Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
2521～2550 item / All 2941 items
Tilt device for large vehicles
This is an inclined device for large vehicles. The maximum incline angle is 65°. Both the load capacity and dimensions are custom-made, so it can be produced in the size you require. Options such as table stoppers and pole stoppers are also available. * Table dimensions: 5500X7000mm * Minimum height: 1680mm * Incline angle: 65° * Load capacity: 15000kg
It is mainly used as a durability and environmental testing device for solar cell modules!
We would like to introduce our "Test Equipment for Solar Cell Modules." This testing device employs a double chamber structure for the test chamber and utilizes a saturated two-fluid mixing method for humidity control. As a result, it enables the realization of a high-temperature and high-humidity environment (95°C, 95% RH) and can maintain high humidity consistently even when the temperature changes. 【Specifications】 ■ Temperature Range: -40°C to 100°C ±2.0°C ■ Humidity Range: 5 to 95% RH ±5.0% ■ Temperature and Humidity Control Range: Above 25°C ■ Effective Internal Dimensions: Custom-made to fit the size and number of modules *For more details, please download the PDF or feel free to contact us.
Solar radiation ranges from 0 to 1200 W/m², compliant with EPA standards! Testing is possible under various environmental conditions.
The "real vehicle environmental wind tunnel facility" is equipment that reproduces the environment during actual vehicle operation and tests the performance of car air conditioning systems and various components. By controlling and combining factors such as temperature, humidity, speed, and solar radiation, tests can be conducted under various environmental conditions. Please feel free to contact us when you need assistance. 【Specifications】 ■ Temperature range: -40℃ to +60℃ ■ Humidity range: 30 to 90% RH ■ Vehicle wind speed: 0 to 160 km/h ■ Solar radiation: 0 to 1200 W/m² (EPA standard compliant) ■ Rain/snow: Optional *For more details, please download the PDF or feel free to contact us.
There are movable test products, a switchable damper type for stationary test products, and a liquid tank type for movable test products!
The "Thermal Shock Test Equipment" repeatedly exposes test items to high and low temperatures in a short period to evaluate their durability and lifespan. There are several methods for switching between high and low temperatures, including moving test items, stationary test items with damper switching, and liquid tank test item moving methods. Please feel free to contact us when you need assistance. 【Features】 <Moving Test Item> ■ Can reduce the load, thus shortening the recovery time ■ Requires two tanks, resulting in a larger equipment size <Stationary Test Item with Damper Switching> ■ Increased load leads to longer recovery time ■ Only one tank is needed, resulting in a smaller equipment size *For more details, please download the PDF or feel free to contact us.
High-performance, flexible, and cost-effective tabletop machine.
The "zwickiLine" is a powerful, flexible, and cost-effective testing solution for a wide range of materials and components. It is suitable for research and development as well as routine quality assurance testing. With a wide range of equipment options, it can be used for testing components in plastics, elastomers, metals, composites, paper, cardboard, textiles, foams, food, medical engineering, and the pharmaceutical industry. 【Features】 ■ Intuitive and workflow-based from the start ■ Modern and high-quality load frame design *For more details, please download the PDF or feel free to contact us.
Testing machine for hole expansion tests of GPa-class high-strength steel plates with crack detection function.
Regardless of whether it is an internal combustion engine, EV, HEV, PHEV, or FC, the lightweighting of automotive body steel sheets has become an eternal theme in advancing the lightweighting of automobiles. To achieve lightweighting, the use of high-strength steel sheets raises the issue of poor workability, which automotive OEMs and Tier-1 companies are addressing through research to improve formability. As the strength of high-tensile steel sheets reaches GPa levels, existing formability testing machines are insufficient in capacity. We introduce a 1000 kN class formability testing machine (for hole expansion tests, deep drawing tests, Erichsen tests, etc.) as a solution to this problem. For individual inquiries, please visit https://www.zwickroell.com/ja/contact/. Japanese input is accepted, and contract testing is not conducted.
![[Test] Color: Sebolt (JIS K2580)](https://image.mono.ipros.com/public/product/image/43d/2001102763/IPROS38696606191023580729.png?w=280&h=280)
Mainly measuring light-colored samples such as kerosene and white oil! Introducing fuel testing analysis.
We would like to introduce the "Color: Saybolt" test, which is a fuel testing analysis conducted by our company. Using the Saybolt color test apparatus, we primarily measure light-colored samples such as kerosene and white oil. The measurement evaluation is conducted on a scale from the brightest +30 to the darkest -16. Please feel free to contact us if you wish to make an inquiry. 【Test Details】 ■Item Number: F101 ■Required Amount: 100ml ■Standard Number: JIS K2580 ■Main Target Oil Types: Kerosene (including jet fuel) *For more details, please refer to the PDF document or feel free to contact us.
