Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
211～240 item / All 3531 items
This is an introduction to a two-axis chain system testing device.
【Overview】 ■ The engine timing chain is driven by a motor, and a dynamometer is used as a load device to replicate the engine operating condition. ■ The lubricant can be temperature-controlled up to 120°C.
Equipped with isothermal heating continuous test and isothermal heating intermittent test modes! The main unit has a drip-proof structure, making it safe for outdoor use.
This product is a thermal response testing machine that adopts an easy-to-operate touch panel system. Necessary measuring instruments, such as the media flow sensor and media inlet/outlet temperature sensors, are built into the main unit. The control box and main unit can be connected with a one-touch dedicated wiring. The heating heater can be set to three levels: 1.34kW, 2.67kW, and 5.0kW. Additionally, it is equipped with protective devices to prevent overheating of the circulating media and dry heating of the heater. 【Features】 ■ Adopts an easy-to-operate touch panel system ■ The control box and main unit can be connected with a one-touch dedicated wiring ■ The heating heater can be set to three levels: 1.34kW, 2.67kW, and 5.0kW ■ Safety feature that stops the device when the media flow is below 5L/min ■ The main unit has a drip-proof structure, making it safe for outdoor use *For more details, please refer to the PDF materials or feel free to contact us.
Reproducing the voltage fluctuation phenomenon of commercial power supply!
It can be used for performance evaluation of electronic and electrical devices affected by power voltage fluctuations, which may cause malfunctions or reduced functionality. This testing device simulates voltage fluctuations and instantaneous power outages of commercial power sources (AC100/200V) to evaluate the resilience of electronic devices. It is tested across various industries not only to meet the requirements of the international standard IEC61000-4-11 but also for resilience evaluation against voltage fluctuations and momentary interruptions. ○ It is a testing device compliant with IEC 61000-4-11 Ed.2 standards. ○ The multi-socket allows for direct connection of the EUT's AC adapter. ○ Test parameters specified by the standards can be easily set via the front panel. (Voltage fluctuation tests are conducted using software.) ○ User-defined tests that are not bound by standards can be performed through control using PC software. ○ DC instantaneous interruption tests can also be conducted. (DC125V, 16A max) *For details, please refer to the catalog or contact our company.
Generate transient surges as required by the international standard ISO 7637-2 (2011 edition) and evaluate the resistance of the onboard electronic equipment.
This is a testing device that simulates various transient surge phenomenon noises in vehicles as required by the international standard ISO 7637-2 (2011 edition) to evaluate the resistance of onboard electronic equipment. - Complies with ISO 7637-2 (2011 edition) standards* - Compatible with vehicle testing for 12V/24V/42V systems. - Each pulse waveform is housed in individual enclosures, allowing for standalone use. - Equipped with a high-capacity CDN (60V/50A). - Can supply power to devices under test (DUT) up to 200A (optional). - Programmable testing is available with Japanese-compatible Windows software (optional). - Other individual manufacturer specifications can also be accommodated (please inquire separately). *Some features may not be supported. Please contact us for details.
Resistance of onboard electronic equipment based on "JASO D 001-94".
This is a testing device that simulates various transient surge phenomena in vehicles based on the environmental testing method guidelines for automotive electronic devices "JASO D 001-94" established by the Society of Automotive Engineers of Japan, and evaluates the resistance of onboard electronic devices. - Testing in accordance with the JASO D001-94 standard (issued by the Society of Automotive Engineers of Japan) - Compatible with 12V/24V vehicle testing. - Output surge waveforms can be selected with a single touch. *For more details, please refer to the catalog or contact our company.
Demo units available! Even compact, equipped with new features to make EMC testing easier.
This is a test device that simulates the rapid rise of high-frequency noise caused by discharges between contacts of switching devices and arc discharges generated from electronic motors, allowing for the evaluation of electronic equipment's resistance. - Complies with IEC 61000-4-4 Ed.3 standards. - Equipped with a pre-check function, making pre-operation inspections easier. - The size has been made more compact compared to conventional models (approximately 67% in volume). - Clear panel display reduces connection errors with the power cable. - With a maximum output voltage of 5kV and a maximum pulse frequency of 2MHz, it can assess levels above standard testing. - The CDN capacity has been increased to single-phase AC240V20A and single/three-phase AC600V63A, accommodating a wider range of EUT power capacities. - A large-capacity CDN (100A or 150A) allows for superimposed testing on various EUTs (optional). - By using coupling clamps and EMS probe kits, testing on signal lines and noise resistance evaluation on circuit boards can be performed. *For more details, please refer to the catalog or contact our company.
