We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for heater.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

heater(heat) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

heater Product List

61～88 item / All 88 items

Displayed results
Micromax passive components stainless steel heater

Micromax passive components stainless steel heater

Heatel is a conductive paste (conductive paste) that can be used on SUS substrates, including conductors, resistors, and dielectric pastes.

At Seranise Electronics Materials Co., Ltd., we handle stainless heaters as passive components. Our lineup includes "H6000," a silver conductor that is leaded and can be plated or soldered, as well as "3500N," a lead-free dielectric insulating material for stainless substrates. Please feel free to consult us when you need assistance. 【Partial Lineup】 ■H6000 ■LF131 ■3500N ■H1625 ■H15R1 *For more details, please refer to the PDF materials or feel free to contact us.

  • Other electronic parts
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sanitary piping heater

Sanitary piping heater

Sanitary piping heater

This is an application product of a silicone rubber heater designed for easy attachment and detachment to sanitary piping. Unlike heaters that wrap around the piping in a coiled manner, the heating and insulation sections are integrated, which improves temperature reproducibility when disassembling the piping for cleaning and sterilization. The outer side of the heater is insulated, minimizing power consumption waste and preventing burns.

  • Other physicochemical equipment
  • Food Processing Equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC Heater 100V-650W Series SUS Base

NC Heater 100V-650W Series SUS Base

Ideal for semiconductor drying! Introducing our heaters.

We would like to introduce the "100V-650W Series (NCH Type)" that we handle. To minimize contamination caused by copper adhesion, as seen in the drying process of semiconductor silicon wafers, it is essential that there are no exposed copper wires in the air passage. Additionally, we can manufacture custom products using nickel wires instead of copper wires. For medical devices and other ultra-small component materials, we offer silver brazing, soldering, and deburring. Our products range from small capacities of AC100V-100W to large capacities of 200V-3KW, and we can custom manufacture heaters according to your desired capacity (W), outer shape, specified dimensions, materials, and glass tube shape. *For more details, please refer to the PDF document or feel free to contact us.

  • Wafer
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof heater 【-60 to +180°C】

Explosion-proof heater 【-60 to +180°C】

External temperature range: -60 to +180°C Protection level: IP68

Intertech today offers the most comprehensive range of explosion-proof heaters in the market, holding various global certifications such as IECEx, ATEX, CSAC US, TR CU (formerly GOST), and PESO. Our heaters are designed for flexibility in system configuration. They are certified by numerous international standards and are available worldwide in the form of individual heaters or enclosure configurations, significantly reducing design, system configuration, and maintenance costs. The operation of the heaters has been independently verified under conditions as low as -60°C, even in extremely cold environments, making it easier to design equipment for polar environments. If only simple protection against freezing is required, we recommend heaters with TS thermostats installed within the power supply cable, which operate independently and do not require control, providing a cost-effective solution. In cases where precise temperature control is necessary, or if the heater must operate and stop continuously, contact thermostats can be adjusted to approximately 2°C and are more effective at sensing air temperature. Alarm signals can also be provided.

  • Instrumentation and Control Systems
  • Non-ferrous metals
  • Power storage device
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Oven Heater Product Information

Oven Heater Product Information

MARUYA OVEN HEATERS "Air Heating Series"

In this document, we introduce the oven heaters from Maruya Kanagawa Manufacturing Co., Ltd. We offer a lineup that includes the "cart-type drying furnace," which uses a high-performance sheath heater as the heat source and adopts a hot air circulation method equipped with a blower, as well as the "conveyor oven (conveyor dryer)," which helps simplify work processes in factory operations and shorten production time. Additionally, we can accommodate various design requests as needed. 【Product Lineup】 ■ Cart-type drying furnace ■ Automatic door drying furnace ■ Conveyor oven (conveyor dryer) ■ Hot air generator *For more details, please download the PDF or contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Instantly turn cold water into hot water with a submersible heater.

Instantly turn cold water into hot water with a submersible heater.

By easily making hot water on the job site, efficiency is improved. It comes with a temperature regulator to prevent overheating.

The PIPE HEATER allows you to easily create hot water anytime and anywhere. It can be used for various water-related tasks such as removing dirt, washing cars, cleaning brushes, metal painting, plastering work, tile work, and cleaning. To use it, simply insert it into a plastic bucket and turn on the electricity; it is also designed to be safe and not damage the bottom of the bucket. For more details, please contact us or refer to the catalog.

