We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Testing Machine.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Testing Machine Product List and Ranking from 762 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

Testing Machine Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

  1. 東洋精機製作所 Tokyo//Testing, Analysis and Measurement
  2. TOKYO KOKI TESTING MACHINE CO.LTD. Kanagawa//Testing, Analysis and Measurement
  3. 日本ビジネスロジスティクス（JBL） 藤沢北事業所 Kanagawa//Testing, Analysis and Measurement
  4. 4 null/null
  5. 5 アイ・ティー・エス・ジャパン Chiba//Testing, Analysis and Measurement
Go to Company Ranking

Testing Machine Product ranking

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

  1. [Technical Report] Introduction to the Composite Environmental Vibration Testing Equipment
  2. Invitation to Exhibit at the 2026 NAGOYA Automotive Technology Exhibition
  3. Vibration Diagnosis Unit "VD-unit" Operation Case Studies ＩＭＶ
  4. 4 Manufacturing of thermal shock testing machines and heating and cooling testing machines. 松澤製作所
  5. 5 Extended warranty service "HP Care Pack" 日本HP

Testing Machine Product List

451～480 item / All 3621 items

Displayed results
119 Demachar Bending Test Machine

119 Demachar Bending Test Machine

This is a testing machine to measure the bending fatigue of rubber.

- A demach bending testing machine that applies repeated bending deformation to vulcanized rubber and thermoplastic rubber to measure crack initiation and crack growth. - The test specimen is fixed in upper and lower chucks arranged in parallel and bent by reciprocating motion in the same plane. <Reference Standards> JIS-K6260, ASTM-D813, BS-903, ISO-132 [About Catalog Download] Please request a catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
181 Film Impact Tester

181 Film Impact Tester

This is a testing machine for evaluating the puncture impact strength of plastic films, paper, and similar materials.

- This is a testing machine for evaluating the impact strength of plastic films, paper, and similar materials. - We also offer an L-type model for testing in a low-temperature chamber. - Attach the test specimen to the adjusted testing machine and release the pendulum. - The hemispherical impact ball attached to the tip of the pendulum directly reads the amount of work required to create a hole in the test specimen from the scale. - There is also a low-temperature chamber type [181-L] that can conduct tests in environments ranging from -30 to 60 degrees. <Reference Standard> ASTM-D3420 <Regarding Catalog Download> Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
163 Enamel Wire Softness Tester

163 Enamel Wire Softness Tester

There are two types: the helical coil rewind angle method and the spring back method.

<Helical Coil Return Angle Method> - Wrap the specimen around the mandrel 5 times at the specified rotation speed, mark it, and then remove the weight. - Slowly release the tension and read the scale of the return angle at the end of the 5th turn to evaluate softness. <Reference Standards> C3216-3, IEC-60851-3 <Spring Back Method> - Insert one end of the specimen into the stop hole to be wrapped around the mandrel, and hang a weight from the other end. - Wrap the specimen around the mandrel 3 times at a rotation speed of 5 to 10 times per minute, mark it, and then remove the weight. - Slowly return the specimen wrapped around the mandrel and read the scale at the position where the mark stopped to evaluate softness. <Reference Standards> JIS-(C3003), C3216-3 (Appendix JA Alternative Test Method), IEC-60851-3 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
201-R Vinyl Leather Cross Cold Resistance Testing Machine (with Freezer)

201-R Vinyl Leather Cross Cold Resistance Testing Machine (with Freezer)

This is a cold-resistant testing machine for vinyl leather cloth that adopts a refrigeration type.

- This is a vinyl leather cloth cold resistance testing machine that uses a refrigeration method instead of dry ice. - It is a testing machine (cold resistance testing machine, cold resistance testing device) for conducting cold resistance tests on vinyl leather cloth, plastic, rubber-coated fabrics, etc. - The test specimen is fixed in the chuck of the specimen holder, and it is installed so that the specimen is positioned at the center of the anvil in the low-temperature chamber. - After installation in the low-temperature chamber, a drop weight is released after 5 minutes to check for any cracks in the test specimen. - By rotating the specimen holder, up to 6 specimens can be tested continuously. <Reference Standards> JIS-K6404-13, (K6404-13), K6772, ISO-4675 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
310 Krem Water Absorption Tester

310 Krem Water Absorption Tester

This is a testing device (Klem water absorption measurement device) for evaluating the water absorption of highly water-absorbent paper and board according to the Klem method.