Demo units available! For solving market trouble issues.
This is a testing device that simulates the generation of fast rise-time high-frequency noise caused by discharges between contacts of switching devices and arc discharges from electronic motors, in order to evaluate the resistance of electronic equipment. - The pulse width and other settings can be adjusted with just button operations, reducing the time needed for test condition setup. - It reduces the number of consumables, leading to cost savings. - The use of a short plug allows for easy switching between common and normal modes. - The TEST TIME setting enables the configuration of test duration. - Testing at a higher pulse repetition frequency has become possible. (Only for INS-S220) - The outlet panel allows for direct connection of the EUT's AC plug. (Optional) - Various tests can be conducted using different probes, coupling adapters, etc. (Optional) - By adding an external coupling device (CDN), testing of EUT power capacity in three phases is also possible. (Optional) - By using dedicated software, tests can be conducted under various test conditions. (Optional, only for INS-S420) *For more details, please refer to the catalog or contact us.
Simulate the rapid high-frequency noise generated by switches and other open/close devices during ON/OFF operation to evaluate the resistance of electronic and electrical equipment.
This product is a damping vibration wave tester compliant with the IEEE C37.90.1-2012 standard. - It can conduct tests in accordance with the IEC 61000-4-18 (2006) standard. - It can conduct tests in accordance with the power standard B-402 (2007). - It can conduct tests in accordance with the IEEE C37.90-2012 standard. - It outputs a maximum voltage of 3kV, allowing for ample testing. - The use of a touch panel provides an easily visible setting screen. - The tester allows for switching between common mode/normal mode and changing the applied phase internally. - By using a coupling balun, normal mode tests compliant with the IEEE C37.90-2012 standard can also be conducted. - It has a built-in power line CDN (AC240V/DC125V 20A). *For more details, please refer to the catalog or contact our company.
High power DC 450V 125A compatible! Many stacked units and lightning surge testers available!
This catalog features EMC test equipment for high-power devices compatible with DC450V and 125A. We introduce various products, including the "Coupling Unit," which allows for noise superimposition testing when combined with the fast transient/burst tester, and the "Lightning Surge Tester," which enables constant switching of decoupling circuit parameters. 【Featured Products】 ■ Coupling Unit (AC500V 150A / DC500V 150A) ■ Coupling Unit (AC600V 300A) ■ DC Power Coupling Dedicated CDN (DC500V 60A) ■ Coupling Unit (AC600V 300A) ■ Lightning Surge Tester (AC500V/100A) ■ Lightning Surge Tester (CHAdeMO compatible AC500V/100A DC600V/100A) *For more details, please refer to the PDF document or feel free to contact us.
![[Information] Overview of JEC Standards](https://image.mono.ipros.com/public/product/image/abe/2000437883/IPROS8156354635580384600.jpg?w=280&h=280)
Detailed explanation of test procedures, block diagrams, waveforms, etc. regarding JEC standards!
This document provides information about JEC standards. It specifies the insulation resistance testing for equipment connected to power systems, with the aim of protecting electrical facilities, and defines the test voltage and target circuits. It includes detailed explanations of examples of connection to power lines, testing procedures, block diagrams, and waveforms. [Contents] ■ Standards ■ Testing Procedures ■ Block Diagrams and Waveforms *For more details, please refer to the PDF document or feel free to contact us.
![[Information] Overview of IEC 61000-4-2 Ed.2 Standard](https://image.mono.ipros.com/public/product/image/886/2000437887/IPROS15395393658755914735.jpg?w=280&h=280)
A detailed explanation of the IEC 61000-4-2 Ed.2 testing standard with illustrations!
