北川グレステック List of Products and Services

The "Kemett Wrapping Plate" is a product that effectively utilizes "Kemett Diamond Slurry," which is a mixture of resin and metal that has been cured. It has good workability, allows for easy management of flatness, and can also accommodate grooves. Additionally, it is suitable for precise shoulder wrapping of a wide range of parts, such as fuel pump gear surfaces and pressure relief valve caps. 【Features】 ■ Firmly retains diamond particles, enabling reproducible and efficient lapping ■ Strong yet cushioned, preventing damage to the workpiece from diamond particles ■ Manufactured in various hardness levels, allowing for recommendations of plates suitable for different materials ■ Easy and appropriate control of flatness ■ Supports diameters up to 3000mm *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other processing machines

Our company conducts slurry development and manufacturing based on the experience we have cultivated since our founding. "CMP slurry" is composed of chemical solutions and nano-sized abrasive particles, characterized by minimal generation of coarse particles and good particle dispersion, ensuring stable quality. We offer "alumina," which provides excellent cleaning properties and a fast polishing rate, and "silica," which achieves damage-free results with high surface roughness. 【Features】 <Alumina> ■ Properties: Excellent cleaning properties and fast polishing rate ■ Polishing targets: Resins, compound ceramics <Silica> ■ Properties: Damage-free with high surface roughness ■ Polishing targets: Oxide films, metal film resins, glass *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

"Kemet Diamond Slurry" offers a wide range of particle sizes, concentrations, and solutions to meet the needs of the lapping and polishing process. We provide two types of slurries: "Water-based (W2)," which has excellent cleaning properties and achieves a fast processing rate, and "Oil-based (O3)," which excels in lubrication and achieves a high surface roughness. Additionally, we can also provide slurries with other particle sizes. 【Features】 <Water-based (W2)> ■ Characteristics: Excellent cleaning properties and fast processing rate ■ Polishing targets: Sapphire, SiC, SUS304, SUS316, carbon, cemented carbide, ceramics, etc. <Oil-based (O3)> ■ Characteristics: Excellent lubrication and high surface roughness ■ Polishing targets: General iron-based materials, workpieces prone to rust *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

"Kemet Diamond Compound" offers four types of diamond compounds, classified in-house to meet the needs of the lapping and polishing process. Our lineup includes the water-soluble compound "W type," which can be easily cleaned after polishing, the oil-based "OS type," and the "L type," specially developed for hard materials. Additionally, the "KD type" can be widely used in various settings such as work sites, precision machining environments, and laboratories. 【Product Lineup】 ■ W Type Diamond Compound ■ OS Type Diamond Compound ■ L Type Diamond Compound ■ KD Type Diamond Compound *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

We would like to introduce the "Light Band" that we handle. It is composed of using "optical flats" and "monochromatic light" to measure the flatness of specimens. A "Light Band" that is straight, parallel, and not too wide can be considered flat. 【Features】 ■ Composed of using "optical flats" and "monochromatic light" to measure the flatness of specimens ■ One Light Band represents a flatness of 0.00029mm ■ The surface is finished through various polishing processes ■ When considered geometrically, it can be divided into three components: roughness, waviness, and shape *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Wafer processing/polishing equipment

We offer a lineup ranging from compact models suitable for research and development to models compatible with 300mm wafers. We can also propose specification changes, custom orders, and CMP automatic devices that allow for Dry-in / Dry-out according to your needs. We have demo units available, so we can conduct demo tests in your presence. 【We can also accommodate requests such as the following】 ■ Chemical compatibility (capable of handling various acidic and alkaline slurries) ■ Support for abrasive supply systems ■ Desire to include sensors to measure vibrations ■ Wanting to apply higher loads than usual ■ Wanting to measure temperature and humidity inside the device *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

We would like to introduce our CMP/Dicing business, "STB Division." We handle a wide range of dicing processes for brittle and hard materials such as glass with a film and ceramics, as well as backside grinding (BG) and polishing (CMP) of silicon wafers, dicing processes (bevel cut, step cut), and chip sorting after wafer processing. We serve as a pipeline between manufacturers that produce semiconductor wafers and those that assemble them. 【Features】 ■ Grinding Process: Back Grinding ■ CMP Process: Polishing ■ Dicing Process: Chip Processing ■ Pellet Charge Process: Chip Transfer Processing ■ Visual Inspection Process *For more details, please refer to the related links page or feel free to contact us.

• Processing Contract

We would like to introduce our CMP/Dicing business, "MAT Division." We offer services such as "flattening," "smoothing," and "thinning (thin film)," not only in the semiconductor field but also for SiC power devices, SOI, micro-machines (MEMS), optical devices, LED sapphire, organic EL, and more. With our reliable technical expertise and experience, we respond to our customers' needs in advanced technologies such as "grinding," "lapping," "polishing," "CMP," and "cleaning." 【Features】 ■ CMP process development, prototyping, and contract processing ■ "Flattening," "smoothing," "thinning (thin film)" ■ Not limited to the semiconductor field ■ Responding to customer needs with reliable technical expertise and experience *For more details, please refer to the related link page or feel free to contact us.

