellent expandability and operability.

The "Network Master Pro MT1000A" is a modular portable tester that allows for the addition of various modules, enabling the combination of modules according to applications such as fiber optic installation, network activation, maintenance, mobile base station, and antenna installation (CPRI). It features a touch panel for intuitive operation. Reports can be output in PDF and CSV formats, and remote operation of the measuring instrument and long-term monitoring can also be performed. Additionally, the measurement procedures and tests that were previously conducted on-site have been scripted, allowing tests to be executed with the push of a button. This reduces the time required for training testers and operating training, contributing to a reduction in on-site work time and increased efficiency. 【Features】 ■ One of the smallest in the industry, modular portable tester ■ Combine measurement modules according to testing needs ■ Automate on-site activation and maintenance testing procedures to save time and improve efficiency ■ Intuitive operation with a large color touch panel (9 inches) ■ Long-term continuous testing from remote locations via VNC remote operation *For more details, please download the PDF or feel free to contact us.

Company：アンリツ
Price：Other

Other network tools
Server monitoring and network management tools
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Norbar Torque Wrench Tester TrueCheck Plus

The calibration inspection of the click-type hand torque wrench can be easily performed in-house, displaying measurement values with an accuracy of ±1% within a range of up to 2000 N.m!

It is very important to keep your torque tools in the best calibration condition, and many companies typically outsource this work to third-party calibration providers. However, how convenient would it be if it could be done in-house? You would be able to inspect any questionable issues more frequently and immediately when problems arise, eliminating the need to send wrenches for repair and interrupt work in the meantime. The main reasons many companies do not perform their own wrench calibration inspections are the high cost of testing equipment and its complexity. Norbar's new "TrueCheck" torque wrench tester has eliminated these concerns. Norbar's testing equipment is highly cost-effective and significantly more affordable than other devices on the market. There are two models available: the basic model "TrueCheck" and the more feature-rich "TrueCheck Plus."

Company：RINO･CONNECTION.
Price：Other

bolt
Torque wrench
others
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-precision torque measuring instrument TrueCheck / TrueCheck Plus

Manufactured by the UK's Norbar, the largest torque wrench manufacturer in Europe. It has a measurement accuracy of ±1% at a maximum of 2000 N·m, and internal calibration checks can be easily performed!

The main reason many companies do not conduct their own wrench calibration checks is due to the high cost of testing equipment and its complexity. Norbar's new "TrueCheck" torque wrench tester has eliminated these concerns. Norbar's testing equipment is highly cost-effective and significantly more affordable than other devices available on the market.

Company：RINO･CONNECTION.
Price：Other

Torque wrench
Torque Meter
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Catheter Shaft Tester CT-15

Detection of pinholes in metal-reinforced catheters and short-length electric wires.

The Clinton Corporation's catheter shaft tester CT-15 safely detects pinholes in metal-reinforced catheters and short-length wires.

Company：深瀬商事幕張業務センター
Price：Other

Other measurement, recording and measuring instruments
Other inspection equipment and devices
Defect Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DC Spark Tester TST-10W

Spark test inside the rotating body of the banchar.

It will be possible to conduct spark tests inside the rotating body of the twisting machine (buncher). High voltage will communicate wirelessly through slip rings to detect damage at the bows, eyelets, and guides inside the buncher for counter-twist and four-strand double twist bunchers, etc.

Company：深瀬商事幕張業務センター
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Universal Bond Tester "System650"

It is possible to accommodate various package styles! Achieving easier data management is possible.

The "System650" is a universal bond tester that enables easy data management through the Windows-based software "Bond Test Manager." It is equipped with an image capture function that allows monitoring of the fracture conditions after the shear test on a screen. It supports bump shear tests on 300mm wafers. 【Features】 ■ Various tests such as wire pull, ball shear, die shear, stud pull, tweezer pull, and ball pull can be performed by exchanging modules. ■ It has high accuracy and resolution that eliminates the need for module exchange for each measurement range. ■ It can accommodate various package styles. ■ Easy data management is possible through network connectivity. *For more details, please refer to the external link or feel free to contact us.

Company：ヒューグルエレクトロニクス
Price：Other

Semiconductor inspection/test equipment
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Field Tester FT101

The ultimate companion for signal evaluation and optimization.

The ideal partner for evaluating and optimizing LoRaWAN network signals. Equipped with a 5.72-inch HD touch screen, it allows you to perform real-time network signal testing and analysis at your fingertips, making it easy to deploy and manage LoRaWAN devices. Instantly displays key metrics such as RSSI, SNR, and packet loss rate between gateways and nodes. These insights enable you to quickly assess the quality of the LoRaWAN network and find the best locations to deploy LoRaWAN devices. ● Real-time network signal testing and analysis ● 5.72-inch HD touch screen ● Full frequency band testing capabilities ● Records signal test results along with GPS location data ● Seamless report export and data analysis ● Long battery life

Company：ウェーブクレスト
Price：Other

Other electronic measuring instruments
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wetness Tester SP-2

It is a wettability tester that adopts the SP tension method (profile heating method).