- The Kremer method evaluates the water absorption of highly absorbent paper and board. - It also complies with the Birek method for testing the water absorption of textile products. - The lower end of the vertically suspended test specimen is immersed in water, and the height to which water rises in 10 minutes due to capillary action is measured. <Reference Standards> JIS-L1907, P8141 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
312 Tapered Stefnest Tester

312 Tapered Stefnest Tester

This is a testing machine (Tapered Strength Tester) used to evaluate the brittleness of cardboard using the load bending method.

- The strength of the paperboard is evaluated using the load bending method. - One end of the test specimen is attached to a chuck to create a cantilever beam, and the other end is bent at a specified speed to 15°. - The force required to bend the specimen when the load length reaches 50mm is read from the load scale. - The bending moment and bending resistance are calculated from the read load scale. - A digital type that allows for direct reading of the strength of the paperboard, model [312-D], is also available. <Reference Standards> JIS-P8125, TAPPI-T489, ISO-2493 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
323-AUTO Galley-type Densitometer (Automatic)

323-AUTO Galley-type Densitometer (Automatic)

Automatic display of air permeability resistance and ISO permeability! A gauge-type densitometer (gauge-type air permeability testing machine, permeability testing machine) that can be operated via a touch panel.

- This is a Gurley-type densitometer (Gurley air permeability testing machine, air permeability tester) that evaluates the air permeability of paper, board, woolen fabrics, etc., according to the Gurley test method. - It is an automatic type with a digital timer. - The air resistance (s) and ISO air permeability (µm/(Pa⋅s)) are automatically displayed on the touch panel. <Reference Standards> JIS-L1096, P8117, ASTM-D726, TAPPI-T460, ISO-5636-5 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
433 Scott-type Abrasion Resistance Testing Machine

433 Scott-type Abrasion Resistance Testing Machine

According to the Scott method, we conduct rubbing tests on textiles, rubber, plastic sheets, and other materials.

- The Scott-type method is used to conduct abrasion tests on textiles, rubber, plastic sheets, etc. using a Scott-type testing machine. - The loading method is spring-based. - The test specimen is fixed in two chucks spaced at a specified distance, and while applying a constant pressing load from one side of the chuck, it is subjected to reciprocating friction at a speed of 120±2 times per minute over a specified distance. - The number of times the width of the test specimen is reduced by 10 to 15 mm is measured and evaluated as abrasion resistance. <Reference Standards> JIS-K6404-6, (K6404-6), L1096, JASO 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
445 Elmerndorf-type fabric tearing strength testing machine

445 Elmerndorf-type fabric tearing strength testing machine

This is a testing machine for evaluating the tear strength of fabrics, rubber, plastic sheeting, and other materials.

- The tear strength of fabrics, rubber, plastic tear strips, etc., is evaluated using Method D (Pendulum Method) of the tear strength test. - A 20mm incision is made after the test specimen is attached. - The pendulum in the shape of a sector is swung down from a certain height to tear the test specimen. - The value indicated by the pointer is read directly from the scale and is considered the tear strength. <Reference Standards> JIS-(K6404-4), K6404-2, (L1018), (L1085), L1096, ISO-9290 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
476 Cantilever Type Flexibility Testing Machine

476 Cantilever Type Flexibility Testing Machine

This is a 45° cantilever-type testing machine for evaluating the rigidity and flexibility of fabrics and knitted materials.

