東北ウエノ List of Products and Services

This document summarizes key points for reducing costs overall through packaging materials in transportation, packaging, and logistics. By reviewing packaging materials, it is possible not only to reduce costs but also to lower environmental impact, such as CO2 reduction, and to enable the reuse of packaging materials. We have narrowed down the points to six and provided clear explanations, so if you are struggling with cost reduction, please take a moment to read it! We also offer free consultations. *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

This document summarizes the key points for achieving overall cost reduction in packaging materials within transportation, packaging, and logistics. To effectively advance cost reduction, it is necessary to focus not only on reducing the costs of packaging materials themselves but also on the efficient use of resources, transportation efficiency, storage space, and workability, all while considering environmental factors. We have narrowed down the points to six and provided clear explanations, so if you are struggling with cost reduction, please take a moment to read through it! 【Contents】 1. Efficient use of XX, minimizing XX burden 2. Protection of contents 3. XX efficiency 4. Consideration of XX properties 5. Reuse (suitable specifications for repeated use) 6. XX properties after use *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

We would like to introduce examples of packaging and packing improvements for imported products from Southeast Asia. The customer's request was, "The darts stand gets damaged during domestic transportation, which reduces its value as a product when it arrives in the country, so we want to address this issue." As the products inside the box were only secured with tape, we created new interior materials to prevent the products from moving. Additionally, since the products need to withstand stacking and will be delivered domestically via courier, we considered the size and shape of the cardboard box to meet these requirements. Furthermore, since the packaging is done in China, we selected materials that are easy to procure locally. *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

Our company provides examples of improvement proposals for existing transportation packaging and packing methods. In this case, the customer was seeking improvements in packing and packaging methods to enhance loading efficiency. Therefore, we selected HD-80 as the material. Considering workability, it can be stored by simply laying one sheet down, and it allows for packaging without contact between the products. With our proposal, we were able to improve the efficiency by approximately three times. (12 pieces per layer × 6 layers = 72 pieces → 24 pieces per layer × 10 layers = 240 pieces) 【Benefits of packing and packaging improvements】 ■ Achieved a loading efficiency of three times with a design that allows for 24 pieces per layer × 10 layers = 240 pieces ■ By selecting HD-80, the material can withstand heat, capable of enduring up to 130 degrees *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We would like to introduce a case where we made proposals for improving storage efficiency and packaging for a returnable box used for nozzle air hoses in agricultural precision equipment. The request from the customer was, "No contact between products, and a desire to pack 10 units in the specified box." The key point of our proposal was how to efficiently store the products in the specified returnable box, allowing for the packing of 10 units by alternating the arrangement. At our company, we can provide customized solutions tailored to each product. We can propose based on the size and weight of the customer's work, as well as their specific requests. If you have any products that are causing issues with transportation or handling using returnable boxes or specified boxes, please contact Tohoku Ueno. *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We would like to introduce a case of a transport and packaging cart designed and proposed by our company for automotive door frames. We received a request from a customer to store these automotive door frames near the assembly process of the automotive production line, and we proposed an efficient loading solution for the specified cart. As a result, we successfully stored 12 door frames within the limited dimensions of the cart, improving transport efficiency. In transport packaging, the key points are to "load the work efficiently" and to create a structure that "does not cause quality defects such as scratches or dirt." If you are considering improvements in packaging related to transport packaging, please contact us. *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We would like to introduce a case study on improving the loading efficiency of automotive parts returnable containers. To increase the storage rate beyond appearances, we used a 3D camera to capture images of the products. Based on that data, we examined packaging methods that would enhance loading efficiency, considering factors such as orientation and stacking methods. As a result of our proposal, we achieved a stable loading method where the products do not come into contact with each other, allowing for an increase from the previously thought limit of 5 units to 6 units based on our suggestions. If you are facing issues with returnable containers used for in-process transportation, please leave it to us, the professionals in inter-factory transportation of industrial products. 【Case Overview】 ■Product: Returnable container for automotive parts ■Size: 200mm × 110mm × 180mm *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We would like to introduce examples of packaging and packing improvements for imported products from Southeast Asia. The customer's request was, "The darts stand gets damaged during domestic transportation, which reduces its value as a product when it arrives in the country, so we want to do something about it." As the products inside the box were only secured with tape, we created new interior materials to prevent the products from moving. Additionally, since the products need to withstand stacking and will be delivered domestically via courier, we considered the size and shape of the cardboard box to meet these requirements. We also selected materials that are easy to procure locally, as the packaging will be done in China. *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