This document provides information on the testing standards of IEC 61000-4-2 Ed.2. It is a standard applicable for evaluating the immunity of electronic devices against electrostatic discharge generated directly from operators or nearby objects under conditions where synthetic fiber carpets and clothing are used in low relative humidity environments. It includes detailed explanations on test levels, verification of test generators and waveforms, and more. 【Contents】 ■ General Information ■ Test Levels ■ Verification of Test Generators and Waveforms ■ Test Setup ■ Test Procedures ■ Test Results and Test Reports *For more details, please refer to the PDF document or feel free to contact us.
![[Information] Overview of IEC 61000-4-11 Ed.2 Standard](https://image.mono.ipros.com/public/product/image/bb1/2000437902/IPROS18188417387211001799.jpg?w=280&h=280)
Test procedures, etc.! A detailed explanation of the IEC 61000-4-11 Ed.2 test standard.
This document provides information about the IEC 61000-4-11 Ed.2 testing standard. It is an immunity evaluation standard to assess whether electrical and electronic equipment connected to low-voltage power supply networks will malfunction due to power outages, voltage fluctuations, etc. It includes an overview, testing levels, characteristics and performance of test generators, and more detailed explanations. [Contents] ■ General Information ■ Testing Levels ■ Characteristics and Performance of Test Generators ■ Test Setup ■ Test Procedures ■ Test Results and Reporting *For more details, please refer to the PDF document or feel free to contact us.
![[Information] ISO 7637-2 Ed.3 2011 Standard Overview](https://image.mono.ipros.com/public/product/image/297/2000437922/IPROS1870640054367134380.jpg?w=280&h=280)
A detailed explanation of the test overview of ISO 7637-2 Ed.3 2011.
This document provides an overview of the testing outlined in ISO 7637-2 Ed.3 2011. This standard specifies the evaluation (immunity) and measurement (emission) of the resistance of electronic and electrical equipment installed in 12V or 24V vehicles to conductive electrical transients. It offers detailed explanations on test levels, specifications of the generator, verification of output waveforms, test setup, and testing procedures. [Contents] ■ General Information ■ Test Levels ■ Specifications of the Generator and Verification of Output Waveforms ■ Test Setup and Testing Procedures *For more details, please refer to the PDF document or feel free to contact us.
![[Information] Overview of IEC 61000-4-2 Ed.2 Standard](https://image.mono.ipros.com/public/product/image/fcb/2000437944/IPROS12578436102130041166.jpg?w=280&h=280)
Publication of the test overview for IEC 61000-4-2 Ed.2 for automotive and in-vehicle equipment.
This document provides an overview of the IEC 61000-4-2 Ed.2 testing guidelines for automotive and in-vehicle equipment. This standard applies to the immunity evaluation of electronic devices against electrostatic discharges generated directly from operators or nearby objects under conditions where chemical fiber carpets and clothing are used in low relative humidity environments. It includes detailed explanations of the overview, test levels, specifications of the generator, and verification of output waveforms. [Contents] ■ General Information ■ Test Levels ■ Specifications of the Generator and Verification of Output Waveforms ■ Setup of the Test Equipment ■ Test Procedures ■ Test Results and Test Reports *For more details, please refer to the PDF document or feel free to contact us.
![[Information] ISO 16750-2 Ed.4 2012 Standard Overview](https://image.mono.ipros.com/public/product/image/657/2000437959/IPROS18326329625959080150.jpg?w=280&h=280)
Detailed explanation of the test objectives, methods, etc.! Overview of the ISO 16750-2 Ed.4 2012 test.
This document provides an overview of the testing outlined in ISO 16750-2 Ed.4 2012. This standard describes the voltage fluctuation immunity of electrical loads for vehicle-mounted equipment (excluding EMC). It offers a detailed explanation of the overview, testing objectives, methods, and required levels. [Contents (Excerpt)] ■ General Information ■ Testing Objectives, Methods, and Required Levels - DC Power Supply Voltage - Overvoltage - Superimposed AC Voltage *For more details, please refer to the PDF document or feel free to contact us.
For performance evaluation of electronic devices affected by intrusion from power lines and induced noise from communication lines!