- This is a cantilever-type testing machine that evaluates the rigidity and flexibility of textiles using the 45° cantilever method. - A test specimen is placed on a water level with a 45° incline, and it is slid in the direction of the slope. The position of the end of the specimen that is not in contact with the slope is read using a scale when the other end touches the slope. - There is also a more accurate testing machine, the [476-M], which automates the sliding motion of the specimen. <Reference Standards> JIS-(L1018), L1096, (JASO) 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
553-S Pencil Scratch Hardness Tester (Manual)

553-S Pencil Scratch Hardness Tester (Manual)

It is a testing device (handheld pencil scratch hardness tester) that easily measures the scratch hardness of coatings using the pencil method.

- A load of 750g is applied to the tip of a pencil mounted at a 45° angle to the coated surface. - The specified pencil is attached to the testing machine, and after the tip of the pencil is placed on the test specimen, it is pressed for at least 7mm at a speed of 0.5 to 1.0mm per second for testing. - After the test, the indentation on the test specimen is examined visually for evaluation. <Reference Standard> JIS-K5600-5-4 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
549 No Pickup Time Tester

549 No Pickup Time Tester

Test equipment (test roll) suitable for evaluating the drying properties of road marking paint and tire adhesion.

- This is a testing machine (test roll) for evaluating the drying properties and tire adhesion of road marking paint. - A sample is applied to a glass plate with a specified width to create a test piece. After a specified time has elapsed, it is rolled at a constant speed to pass through the specified width of the sample in one second. - The presence of the paint film on the tire after rolling is visually inspected and evaluated. <Reference Standards> JIS-K5665, ASTM-D711 *Specifications are subject to change without notice. [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
516 Eriksen Coating Strength Tester (Manual)

516 Eriksen Coating Strength Tester (Manual)

This is a testing machine for evaluating the resistance of coatings to cupping using methods such as the fixed distance method and the fracture distance method.

- This is a testing machine (cupping tester, cupping test device, Erichsen tester) for evaluating the cupping resistance of coatings. - The test specimen is fixed between the holding ring and the die, and the zero point is set where the tip of the punch contacts the test specimen. - The test is conducted by either pressing to a specified depth at a speed of 0.2±0.1mm per minute (constant distance method) or by pressing the punch until cracks or peeling of the coating are observed in the area being pressed (break distance method). - In the constant distance method, the cracking of the coating and peeling from the substrate are evaluated, while in the break distance method, the distance the punch is pressed is measured and evaluated as the Erichsen value. <Reference Standards> JIS-B7729, (K5400), K5600-5-2, Z2247, ISO-1520, 20482 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
514 Coating Film Bending Tester

514 Coating Film Bending Tester

This is a testing machine for evaluating the bending resistance of coatings using the cylindrical mandrel method.

- This is a testing device (coating bending tester, bending test apparatus, resistance to bending tester) for evaluating the bending resistance of coatings such as paints and varnishes using the cylindrical mandrel method. - Fully expand the test receiving plate and attach the mandrel. Insert the test plate, which has been painted and subjected to the specified curing, between the test receiving plate and the mandrel with the painted surface facing outward, and bend it 180° over a period of 1 to 2 seconds. - After bending, check the test plate in its bent state and evaluate the cracking of the coating and the resistance to peeling from the metal substrate as the bending resistance. <Reference Standards> JIS-(K5400), K5600-5-1, ISO-1519 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
546 Automatic Hoover Marler

546 Automatic Hoover Marler

Adopting the Hoover-style muller method! Ideal for mixing and dispersing pigments!

- It is a machine (Hoover muller, Hoover-type muller, automatic Hoover muller) that mixes and disperses pigments with a vehicle between two frosted glass discs using the Hoover-type muller method. - The dispersibility will be examined using a grind meter (particle size measuring device). <Reference Standard> JIS-K5101 *Specifications are subject to change without notice. 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
145-G Gamer Twist Testing Machine

145-G Gamer Twist Testing Machine

This is a testing machine for conducting low-temperature torsion tests to determine the torsional rigidity of vulcanized rubber and thermoplastic rubber.