![[Test] Shell Four Ball Test: LWI/WL/ISL](https://image.mono.ipros.com/public/product/image/b37/2001227979/IPROS37464617750535931951.jpeg?w=280&h=280)
Calculate the maximum non-seizing load (LNL) and the fusion load (WL), then compute the load wear index (LWI) for evaluation!
We conduct tests to measure the load-carrying capacity of lubricants. Four steel balls are stacked in a pyramid shape, and a sample is placed in a container. The upper ball is rotated under specified conditions. The four balls and the sample are changed for each test, and the process is repeated until welding occurs. The maximum non-seizure load (LNL) and the welding load (WL) are determined, and the load wear index (LWI) is calculated and evaluated. 【Test Details】 ■ Item Number: L390 ■ Required Amount: 500ml ■ Standard Number: ASTM D2783 ■ Target Oil Types: Machine oil, engine oil, automotive gear oil, industrial gear oil *For more details, please refer to the PDF document or feel free to contact us.
Measure the friction coefficient under temperature conditions ranging from 40 to 140℃ (in 20℃ increments)!
We conduct tests to evaluate the friction characteristics of hydraulic oils. Using a small clutch, we measure the coefficient of friction under temperature conditions ranging from 40 to 140°C (in 20°C increments). Please feel free to contact us if you have any inquiries. 【Test Details】 ■Item Number: L355 ■Required Quantity: 30ml ■Standard Number: JCMAS P047 ■Target Oil Type: Industrial Gear Oil *For more details, please refer to the PDF document or feel free to contact us.
![[Test] SAE No.2: Friction Characteristics Test](https://image.mono.ipros.com/public/product/image/a3a/2001231761/IPROS34453671681084649416.jpeg?w=280&h=280)
Evaluate the friction characteristics of the sample! Measurements will be taken while repeating the specified number of times.
We would like to introduce our lubricating oil test analysis "SAE No.2: Friction Characteristics Test." This test evaluates the friction characteristics of the sample. A friction plate and a steel plate are assembled in the testing machine, and the sample is filled. After applying a load to the plates, the measurement is taken while repeating the release action a specified number of times. Please feel free to contact us if you have any requests. 【Test Details】 ■ Item Number: L329 ■ Required Amount: 1,000ml ■ Standard Numbers: JASO M348, JASO T903, JCMAS P047 *For more details, please refer to the PDF document or feel free to contact us.
![[Test] Rotating Pressure Vessel Method Oxidation Stability: RPVOT](https://image.mono.ipros.com/public/product/image/3e0/2001237501/IPROS57179096349759518041.jpeg?w=280&h=280)
Continuous rotation in an oil bath at 150℃! Evaluating the oxidation stability of the sample.
We would like to introduce our lubricating oil test analysis "Rotating Pressure Vessel Oxidation Stability: RPVOT." This test evaluates the oxidation stability of the sample. A sample container with a metal catalyst is placed in a dedicated pressure vessel and continuously rotated in an oil bath at 150°C. The test result is the time taken for the internal pressure of the vessel to decrease by a certain amount due to the oxidation reaction. 【Test Details】 ■ Item Number: L310 ■ Required Amount: 200ml ■ Standard Number: JIS K2514-3 *For more details, please refer to the PDF document or feel free to contact us.
![[Test] Turbine Oil Oxidation Stability: TOST](https://image.mono.ipros.com/public/product/image/718/2001237514/IPROS72284098545482934938.jpeg?w=280&h=280)
Evaluate the oxidation stability of the sample! Determine the test time until the acid value is reached.
We would like to introduce our lubricating oil testing analysis "Turbine Oil Oxidation Stability: TOST." In a test container with a metal catalyst, a sample is placed, and the acid value after a predetermined test time (between 95°C for 700 to 3900 hours) or the test time until a predetermined acid value is reached is measured. This test evaluates the oxidation stability of the sample. 【Test Details】 ■ Item Number: L309 ■ Required Amount: 600ml ■ Standard Number: JIS K2514-2 *For more details, please refer to the PDF document or feel free to contact us.
![[Test] Shell Four Ball Test: WEAR](https://image.mono.ipros.com/public/product/image/8d0/2001237595/IPROS38732727894031621609.jpeg?w=280&h=280)
Measured the wear scar diameter of three fixed balls in the container! Evaluating wear resistance.