Here is an introduction to a design example of a returnable box for semi-finished products. In the case of returnable boxes, it is necessary to reflect numerous elements in the design, including storage efficiency, durability, ease of packing, and ease of retrieval. At Tohoku Ueno, we have developed a returnable box that efficiently stores and safely transports products by combining plastic cardboard and foam materials. Additionally, the cushioning material can be folded when not in use, reducing the volume during return. Our company can propose suitable returnable boxes for semi-finished products. Please feel free to consult with us. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other packaging materials

This is an introduction to a case study on the creation of a transport box designed to efficiently store fragile sheet metal products. Sheet metal products are at risk of damage not only from bending during transport but also from scratches caused by contact between products, which can lead to defective items. Typically, L-shaped sheet metal parts are wrapped in kraft paper for transport; however, this product features a key point: it combines specially designed cushioning materials with cardboard. Of course, this design ensures that the products do not interfere with each other. It is also designed for ease of packing and retrieval, allowing for easy access from the top. For inquiries regarding the packaging of sheet metal products, please contact us. *For more details, please refer to the PDF document or feel free to reach out to us.*

• Other packaging materials

Here is an example of a returnable box for LCD modules. LCD modules are very delicate products that can be damaged by even slight impacts, so typically, a large amount of cushioning material is used in returnable boxes, which often sacrifices loading efficiency. In the case of Tohoku Ueno, we can propose a returnable box that efficiently transports LCD modules of different sizes arranged within the box by combining cushioning materials and cardboard. Additionally, we can accommodate external containers ranging from TP containers to cardboard, so please feel free to contact us. *For more details, please refer to the PDF materials or feel free to reach out to us.*

• Other packaging materials

We would like to introduce a design case for packaging materials used for transporting physical and chemical equipment (cooling water circulation devices and chillers). When transporting such heavy items overseas, a design that can withstand impact and dropping is required. At Tohoku Ueno, we create packaging materials that can withstand impact from one corner, three edges, and one face, using cardboard entirely and materials that can be procured and produced in China. Our company can consistently handle everything from the design of packaging materials for large precision equipment to drop and impact testing and delivery, so please consult with us, a company with proven results, when considering overseas production and transport packaging materials. [Case Overview] ■ Product: Packaging materials for cooling water circulation devices and chillers ■ Size: W465mm × D570mm × H435mm *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We would like to introduce a case study of packaging materials for a corrugated tube cutting machine. For packaging materials used for the overseas export of long precision equipment, it is essential that the items inside do not move around during transport. Tohoku Ueno can provide a one-stop solution from design to manufacturing of packaging materials using cardboard and cushioning materials. If you are considering packaging boxes for the overseas transport of such special items, please contact us. 【Case Overview】 ■ Product: Packaging materials for a corrugated tube cutting machine ■ Size: W977mm × D223mm × H235mm ■ Lot: 1 to 2 sets *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