  • Heating device
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Far infrared heater

Far infrared heater

Usable in vacuum conditions and clean rooms! A far-infrared heater with high design flexibility.

This heater adopts stainless steel for the substrate, achieving large size capabilities that were not possible with ceramic heaters while maintaining the high responsiveness of ceramic heaters. It also has the following features: ● Quick response ● High efficiency IR (infrared) characteristics ● High design flexibility (shape and watt density) ● Usable in clean rooms ● Usable in a vacuum

  • Other semiconductor manufacturing equipment
  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sheath heater

Sheath heater

The heating element positioned in the center of the pipe demonstrates excellent performance even at high temperatures.

A sheath heater refers to an electric heater in which a spiral heating element is filled with a highly insulating powder with good thermal conductivity in the center of a metal pipe.

  • Other machine elements
  • Other energy equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Space heater

Space heater

Highly efficient heating is possible! A flat heating heater covered with a metal plate.

The "Space Heater" is a flat heating heater that uses mica as the heating element and is covered or sandwiched with a metal plate. Compared to flat heating silicone rubber heaters, it has a higher temperature range and greater thermal output. It efficiently transfers heat directly from the heating element to the object being heated through conduction. 【Features】 ■ Higher temperature range and greater thermal output compared to silicone rubber heaters ■ Maximum operating temperature: 400°C (350°C for dry heating) ■ Very efficient heating ■ Direct lead wire type can also be manufactured ■ Custom shapes can be produced from a single unit with a short lead time *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-frequency nut heater

High-frequency nut heater

By heating the nut that has become stuck due to rust, corrosion, or burning, it can be easily loosened.

Introducing the "High-Frequency Nut Heater." Traditionally, nuts that have become stuck due to rust, galling, or seizing were heated with gas to expand the nut and create a gap in the threads to loosen it. By using induction heating, nuts can be easily heated in a short amount of time, simplifying the work and reducing time spent. By determining the heating conditions, it is possible to heat at the same temperature, which may allow for the reuse of nuts depending on their condition and the heating temperature. 【Features】 ■ Easily heat nuts in a short time using induction heating ■ Simplifies work ■ Reduces time *For more details, please refer to the PDF document or feel free to contact us.

  • Machinery and equipment installation/dismantling/relocation
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum immersion heater

Aluminum immersion heater

Low melting point molten solution immersion heater contributes to CO2 reduction.

The "immersion heater" is a type commonly used for preheating holding furnaces. Our company has a proven track record with aluminum immersion heaters and provides reliable heaters and thermocouples. This is a direct heating type aluminum heater with an integrated thermocouple. It is used for maintaining the temperature of aluminum melt in holding furnaces, managing outlet temperature, and maintaining the temperature at the tapping point. Please use aluminum heaters to maintain the temperature of the melt in the crucible. 【Example Specifications for Aluminum Heaters】 ■ Type for Preheating Holding Furnaces 【Structure of Aluminum Heaters】 The heating element of the aluminum immersion heater uses nichrome wire. The protective tube employs silicon nitride, which is most suitable for molten aluminum. For safety, it is equipped with an integrated thermocouple for overheating prevention.

  • Aluminum heater
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drum, pail, tote tank heater

Drum, pail, tote tank heater

Lineup of FM explosion-proof certified products! Equipped with an easy-to-adjust temperature variable thermostat.

We handle BriskHeat's "drum, pail, and TOTE tank heaters." They incorporate safe, grounded heating elements and are durable and long-lasting. We offer drum heaters for various standard containers and custom sizes made to order, available for 19, 57, 114, and 208-liter drums. Additionally, we provide a variety of standard products for freeze prevention, viscosity adjustment, temperature maintenance, and heating purposes. 【Features】 ■ Wide heater coverage area and high-output heater ■ Incorporates safe, grounded heating elements ■ Equipped with an easy-to-adjust temperature variable thermostat ■ FM explosion-proof certified products available ■ Full-jacket drum heaters come with a temperature controller featuring an alarm sound ■ We offer drum heaters for various standard containers and custom sizes made to order *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electric air heater capable of generating hot air and high-temperature gas at 1100℃.

Electric air heater capable of generating hot air and high-temperature gas at 1100℃.

An electric air heater capable of generating hot air and high-temperature gas at 1100℃! It features a patented unique heater structure that enables efficient heat exchange!