SP-2 is a wettability testing device for solder paste, component electrodes, and printed circuit boards in surface mounting, utilizing the SP tension method (profile heating method). The entire wettability process can be observed through a glass window. With a preheat function and built-in powerful heater, it can achieve the same or optimal temperature profile as in actual reflow processes. Additionally, by employing an electro-balance sensor, it enables the detection of smaller forces, allowing for the wettability evaluation of microchip components sized 1005 and 0603. Conditions can be set, measurements operated, and results such as wetting time and wetting force automatically analyzed using a computer (with dedicated software). Evaluation tests for solder wire are also possible. Furthermore, measurements using the wetting balance method, micro-wetting balance method, and rapid heating method are available (optional). It is ideal for wettability evaluations related to lead-free solder (paste, components, temperature conditions). For more details, please contact us or refer to the catalog.

Company：マルコム
Price：Other

Testing Equipment and Devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Leak Tester HE5800

Quick and accurate leak checks for airtight components! Precise quality assessment using high-sensitivity differential pressure sensors. Custom orders and modifications are also accepted.

The HE5800 is currently suspended from sales for version upgrades. It is a differential pressure leak tester widely used for automotive parts, electrical components, food packaging, and medical devices. We also design and manufacture dedicated machines, including work and master set fixtures, so please feel free to consult with us. 【Reasons for Choosing Us】 - By adopting an air-operated valve main valve, it can be used stably without being affected by heat generation. - The large orifice diameter of the air-operated valve allows for reduced measurement time. It uses a diaphragm-type differential pressure sensor, which is highly sensitive and reliable. - It has a built-in automatic zero-point compensation circuit, enabling stable measurements over long periods. - It calculates the work volume, test time, and differential pressure, displaying the leakage amount digitally. - It has a built-in self-check function that alerts you with an error display and alarm if there are abnormalities in the zero point or pressure. For more details, please download the catalog or contact us.

Company：ハムロン・テック
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

473 ICI Shape Mace Snag Tester

It is a testing machine that evaluates the degree to which the thread protrudes and causes pulling due to the hooking action.

- This is a testing machine for conducting the A method (ICI type mace test method) of the snag test for woven and knitted fabrics. - It is suitable for woven and knitted fabrics, excluding lightweight and coarse density fabrics. - The test specimen, sewn in a cylindrical shape, is wrapped around the rotating cylinder with the outer side facing out. - The distance between the mace (spike ball) and the guiding rod of the testing machine is checked, and the rotating cylinder is turned 100 times at a speed of 60 revolutions per minute. - After the test, the specimen is evaluated by comparing it with standard snag evaluation photographs using a judgment cabinet. <Reference Standards> JIS-L1058, ASTM-D3939 【Regarding Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Image Processing Equipment
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

153 Gel Time Tester (Magnetic Type)

This is a testing machine (gelation testing machine) for easily measuring the gelation time of thermosetting resins.

- This is a testing machine (gelation tester) for easily measuring the gelation time of thermosetting resins. - The operation panel of the conventional machine has been upgraded to a touch panel, improving usability. - The rotor is rotated inside a test tube containing the sample, and when the gelation of the sample progresses and a certain torque is applied to the rotor, the rotor drops due to the magnetic coupling mechanism, stopping the timer. 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

162-S5 5-Channel Slip Tester

It is a testing machine (slip angle measurement device) that measures the angle of inclination at which test specimens such as plastic films and paper begin to slide (static friction coefficient) using the inclined plane method.

- This is a testing machine (slip angle measurement device) that measures the angle of inclination at which test specimens such as plastic films and paper begin to slide (static friction coefficient) using the inclined plane method. - It is capable of testing up to five specimens at once, and the touch panel can calculate and print the average value of the five specimens tested. - With the inclination angle set to zero, the test specimen attached to the inclined plate is brought into close contact with the test specimen attached to the weight. - The inclined plate is tilted at a constant speed, and the tangent of the angle (tanθ) at which the test specimen attached to the weight begins to slide is calculated to determine the static friction coefficient. <Reference Standards> JIS-P8147, ASTM-D1894, D3248, TAPPI-(T503), (T542), T815 [Regarding Catalog Download] Please request the catalog from the related links below or contact us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

162-OY O・Y Pull Slip Tester

This is a testing machine for measuring tensile load as an indicator of the slip resistance of flooring materials.