Here is an example of transport packaging materials for air clamps. The products to be packaged are industrial machine parts, and due to their complex shapes, the design of the packaging materials is quite challenging. At Tohoku Ueno, we can propose suitable packaging materials for such industrial products with complex shapes. Considering storage efficiency, we offer design proposals for cushioning materials that fit the products, and we create 2D drawings and perform in-house processing on behalf of our customers. [Case Overview] ■ Product: Transport packaging materials for air clamps ■ Size: W350mm × D80mm × H275mm *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We would like to introduce examples of packaging and material design for precision measurement and inspection equipment. The control equipment is in a box, and issues such as shaking during transportation can lead to problems, causing scratches and cracks, which result in quality defects. Therefore, for cases involving measurement and inspection equipment, like relay boxes, that are vulnerable to impacts and may lead to discovering failures after local transportation, we propose suitable packaging designs. At Tohoku Ueno, we can design custom packaging materials using cardboard and cushioning materials. If you are having trouble transporting delicate items, please feel free to consult us. 【Case Overview】 ■ Product: Packaging and materials for precision measurement and inspection equipment ■ Size: W650mm × D244mm × H535mm ■ Lot: 1 to 2 sets *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We would like to introduce recommended moving packaging materials from Tohoku Ueno. Our lineup includes soft mats, clean spacers, risk boxes, pallet spacers, and Minakeeper. Minakeeper is a multi-protective cover made from polyethylene, shaped into various forms using special technology, and can be used for protection during construction and moving. 【Lineup】 ■ Soft Mat ■ Clean Spacer ■ Risk Box ■ Pallet Spacer ■ Minakeeper *For more details, please refer to the PDF materials or feel free to contact us.

• Other packaging materials

We would like to introduce our recommended ESD-related packaging materials from Tohoku Ueno. The "Conductive Flooring and Table Mats" are conductive long-length flooring materials designed for heavy foot traffic, specifically the "Elefeel Floor," which is compatible with clean room Class 100. They are excellent in wear resistance and load-bearing capacity. Additionally, the "Electrostatic Shielding Bags" feature an effective shielding design against electrostatic fields, providing over 97% shielding effectiveness. We also offer "Moisture-Proof Bags" and "Anti-Static Bags." 【Product Lineup】 ■ Conductive Flooring and Table Mats ■ Electrostatic Shielding Bags ■ Moisture-Proof Bags ■ Anti-Static Bags *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

The transportation packaging material introduced this time is a product used for transporting sheet metal parts for precision equipment. We have been asked to propose efficiency improvements over conventional transportation packaging methods, and we would like to present a case study of our proposal. In the case of sheet metal parts, there are often specifications to ensure that the surface is free from scratches for aesthetic reasons. Therefore, we proposed a method of stacking the parts in a windmill arrangement with cushioning materials inserted, so that the parts do not touch each other and get scratched. As a result, we successfully accommodated four pieces in one box, which has improved transportation efficiency by up to twice compared to conventional products. [Case Overview] ■ Size: W650mm × D450mm × H400mm ■ Additional Function: Efficiency in logistics and space-saving ■ Material: Made of PP, honeycomb core material ■ Industry: Automotive parts manufacturing factory ■ Product Category: Returnable box *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We received an inquiry from a customer asking if we could design cushioning material to hold four tools in one layer. We would like to introduce a case study of the cushioning material we designed and manufactured for wire tools' transport boxes. Initially, we proposed a prototype, but we also suggested another packaging concept (2) as an alternative. Compared to concept (1), this concept (2) improves storage efficiency and enhances workability, allowing for greater overall cost reduction in logistics. At first glance, it may seem that the products being packaged could move within the transport box during transit and cause damage. However, since the strength of the work itself is high and the structure does not allow the works to collide with each other, this concern is unfounded. [Case Overview] ■ Size: W400mm × D300mm × H200mm ■ Additional Function: Streamlining logistics and saving space ■ Material: Low-foamed polyethylene sheet ■ Industry: Manufacturing ■ Product Category: Transport box *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We would like to introduce a case where we proposed improvements in quality and a 75% reduction in space within the factory by standardizing and unifying the transport carts for rack covers. In this instance, we were consulted about the occurrence of product defects during the packaging process for large thin sheet metal products, as well as the issue of occupying unnecessary space in the factory due to the diverse lineup of product sizes, which required dedicated boxes for flat placement each time. In response, we designed and proposed a unified vertical cart for racks of different sizes, along with size-different Miniform laminated products to secure the covers. As a result, work efficiency improved, quality issues were resolved, and since four sheets of thin metal can be placed on each cart, significant space savings were also achieved. 【Case Overview】 ■ Size: W2000mm × D20mm × H1000mm ■ Additional Function: Efficiency and space-saving through the unification of rack carts ■ Material: Steel (baked paint) ■ Industry: Manufacturing (sheet metal processing) ■ Product Category: Rack products *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