The "Kanthal Flow Heater" is an air heater capable of generating hot air and high-temperature gas at 1100°C. By using thicker Kanthal wire and adopting a special structure, the heat exchange rate has improved. Furthermore, it achieves the same performance with half the surface load. It solves problems such as needing high-temperature gas above 900°C and wanting a compact, long-lasting air heater! 【Features】 ■ Capable of generating hot air and high-temperature gas at 1100°C ■ Uses Kanthal wire that excels in high-temperature use and material stability ■ High heat exchange efficiency 【Examples of Applications】 ■ Evaluation equipment for fuel cells (SOFC) ■ Engine combustion test equipment for automobiles, EGR test equipment ■ Process gas heating for electronic components and semiconductors ■ Heat shrink packaging using gas ■ Preheating before welding ■ Mold preheating ■ Hot air drying furnace *For more details, please request materials or view the PDF data available for download.

  • Heating device
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Band heater

Band heater

A heater with a large contact area. It enables very efficient heating!

The "band heater" is a cylindrical heater used for heating the cylinder and nozzle parts of various injection molding machines. Its basic structure is the same as that of a space heater. As the name suggests, it has a large contact area due to being clamped from the outer circumference of the heating surface, making it an efficient heater. There are 1-piece (1P) and 2-piece (2P) types. The 2P type is mainly used when insertion from one end, such as with a cylinder, is difficult. Additionally, a lead wire type without terminals can also be manufactured. 【Features】 ■ Cylindrical heater used for heating the cylinder and nozzle parts of various injection molding machines ■ Very efficient heating possible as it closely adheres to the cylinder or nozzle ■ The outer plate is made of stainless steel (SUS430) or bonded steel plate, with the heating element protected by a covering ■ Very efficient heating possible by direct conduction from the heating element to the heated object ■ Custom shapes can be manufactured from a single piece with a short lead time *For more details, please refer to the PDF materials or feel free to contact us.

  • Other heaters
  • Piping Materials
  • Heating device
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Jacket heater / Mantle heater *Examples of production are currently posted!

Jacket heater / Mantle heater *Examples of production are currently posted!

Even with special shapes, we can produce from just one unit with a short lead time! This is a heater with insulation that covers the heated object. It can be used with low power, contributing to energy savings!

It is a structure that covers the heated object and is the only heater among many that has insulation material. Even when used at the same temperature, it has low heat loss, allowing it to be used with lower power than other heaters, and it can also be used as insulation material without incorporating heating wires. It can be freely shaped and produced in a short lead time from just one piece! 【Features】 ■ A structure that covers the heating wire with glass cloth and includes glass wool on the outside ■ Can be used with low power, contributing to energy savings ■ Can be used as insulation material without incorporating heating wires ■ Good fitting properties ■ Provides uniform heating ■ Minimal failure of the heater body (external damage, internal damage) and particle scattering ■ Less smoke generation during initial operation ■ Uses a double insulation structure of ceramic felt and silicate glass braid as heater coating insulation ■ Can be produced in a short lead time from just one piece, even in special shapes! *For more details, please download the PDF materials or feel free to contact us.

  • Other heaters
  • Piping Materials
  • others
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plug heater

Plug heater

The plug heater can be directly immersed in liquids for use and is suitable for water heating, chemical heating, and oil heating!

The origin of the term "plug heater" comes from "SCREW PLUG IMMERSION HEATER," which translates directly to "a screw-in heater that immerses the entire body in water within a tank." Its usability can be easily imagined from its appearance. Generally, inch screws are commonly used, and the number of sheath heaters is selected based on the size of the screw. Without the need for special tools or bolts, the screw part, which is a component of the plug heater, can be used directly as a plug, allowing for smooth heater replacement and a very convenient structure. 【Features】 ○ Can be directly immersed in liquid for use ○ Easy to heat water, chemical solutions, oil, air, etc. ○ Can be used simply by inserting it into the screw part attached to the tank ○ Heating suitable for the heated object can be achieved by selecting the material of the heater ○ The shape can be freely designed to match the mounting device and parts ○ Compatible with various sensors. For more details, please contact us or download the catalog.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible silicone rubber heater

Flexible silicone rubber heater

A very thin flexible surface heater with a thickness of 0.8mm to 1.6mm.