We would like to introduce the lubrication oil test analysis "Shell Four Ball Test: WEAR" that we conduct. This test measures the wear resistance of lubricating oil. Four steel balls are stacked in a pyramid shape, and after placing the sample in a container and heating it, the upper ball is rotated under specified conditions. After the test is completed, the wear scar diameter of the three balls fixed in the container is measured to evaluate wear resistance. 【Test Details】 ■ Item Number: L302 ■ Required Amount: 100ml ■ Standard Number: ASTM D4172 *For more details, please refer to the PDF document or feel free to contact us.
It is a device that measures the dynamic characteristics of semiconductors according to specified test conditions.
The "ST-2400" is a device designed for safely and efficiently conducting research and development, reliability testing, and destructive testing as a dynamic tester for power devices. It allows for the setting of up to 10 waveform analysis conditions with a single pulse application, enabling a reduction in evaluation time. The program for conducting tests requires only the input of necessary parameters for the condition items, making it easy to operate. Additionally, test results are saved in measurement data (CSV format) and waveform data (CSV format and JPG format), allowing for the creation of graphs and tables using commercial software (such as Excel). 【Features】 ■ Easy management of measurement data and waveform data ■ Top-class dynamic characteristic testing for power devices ■ Suitable for shortening product development time for power devices *For more details, please download the PDF or feel free to contact us.
Standard equipment for the test items required for avalanche testing. Contributing to the research, development, and evaluation of power devices.
The ST-1322 is a device that measures the avalanche characteristics of POWER MOS FET N-channel/P-channel under L-load conditions and performs GO/NG judgment. All test items are processed and analyzed by hardware, allowing for faster testing compared to conventional devices that use digital oscilloscopes. It can be connected online to a higher-level computer for data management and test condition management. Additionally, it has a self-test function. Please feel free to contact us if you have any requests. 【Features】 ■ Significantly improved speed ■ Capable of high current testing at low voltage *For more details, please download the PDF or feel free to contact us.
A method for evaluating the effects of X-rays on materials and their resistance!
We conduct "X-ray irradiation tests" at our company. X-rays have properties that make them suitable for non-destructive and quick verification of the internal state of materials, and they are used in various situations. On the other hand, interactions between X-rays and materials can affect product performance and may cause abnormalities such as discoloration. We would like to introduce X-ray irradiation tests as a method to evaluate the effects of X-rays on materials and their resistance. 【X-ray Irradiation Device Specifications】 ■ Tube Voltage: 40–160 (kV) ■ Tube Current: 1.0–12.5 (mA) ■ Tube Power: Max 800W ■ Built-in Filter: Be 0.8mm *For more details, please download the PDF or feel free to contact us.
The applicable standard is JEM1460! Testing can be conducted without considering the effects of sample scattering.
We would like to introduce the "Low Voltage Short Circuit Test Device" that we handle. This device intentionally creates a short circuit to apply excessive current to the sample. The test voltage can accommodate a wide range of voltages, and in three-phase configurations, both delta and star connections can be set arbitrarily, allowing for voltage output. Additionally, since there is a risk of the sample being damaged and scattering due to the short circuit, the sample is installed inside an explosion-proof chamber. 【Features】 ■ In addition to overcurrent testing of electrical products and short-duration current withstand testing, it is capable of reproducing failure events caused by overcurrent, continuous current testing, and combustion tests of electrical products that simulate tracking. ■ Testing can be conducted without considering the impact of sample scattering. *For more details, please refer to the PDF document or feel free to contact us.
Rapid temperature change cold and heat testing! Durability evaluation of products such as porcelain is possible.
We would like to introduce our "Thermal Shock Testing Equipment." By alternately immersing samples in hot and cold water at regular intervals, this thermal shock test provides rapid temperature changes, allowing for the durability evaluation of products such as ceramics. The operating temperature range is from -20°C to room temperature for the low-temperature section, and from room temperature to 100°C for the high-temperature section. Please feel free to contact us if you have any inquiries. 【Equipment Performance (Partial)】 ■ Operating Temperature Range - Low-Temperature Section: -20°C to Room Temperature - High-Temperature Section: Room Temperature to 100°C ■ Method - Low-Temperature Section: Single-Stage Compression Refrigeration Method - High-Temperature Section: Electric Heater Heating Method *For more details, please refer to the PDF document or feel free to contact us.
![[Test Equipment Introduction] High Voltage Tester](https://image.mono.ipros.com/public/product/image/2c7/2001160424/IPROS64355588620446002307.png?w=280&h=280)
Introducing equipment capable of high voltage and extra high voltage insulation resistance testing and insulation diagnosis for DC voltage!