- This is a testing machine (Germann torsion tester) used to determine the torsional rigidity of vulcanized rubber and thermoplastic rubber by conducting a low-temperature torsion test (Germann torsion test). - It is connected to a wire with a constant torsional constant, and the angle after a 180° rotation is recorded 10 seconds later. This operation is performed within a range from 23° to the minimum temperature, and the temperatures T2, T5, T10, and T100 at which the specific modulus becomes 2, 5, 10, and 100 are determined from the temperature-twist angle curve. <Reference Standards> JIS-K6261, ISO-1432 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
151 DIN Wear Testing Machine

151 DIN Wear Testing Machine

Both Method A, which does not rotate the test piece during wear, and Method B, which rotates the test piece, are supported!

- This is a testing machine for the abrasion of vulcanized rubber and thermoplastic rubber. - It supports both Method A, which does not rotate the test piece during abrasion, and Method B, which rotates the test piece. - It is mainly used for evaluating the wear resistance of tires, belts, and similar products. - The test piece is pressed against the wear surface of a rotating drum wrapped with abrasive cloth under a constant load, and while the drum rotates at a specified speed, the test piece is moved laterally to cause abrasion. - After abrading to the specified wear distance, the mass is measured. - The wear amount is calculated from the mass of the test piece before and after abrasion, and the specific wear volume and wear resistance index are calculated. - A low-temperature chamber version can also be produced. <Reference Standards> JIS-K6264-2, ISO-4649, DIN-53 516 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other inspection equipment and devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
185-AUTO Heating Deformation Testing Machine (Automatic)

185-AUTO Heating Deformation Testing Machine (Automatic)

Touch panel operation! Automatic heating deformation testing of rubber and plastic insulated wires!

- This is a testing machine that automatically conducts heating deformation tests for rubber and plastic insulated wires. - You can set the preheating time and test time on the touch panel, and it automatically performs a series of processes from loading and unloading operations to displaying and printing test data. <Reference Standards> JIS-C3005, C3307, K6723, ASTM-D621 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other inspection equipment and devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
252-UL-94 Plastic Combustibility Testing Machine (Electric)

252-UL-94 Plastic Combustibility Testing Machine (Electric)

This is a testing machine for evaluating the flame resistance of plastics (test chamber with ventilation hood, UL94 combustion test chamber, UL-94 testing machine).

- This is a testing machine for evaluating the flame resistance of plastics (test chamber with ventilation hood, UL94 combustion test chamber, UL-94 testing machine). - It is equipped to perform horizontal burning tests (HB) or vertical burning tests (V-1, V-2) as standard. - The specimen is ignited using a burner, and the time is measured. The position of the burner can be adjusted from an external handle for safety, depending on the combustion state of the specimen. - Other combustion tests (5V, VTM, HBF, HF) can also be easily conducted using optional supporting fixtures. - In addition to the manual type, there is also an electric type available. - In the electric type, the position of the burner is adjusted using a jog dial controller according to the combustion state of the specimen during the test. - The touch panel provides voice guidance to navigate the operating procedures according to the testing method. <Reference Standards> UL-94, JIS-K6911, ASTM-D635, D3801, D4804, D5025, D5207, ISO-1210 【Regarding Catalog Download】 Please request the catalog from the related links below or through inquiries. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
258-UTL Shock Testing Machine (with Ultra-Low Temperature Chamber)

258-UTL Shock Testing Machine (with Ultra-Low Temperature Chamber)

It is possible to lower the temperature to an ultra-low -50℃! The double doors reduce temperature fluctuations inside the chamber!

- This is a pendulum impact testing machine that conducts Charpy impact tests and Izod impact tests in a cryogenic chamber. - The low-temperature chamber has two doors, allowing test specimens to be mounted from the outside while the inner door is closed, thereby reducing temperature changes inside the chamber. - This product can achieve ultra-low temperatures down to -50°C. <Reference Standards> JIS-K7110, K7111-1, ASTM-D256, D6110, ISO-179-1:2010, 180 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
307-L MIT Flexural Resistance Testing Machine (with Low Temperature Chamber)

307-L MIT Flexural Resistance Testing Machine (with Low Temperature Chamber)

Evaluates the fold strength of paper and cardboard in a low-temperature chamber ranging from -35 to 60 °C. Also applicable to automatic folding tests of metal foils such as aluminum.

