inspection Product List and Ranking from 354 Manufacturers, Suppliers and Companies

Software development and implementation services

We contribute to the information society through the development and sales of computer systems.

Our company provides meticulous services that accurately respond to customer needs, from software development to implementation and operational training. We base our systems on a "simple" and "balanced" approach, creating areas of expertise that allow each employee to leverage their individuality. Additionally, we optimize systems to align with our customers' business operations. 【Business Overview】 ■ Construction of office improvement systems ■ Development support through engineer dispatch ■ System development ■ System support *For more details, please download the PDF or contact us.

Company：システムオーディット
Price：Other

Software (middle, driver, security, etc.)
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Toshiba Computer Technology Corporation Circuit Board Inspection

We will design and manufacture a functional inspection device for the substrate. Stress testing and reliability evaluation will be conducted as needed.

We conduct functional inspections of substrates, stress tests, and reliability evaluations of soldered areas, and we respond quickly to identify (analyze) the failure points of defective substrates and repair them. Additionally, by identifying the causes of defects and providing feedback, we contribute to improving the yield of mass-produced products and enhancing market quality.

Company：東芝コンピュータテクノロジー本社
Price：Other

Semiconductor inspection/test equipment
inspection

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

X-ray inspection

We will inspect areas that are not visible to the naked eye.

We conduct inspections of BGA, CSP, and bottom electrode components using X-ray inspection machines. For more details, please contact us or download the catalog.

Company：レシップ電子
Price：Other

Technical and Reference Books
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Micro assembly and inspection

Microscale assembly that must be performed under a microscope. We undertake visual inspections at high magnification under a microscope.

Our company utilizes semiconductor assembly and inspection technology to perform fine assembly and inspection. Of course, this work is done in a clean room. To date, we have a track record of micron-order component joining, adhesive assembly, fine soldering, and visual inspection of subcomponents and IC chips.

Company：ハヤシレピック第３事業部
Price：Other

EMS
Other semiconductors
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic Principles of Near Infrared Analyzers (Near Infrared Spectrometers) [NIR Technical Document]

An introductory NIR technology booklet that explains the principles of near-infrared analyzers (near-infrared spectrometers) in an easy-to-understand manner without using formulas.

This is an introductory NIR technology booklet that explains what can be done with near-infrared analyzers (near-infrared spectrometers) without using complicated formulas. It is available for free download. It can be used as a text for those measuring with near-infrared analyzers (near-infrared spectrometers) for the first time and for their supervising managers. (PDF, 13 pages)

Company：メトロームジャパン本社
Price：Other

Spectroscopic Analysis Equipment
Food Testing/Analysis/Measuring Equipment
Moisture Measuring Device
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simultaneous Measurement of Lubricating Oil Quality Parameters Using Near-Infrared Analyzer [Technical Document]

Application for rapidly measuring the acid value of lubricating oil using near-infrared spectroscopy (NIR) along with kinematic viscosity and moisture【Oil & Petrochemicals】.

Using visible-near infrared (Vis-NIR) spectroscopy, we determined several chemical and physical parameters in lubricating oil, including acid value (AN), kinematic viscosity at 40°C, moisture content, and color. This application note presents an example of how these parameters were measured quickly and simultaneously using Metrohm's near-infrared analyzer (Vis-NIRS).

Company：メトロームジャパン本社
Price：Other

Lubricants
Spectroscopic Analysis Equipment
Lubricants and additives
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quality Control of Polypropylene (PP) Using Near-Infrared Analyzer [Technical Document]

Non-destructive and easy measurement of melt index (melt flow rate) using near-infrared analysis without conducting rheology tests!

【Near Infrared Analyzer Technical Data 9 Petrochemicals Fibers】 To mold polypropylene (PP) resin into the desired shape, it must first be melted, making flow properties a crucial characteristic that influences the manufacturing process. One of the parameters that represent flow properties is the Melt Index (MI), also known as Melt Flow Rate (MFR). This measures the mass of material extruded from a die within a specified time (ASTM D1238). The standard procedure requires many tasks, such as packaging the sample, preheating, and cleaning. Visible near-infrared spectroscopy, which does not require sample pretreatment or chemicals, enables MFR analysis in less than one minute.