This is an introduction to a case study that achieved maximum storage efficiency through design from scratch. The product in this case has a complex shape, and there were no specific guidelines for packing other than using newspaper. As a result, not only was the loading efficiency per box poor, but there were also many instances of product defects due to scratches, leading to unnecessary tasks such as repainting. To address this, we utilized 3D simulation drawings to create pads that optimize both loading efficiency and workability, ensuring that the products do not interfere with each other. Until now, we have introduced cases that improved existing storage methods, but it is certainly possible to design cushioning packaging from scratch as well. [Case Overview] ■ Additional Function: Streamlining logistics and saving space ■ Material: Foam material ■ Industry: Steel / Metal ■ Product Category: Returnable boxes *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

We have developed and released a splash prevention panel called the "Reception Prevention Panel" for measures against droplet infection. It is an easy-to-install splash prevention panel that requires no screws for assembly. We encourage you to utilize this product to reduce the infection risk for government offices, companies, and factories where remote work is difficult! 【Features】 ■ The panel is made of alcohol-disinfectable PET material! ■ A clear panel that provides no discomfort during face-to-face interactions! ■ Compatible with handheld panels (up to 5mm thick)! ■ Customizable sizes to fit your usage environment. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• others

In light of the current spread of the new coronavirus, which is causing significant impact, our company is prioritizing the safety of our employees and their families, as well as our customers and other stakeholders, and is actively working to prevent the spread of infection. In response to customer requests, we have developed and launched a multipurpose droplet prevention panel. It can be assembled for use and stored flat when not in use. 【Features】 ■ Stable and collapsible shape for easy storage after use ■ Recommended for preventing droplet infection among colleagues ■ Easy to wipe and maintain ■ Available in milky white and clear colors *For more details, please refer to the PDF document or feel free to contact us.

• others

Here is an example of packaging consulting for industrial equipment parts. The key point of the proposal is that contact with the window areas is not allowed, and by suggesting a storage method that opens the four window areas, we are able to accommodate a greater quantity than desired in the specified box. This not only responds to the customer's required specifications but also considers the storage space, allowing for an increase in the number of lots transported in a single box. Additionally, due to the fragile nature of the materials, we also select packaging materials that take this into account. For electronic components, we receive requests from customers such as "it must not break" and "be careful as it is fragile," so we propose cushioning materials tailored to the work. [Key Points of the Proposal] - Storage method that opens the four window areas - Accommodating a greater quantity than desired in the specified box - Selection of packaging materials that consider the fragile nature of the materials *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

Here is a proposal for improvements to the reusable box for upper boxes. Upper boxes are packaging materials used to wrap products, and the shapes of the products are complex. Additionally, there are concerns when packaging the workpieces, as they have a surface layer and cannot be laid down during packaging. There is also a part of the surface layer on the bottom, which raises the issue of how to secure the contents inside the reusable box. Therefore, this time, we have designed a specification that secures the workpieces inside the box by using a hard material. Since the products have a left and right orientation, they are generally designated as L for left and R for right, but this time we have created a specification that can be used interchangeably for both sides. [Case Study] ■ Issues - The surface layer prevents the workpieces from being laid down during packaging. - There is a part of the surface layer on the bottom, raising the question of how to secure it inside the reusable box. ■ Improvements - By using a hard material, the workpieces are secured inside the box. - A specification that can be used interchangeably for both sides. *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

We would like to introduce a proposal case for conductive partition boards used in automotive parts. The packaging material is intended for transporting industrial products, and when we received a request from the customer, there were specifications for a designated box and a desired quantity (30 pieces). In our proposal, we made it possible to package the desired quantity in one layer (3×10), and for the strict dimensions at both ends, we designed it in a U-shape integrated with the bottom plate. Additionally, since the products have protrusions such as claws, there was initially a discussion about whether to orient those parts upwards. However, due to the desired quantity, it was difficult to package in the designated box considering dimensions and other factors. After evaluating the desired specifications and the actual packaging results, it was confirmed that vertical placement posed no issues, allowing us to reproduce the customer's request. *For more details, please refer to the PDF document or feel free to contact us.*

