Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
1921～1950 item / All 3611 items
It is possible to install up to 16 samples!
You can observe the occurrence and growth of mold. It is possible to conduct tests with controlled temperatures (both heating and cooling types). There is an inspection window on the door of the chamber where the samples are placed, allowing you to rotate the holder without opening the chamber, so you can observe all samples without interrupting the test.
Tabletop universal testing machine for compression, bending, shear, tearing, plastic, film, paper, packaging materials, non-woven fabric, peel testing, compatible with other company jigs.
★ Tinius Olsen Company (USA) ◎ Single frame tensile testing machine 1kN to 5kN ◎ Dual (twin) frame tensile testing machine 10kN to 1500kN ◎ Hydraulic testing machine Max 3000kN ◎ Various extensometers (video, LVDT, etc.) ◎ Compatible with other company's jigs ◎ Over 3000 types of gripping jigs *For more details, please contact us. 03-3865-5906
Tabletop universal testing machine for compression, bending, shear, tearing, plastic, film, paper, packaging materials, non-woven fabric, peel testing, compatible with other company jigs.
Dual (Twin) Column: Three types of base systems: 10KN, 25KN, and 50KN - S type operable via touch panel - T type controlled by PC Compatible with various testing modes such as tension, compression, bending, shear, and tearing, the latest design can accommodate a wide range of material tests including plastics, films, paper, packaging materials, non-woven fabrics, filter materials, felt, leather, adhesives, food, toys, and medical products. *For more details, please contact us at 03-3865-5906.
Charpy impact test, Izod impact test, plastic, low impact
★ Tinius Olsen Inc. (USA) - IT Series Low-Capacity Impact Testing Machine - Versatile and easy to operate - Capable of testing either Charpy or Izod without changing the configuration - Mechanism designed aerodynamically to eliminate the effects of wind loss - The capacity of the pendulum can be easily changed by adding weights - Energy displayed in real-time - Data acquisition and analysis using Horizon software - The "Low Impact" feature allows for testing and evaluation of energy levels at low collision speeds.
DMA testing and fatigue testing can be performed with a single device! A viscoelastic measurement testing machine that supports higher loads.
The "DMA+1000/2000" is a dynamic testing system capable of conducting fatigue tests on development materials and industrial components, as well as analyzing viscoelastic properties. It allows for the evaluation of a large volume of material assessments and the dependence of various parameters such as frequency, temperature, stress, strain, waveform, and environment on mechanical properties. This product provides highly accurate material behavior data across a wide range of analyses. 【Features】 ■ High-strength single test frame ■ Electric dynamic vibrator capable of applying high loads ■ Testing possible at high frequencies ■ Good sensitivity at low strain and low load ■ Capable of applying high strain and high loads *For more details, please refer to the PDF materials or feel free to contact us.
This is a power cycle testing device essential for the reliability testing of power semiconductors.
This device consumes a specified amount of power from the sample (IGBT, IPM, SiC, GaN, Diode, etc.), performs intermittent power supply within a designated time, and conducts reliability testing of the sample. It also allows for thermal resistance measurement, and the data is transferred to the HOST PC.
The latest model Sigma meets a wide range of bonding strength measurement needs with just one unit, leading the global market.
The latest model from Dutch company XYZTEC. Equipped with a rotary head capable of accommodating six sensors, it boasts excellent operability, measurement accuracy, and multifunctionality, overwhelming competitors and achieving high cost performance. The rotary measurement head, high-speed operating stage, and rotary share sensor contribute to reduced work time. It also comes standard with a simplified pattern recognition automatic measurement function. By adding an optional image processing function, it can support more advanced automatic measurement and automatic recognition of failure modes. It has been widely adopted by major semiconductor, power device, and various electronic device manufacturers in Japan and around the world.
A compact yet highly versatile electric furnace.
The new TF tube furnace series from Carbolite Gero incorporates high-quality heating elements and innovative insulation design, achieving the best performance and high versatility while keeping both the housing temperature and power consumption low. The TF series is designed with flexibility in mind. By using slide-in accessory work tubes and tube adapters, a single furnace can accommodate tubes of various diameters, and the work tube itself can be easily replaced to meet the physical or chemical requirements of the process. With the optional work tube package, users can utilize the TF for heat treatment under vacuum or modified atmospheres.
The Carbolite Gero high-temperature tube furnace HTRH can be used horizontally at a maximum temperature of 1800°C.
High-quality insulation materials with low thermal conductivity enable low energy consumption and rapid heating. The insulation material and molybdenum disilicide (MoSi2) heater element are housed in a rectangular casing. The heater element is suspended vertically, making it easy to replace. At high temperatures and in the presence of oxygen, MoSi2 forms an oxide layer (SiO2) that protects the heater element from thermal and chemical corrosion. The 3-zone tube furnace (HTRH-3) achieves higher uniformity compared to single-zone products. These models are equipped with dedicated thermocouples and temperature controllers for each heating zone, making them particularly convenient for preheating gases necessary for reactions within the system. The HTRH does not come with a working tube built-in. The working tube can be selected as an additional accessory. The length of the working tube varies depending on the application and whether a modified atmosphere or vacuum is used.