Company：メトロームジャパン本社
Price：Other

Spectroscopic Analysis Equipment
plastic
Engineering Plastics
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Near-infrared analyzer: Quantitative analysis in accordance with ASTM E1655 [Technical Document]

Hints for developing calibration curve models for quality control using near-infrared analysis in the manufacturing processes of gasoline, petroleum, diesel oil, and lubricating oil.

Near-infrared analysis (NIRS) is a quantitative analytical method widely used in various industrial sites and laboratories. This white paper aims to describe the method development workflow for quantitative analysis in accordance with ASTM E1655.

Company：メトロームジャパン本社
Price：Other

Spectroscopic Analysis Equipment
plastic
Composite Materials
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quality Control of Gasoline Using Near Infrared Analysis (NIR) [Technical Document]

Measure research octane number, motor octane number, anti-knock index, aromatic content, and density all at once with a near-infrared analyzer!

【Near Infrared Analyzer Technical Data 15 Petroleum Gasoline Fuel】 The measurement of key quality parameters of gasoline, including Research Octane Number (RON, ASTM D2699-19), Motor Octane Number (MON, ASTM D2700-19), Anti-Knock Index (AKI), aromatic content (ASTM D5769-15), and density, required several different analytical methods, which were labor-intensive and required skilled technicians. This application note demonstrates a cost-effective analytical method for analyzing multiple parameters of gasoline simultaneously using the XDS RapidLiquid Analyzer, which measures in the visible-near infrared region (Vis-NIR).

Company：メトロームジャパン本社
Price：Other

Near-infrared spectrophotometer
Spectroscopic Analysis Equipment
Lubricants
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measurement of Epoxy Resin Using Near-Infrared Analyzer [Technical Document]

An application that simultaneously measures multiple parameters of epoxy resin using near-infrared analysis!

"Near Infrared Analyzer Technical Data 20 Petrochemicals Epoxy Resin" discusses the feasibility of using Vis-NIRS for simultaneous measurement of multiple chemical and physical parameters of epoxy resins. Vis-NIRS is a rapid method that serves as an alternative to traditional laboratory analysis techniques, allowing for quicker raw material inspection, process monitoring, and final product quality control.

Company：メトロームジャパン本社
Price：Other

plastic
Other polymer materials
Spectroscopic Analysis Equipment
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Near-infrared analyzer Polyvinyl alcohol saponification degree [Technical Data]

Application for measuring the saponification degree of polyvinyl alcohol using near-infrared spectroscopic analysis!

Near Infrared Analyzer Technical Data 21 Petrochemicals Polyvinyl Alcohol Polyvinyl alcohol (PVA) has low toxicity, is less likely to adhere to proteins, and has film-forming properties, making it suitable for various pharmaceuticals (such as eye drops). PVA is a linear polymer and a copolymer of vinyl acetate and vinyl alcohol. The ratio of hydroxyl groups to all functional groups in the molecule is referred to as the saponification degree. This is an important indicator of the product's solubility, viscosity, and adhesiveness.

Company：メトロームジャパン本社
Price：Other

Pharmaceutical materials and carriers
fiber
Spectroscopic Analysis Equipment
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Process Analysis Instrument Technical Documentation: Quality Control of Wafer Cleaning Tanks

Simultaneous analysis of ammonium hydroxide, hydrogen peroxide, and hydrochloric acid in the wafer cleaning tank monitored by inline near-infrared analyzer!

In semiconductor manufacturing, standard cleaning processes are conducted in wet benches within clean rooms, where the environment is controlled to prevent further contamination. However, it is common for space to be very limited for installing analytical instruments in such environments. To monitor the main parameters of cleaning solutions simultaneously, more safely, efficiently, and quickly without using reagents, inline analysis using near-infrared spectroscopy (NIRS) is effective. Online analyzers, process analyzers, inline analyzers.

Company：メトロームジャパン本社
Price：Other

Spectroscopic Analysis Equipment
Wafer
Water quality testing
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis of sugar content, glucose, etc. using near-infrared analyzer (NIR) [Technical Document]

Simultaneous measurement of sugar content (Brix), sucrose, fructose, and glucose using a near-infrared analyzer.

Near Infrared Analyzer Technical Data 23 Food and Beverages Sucrose, glucose, and fructose are three common sugars that are absorbed in different ways in the body. These sugars have slightly different effects. A key factor in their impact on our health is whether these sugars are naturally present in food or added during processing. The measurement of individual sugars and Brix (sugar content; °Bx, a scale for dissolved sugar content) is an important quality parameter in the food industry. These measurements can be performed using High-Performance Liquid Chromatography (HPLC), Ion Chromatography (IC), or Thin Layer Chromatography (TLC). However, these methods tend to be time-consuming and have high running costs. On the other hand, Near Infrared Spectroscopy (NIRS) can measure many sugars simultaneously within one minute without the need for chemicals or sample pretreatment.