The impulse noise tester simulates fast-rising high-frequency noise caused by discharges between the contacts of switching devices and arc discharges from electronic motors, allowing for the evaluation of electronic equipment's resistance to such noise. The impulse noise tester INS-S100 can output pulses starting from 50V, making it easy to evaluate the noise resistance of circuit boards and low-voltage components during product development, as well as to analyze issues that arise in the market. - The ability to output pulse voltages starting from 50V allows for easy evaluation of noise resistance on circuit boards and similar components. - The ability to change the output voltage during pulse output makes it easier to assess noise resistance. - The TEST TIME setting allows for the configuration of test duration. - It is lightweight and compact as it does not include a coupling decoupling network (CDN). - By using a coupling adapter, noise resistance evaluation against signal lines can be conducted (optional). - By using a radiation probe, noise resistance evaluation against circuit boards and similar components can be conducted (optional). *For more details, please refer to the catalog or contact us.*
For the safety and security of a mobility society.
The technological innovations referred to as "CASE" (Connected, Autonomous/Automated, Shared, Electric) are diversifying at an unprecedented pace in automotive development. As the electrification of vehicles progresses, the importance of confirming the EMC resistance of electronic devices within vehicles, due to issues such as mutual interference, is increasing. The ISS-7800 Series is a testing device that outputs transient surges as required by the international standard ISO 7637, used to verify the noise immunity resistance of automotive electronic devices. The ISS-7800 Series is a testing system that incorporates pulse units mounted in a rack. It offers excellent scalability, allowing for the addition of pulse 5a/5b and Slow pulse +/− as needed. Furthermore, by controlling the entire system with software using a PC, it enables sequence testing and report generation.
The lightness of this with hand operation!
An overwhelmingly user-friendly discharge gun. Please compare it with guns that have lightness, weight balance, and assurance and safety for testing. - The discharge gun equipped with a touch panel has made settings "easier." (Improved operability) - It can also be battery-operated, allowing for "easy" transportation to various locations for testing. (Improved portability) - The pre-check function allows for "easy" daily inspections. *For product demonstrations or inquiries, please feel free to contact us.
This device is classified into a characteristic measurement device and a durability testing device based on its purpose.
The durability testing device applies repeated loads to test the durability of the starter.
We propose the optimal performance testing equipment tailored to your needs!
Our company's "Durability and Performance Testing Equipment" responds to the diverse needs of our customers with optimal methods and technologies. Enhancing the quality and reliability of products and components is one of the most important challenges for companies. In particular, automotive parts are related to human lives, and a recall can lead to significant damage. We possess proprietary technology backed by extensive achievements, ensuring not only the reliability of our performance testing equipment but also industry-leading testing accuracy. 【Features】 - A wide range of performance testing equipment introduced mainly for automotive-related companies - Contributes to speeding up production and development - Proprietary technology backed by extensive achievements - A rich lineup of products - Technology based on Japanese Industrial Standards (JIS) *For more details, please refer to the PDF document or feel free to contact us.
We can make proposals based on corrosion testing and many years of experience within the Toray Group.
In "Material Evaluation," it is possible to conduct immersion tests and evaluations of the corrosiveness of various materials against chemical solutions in the laboratory. In addition to the results of the immersion tests, we can propose optimal countermeasures based on over 40 years of experience within the Toray Group and expertise in metals. 【Examples of Evaluation Equipment】 ■ Corrosion testing apparatus, autoclaves for high-pressure and high-temperature testing, various evaluation equipment
We accept various types of mechanical strength tests.
We realize various testing environments in the fields of transportation and packaging tests, as well as automotive and aerospace equipment. Depending on the test specimen, we can create dedicated fixtures in-house and conduct the tests.
For automotive parts, electronic components, and aircraft parts (railway vehicle parts)! We have a variety of equipment, including constant temperature and humidity chambers.
We offer "Combined Vibration Testing Services." We can conduct tests to evaluate resistance to environmental stress from temperature, humidity, and vibrations experienced during product transportation and usage. We have an IMV model "A22/EM2HAM" with a maximum load capacity of 300kg. Please feel free to contact us for more information. 【Equipment Details】 <IMV model A22/EM2HAM> ■ Vibration Method: 1-axis vertical ■ Maximum Vibration Force: Sine 22kN, Random 22kNrms, Shock 44kN ■ Maximum Acceleration: Sine 1000m/s², Random 630m/s²rms, Shock 2,000m/s² ■ Maximum Velocity: 2.0m/sec ■ Maximum Displacement: 51mmp-p ■ Maximum Load Capacity: 300kg *For more details, please refer to the PDF document or feel free to contact us.