- This is a testing machine (folding resistance testing machine, MIT testing machine, MIT type testing machine, MIT type folding resistance testing machine, folding fatigue testing machine) used to evaluate the folding resistance of materials such as paper and board, plastic films, and flexible printed circuit boards (FPC). - Tests are conducted in a low-temperature chamber (refrigeration type) at -35 to 60 °C. - It is also used for automatic folding tests of metal foils such as aluminum. - The test involves applying a specified load while pulling the specimen and folding it back and forth at a specified speed to the left and right at 135° until the specimen breaks. - The folding resistance is calculated from the number of back-and-forth folds until breakage occurs. - The load is applied using a dead weight system. <Reference Standards> JIS-C5016, P8115, R3420, ASTM-D2176, TAPPI-T511, ISO-5626 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
121-RA Brittleness Temperature Testing Machine (with Freezer, Automatic Holder Rotation)

121-RA Brittleness Temperature Testing Machine (with Freezer, Automatic Holder Rotation)

Up to 4 consecutive tests possible! A brittleness temperature testing machine using a rotary holder!

- This is a brittle temperature testing machine that employs a rotary holder instead of a single-station specimen gripping device (specimen holder, sample holder) to fix the test specimen. - Low-temperature conditions are automatically generated using a refrigeration unit. - Since it uses a rotary holder, it can conduct up to four consecutive tests, and it is also possible to set the test conditions (test temperature, immersion time) for four tests from the touch panel. - The test chamber filled with heat transfer medium is cooled and prepared, and after immersing the test specimen fixed in the specimen gripping device in the heat transfer medium for the specified time, an impact is applied using a striking hammer. - The presence or absence of fracture in the test specimen is used to calculate the 50% impact embrittlement temperature and the impact embrittlement limit temperature. <Reference Standards> JIS-C3005, K6261, K6723, K7216, ASTM-D746, D2137, ISO-812, 974 【Regarding Catalog Download】 Please request the catalog from the related links below or through inquiries. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
121-AUTO Crisping Temperature Tester (Fully Automatic)

121-AUTO Crisping Temperature Tester (Fully Automatic)

Complete automation of the testing process using robotic mechanisms! Capable of reaching -70°C using a freezer!

- This testing machine fully automates the process of low-temperature impact embrittlement testing (embrittlement temperature testing) using a robotic mechanism. - Low-temperature conditions are created using a refrigeration unit. - The embrittlement temperature testing machine applies impact bending to plastic and rubber materials under low-temperature conditions using a cantilever beam. - By setting the specimen attached to the specimen gripping device (specimen holder) in the cassette and simply inputting the test conditions on dedicated software on a PC, up to 40 tests can be conducted continuously. <Reference Standards> JIS-C3005, K6261, K6723, K7216, ASTM-D746, D2137, ISO-812, 974 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
145-D Retention Force Testing Machine

145-D Retention Force Testing Machine

Evaluate the holding power (slip resistance) of adhesive tape and adhesive sheets! There are also plenty of optional features!

- This is a testing machine used to evaluate the holding power (slip resistance) of adhesive tape and adhesive sheets. - The test specimen is attached to one end of the test plate so that a specified area is in contact, and then it is pressed with a roller. - Within one minute after pressing, the test plate is attached to the testing machine, and a specified load is applied to the end of the test specimen that hangs vertically. - The time until the test specimen completely falls off the test plate, or the distance the test specimen has slipped after a certain period, is measured. - Preheating time can be set. - Falling time can be measured. - Equipped with a timer for setting test duration. <Reference Standard> JIS-Z0237 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a separate catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
151-H DIN Wear Testing Machine (with Constant Temperature Chamber)

151-H DIN Wear Testing Machine (with Constant Temperature Chamber)

Supports up to 100℃! Easy operation with a touch panel!