Company：メトロームジャパン本社
Price：Other

Near-infrared spectrophotometer
Food/beverage component analyzer
Brix Meter
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quality Control of Chocolate Bars Using Near-Infrared Analysis【Technical Document】

Rapid quantification of calories, fat, saturated fat, carbohydrates, sugar, and protein in chocolate bars using near-infrared analysis (NIR)!

【Near Infrared Analyzer Technical Data 27 Food and Confectionery】 The production of food requires strict quality control to ensure its quality and protect consumers. Confectionery products, such as chocolate, are required to manage the final product to meet regulations and ensure consistent quality, which is especially important for luxury items. Near-infrared spectroscopy is a fast analytical method that requires no sample preparation and does not use chemicals, allowing for the determination of many important quality control parameters of chocolate bars. Near-infrared analyzers are easy to use and can be utilized in quality control laboratories as well as in environments close to the production site.

Company：メトロームジャパン本社
Price：Other

Near-infrared spectrophotometer
Food Testing/Analysis/Measuring Equipment
Food/beverage component analyzer
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quality Control of Dried Cannabis Using Near-Infrared Analysis Equipment [Technical Document]

Efficiency testing without chemical reagents in under one minute using near-infrared analysis (NIR)!

【Near Infrared Analyzer Technical Data 29 Pharmaceuticals】 Cannabis has a long medical history as a recreational drug and as an analgesic and antispasmodic. The discovery of the major cannabinoids tetrahydrocannabinol, cannabidiol, and cannabigerol (THC, CBD, and CBG) has increased interest in its medical effects. THC is psychoactive and classified as an illegal drug in most countries, while CBD is legally accepted for medical purposes in many regions around the world. CBD is believed to alleviate anxiety and stress and promote better sleep. Due to the various effects and potential legal implications, determining the cannabinoid profile in cannabis has garnered significant interest. Generally, efficacy testing of cannabis is conducted using HPLC analysis. HPLC can detect low concentrations of cannabinoids but requires chemical reagents and is quite time-consuming. This technical document explains why near-infrared spectroscopy (NIR) is an excellent method for quantifying THC, CBD, and CBG in dried cannabis, as it provides results in less than one minute and does not require chemical reagents.

Company：メトロームジャパン本社
Price：Other

Near-infrared spectrophotometer
Other physical property measurements and component analysis
Pharmaceutical materials and carriers
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quality Control of Zero-Calorie Sweeteners Using Near-Infrared Analyzers [Technical Document]

Rapid quality control of zero-calorie sweeteners such as stevia and sucralose using near-infrared analysis (NIR).

The use of zero-calorie sweeteners as sugar substitutes in food products has dramatically increased over the past decade in soft drinks and snacks. Two examples of this are stevia, derived from the leaves of the Stevia rebaudiana plant, and sucralose, a chlorinated sucrose derivative. Both are much sweeter than sugar and are used at much lower concentrations in food. On the other hand, regulations regarding zero-calorie (non-nutritive) sweeteners have become stricter to ensure food safety. In response to these regulations, various sweeteners can be measured using high-performance liquid chromatography (HPLC), ion chromatography, and thin-layer chromatography; however, these measurement methods are time-consuming and have high running costs. By using near-infrared spectroscopy (NIRS), it is possible to simultaneously quantify several types of sweeteners in under one minute without the use of chemicals and without the need for sample pretreatment.

Company：メトロームジャパン本社
Price：Other

Food Testing/Analysis/Measuring Equipment
Near-infrared spectrophotometer
Food/beverage component analyzer
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AI Count App 'cazoeTell'

An easy AI counting application for smartphones and computers. Just take a photo of the subject to be counted, and the counting results will be displayed.

"CazoeTell" is an application that displays counting results simply by taking photos of the items to be counted. It enables counting with a highly accurate learning model that perfectly fits the application by using real images taken in actual field environments for training. Additionally, thanks to its unique high-resolution processing algorithm, it excels at counting very small and densely packed items. 【Features】 ■ Instantly counts target objects in images ■ Specialized for counting ■ Fast and high-precision AI counting ■ Usable on both PC and smartphone ■ Equipped with various functions *For more details, please download the PDF or feel free to contact us.