• Cushioning material

We would like to introduce a case study on proposals for improving the loading efficiency of automotive parts containers. To increase the storage rate beyond appearances, we used a 3D camera to photograph the products and examined packaging methods that would enhance loading efficiency based on that data, considering aspects such as orientation and stacking methods. As a result of our final proposal, we achieved a stable loading method where the products do not come into contact with each other, increasing the capacity from what the customer previously thought was limited to 5 units to 6 units due to our proposal. Additionally, we designed it so that symmetrical products can be accommodated without interference. [Case Study - After Proposal] - Increased capacity from what was previously thought to be limited to 5 units to 6 units. - Symmetrical products can now be accommodated without interference. *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

We would like to introduce a design and proposal case for a transport and packaging cart for automobile door frames. We received a request from a customer to store automobile door frames near the assembly process of the automobile production line, and we proposed an efficient loading solution for the specified cart. As a result of our proposal, we achieved transportation efficiency and successfully stored 12 door frames within the limited dimensions of the cart. Despite the lack of space within the cart, we proposed a method using fixing materials to ensure efficiency and prevent the workpieces from moving during transport. [Key Points in Transport Packaging] - Efficient loading - A structure that does not cause quality defects such as scratches or dirt *For more details, please refer to the PDF document or feel free to contact us.*

• Cushioning material

Here is an example of proposing a complete cardboard solution as the material for heavy item shipping boxes. Since it involves cardboard, there were customer concerns about "Is the durability okay?" Therefore, we conducted drop tests to guarantee and provide sufficient durability. By making design change proposals to use cardboard materials in this way, we were able to offer customers the benefits of reducing material costs while maintaining durability. Additionally, we have considered the workability in the process of wrapping the casing, allowing us to propose improvements in productivity. 【Case Overview】 ■ By application: Cushioning/Protective shipping boxes/Cart ■ By industry: Electronics/Precision equipment/Semiconductors ■ By material function: Material cost reduction/High durability ■ Classification list by packaging item name: Semiconductors/Electronic components ■ By packaging material: Cardboard ■ By purpose: To wrap/protect products *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

We would like to introduce a case study on the cushioning design of in-process trays for circuit boards. In this case, we received product data from the customer and designed the tray to fit the product shape, achieving prevention of lateral displacement during transport. Additionally, since it serves as the base for electronic components, we have incorporated reliefs on the surface to ensure that it does not come into contact with packaging materials, which is also a key point. 【Case Overview】 ■ By Application: Cushioning/Protection/Storage/Process ■ By Industry: Electronics/Precision Equipment/Semiconductors ■ By Material Function: Logistics Efficiency ■ Classification List by Packaging Name: Precision Equipment/Working Machines/Tools ■ By Packaging Material: Foam Materials/Cardboard ■ By Purpose: To Protect Products *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

We would like to introduce a case study of cushioning materials used for prisms in the optical field. Due to the inability to lend out physical products, we proposed a cushioning material design based solely on the external dimensions of the product. This time, since it is for overseas shipment rather than domestic, there were concerns about handling. Therefore, the key point was to ensure that the packaging materials had sufficient strength, using sturdy cardboard for the outer box. Additionally, we adopted double packaging that minimizes the risk of accidents from impacts or punctures without affecting the product. By conducting cushioning design, we ensured that even delicate products, such as optical components that are sensitive to shocks, can be safely shipped overseas. Even for products without physical samples, our packaging material engineers can make suitable proposals using their experience and equipment such as 3D-CAD. *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

