Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
2161～2190 item / All 3619 items
Apply high voltage after turning off the IGBT.
A partial discharge and corona discharge testing device that can detect partial discharges and corona discharges without being affected by switching elements.
Apply to the primary side of the measuring step-up transformer and monitor the output on the secondary side to detect partial discharge and corona discharge.
This is an introduction to the partial discharge and corona discharge testing equipment handled by Adfox Corporation.
◆Equipped with Windows 10. PC-like operability. ◆Centralized management of measurement data is possible with EXFO Connect.
◆ Equipped with USB, WiFi, and Bluetooth interfaces, supports mobile and VPN ◆ Supports 1-100G transport & datacom testing, optical spectrum analysis (OSA), and OTDR loss testing ◆ Available in single carrier and dual carrier options Single (210mm x 254mm x 66mm, 2.0kg) Dual (210mm x 254mm x 96mm, 2.4kg) The FTB-1v2 and FTB-1Pro are portable, carry-style optical platforms that combine convenience for transport with multifunctionality. They are the most compact units in EXFO's modular platform lineup. They support various optical tests such as OSA (optical spectrum analysis), OTDR, OLTS (loss testing), and 1G to 100G Ethernet transport testing.
◆Supports 1 to 400G transport & datacom testing, optical spectrum analyzers (OSA), OTDR, loss testing, chromatic dispersion (CD), polarization mode dispersion measurement, etc.
◆Multi-functional and portable size (199 mm × 333 mm × 119 mm/3.0kg) ◆Supports 1–400G transport & datacom testing, optical spectrum analysis (OSA), OTDR, loss testing, chromatic dispersion (CD), polarization mode dispersion measurement, etc. The FTB-2 and FTB-2 Pro are portable optical platforms that combine convenience for transport with multi-functionality. We offer the FTB-2, which supports various optical tests such as OSA, OTDR, and CD/PMD measurements, as well as the FTB-2-PRO, which supports the above along with 1G–100G Ethernet transport testing. The robust platform, equipped with a 10.1-inch outdoor-enhanced touchscreen, ensures excellent operability and guarantees the best performance. Size: 199 mm × 333 mm × 119 mm/3.0kg
◆Supports PAM-4/NRZ high-speed modulation methods ◆Compatible with 100G to 400G BER testing ◆Equipped with FEC (Forward Error Correction) simulation function
◆Integrated Module Compliance Board (MCB) ◆ No RF cable required - The integrated MCB board offers superior cost performance as a PAM4/NRZ compatible device. - Direct connection possible with QSFP-DD, QSFP, QFSP28, SFP-DD, and SFP28. - Real-time virtual support available through the Taiwan support center. This is a BER testing device with an 8-channel x 10-28GBd PAM4/NRZ, equipped with FEC simulation functionality for burst error analysis compatible with 400G. The MA-4000 features an integrated Module Compliance Board (MCB) design, eliminating the need for RF cables. We offer more flexible and cost-effective solutions for 100-400G BER testing.
◆Supports PAM-4/NRZ high-speed modulation methods ◆Compatible with BER testing for 800G/400G/200G/100G optical transceivers
◆ Equipped with FEC (Forward Error Correction) simulation function ◆ Fast connection to MCB via 1×8 O-SMPM ◆ Supports PRBS 7/9/11/13/15/23/31/13Q/31Q, SSPRQ - Excellent cost performance as a PAM4 and NRZ compatible device - Real-time virtual support available through the Taiwan support center The BA-4000 is a BER testing device equipped with burst error analysis FEC (Forward Error Correction) simulation function, compatible with NRZ and PAM4 high-speed modulation schemes. It enables simple and speedy BER testing of the latest optical transceivers. Since its founding in 1985, EXFO has continued to lead the industry with highly unique product development and reliable quality, establishing itself as a leading company in optical communication measurement instruments. It holds the number one market share in the optical product sector worldwide. In recent years, it has expanded its lineup of high-performance measurement instruments for laboratories while also rapidly advancing the automation of measurement devices. With a simple and highly convenient interface, it has gained support across a wide range of scenarios from laboratory use to manufacturing sites.
◆Supports 1Gbps to 4x100Gbps Ethernet and transport testing in a compact 1U rack◆Dual-port Ethernet testing
◆Various Ethernet tests compliant with RFC2544/EtherSAM ITU-T Y.1564 and RFC6349 ◆IPv6, MPLS tests ◆Remote access available via third-party tools Convenient 19-inch rack-mounted platform Supports various modules for Ethernet & transport testing, MEMS optical switches *Please refer to the list for the measurement functions of supported modules.