Carbolite Gero's new TS series split tube furnace.
The main body of the TS furnace is divided into two parts and is secured with hinges at the rear. A gas damper at the end provides smooth opening and closing operations. By allowing the furnace to be split, it becomes easier to equip it with an end flange that makes insertion into undivided furnaces difficult when using containers such as reactors, and it also simplifies the replacement of working tubes. The TS series is designed with flexibility in mind. By using slide-in accessory working tubes and adapters, a single furnace can accommodate tubes of various diameters, and the working tube itself can be easily replaced to meet the physical or chemical requirements of the process. An optional working tube package allows users to use the TS for heat treatment under vacuum or modified atmospheres.
The split-type tubular furnace, HTRV-A model, can achieve a maximum temperature of 1700°C for heat treatment when used in a vertical or horizontal position.
The split-type heating module makes it easy to mount the working tube and the reaction vessel with a fixed end flange. Due to its separable structure, it can also enhance the cooling rate of the samples. The control thermocouple is mounted in the center of the heating area. Cooling grooves are incorporated into the housing to promote convective cooling of the external casing. The split furnace body consists of high-grade insulation plates and vertically installed molybdenum disilicide heating elements. When the furnace body is opened, a safety switch activates, cutting off the power to the heating elements, ensuring the safety of the operator. To allow for installation on self-owned equipment, it is standard without a stand. It can be made self-supporting with an optional L-shaped stand.
A light multi-wavelength testing device that can use detachable multi-wavelength light sources.
A light multi-wavelength testing device that can use detachable multi-wavelength light sources. A light testing device capable of gigabit modulated light output and high-speed modulated light reception. 【Functions】 - Built-in light sources such as DFB-LD light sources for long-wavelength CWDM according to specified ITU standards or VCSELs for short-wavelength bands. - Has monitoring and display functions for current and other parameters for the DFB-LD light source and PD reception. - Equipped with an LD driver circuit and reception circuit capable of modulation up to 2 Gbps. - Operates on a 100V power supply. *For more details, please contact us for materials.
Standard yet authoritative.
It is the most basic testing machine for evaluating the moisture resistance of metals and surface treatments.
Tabletop xenon weathering test machine.
It is a tabletop xenon light resistance testing machine. It is ideal for testing small quantities of samples such as pharmaceuticals, paper, cosmetics, chemicals, food, and stationery.
Testing for dust intrusion in automotive parts.
It is a floating dust-proof or dust-resistant testing machine that examines the durability of automotive parts and electrical components against dust and debris.
Testing for the intrusion of wind and rain into automotive parts.
We will test the intrusion of wind and rain into automotive parts. We will test the water resistance and waterproofing of automotive parts when exposed to wind, rain, and water splashes from the outside.
Reproducing paint scratches caused by flying stones.
This is a testing device that simulates damage to a car's paint and brake tubes caused by stones while driving. There is a standard temperature type for testing at room temperature and a low-temperature type for testing at low temperatures.
Combustibility Tester MVSS-2
It is a combustion testing device (combustion tester) compliant with FMVSS (Federal Motor Vehicle Safety Standards). It measures the combustion rate of organic materials used as interior materials in automobiles and aircraft in a horizontal position.
Oxygen Index Combustibility Tester ON-2M
This is a combustion tester (combustion testing machine) that quantifies combustibility using the oxygen index. It burns organic materials such as plastics, fibers, and rubber in a mixed gas of oxygen and nitrogen, varying the mixture ratio to measure the minimum oxygen concentration required for combustion and determine combustibility (flame retardancy).
Dye Fastness Washing Test Machine (Air Heating Method) LMA-20
It is used for washing tests of textile products (soap, synthetic detergents) and dry cleaning tests (perchloroethylene). One unit can perform preheating of the test solution and washing tests in a single operation. The test tank and preheating tank can be individually temperature controlled. ■ Pursuing safety and ease of use in every part With the air heating method, there is no concern about the contamination of wastewater with perchloroethylene, as is the case with water heating methods. Volatile components are treated by adsorption using a waste treatment device with activated carbon fibers.
Ideal for large-scale combined cycle testing of solar cells!
Among green energy, solar power generation is the most notable field, and it is desirable for solar cell modules to have a long lifespan. However, if moisture, salt, or corrosive gases penetrate the interior or frame of the solar cell modules, it can significantly affect their performance and lifespan. This time, we have developed a large-scale composite cycle testing machine that can conduct composite cycle tests combining salt spray, drying, and humidity, as well as standalone ammonia gas tests, including the solar cell module products themselves.
The Lb dust test specified by IEC 60068-2-68 is possible.
The dust test Lb specified in IEC 60068-2-68 is possible, and dust is dropped from a high position. The temperature and humidity are adjusted before the test.
Large dust testing machine using airflow type. Tests the dust resistance and dust-proof performance of products and parts.
It is an airflow-type dust testing machine that blows dust onto samples using wind from the side.
One machine, two roles! A testing machine that can conduct two different weather resistance tests simultaneously. Improved testing efficiency and space-saving.