We would like to introduce an example of cushioning design for fragile objects using high-performance cushioning materials. When transporting precision instruments that can break or malfunction from slight impacts, a design that can protect the object from various angles is required. In our case, we can achieve a design that also considers material cost reduction through the packaging technology we have accumulated over many years. If you are looking for cost-competitive transport boxes for precision instruments, please feel free to contact us. 【Example Overview】 ■ By Application: Cushioning/Protective Packaging/Grouping/Overseas Shipping ■ By Industry: Electronics/Precision Instruments/Semiconductors/Aerospace/Freight/Transport ■ By Material Function: Material Cost Reduction ■ Classification List by Packaging Name: - Precision Instruments/ Machine Tools/ Tools/ Measuring and Inspection Equipment/ Semiconductors and Electronic Components ■ By Packaging Material: Foam Materials ■ By Purpose: Protecting Products *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

We would like to introduce a case study on the improvement design of shipping boxes and cushioning materials for medical devices. We received a request to "ship medical devices of 8 different sizes using the same cushioning material." Our company proposed to design a base cushioning material that fits the largest size of the medical devices and to only change the size of the upper cushioning material used as a restraint. By using a common pad for products of 8 different sizes, we were able to reduce material costs and significantly improve work efficiency. 【Benefits】 ■ There is no need to use different cushioning materials in the box for each product size, achieving improved work efficiency and streamlining. ■ By standardizing the base cushioning material, we have reduced material costs. *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

A collection of cost reduction case studies realized from the "right material, right packaging" concept, including environmental measures, presented by packaging design professionals at Tohoku Ueno! Packed with examples of transportation packaging cost reductions for packaging designers and logistics engineers. The collection features proposals such as converting shipping boxes entirely to cardboard, achieving high durability and cost reduction, as well as examples of improving loading efficiency for automotive parts containers. [Contents] ■ Collection of cost reduction case studies related to transportation packaging - Cost reduction and cushioning design examples for electronic components and precision instruments - Cost reduction and improvement proposal examples for automotive parts *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

"ECM" can be easily returned to its original sheet form after use, allowing for collection and repeated reuse, providing convenience. The special cut shape of the thick plate processing enables a significant reduction in the amount of raw material used (below 50%), greatly contributing to resource conservation. The cushioning performance optimizes the contact area compared to using a single sheet of "Suntec Foam," helping to further improve cushioning efficiency. [Features] ■ Significant reduction in raw material usage (below 50%) ■ Achieves substantial cost reduction (30-40%) ■ Contributes to improved cushioning efficiency ■ Can be easily returned to its original sheet form after use ■ Provides convenience for collection and repeated reuse *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

This product is a molded item that does not break, chip, or scratch. It is suitable as a shipping container for precision parts and automotive components. As cushioning material, it demonstrates significant effectiveness not only for precision machinery but also for office automation equipment, audio equipment, optical products, and more. [Features] ■ Unbreakable ■ Chip-resistant ■ Scratch-resistant *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

The "P Board" is a cross-linked polypropylene sheet foam that allows for easy initial processing such as cutting, punching, and thermoforming, which were somewhat difficult before. It is composed of 100% polypropylene, giving it properties such as heat-resistant hinge characteristics and easy incinerability. Additionally, due to its high independent bubble rate, it can also be used as insulation for heat retention and cooling. 【Features】 ■ Very lightweight ■ Excellent processability ■ Moderate cushioning properties ■ Excellent oil, chemical, and water resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

"Peeblock molded products" are cross-linked polypropylene molded foams that excel in heat resistance, dimensional stability, oil resistance, and chemical resistance. While expanded polystyrene (EPS) has the drawback of being brittle and easily breakable, Peeblock (EPP) is tough and does not deform with repeated use, making it suitable for applications such as transport containers. 【Features】 - Excellent heat resistance, dimensional stability, oil resistance, and chemical resistance - Tough and does not deform with repeated use - Capable of producing high-foamed products with cushioning properties comparable to conventional molded polyethylene - Lightweight, allowing for reduced distribution costs - No toxic gases and easy to incinerate *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services

At Tohoku Ueno Co., Ltd., we handle the foam resin product "Module Supporter." Issues such as "the screen size is the same, but the thickness is different," "the thickness is the same, but the external dimensions are different," and "the size is the same, but the weight is different" can be resolved by using our product, achieving standardization of packaging materials. We offer groove widths of 10, 15, and 18 mm, and customization is also possible. 【Features】 ■ Standardization of packaging materials ■ Groove widths available: 10, 15, and 18 mm ■ Customization available *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