◆0.1 to 4 Gbps, SFP Bit Error Rate (BER) Tester ◆Pocket-sized ◆USB-PC connection
Liverage's 10G/25G SFP checker is a palm-sized BER tester. It can quickly perform bit error rate (BER) testing for 0.1 to 4 Gbps, AOC, and SFP. It comes with a DDM display function.
Anyone can easily start the test! The three essential elements of "water, light, and heat" are reproduced inside the testing machine.
The "Q-SUN Xe-1" is a tabletop xenon accelerated weathering test chamber that utilizes xenon arc technology to replicate the three main factors—water, light, and heat—that lead to "weather resistance" degradation. It allows for various accelerated tests and can operate in low-temperature environments. To accommodate a wide range of simulation applications, it comes with a variety of optical filter accessories for indoor (window glass), outdoor (daylight), and strong ultraviolet specifications, and it is capable of functioning in low-temperature environments. 【Features】 - Japanese language touch panel control - High-power test chamber with a set illuminance of 125W/m² - Running costs are low due to the long lifespan of the xenon lamp - Various simulations can be reproduced using different optical filters - Ample sample placement area despite a compact body - Low initial cost *For more details, please refer to the related links or feel free to contact us.
Easily understand the exam status and progress at a glance! Supports 17 languages and features dual displays.
The "Q-FOG SSP" is a salt spray test machine that can perform three types of cycle tests: salt spray, drying, and darkness, and is widely adopted around the world. It is used to test the corrosion resistance of metal materials and products or parts with coated surfaces. Additionally, a large number of test specimens can be loaded and tested all at once with this single machine. 【Features】 ■ Japanese language touch panel control ■ Complies with ASTM B117 testing standards ■ Suitable for cycle testing with QUV ultraviolet irradiation ■ Large volume chamber design, capable of accommodating 240 test panels ■ Can test molded products without cutting, with a load capacity of 544 kg *For more details, please refer to the related links or feel free to contact us.
We will test operators wearing ESD gloves or finger cots in accordance with the compliance verification required by ESD TR53.
The "Switch Unit for Glove Attachment" is a testing device for ESD gloves and finger cots. Thanks to the stainless steel electrodes, a wider testing surface can be achieved, allowing for the measurement of the grounding path of operators wearing gloves or finger cots. When the operator grips the electrode and touches the touch switch of the operator tester, the ESD glove testing device is activated. 【Features】 ■ Used in conjunction with Smart Log V5 and Combo Tester X3 ■ Wider testing surface due to stainless steel electrodes ■ Capable of measuring the grounding path of operators wearing gloves or finger cots ■ Made in the USA *For more details, please refer to the related link page or feel free to contact us.
Protection Relay Tester IP-R Series
This is a performance testing device for various protective relays (relays) used in high-voltage receiving equipment. The relays subject to testing include: 1. Overcurrent relay (OCR), 2. High-voltage ground relay (GCR), 3. Directional ground relay (DGR), and 4. Over/under voltage relay. It is a best-selling multi-type relay tester equipped with additional testing functions, including dielectric strength testing. The structure is portable and excels in mobility, with test output cables distinguished by color coding, and connectors are used for the connection method, enhancing operability for tasks such as wiring.
Carefully respond to insulation resistance tests for large-capacity power cables and equipment.
A voltage withstand tester with a rich lineup prepared according to various applications.
Capable of accommodating all measurement conditions regardless of the type, length, or thickness of the power cable.
A voltage withstand tester that demonstrates its effectiveness in voltage withstand tests and insulation performance diagnostic tests for large capacitance equipment.
The relay test of the solar power generation system is made possible with this one unit.
Three-phase voltage output capable voltage and frequency relay tester
Ideal for on-site calibration of relay testers!
This is an introduction to the multi-measurement and testing equipment for digital calibration handled by Musashi Intec Co.
KYORITSU: Easily diagnose the safety of electric tools and electrical equipment at 100/200V!
The electrical equipment periodic inspection tester, "KEW 6206," can automatically perform various tests on electric tools and electrical devices simply by pressing the test button, without any connection changes, and provide diagnostics. It is capable of measuring leakage current during actual operation, ensuring accurate diagnosis of equipment leakage that cannot be detected by insulation resistance measurement alone. Additionally, by connecting to a label printer, it allows for the creation of labels for diagnostic results on-site, making the management of periodic inspections easier. 【Features】 - Automatically performs various tests and diagnostics with just a press of the test button - Capable of measuring leakage current during actual operation - Accurately diagnoses equipment leakage that cannot be detected by insulation resistance measurement alone - Saves up to 999 diagnostic results - Allows for data management via PC with USB connection (An optional USB cable is required for connection to a PC) *For more details, please refer to the PDF materials or feel free to contact us.