To provide soft heat over a wide area without creating hot spots (localized heating) and without altering the composition of the material. The free shape enhances the creativity of the design equipment. ■ Flexibility Softness ensures a perfect fit to the heating surface. ■ Diverse Shapes Accommodates complex shapes such as notches and holes. ■ Excellent Thermal Responsiveness Its thin and lightweight characteristics allow for extremely precise temperature control. ■ Superior Moisture Resistance, Weather Resistance, and Chemical Resistance Can be used safely even in harsh environments. The temperature range is from -70°C to a maximum of +340°C (heat-resistant specification), allowing for safe design.

  • Other heaters
  • Heating device
  • Temperature and Humidity Control
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mobile phase heater for liquid chromatography

Mobile phase heater for liquid chromatography

"Improving column efficiency while enhancing the reproducibility of individual sample retention times" by implementing preheating in semi-preparative and preparative HPLC systems.

The Timberline mobile phase heater is used to preheat the solvent in semi-preparative and preparative HPLC systems by controlling the temperature of the solvent. By using heated solvents, the viscosity of the mobile phase is reduced, enhancing column efficiency while improving the reproducibility of retention times for individual samples. This is particularly effective for large compounds such as DNA and RNA, as high-temperature conditions tend to improve mass transfer rates, leading to better peak shapes and separations. 【Features】 ◆ Compact ◆ Safe ◆ Trouble-free 【Specifications】 ■ Control temperature range: Room temperature +5℃ to 90℃ ■ Temperature stability: ±0.1℃ ■ Size 　・Heater: 134mmH x 220mmW x 343mmD 　・Controller: 83mmH x 204mmW x 229mmD ■ Piping materials: 316SS or Hastelloy C ■ Power supply: 120VAC

  • timberline_02.png
  • timberline_03.png
  • Other physicochemical equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin film sheet heater "HeatFlux" that can contribute to decarbonization.

Thin film sheet heater "HeatFlux" that can contribute to decarbonization.

Flexible thin film sheet heater that can generate heat with low voltage and low current.

"HeatFlux" is a flexible thin-film sheet heater with excellent electric heating efficiency. With a power of 60W (voltage: ~20V, current: ~3A), it features uniform surface heating that reduces power consumption and contributes to energy savings. Our self-developed power-saving temperature control system allows for precise temperature adjustments. It provides your products and systems with creative ideas and possibilities. Please feel free to contact us if you have any inquiries. [Features] - Stainless steel heating sheet - Minimal temperature variation with uniform surface heating - Lightweight, thin-film heater - Flexible and resistant to bending - High thermal conductivity due to close contact of the heating element - Made from stainless steel with heat resistance, corrosion resistance, conductivity, and electromagnetic wave shielding properties *For more details, please download the PDF or feel free to contact us.

  • Other heaters
  • Heating device
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High efficiency and energy-saving 'Simplex Heater'

High efficiency and energy-saving 'Simplex Heater'

By improving heating efficiency, energy consumption is reduced, and CO2 emissions are lowered. This infrared heating heater achieves both environmental impact reduction and cost savings.

The "Simplex Heater" is designed to minimize efficiency loss even at a distance, allowing for a reduction in unnecessary energy consumption. As a result, power usage during operation decreases significantly, and CO2 emissions can also be greatly reduced. Conventional infrared heaters experience a drop in heating efficiency when the distance increases, requiring excessive power. However, this product achieves efficient heating even at long distances. It is a sustainable heating solution that balances reduced environmental impact with lower running costs. 【Features】 ■ Reduces energy consumption and CO2 emissions with improved heating efficiency *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • Heater
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-quality 'Simplex Heater' with domestic components.

High-quality 'Simplex Heater' with domestic components.

All components are domestically produced, ensuring superiority in terms of quality, delivery time, and cost. This is an infrared heating heater that allows for safe and stable operation.

The "Simplex Heater" sources all of its components domestically, achieving excellent QCD in terms of quality stability, adherence to delivery schedules, and cost management. Domestic production allows for rapid response in the event of any issues, minimizing operational risks. Furthermore, by using domestically produced parts, stable heating performance during the process is ensured, contributing to a reduction in long-term operational costs. It is an infrared heating solution that pursues a balance between quality and efficiency. 【Features】 ■ All components are domestically produced, excelling in terms of QCD. *For more details, please refer to the related links or feel free to contact us.*

  • Other heaters
  • Heater
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Versatile unit combination "Simplex Heater"

Versatile unit combination "Simplex Heater"

It is an infrared heating heater module that can combine multiple units according to the required temperature, allowing for free adjustment of the heating range and output.