- This is a testing machine (O-Y⋅PSM) for measuring tensile load as an indicator to evaluate the slip resistance of flooring materials. - A specified vertical load is applied to the test specimen from above the specified slip piece, and it is immediately pulled in a diagonal upward direction at a specified tensile load speed of 18°. - The maximum tensile load at which the slip piece begins to slide is measured, and the slip resistance coefficient (C.S.R) is calculated. - The optional specification also allows for slip resistance testing of ceramic tiles (ceramic wet tiles). - By measuring extremely small tensile loads, it is also possible to calculate the slip resistance coefficient (C.S.R⋅B) applicable to tiles used in areas where people walk barefoot, in addition to the conventional slip resistance coefficient (C.S.R). <Reference Standards> JIS-A1454, A1509-12 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

162 Slip Tester

A testing machine that measures the inclination angle at which test specimens such as plastic films and paper begin to slide, using the inclined plane method (slip inclination angle measuring device, friction measuring device, friction angle measuring device).

- This is a testing machine (slip angle measurement device, friction measurement device, friction angle measurement device) that measures the angle of inclination at which test specimens such as plastic films and paper begin to slide (static friction coefficient) using the inclined plane method. - In a state where the inclination angle is set to zero, the test specimen attached to the inclined plate is brought into close contact with the test specimen attached to the weight. - The inclined plate is tilted at a constant speed, and the tangent of the angle (tanθ) at which the test specimen attached to the weight begins to slide is calculated, which is used as the static friction coefficient. - The photo shows the "heat plate specification (optional)." <Reference Standards> JIS-P8147, ASTM-D1894, D3248, TAPPI-(T503), (T542), T815 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Other measurement, recording and measuring instruments
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

270-L Loss Flexing Tester (with Low Temperature Chamber)

We will observe the growth of cracks due to the bending of rubber in a low-temperature chamber and evaluate its durability.

- This is a bending testing machine that observes the growth of cracks due to the bending of rubber in a low-temperature chamber and evaluates durability. - The average number of bends is calculated for every 100% increase from the original length of the hole opened in the test specimen until it reaches 500%, which is used to determine durability. <Reference Standard> ASTM-D1052 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

183-BT Ball Tack Tester

This is an inclined ball tack tester for a simple evaluation of the adhesive properties of adhesive tape.

- This is a testing machine for the simple evaluation of the adhesive properties of adhesive tape and adhesive sheets. - By changing the size of the ball and rolling it repeatedly from a specified position on the inclined plate, we find the largest ball that stops within the measurement area (the ball does not move for more than 5 seconds). - There is also a type that allows the angle of inclination to be changed from 15° to 45° (variable type). <Reference Standard> JIS-Z0237 【Regarding Catalog Download】 Please request the catalog from the related links below or through inquiries. *For products that do not have a standalone catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Other measurement, recording and measuring instruments
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

162-EW Slip Tester (for Enamel Wire)

This is a testing machine that measures the angle of inclination (static friction coefficient) at which an enamel wire specimen begins to slide using the inclined plane method.

- This is a testing machine that measures the inclination angle (static friction coefficient) at which an enamel wire specimen begins to slide using the inclined plane method. - Two samples are fixed in parallel to the friction block, and two samples are also fixed in parallel to the inclined plate, applying tension. - With the inclination angle set to zero, the friction block is positioned so that the samples fixed to the friction block and the inclined plate intersect vertically, and the angle at which the friction block begins to slide is measured as the inclined plate is tilted at a constant speed. - The tangent (tanθ) is calculated from the measured angle, which is then used as the static friction coefficient. - We also have a slip tester No. 162-EWD that automates the process from measuring the inclination angle to calculating the static friction coefficient. 【Regarding Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Other environmental analysis equipment
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

552 Gardner-style Washability Tester

This is a testing machine for evaluating the washability and moisture abrasion resistance of coatings, such as the amount of coating mass loss.

- This is a testing machine (cleaning test machine, cleaning test device, wet abrasion test device, abrasion resistance test device) for evaluating the washability and wet abrasion resistance of coatings. - The test specimen is fixed in the test tank with the coated surface facing up, a cleaning solution is applied, and it is left to stand for 60 seconds before being scrubbed back and forth with a specified brush or abrasive pad for a specified number of cycles. - After removing the test specimen and washing it with tap water, the presence of coating damage or exposure of the substrate due to wear is examined, and the amount of mass loss of the coating is calculated. <Reference Standards> JIS-A6909, K3920, (K5400), K5600-5-11, K5660, K5663, K5667, K5668, ISO-11998 *Specifications are subject to change without notice. *For more details, please refer to the PDF materials or feel free to contact us. 【Regarding Catalog Download】 Please request the catalog from the related links below or through inquiries. *For products without a standalone catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tester Product List and Ranking from 316 Manufacturers, Suppliers and Companies | IPROS GMS

Tester Manufacturer, Suppliers and Company Rankings

Tester Product ranking