Operational efficiency and measurement speed have greatly improved! Supports the investigation of various power supply issues through power quality measurement.
The "KEW 6315WHM" is a testing device that allows for easy and reliable verification of connections after the installation or replacement wiring work of electric meters, strongly supporting the improvement of construction quality. It automatically determines the quality based on the magnitude, balance, and phase of the voltage, as well as the magnitude and phase of the current. The judgment results are displayed as "OK" or "NG," making it easy to understand at a glance. Additionally, it comes standard with an adapter that can supply power from the measurement line (100–240V), and it supports wiring methods for single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire type electric meters. 【Features】 ■ Easy and reliable connection verification, strongly supporting the improvement of construction quality ■ Judgment results are displayed as "OK" or "NG" for easy understanding (no need for analysis from measurement values or phase angles) ■ Automatically determines quality based on the magnitude, balance, and phase of the voltage, as well as the magnitude and phase of the current ■ Significantly improved operability and measurement speed ■ Standard equipped with an adapter that can supply power from the measurement line (100–240V) *For more details, please refer to the PDF document or feel free to contact us.
Quantifying various textures and sensations! Evaluating the sensory and strength properties of food, cosmetics, tablets, and industrial products.
Supports various standards such as JIS, ASTM, and pharmacopoeias. With a rich combination of over 200 types of fixtures and measurement programs, it caters to a wide range of applications from quantifying texture and sensory attributes to tests for adhesion, fluidity, and strength. High-precision measurements can be made with a resolution of 0.1g and 1μm. Data acquisition linked with video systems and acoustic systems is also possible, as well as fluidity testing of powders using a powder flow analyzer. A temperature chamber is also available.
Fully Automatic Micro/Vickers Hardness Testing System
High-Intelligent System with High-Speed Material Shape Recognition Function ■□■Features■□■ ■ High speed, high precision, high stability, high operability, and improved reading capability ■ A reliable testing partner that is closer to the human eye and brain ■ By simply selecting the measurement pattern, a complete automatic series of measurements and recordings can be performed from continuous point hitting ■ Diverse measurement patterns ■ Standard equipment for random measurements combined with material shape recognition function and continuous contour measurements along the material's outer edge ■ Capable of accommodating most requests such as straight line, zigzag, arc, irregular shape, line set, random, matrix, and teaching measurements ■ For other functions and details, please download the catalog or contact us.
Case studies of hardness tests to ensure the quality of critical components related to passenger car safety.
The "Hardness Testing Examples" introduces essential cases of hardness testing that are crucial for ensuring the quality of important components related to safety, such as engine components of passenger cars and other body, electrical, and electronic components. We conduct tests on approximately 30,000 items in total, including about 7,000 engine components, around 10,000 drive, transmission, and control components, and approximately 13,000 other body, electrical, and electronic components. [Test Content] ■ Engine components: surface hardness, internal hardness, hardened layer depth, material hardness ■ Drive, transmission, and control components: surface hardness, internal hardness, hardened layer depth ■ Other body, electrical, and electronic components: surface hardness, internal hardness, hardened layer depth *For more details, please refer to the PDF document or feel free to contact us.
Introduction of the "environmental testing device" that changes the atmosphere of the test subject from -40℃ to 120℃ and the "constant temperature room" that observes the surrounding temperature changes of the compressor.
At Matsuzawa Manufacturing, we produce environmental testing equipment tailored to your specifications. ■ Environmental Testing Equipment Example) A device that alternately circulates special fluids in a closed circuit to test the temperature changes of test specimens. Example) A device that controls the refrigerant temperature using electric cooling. ■ Constant Temperature Chamber A device to observe temperature changes around the compressor. We offer custom designs tailored to researchers testing the performance and characteristics of materials and components, accommodating various requests. 〈Examples of Requests〉 - In addition to controlling indoor temperature and humidity, I want to freely create penetration holes for sensors and piping. - We can also design and manufacture fixtures and support brackets inside the constant temperature tank. - I want to transmit power into the tank by allowing the motor shaft to penetrate the tank or by installing air piping. - Since water accumulates in the tank, I would like to provide a drainage hole. If you are facing conditions that cannot be accommodated by general testing machines, please consult us. *For more details, please contact us through our website.
Capable of measuring torsional strength up to 2 kN-cm.
Compact-sized tabletop torque tester
To those using the SV-5A model: We have renewed and are now manufacturing and selling the tensile and compression testing machine 'SV-55CB'.