The "Suntech Foam TH Series" is a foam resin that eliminates the cutting and pasting process from the conventional "Suntech Foam" cushioning packaging material, thanks to its unique special skin processing technology, while also achieving significant reinforcement of the hinge area. This product offers various advantages, including reduced delivery times, substantial cuts in processing, storage, and transportation costs, as well as enhanced hinge strength to prevent tearing and separation due to impact, making it suitable not only for lightweight items but also for cushioning packaging of heavy items. 【Features】 ■ Simple design that allows for cushioning packaging material to be obtained just by setting up the hinge part on-site ■ Special skin and foam parts are made from the same material (cross-linking polyethylene) ■ Easy to recycle ■ Possible to shorten delivery times ■ Significant reduction in processing, storage, and transportation costs *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services

"Suntech Foam" is a foamed resin that promotes resource conservation and waste reduction, contributing to environmental protection. It is widely used as cushioning material for various products, from heavy items to lightweight ones, as well as for packaging in precision parts and automotive factories. Additionally, our company offers the "Suntech Foam TH Series," a simple design that allows for cushioning packaging material to be created just by setting up the hinge part at the packaging site. [Features] ■ Cushioning design aimed at reducing usage ■ Supports recycling ■ Contributes to energy consumption reduction *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

At Tohoku Ueno, which operates the transport packaging guide website, we are making proposals to improve loading efficiency and work efficiency for existing boxes (trays). We received requests from customers asking if we could propose improvements to transport and handling efficiency for existing pallets. However, through simulations, we realized that the weight of the tray itself is also an issue when storing sheet metal parts, leading us to propose changes in the material of the box (tray) as well as suggestions for improving loading efficiency. Additionally, since we traditionally stacked boxes (trays) for storage within the factory, we implemented laser welding at the corners to enhance loading efficiency and installed anti-slip components. *For more details, please refer to the external link or feel free to contact us.*

• Packaging Bags

Are you implementing JIS Z 0130 (2015) regarding environmentally considerate packaging? Packaging is not just about safely transporting goods; it requires a comprehensive consideration of environmental impact assessment. Factors such as transportation environment, transport routes, packaging sites, material warehouses, whether cushioning is necessary, and the effects of static electricity vary depending on the contents, leading to different suitable materials. Utilizing our extensive packaging case studies and various new materials developed in recent years to address environmental issues, we propose packaging specifications that consider optimal combinations for the environment and can reduce total costs. *For more details, please refer to the external link or feel free to contact us.*

• Packaging Bags

Our company offers proposals for the improvement of packaging materials and packaging for industrial products, precision instruments, and medical devices, as well as suggestions for transportation efficiency. TransportPackagingGuide.com is a specialized site that solves various issues related to the transportation packaging of different products. At Tohoku Ueno, which operates this site, we use a variety of packaging materials and provide design and manufacturing proposals for packaging materials for a wide range of components, making various suggestions for industries such as automotive, precision instruments, LCD displays, and semiconductors. 【Main Industries Served】 ■ Automotive, Semiconductors, Electronic Components ■ Precision Instruments, LCD Displays ■ Medical Devices, Medical Instruments ■ Measuring Instruments, Inspection Tools ■ Consumer Products such as Wheelchairs *For more details, please refer to the external link or feel free to contact us.

• Other contract services

Tohoku Ueno will assist you in reducing costs through packaging design. By converting the process of measuring physical items to data input, significant time savings can be achieved. Additionally, by reading actual product data, accurate cushioning design becomes possible. 【Features】 ■ Assistance in cost reduction through packaging design ■ Packaging design utilizing simulation technology ■ Faster packaging design through reverse engineering technology ■ Significant time savings possible ■ Accurate cushioning design possible *For more details, please refer to the external link or feel free to contact us.

• Circuit board design and manufacturing