Company：スカイロジック
Price：Other

counter
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inspection technique: Inspection with two 14-megapixel cameras.

We will conduct operational verification when connecting two high-resolution (14 million pixels) cameras to one computer and starting them simultaneously!

In recent years, with the miniaturization and precision of machinery and equipment, smaller components are often used, and when performing image inspection of such small-sized parts, high-resolution cameras are increasingly utilized for imaging. However, when using high-resolution cameras, a high-spec computer is also required to connect the cameras. Therefore, in this report, we would like to present the operational verification and results of connecting two high-resolution (14 million pixels) cameras to a single computer and starting them simultaneously. As a result of the verification, we were able to display the screens of both 14 million pixel cameras on a single computer screen. (Figure 1) Additionally, the image below shows the image captured by one of the two connected cameras. It is possible to detect parts that are less than 2mm (approximately 0.8×1.6mm) within a field of view of about 100mm square. (Figure 2 shows an enlarged image of the part outlined in red in the overall image on the left.)

Company：スカイロジック
Price：Other

Visual Inspection Equipment
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical Support: AI Inspection of Agricultural Products

We will classify potatoes and detect tomato injuries using AI image inspection!

Recently, we have been receiving inquiries asking if the inspection of agricultural products we are currently conducting can be made a bit easier. Using vegetables provided by local farmers, we tested whether we could: ■ Classify potatoes by grade ■ Detect damage on tomatoes using SkyLogic. ▼ Potato Classification We photographed potatoes classified from A to C from different angles (a total of 66 images were taken), and after creating the training data and conducting inspections, we were able to classify them into grades A, B, and C. (All 30 images were classified correctly, achieving a 100 percent accuracy rate.) ▼ Detecting Damage on Tomatoes Since it was difficult to find damaged tomatoes, we tested whether we could detect damage on one type. Similar to the potatoes, we photographed them from different angles (12 images), created training data, and conducted inspections, resulting in the detection of damage as shown in the images. (All 30 images were inspected, and all damage was detected, achieving a 100 percent accuracy rate.)

Company：スカイロジック
Price：Other

Visual Inspection Equipment
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AI Image Inspection Software] Wire Harness Clip Inspection

Detects defects in the connector part of the harness and the insertion tabs!

There was a request for inspection due to a malfunction in the connector part of the harness, specifically with the insertion tab. Detecting small parts' careless mistakes, which can be easily overlooked in line work, is a specialty of our software, EasyInpector. 【Inspection Settings and Results】 EasyInpector's "Color Comparison Inspection and Presence of Specified Color Inspection" detects the color of the tab at the pixel level. If the measurement results fall outside the set range, it can be judged as "failed." The inspection was conducted at four locations with a cycle time of 0.19 seconds. 【Software and Equipment Used】 Software Used: EasyInspector310 Field of View: 14 x 11mm Minimum Size of Inspection Target: 1mm Number of Inspection Points: 4 Camera Resolution: 1.3 Megapixels Lens Focal Length: 50mm lens + 10mm close-up ring Distance Between Lens and Product: 200mm Lighting: Desk Stand

Company：スカイロジック
Price：Other

Image Processing Software
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Assembly to shipping inspection of electronic components and medical devices.

A production system that builds trust through advanced quality control and inspection techniques. You can also rely on us for contract processing related to LCD displays and medical devices.

Konishi Seiko Co., Ltd. contributes to a wide range of fields with a production system that builds trust through high-precision quality control and inspection technology. ◆ Related to LCD Displays State-of-the-art facilities that guarantee impeccable quality, including clean rooms. From contract manufacturing to line operation and quality management, we have established a reliable production system in the LCD display manufacturing field, where the best technology is utilized. ◆ Related to Information and Communication Equipment As the diversification of computer equipment and the construction of mobile network infrastructure progress, there is a growing demand for higher quality information and communication equipment options. Our technology, which captures various aspects of the "information and communication equipment" field, responds to social and market needs, continuously supporting the foundation of your life in an information-oriented society. ◆ Related to Analytical and Measuring Instruments Analytical and measuring instrument products are always required to be precise and accurate, and the demand for miniaturization and precision is accelerating, leading to changes in technology. We respond to the needs of numerous users in the field of "analytical and measuring instrument" manufacturing. *For more details, please download our catalog or feel free to contact us.