The vertical stand "SV-5A type," which can be operated both electrically and manually with a clutch switch, has been renewed and is now manufactured and sold as "SV-55CB" with a maximum load of 500N. We sincerely apologize for the inconvenience, but we kindly ask you to consider the tensile and compression testing machine "SV-55CB" when updating your equipment. [Introduction of some changes] ■ Low cost ⇒ More affordable than the combination of a digital force gauge and a dedicated stand! ■ Software compatibility ⇒ Usable with functions similar to those of the tensile and compression testing machine! ■ Range compatibility ⇒ <~300N>, <~500N> *For more details, please download the PDF or feel free to contact us.
We would like to introduce some of the special and custom jigs that we have manufactured to meet various demands.
In the tensile and compression testing machine with special fixtures, we introduce some of the special and custom-made fixtures that have been manufactured to meet various requirements. In tensile testing, there are "air chucks, special film chucks, optical fiber tensile fixtures, tape tensile fixtures, lead-free solder testing tensile fixtures, and die-cast product tensile strength fixtures." In compression testing, there are "special compression fixtures, compression fixtures with buffer springs, and compression fixtures with displacement gauges." For bending tests, we have "tile bending fixtures, substrate bending fixtures, four-point bending fixtures, clamp-type bending fixtures, and large special bending fixtures." In peel testing, there are "coating peel fixtures, 90-degree peel fixtures, T-shaped peel fixtures, toner container peel fixtures, and 90-degree special peel fixtures." For other tests, we offer "friction force measurement devices, manual rollers, 45-degree inclined platforms, hot plates, and torsion spring measurement fixtures," among many others. For more details, please contact us or refer to our catalog.
We manufacture various evaluation testing machines tailored to your specifications.
In addition to tensile and compression testing machines, we manufacture various evaluation testing machines tailored to your specifications. We produce a range of specialized and custom machines, including torque testing machines, automatic tensile testing machines, high-speed peeling testing machines, switch durability evaluation testing machines, tape rewind testing machines, elongation measurement devices, automatic wire tensile testing machines, X-Y-Z load testing machines, testing machines with microscopes, and compact testing machines, among others, to meet the unique standards of our users. For more details, please contact us or refer to our catalog.
We offer three types of stroke specifications! A relatively large stroke tensile compression testing machine.
The "SDT-204F" is an electric tensile and compression testing machine with a maximum load of 2kN. It has three types of stroke specifications and can be used for tensile tests of highly stretchable samples like rubber, as well as tests that require large strokes, such as peeling. It features a touch panel control panel and offers options such as the standard gauge extension meter "GTD-1000" for tests involving significant elongation of materials like rubber, as well as "analog external output." 【Specifications (partial)】 ■ Maximum load: 2kN ■ Load accuracy: JIS Class 1 testing machine (within ±1% of the measured indication) ■ Minimum displacement unit: 0.01mm ■ Drive method: Brushless motor ■ Speed range: 5 to 500mm/min *For more details, please refer to the PDF document or feel free to contact us.
For various load tests of medium to high loads! A tensile and compression testing machine with a gate-type frame, ranging from 2kN to 200kN.
The "SDW-F" is a tensile and compression testing machine that applies loads to samples by vertically moving the crosshead with left and right feed screws of a gantry frame, with a maximum load capacity ranging from 2 kN to 200 kN. We offer both floor-mounted and tabletop models. Additionally, we can accommodate custom specifications such as desk types, wider effective testing widths, and models with constant temperature chambers. Due to its gantry frame structure, it can conduct tests on relatively large workpieces, and by adding ranges, it can also handle tests with smaller loads. 【Features】 - Equipped with a touch panel control unit - Available in both floor-mounted and tabletop models - Capable of testing relatively large workpieces due to its gantry frame structure - Can accommodate tests with smaller loads by adding ranges *For more details, please refer to the PDF document or feel free to contact us.
Testing with samples and methods suitable for horizontal orientation! Horizontal tabletop testing machine with a maximum load of 500N.
The "SH-14F" is a compact tabletop horizontal tensile and compression testing machine. It has a maximum load capacity of up to 500N and is chosen for samples that can only be tested in the horizontal direction or when it is preferable to work horizontally. It features a touch panel control system and can be used for various tests, including semiconductor IC peeling tests and friction force tests. 【Specifications (partial)】 ■ Maximum load: 500N ■ Load accuracy: JIS Class 1 testing machine (within ±1% of the measured indication) ■ Minimum displacement unit: 0.01mm ■ Drive method: Brushless motor ■ Speed range: 5 to 500mm/min *For more details, please refer to the PDF document or feel free to contact us.