We would like to introduce the "High Voltage Tester" that we hold. The output is a direct current voltage of 0 to 100 kV (negative polarity), capable of high voltage and extra high voltage insulation resistance testing and insulation diagnosis testing. The output accuracy is within ±2%. Please feel free to contact us when you need assistance. 【Device Performance】 ■ Output: Direct current voltage 0 to 100 kV (negative polarity) ■ Output Accuracy: Within ±2% - The input impedance of the recording device should be 1 MΩ or higher. *For more details, please refer to the PDF document or feel free to contact us.
![[Introduction to Testing Equipment] Tracking Erosion Test Equipment](https://image.mono.ipros.com/public/product/image/8eb/2001160431/IPROS89728093568512378652.png?w=280&h=280)
Sample configuration is available in horizontal and vertical arrangements! Testing in accordance with tracking and erosion tests is possible.
We would like to introduce our "Tracking Erosion Test Equipment" that we possess. Testing according to the "Tracking Erosion Test" in accordance with IEC 61109 or IEC 62217 is possible for the test samples. Additionally, it is also possible to measure the current flowing through the test samples. Please feel free to contact us when you need our services. 【Equipment Performance】 ■ Maximum Output Voltage: 18kV ■ Fog Chamber Volume: 10m³ ■ Sample Arrangement: Horizontal and Vertical Arrangement ■ Fog Discharge Rate: 1.5ml/h to 2.0ml/h (adjustable by changing the sprayer) *For more details, please refer to the PDF document or feel free to contact us.
![[Introduction of Testing Equipment] Gear-Type Aging Test Machine](https://image.mono.ipros.com/public/product/image/455/2001160442/IPROS66177047465961256470.png?w=280&h=280)
The temperature adjustment range is ±0.75℃ across the entire temperature range! The time to reach 200℃ from room temperature is approximately 50 minutes.
We would like to introduce our "Gear-type Aging Testing Machine." Among temperature tests, this testing device is particularly designed for aging tests of materials such as rubber, plastic, polyethylene, and vinyl, featuring a sample rotation function. By removing the sample rotation frame, it can also be used as a regular oven, allowing for a wide range of applications. Additionally, the temperature control circuit utilizes semiconductor bidirectional control elements, ensuring consistent temperature regulation across all set temperatures. 【Device Specifications】 ■ Temperature Range: 40℃ to 200℃ ■ Temperature Adjustment Range: ±0.75℃ across the entire temperature range ■ Heating Time: Approximately 50 minutes from room temperature to 200℃ ■ External Dimensions: W1190mm × D790mm × H1520mm ■ Internal Volume: 216L W600mm × D600mm × H600mm *For more details, please refer to the PDF document or feel free to contact us.
![[Introduction to Testing Equipment] Universal Material Testing Machine](https://image.mono.ipros.com/public/product/image/fa5/2001161408/IPROS85871157192254338078.png?w=280&h=280)
In addition to tensile and compressive strength measurements, cyclic load testing is also possible!
We would like to introduce our testing device, the "Universal Material Testing Machine." It is capable of applying tensile and compressive loads of up to 300 kN to samples made of metal and other materials. By breaking or deforming the material itself or processed samples, we can measure their strength. This testing machine allows for the measurement of mechanical properties such as the breaking load and yield point of materials by conducting tests specified by JIS and ISO standards. 【Features】 ■ Measurement of mechanical properties such as breaking load and yield point ■ Capability for cyclic load testing that varies test values at regular intervals ■ Detailed control and data analysis possible via a computer connected to the testing machine 【Applicable Standards】 - ISO 6892-2009 - JIS Z 2241 *For more details, please refer to the PDF document or feel free to contact us.
![[Introduction to Testing Equipment] Impact Testing Device](https://image.mono.ipros.com/public/product/image/f6d/2001161412/IPROS68622585569908800635.png?w=280&h=280)
The anti-recollision mechanism prevents double striking of evaluation samples! Automatic repeat operation is possible.