- This is a testing machine for wear of vulcanized rubber and thermoplastic rubber equipped with a constant temperature chamber. - It can accommodate temperatures up to 100°C. - It supports both Method A, which does not rotate the test specimen during wear, and Method B, which rotates the test specimen. - It is equipped with a touch panel, making it easy to operate the tests and calculate test results. <Reference Standards> JIS-K6264-2, ISO-4649, DIN-53 516 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
152 Akron Rubber Wear Testing Machine

152 Akron Rubber Wear Testing Machine

This is an Akron abrasion testing machine for evaluating the wear resistance of vulcanized rubber and thermoplastic rubber.

- This is a testing machine for evaluating the wear resistance of vulcanized rubber and thermoplastic rubber. - The circumferential surface of a rotating disc-shaped test piece is pressed against the circumferential surface of a grinding wheel under a constant load, with a fixed angle of inclination applied to the rotating axis to induce wear, and the wear mass is measured. - It is mainly used for tires, shoe soles, and similar applications. <Reference Standards> JIS-K6264-2, ISO-4649 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
183 Drop Ball Impact Testing Machine

183 Drop Ball Impact Testing Machine

It is a testing machine (drop ball tester, drop ball impact tester) used to evaluate the impact resistance of rigid plastics, coatings, and other materials.

- This is a testing machine (drop ball tester, drop impact tester) used to evaluate the impact resistance of coatings and similar materials. - A specified weight (striker) held by a magnet holder (or air holder) is dropped from a predetermined height onto the test specimen, and the failure condition of the specimen (cracking, peeling) is observed. <Reference Standards> JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
185 Heating Deformation Testing Machine

185 Heating Deformation Testing Machine

This is a testing machine that calculates the reduction rate of rubber and plastic insulated wires based on the thickness of the test specimens before and after heating.

- This is a testing machine (heating deformation testing machine) for conducting heating deformation tests on rubber and plastic insulated wires. - The thickness of the test specimen is measured, and it is placed in a test device heated to a specified temperature for a specified time. - Next, the test specimen is placed between parallel plates, subjected to a specified load, and further heated, after which its thickness is measured in that state. - The reduction rate (heating deformation rate) is calculated from the thickness of the test specimen before and after heating. - The temperature can be set up to a maximum of 200°C. <Reference Standards> JIS-C3005, C3307, K6723, ASTM-D621 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
199 Insulation Breakdown Voltage Test Machine [for Insulating Films and Enamel Wires]

199 Insulation Breakdown Voltage Test Machine [for Insulating Films and Enamel Wires]

It is a testing machine (insulation resistance tester, dielectric strength tester) for evaluating the insulation strength of solid electrical insulating materials, including the insulation film between the positive and negative electrodes of lithium-ion batteries!

- This is a testing machine for evaluating the insulation strength of solid electrical insulating materials (insulation strength testing machine, dielectric strength testing machine). - By changing the electrodes, it can accommodate test specimens such as plates, sheets, fabrics, films, tapes, tubes, varnishes, and coatings. - Recently, it has also been used for the insulation films between the positive and negative electrodes inside lithium-ion batteries. - Even if the test specimen is enameled wire, by changing the electrodes, insulation breakdown tests can be conducted using the metal foil method or the two-electrode method. - It supports both continuous voltage increase method and step voltage increase method. - It is also compatible with guarantee tests and dielectric strength tests. <Reference Standards> JIS-C2110, (C3003), C3216-5, IEC-60851-5 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
210 Magnet Wire Wear Testing Machine

210 Magnet Wire Wear Testing Machine

It is a testing machine (wear testing machine) for evaluating the wear resistance of enamel wire using the blade reciprocating method.

- This is a testing machine (wear testing machine) for evaluating the wear resistance of enamel wire using the blade reciprocating method. - Attach the test specimen, remove the insulation coating from one end, and connect the test specimen conduction cable. - Lower the blade onto the test specimen, apply a specified load, and move the blade back and forth to wear down the insulation coating of the test specimen. - Measure the number of cycles until conduction occurs, which will determine the wear resistance. - By rotating the test specimen, measurements can be taken three or four times with the same specimen. <Reference Standards> NEMA-C9.5, JASO, ISO-6722 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Testing Machine

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.