Improvement of operability through interactive graphic panels. Up and down opening doors designed with work efficiency in mind.
The environmental testing machine for oscillating, sliding, and rotating high and low temperature durability testing is a multifunctional testing machine that can conduct durability tests while performing oscillation, sliding, and rotation. All conditions can be automatically set via an interactive graphic panel, and the visibility of the workpiece has been improved with an up-and-down opening door operated by an air cylinder, taking work efficiency into consideration. 【Features】 ○ Improved operability with an interactive graphic panel ○ Up-and-down opening door designed for work efficiency ○ Easy visual inspection of the workpiece through a ceiling observation window For more details, please contact us or refer to the catalog.
By controlling two cooking appliances from a computer, we measure cooking power, warming power, etc., and save the measurement data to the computer's HDD.
Cosmotech proposes a high-precision and efficient testing system using a PC and dedicated buffer. 【Configuration】 ○ PC: Windows 2000 ○ I/O board ○ GPIB board ○ Power meter ○ Stabilized power supply ● For more details, please download the catalog or contact us.
We will make the xenon tube emit light according to the specified emission pattern and conduct tests until its lifespan.
Cosmotech proposes a high-precision and efficient testing system using a PC and dedicated buffer. 【Configuration】 ○PC: Windows 2000 ○A/D Converter: 12-bit 8 channels ○Parallel I/O: 4 Ports ○LCD: 15-inch monitor ○Uninterruptible Power Supply (UPS) ●For more details, please download the catalog or contact us.
Significantly reduces vibration and noise! Vibration-damping material that resolves complaints and requires no hassle.
The "JS/JSH Series" is the optimal spring vibration isolation material for environments where silence is required. It significantly reduces vibrations that could not be solved by conventional rubber vibration isolators alone, making it possible to eliminate vibration complaints after installation. 【Features】 ■ Compact design ■ Significant reduction of vibration and noise ■ Elimination of vibration complaints *For more details, please refer to the PDF materials or feel free to contact us.
4D dynamic imaging small universal testing machine Dynamazing, visualizing stress changes in low-density materials/products using imaging devices (such as X-ray CT).
The compact universal testing machine for 4D dynamic imaging, Dynamazing, visualizes stress changes in low-density materials/products using imaging devices (such as X-ray CT). It opens the way to unexplored fields in a wide range of areas, including industrial materials, non-woven fabrics, fuel cell materials, food, resins, and plastics, significantly contributing to research advancement. When combined with ExFact VR, the possibilities expand even further with 3D visualization, analysis, distribution, and viewing. **Features of the Compact Universal Testing Machine for 4D Dynamic Imaging:** (1) A compact universal testing machine compatible with imaging devices (such as X-ray CT) for compression, tension, three-point bending, and bending tests. (2) In-situ visualization of stress changes in low-density materials/products using imaging devices (such as X-ray CT). (3) Usable in a wide range of fields including industrial materials, non-woven fabrics, fuel cell materials, food, resins, and plastics. (4) Interchangeable sample tubes to accommodate various samples. (5) Battery-operated and remotely controlled via wireless operation, eliminating the need for device modification or power supply. (6) 4D display (3D + time) with ExFact VR time series.
The installation space is 1m x 1m, no foundation work required, and it accommodates tests from product durability testing to transportation simulations with its unique three-axis simultaneous vibration.
* Simultaneous three-axis vibration identical to transport environment * No need for foundation work, suitable for any location * Excellent durability with maintenance-free design * Low noise level below 75dB * Supports payloads up to 50kg Reproduces issues such as scuffing and fading of product packaging during transport, damage, loosening of screws, and poor contact. It can also be utilized in product design and packaging design. We have released videos demonstrating the effectiveness of the testing machine. Video of label scuffing reproduction ⇒ https://youtu.be/gn0DbCUVRwo Video of pinhole reproduction in pouch products ⇒ https://youtu.be/GgFcmkk-KWY Video of screw loosening verification ⇒ https://youtu.be/4SZxmHVHW9c * For those who wish to conduct actual tests, we also offer on-site demonstrations.