The "S80HB-MV-2D" is a weathering test machine that has two different light sources in one unit, allowing for two tests to be conducted simultaneously. The right chamber uses a sunshine carbon arc light source for weathering tests of materials and products according to JIS, ISO, etc., while the left chamber conducts accelerated tests using a metal halide lamp with powerful energy in the ultraviolet range. It can also operate with just one chamber, contributing to flexible testing operations and space-saving in indoor environments. 【Features】 ■ Testing with two types of light sources in one device ■ Completely independent control of the two chambers; operation with just one chamber is possible ■ More than 50 cm space-saving compared to placing two test machines side by side *For more details, please contact us or download the catalog to view.
Instrumentation type pendulum testing machine capable of conducting Charpy, Izod, pipe testing, and tensile impact tests.
The Instron 9000 series impact testing machine, a pendulum-type impact tester, meets the increasing demand for high-precision and reproducible impact testing across a wide range of materials. You can choose between instrumented or non-instrumented impact testing machines tailored to your company's needs. Test types: Charpy, Izod, and Dynstat, pipe testing, tensile impact.
This is a testing machine that measures the thermal properties of plastic materials, such as the heating deflection temperature and Vicat softening temperature, with high precision.
The "HV Series" is a thermal mechanical system that can measure the thermal properties of plastic materials, such as heating deflection temperature and Vicat softening temperature, with high precision. We offer two types of oil baths: a small oil bath that can accommodate up to three test stations and a large oil bath that can support up to six test stations for testing. 【Features】 ■ Quick and easy flow ■ Integrated innovations aimed at efficient testing ■ Ensuring safety without reducing throughput ■ Space-saving design ■ Excellent results and reproducibility For more details, please refer to the catalog or feel free to contact us.
This is a testing machine suitable for testing institutions related to "quality control" and "research and development," simulating processing conditions and the flow characteristics of plastic materials.
The "CEAST SmartRHEO Series" is a comprehensive and effective testing solution for the application fields of plastics and the plastic industry. It is a laboratory extrusion device based on the "piston-die" method, consisting of a barrel, piston, capillary die that enters the barrel, pressure gauge, and load cell converter system. It is designed in accordance with international standards for rheological testing, including ISO 11443, ASTM D3835, and DIN 54811. 【Features】 ■ Measures the flow behavior of plastic materials to determine their rheological properties ■ Reproduces process conditions ■ Two independent pressure converters mounted on the barrel ■ Each bore is equipped with an independent load cell For more details, please refer to the catalog or feel free to contact us.
Instrumentation drop weight impact testing machine. It supports a wide range of tests from materials to components, including Charpy, Izod, punching, and CAI tests (compression after impact).
The 9400 series has been developed to provide faster results, fewer errors, and lower training costs for customers at the forefront of high-quality advanced materials development, particularly in laboratories focused on the development of high-strength and lightweight products. The 9400 series drop weight impact testers comply with all major impact testing standards ranging from 0.3J to 1800J. They feature a simple operating procedure, preset test conditions and guided testing, streamlined data management, output for analytical data, and compatibility with high-speed cameras. With these features, Instron's 9400 series drop weight impact testers become simpler, smarter, and safer. *For more details, please download the PDF or contact us.
The tolerance range for offset load is wide, allowing for highly accurate measurements! Reduces the possibility of damage.
The "2530 Series Static Load Cell" is an easy-to-use product thanks to its automatic recognition and automatic calibration features. It is equipped with an overload prevention function, allowing it to withstand loads up to 150% of its capacity, while also reducing the likelihood of mechanical failure under loads of up to 300%. While maintaining complete accuracy, it can offset the weight of grips or fixtures up to 10% of the load capacity for zero setting. 【Features】 ■ Load capacity: ±500N to ±100kN (50 to 10,000kgf) ■ Suitable for a wide range of test types: including tension, compression, repeated, single swing, and double swing repeated stress ■ Automatic recognition and calibration functions using an electronic serial number enable easy and error-free operation *For more details, please refer to the PDF document or feel free to contact us.
Designed based on the AVE2 high-performance video extensometer! Cutting-edge innovation that provides top-class lateral strain accuracy.
Conventional lateral strain gauges measure the r-value using one or two points of lateral strain, and due to localized strain in the specimen, vibrations of the gauge, or differences among operators, the measured r-value can vary by up to 30%. In this method, it is necessary to conduct retesting to verify whether this r-value meets the performance requirements of the client, which can lead to wasted time. 'AverEdge32' is an advanced optional feature that utilizes the onboard processing capability of AVE2 to capture the values of 32 individual lateral strains within the gauge length of the specimen, averaging them in real-time into a single digital signal. [Features] - Improves reproducibility of test results, reducing or eliminating the need for retesting - Lateral marks are unnecessary due to edge detection functionality - Capable of conducting tests that exceed the requirements of ISO10113, ASTM E517, JIS 2253, and GB/T 5027 regarding plastic strain ratio (r-value) - Compatible with various existing AVE2 units currently in use or purchased additionally *For more details, please refer to the PDF materials or feel free to contact us.