Company：コニシセイコー
Price：Other

Processing Contract
Special Processing Machinery
Other measurement, recording and measuring instruments
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Please leave the inspection matters to us.

Supports semiconductor packages and more! We support your quality with diverse inspection experience and achievements!

"Due to the presence of defective parts mixed in with the delivered components, sorting has become necessary." "Are there any issues such as the need to conduct inspections in a clean room?" Our company supports your quality with a diverse range of inspection experience and achievements. We handle semiconductor packages, sorter panels, glass products, resin molded products, rubber products, and more. Leave the inspections to us. 【Do you have any of these issues?】 ■ Due to the presence of defective parts mixed in with the delivered components, sorting has become necessary. ■ The quality of parts imported from overseas is unstable, so we would like to conduct inspections before delivery. ■ The quality of manufactured parts is unstable, leading to the need to categorize them into three ranks. ■ As a trading company, we do not have the capability or capacity to conduct inspections in-house. ■ There is a need to conduct inspections in a clean room. *For more details, please refer to the PDF document or feel free to contact us.*

Company：コニシセイコー
Price：Other

Contract Inspection
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Inspection Case] Lighting and functional inspection of LCD modules from overseas manufacturers.

Defective LCD modules from overseas manufacturers. Sorting inspection using jig computers. Solving issues domestically without sending them overseas, reducing transportation costs and ensuring short delivery times!

We would like to introduce a case study of problem-solving involving the inspection of LCD modules for lighting and functionality. Our client requested an inspection using lighting fixtures and computers because defects were discovered in the LCD modules manufactured overseas upon delivery. To respond promptly, we coordinated with other departments and implemented overtime as necessary. We managed product lot control and provided daily inspection performance reports. The urgently needed quantities were directly shipped to the specified destination via a charter service arranged by our company. As a result, the procedures and costs for sending the products overseas were eliminated, and most importantly, we were able to meet the production line deadlines without delay, for which we received great appreciation. Additionally, we heard that the client was pleased that the issue did not escalate into a major problem and was resolved. 【Proposal Case (Partial)】 <Problem> ■ There was no time to spare for re-delivery due to the sudden discovery of defects. ■ Issues with transportation procedures to overseas. <Proposal Content> ■ Ship the inspected items in boxes as they are completed via charter service to the client. <Result> ■ We managed to avoid difficulties by meeting the production line schedule. *For more details, please refer to the PDF document.

Company：コニシセイコー
Price：Other

Contract Inspection
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Inspection Case] Visual inspection of resin molded products manufactured overseas. Reduction of manufacturing losses.

Detecting various defects such as poor molding, defective insert nuts, scratches, and dirt. Identify the causes in overseas manufacturing lines, implement corrective actions, and reduce manufacturing losses!

We would like to introduce a case study of a problem-solving initiative related to the inspection of resin molded products. "We received a request for inspection due to a consultation from our client, stating that defects were detected when delivering resin products molded overseas, resulting in a lot being rejected. They asked for urgent assistance." In response, we conducted a visual inspection. Among the various defects such as scratches, dirt, chipping, and printing issues, we quickly provided feedback to our client regarding the most prominent defect items. Thanks to the prompt feedback, the outflow of defects from the overseas manufacturing line was minimized, and corrective actions were taken to identify the root cause. Our client was very pleased with the reduction in manufacturing losses and the quick recovery (re-delivery) to the delivery destination. [Proposal Case] <Issue> ■ Due to various defects including molding defects, insert nut defects, scratches, and dirt, a significant amount of inspection time was required. <Proposal Content> ■ We divided the inspection items (scope) and distributed them across several processes for inspection. <Result> ■ By inspecting the frequently occurring defects first during the inspection process, we were able to shorten the inspection time, and the quick feedback contributed to the reduction of manufacturing losses.

Company：コニシセイコー
Price：Other

Contract Inspection
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microbial testing [identification tests/structural analysis/research]

Technical services specialized in microorganisms by staff with expertise in microbiological taxonomy.

All industries are paying attention to microbiological testing! For example, pharmaceuticals, food, industrial products, energy, waste treatment, and environmental purification. Our company addresses the safety of food, environment, and products with specialized staff in microbial taxonomy. We also host seminars on microbial identification techniques. ■ Microbial identification testing ■ Microbial community structure analysis ■ Microbial taxonomy research

Company：テクノスルガ・ラボ
Price：Other

Contract Inspection
inspection

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sunny Corporation Business Introduction

We provide a safe and secure convenient usage environment with new ideas!