We would like to introduce our testing equipment, the "Impact Testing Device." Impact tests can be conducted on various items such as digital cameras, videos, mobile devices, LCDs, desktop computers, small home appliances, cosmetics, automotive parts like car stereos, and electronic components. The device can generate a wide range of arbitrary sine half-wave pulses with variable cushioning, allowing for impact testing. 【Features】 - A re-collision prevention mechanism to prevent double impacts on evaluation samples. - Air springs and hydraulic dampers to reduce impact on the surroundings. - Automatic repeat operation is possible by setting the number of cycles on the counter. 【Applicable Standards】 - JIS Z 0202 Packaging Goods - Drop Test Method - JIS E 3015 Railway Signal Safety Components - Impact Test Method - JIS C 60068-2-27 Environmental Testing Methods - Electrical and Electronic - Part 2-27: Impact Test Method (Test Code: Ea) *For more details, please refer to the PDF document or feel free to contact us.
![[Introduction of Testing Equipment] Universal Material Testing Machine 4](https://image.mono.ipros.com/public/product/image/431/2001163581/IPROS81742537899606400494.png?w=280&h=280)
Possible test samples include high-voltage insulators for power distribution and suspension insulators for power transmission! The applied load test is 100kV.
We would like to introduce the "Universal Material Testing Machine 3" owned by Kansai Electric Power Transmission and Distribution Company. It is capable of conducting tensile failure load tests while applying voltage in accordance with JIS C 3801-1 9 "Electrical Breakdown Load Test." The test specimens that can be used include high-voltage insulators for distribution and suspension insulators for transmission. 【Device Specifications】 ■ Load Method: Vertical Hydraulic Load Type ■ Maximum Load Capacity: 2000 kN ■ Effective Testing Space ・Tensile: Maximum 1100 mm, Compression: Maximum 1000 mm ■ Load Speed: Maximum 50 mm/min ■ Electrical Load Test: 100 kV *For more details, please refer to the PDF document or feel free to contact us.
Recommended for those in the manufacturing industry who are struggling with weather resistance testing!
We would like to introduce the "Accelerated Weathering Test Equipment" that we handle. It achieves a level of accelerated degradation equivalent to one year of UV exposure from sunlight in a short period of time. There is extensive support from our technical staff, who possess various know-how and expertise. We have several types of accelerated weathering test equipment, each with different features, allowing us to conduct tests tailored to our customers' needs. Additionally, after the weathering tests, we can also perform additional tests and performance evaluations in a centralized manner. 【Testing Equipment and Applicable Standards】 ■ Sunshine Weather Meter - JIS B 7753, JIS D 0205, JIS E 4037, JIS K 7350-4, etc. ■ Super Xenon Weather Meter - ASTM G 155, ISO 4655, JIS K 6266, JIS E 4037, ISO 4892-2, JIS K 7350-2, ISO 16474-2, JIS K 5600-7-7, etc. ■ Metering Weather Meter - No applicable standards (however, it can emit stronger UV radiation compared to other devices, enabling accelerated degradation in a shorter time) *For more details, please download the PDF or feel free to contact us.
![[Business Case] Melting Test](https://image.mono.ipros.com/public/product/image/4a1/2001126003/IPROS31101434333065781503.jpeg?w=280&h=280)
After evaluation, submit the results and discussion as a report! We can also suggest materials such as titanium and cast iron.
We conduct "erosion tests" at our company. As a general evaluation method, we immerse test pieces in molten metal and rotate them for several hours to compare the amount of erosion. Our evaluations primarily use aluminum alloys. We can also provide suggestions on treatment methods (surface coating, heat treatment, shot blasting) and coating types (application methods, types, thickness). 【Examples of Consultation Requests】 ■ Having trouble with erosion countermeasures for ladles in the die-casting manufacturing process ■ Want to know the changes in erosion amount when changing materials ■ Want to evaluate coating performance ■ Want to evaluate surface treatments and coatings for erosion countermeasures *For more details, please refer to the PDF materials or feel free to contact us.
Insulation breakdown tests can be measured with high accuracy. In addition to tests at room temperature, tests can also be conducted in insulating oil.
The "YST-243-B type" is a testing device designed to conduct insulation breakdown voltage and dielectric strength tests on insulating films, insulating plates, etc., in a rational manner. The maximum output voltage can be manufactured up to AC100KV (standard AC). Special attention has been paid to safety, and the design ensures that even if the device is used incorrectly, it will not lead to fatal accidents, allowing for safe use. Additionally, the detection current for breakdown can be freely set, enabling the configuration of appropriate detection current conditions tailored to the test specimen. 【Specifications and Features】 ■ Maximum output voltage [KV]: Selectable from AC20KV, 30KV, 50KV ■ Test temperature range: Room temperature ■ Voltage rise method: Electric method (automatic voltage increase) ■ Voltage rise speed [V/sec.]: Configurable ■ Automatic dielectric strength testing: Possible *For more details, please download the PDF or feel free to contact us.