The "Simplex Heater" allows for a unit configuration that combines multiple heaters, enabling optimal temperature control according to the heating target and process. By simply increasing or decreasing the number of units, it is possible to adjust the output and heating range, allowing for flexible installation tailored to the line or equipment. Thanks to its parallel light design, it can efficiently heat even at long distances, minimizing overall temperature variation even when multiple units are connected. It is an excellent infrared heating solution in terms of installation cost and ease of construction. 【Features】 ■ Can be introduced with multiple combined units according to the required temperature. *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • Heater
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Far Infrared Electric Heater "HEATSTRIP"

Far Infrared Electric Heater "HEATSTRIP"

A design that matches the aesthetics of any building, delivering only a pleasant warmth. It can also be used as an outdoor heating device, making effective use of space.

The "HEATSTRIP(TM)" is an infrared heating device suitable for personal and commercial use in terraces, courtyards, balconies, open cafes, and more. With a simple and stylish design that hardly resembles a heating device, it can be installed in various locations, allowing for effective use of space with options for ceiling or wall mounting. It operates without emitting a red glow on the surface, delivering warmth without compromising the ambiance. The infrared technology quickly raises the temperature of objects internally, providing targeted spot heating exactly where you want it! It achieves excellent heating efficiency at a low cost, and requires minimal maintenance from customers. 【Features】 ■ Design that can be installed in any location ■ Comfortable warmth from infrared radiation ■ Resistant to rain and water ■ Innovative design that reduces running costs ■ No light, sound, or odor emitted *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Research Material] Global Market for Packaging Machine Heaters

[Research Material] Global Market for Packaging Machine Heaters

Global Market for Packaging Machine Heaters: High-Density Heaters, Medium-Density Heaters, Low-Density Heaters, Automotive Industry, Pharmaceutical Industry, Electrical and Electronics Industry, Others

This research report (Global Packaging Machine Heater Market) investigates and analyzes the current status and outlook for the global packaging machine heater market over the next five years. It includes information on the overview of the global packaging machine heater market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the packaging machine heater market include high-density heaters, medium-density heaters, and low-density heaters, while the segments by application cover the automotive industry, pharmaceutical industry, electrical and electronics industry, and others. The regional segments are divided into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa, to calculate the market size of packaging machine heaters. It also includes the market share of major companies in the packaging machine heater market, product and business overviews, and sales performance.

  • Other services
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Self-regulating film heater "SmartHeat SLT"

Self-regulating film heater "SmartHeat SLT"

Preventing the solidification of materials such as powders and food! A self-regulating film heater that can be easily installed.

"SmartHeat SLT" is a self-regulating film heater that does not burn out even in the event of a malfunction. Even with improper heater installation, it rarely overheats, resulting in minimal load on the equipment. ■ Comparison with conventional heaters Conventional heaters can accumulate heat internally when there is poor adhesion, leading to burning issues. However, in the case of this product, the resistance value sharply increases from a certain temperature, stopping the power supply and preventing it from exceeding a certain temperature, thus avoiding burning. Additionally, while conventional heaters are affected by temperature changes when in contact with foreign objects of different temperatures, this product controls each area independently, so only the area in contact with the foreign object adjusts its power to maintain temperature. The surrounding areas do not experience temperature changes and are unaffected. 【Features】 ■ Does not burn out even in the event of a malfunction ■ Responds to changes in the surrounding environment ■ Simplifies the system ■ Can be easily installed without requiring modifications to the equipment *For more details, please refer to the PDF document or feel free to contact us.

  • Other FA equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Micromax Automotive Stainless Heater

Micromax Automotive Stainless Heater

A solution that enables heater formation on stainless steel substrates!

We handle Micromax "Heatel" that can be used on SUS substrates. Heater patterns can be formed on stainless steel substrates. We offer resistors with a wide range of combinations of dielectric materials for insulation, solderable conductors, and plating conductors, as well as a wide range of resistivity/HTCR. This maximizes the flexibility of electronic design. Please feel free to contact us when you need assistance. 【Lineup (partial)】 ■H6000 ■LF131 ■3500N ■3510N ■3515N *For more details, please refer to the PDF materials or feel free to contact us.

  • Other Auto Parts
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to heater

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.