Efforts toward the environment have become an unavoidable challenge for companies. Sunny contributes to your environmental initiatives through the manufacturing and sales of eco-friendly stationery such as whiteboard markers, marker pens, and adhesive sheets. We want to provide a safer, more secure, and environmentally friendly usage environment with new ideas that enhance convenience. That is our aspiration. For more details, please contact us or refer to our catalog.

Company：サニー
Price：Other

Office supplies and stationery
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Substrate inspection

Various inspections tailored to product specifications are possible! We would like to introduce our "Circuit Board Inspection."

At Shinshu Koden Co., Ltd., we conduct "circuit board inspection." We have introduced an automatic visual inspection system using image recognition to inspect fine components and soldering conditions that cannot be distinguished by the human eye, ensuring high reliability. Please feel free to consult us when you need our services. 【Inspection Details】 ■ Power-on Inspection ■ Image Inspection ■ Visual Inspection ■ Non-destructive Inspection using X-ray Equipment *For more details, please refer to the related links or feel free to contact us.

Company：信州光電
Price：Other

Circuit Board Inspection Equipment
X-ray inspection equipment
Visual Inspection Equipment
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Security inspection

This is an introduction to open inspections and inspections during use.

Comprehensive Non-Destructive Testing Co., Ltd. is a company that "sees the unseen." This is an introduction to security inspections. Open inspections In-service inspections Regular inspections of various plants Concrete structure investigations are conducted. For more details, please contact us.

Company：綜合非破壊検査本社
Price：Other

Other measurement, recording and measuring instruments
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inspection of the setting of expiration dates and best-before dates for food products.

Inspection of the setting of expiration dates and best-before dates for food ingredients and products.

Expiration Date Setting Test The expiration date indicates the period during which food can be safely consumed, typically focusing on perishable ingredients and showing a short duration of a few days to a few weeks. It is often determined based on the proliferation of microorganisms. Best Before Date Setting Test The best before date indicates the period during which food can be enjoyed at its best quality, usually focusing on shelf-stable ingredients and showing a longer duration of a few weeks to several years. It is often determined based on indicators such as water activity, oil acidity, and the denaturation of components like proteins. Accelerated Testing; When setting the best before date, conducting tests over a long period can often be impractical, so a method is employed to shorten the storage period by raising the storage temperature and using theoretical calculations (Arrhenius equation = when the temperature increases by 10°C, the reaction time doubles) to conduct accelerated testing.

Company：メイプルバイオラボラトリーズ
Price：Other

Safety Management
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microbial testing of cosmetics and pharmaceuticals.

We have obtained permits for cosmetics manufacturing and cosmetics manufacturing and sales, and we will conduct tests in testing facilities (BSL2) in accordance with the Pharmaceutical and Medical Device Act.

In standard testing, total viable count, coliforms, E. coli, and Staphylococcus aureus are tested as a set. Upon request, it is also possible to add Pseudomonas aeruginosa, Salmonella, Vibrio parahaemolyticus, Campylobacter, Bacillus cereus, O157, MRSA, periodontal pathogens, Legionella, Serratia, etc. Measurement of antibacterial activity using the above microorganisms (inhibition zone, mixed culture) is also possible. The method for calculating the coal tar coefficient involves varying the concentration of the antibacterial substance in several ways and varying the reaction time with the microorganisms at several points, performing a mixed culture that combines concentration and reaction time. This allows us to determine the relationship between the concentration of the antibacterial substance and the reaction time, enabling the assessment of the immediate and sustained efficacy of the antibacterial agent. Preservative efficacy testing (compliant with JP, USP, EP) involves dropping five types of microorganisms into pharmaceuticals, etc., and measuring the microbial count after a certain storage period. This method investigates the effectiveness of microbial control when microbial contamination occurs in the relevant pharmaceuticals, etc. Aseptic testing determines whether there is no microbial contamination in cosmetics, pharmaceuticals, etc.

Company：メイプルバイオラボラトリーズ
Price：Other

Safety Management
inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

inspection Product List and Ranking from 354 Manufacturers, Suppliers and Companies | IPROS GMS

inspection Manufacturer, Suppliers and Company Rankings

inspection Product ranking