• Processing Contract

The "MECATECH 334SPC" is an automatic polishing machine capable of mounting φ250 and 300mm discs with six cylinders. It is a high-spec model that allows for both central and individual loading methods. This device has been arranged based on an older model, achieving a more accessible price. For those who have found the high cost of automatic polishing machines out of reach until now, we encourage you to consider this opportunity. 【Features】 ■ Compatible with polishing discs of 250 and 300φ ■ Touch panel and other features have been updated while maintaining the ease of use of the old model ■ Supports both manual and automatic polishing ■ Guarantees suitable polishing regardless of the size or number of samples ■ Selection of models and holders tailored to your budget is also possible *For more details, please refer to the PDF materials or feel free to contact us.

• Wafer processing/polishing equipment

"Anti-Rust" is an additive that can be used to prevent rust by diluting it with coolant used in cutting equipment. The usage method is to dilute it to 5% of the coolant capacity. In addition, we also offer preservatives such as "Anti-Septic," which can be used together to prevent spoilage during the summer when bacteria are likely to proliferate, as well as a defoamer called "Anti-Foam." 【Product Lineup (Excerpt)】 ■ Anti-Rust 1L ■ Anti-Rust 5L ■ Anti-Rust 10L ■ Anti-Foam 1L ■ Anti-Septic 1L *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

"TISSEDIAM" is a consumable suitable for surface finishing of hard materials other than metals, as well as for coarse and medium grinding. It alleviates the drawback of excessive attack from grinding paper or IMAXR, which can cause chipping of the material. With diamond abrasives bonded with metal or resin, it delicately and carefully creates a polished surface. 【Features】 ■ Reduces the drawback of excessive attack that can chip the material ■ Back side is adhesive ■ Examples of materials for observation: silicon, ceramics, glass, quartz, tungsten *For more details, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing

The "Teflon Mold" is a mold suitable for use with epoxy resin and polyester resin among room temperature curing resins. Since it is a mold used with resins that have good adhesion, it becomes difficult to remove as it deteriorates, so if applying a release agent does not improve the situation, it is time to replace it. 【Lineup】 ■ Teflon Mold φ20mm ■ Teflon Mold φ25mm ■ Teflon Mold φ25.4mm ■ Teflon Mold φ30mm ■ Teflon Mold φ31.7mm ■ Teflon Mold φ38.1mm ■ Teflon Mold φ40mm ■ Teflon Mold φ50mm *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Rubber molds" are products recommended for use with acrylic resin due to their excellent heat resistance. They come in circular and square shapes, and are easy to remove after curing. We recommend the resins "KM-U," "KM-B," and "KM-CO." 【Product Lineup】 ■ Rubber Mold φ25 mm ■ Rubber Mold φ30 mm ■ Rubber Mold φ40 mm ■ Rubber Mold 55 × 30 × 25 ■ Rubber Mold 70 × 40 × 25 ■ Rubber Mold 100 × 50 × 25 *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

The "POLISHING STARTING KITS" are recommended starter kits for those who want to have everything ready for the polishing process, from rough grinding to finishing, but wish to start without spending too much money. We offer various options including the "Reflex Starting Kit," "Waterproof Sandpaper," and "Buffing Process Starting Set." It is possible to customize the kit contents according to each customer's preferences. 【Lineup (Excerpt)】 ■ Reflex Starting Kit for φ200mm ■ Reflex Starting Kit for φ250mm ■ Reflex Starting Kit for φ300mm ■ Buffing Process Starting Set (Single Crystal) ■ Buffing Process Starting Set (Multi Crystal) *For more details, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing

This document contains the polishing times and equipment parameters when using our automatic polishing machine. We introduce materials such as steel and iron from PRESI, as well as SUS and nitrided steel. The suitable process varies depending on the hardness of the material. Therefore, please refer to this as a guideline for the process. 【Contents (Excerpt)】 ■ Steel and iron materials (using IMAXR) Φ40 mm ■ Steel and iron materials (using waterproof polishing paper) Φ40 mm ■ SUS Φ40 mm ■ Nitrided steel Φ40 mm ■ Aluminum Φ40 mm *For more details, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing

"Technovit Provil" is a low-viscosity silicone resin suitable for taking impressions of complex shapes. It consists of a dispensing gun, cartridge, and mixing tube, and the resin is uniformly mixed simply by pulling the lever of the gun. The mixed resin can be directly applied to the sample. For application to small cavities or holes, precision work attachments are available. 【Features】 ■ High-precision transfer performance (< 0.1μm) - suitable for surface transfer such as etching (max. 500:1) ■ Accurately reproduces treated surfaces in three dimensions ■ Deforms moderately, allowing for accurate reproduction of complex-shaped samples ■ No work errors due to the automatic mixing system ■ Free from harmful substances ■ No heat generation during curing *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Phenolic" is a resin that is inexpensive and commonly used among thermosetting materials. It is used for observing various metal materials, including edge observation, appearance observation, hardness testing, and microstructural observation. Due to its low cost, this resin is suitable for those who need to produce large quantities. Some customers combine it with epoxy resin for their applications. 【Features】 ■ Inexpensive among thermosetting materials ■ Suitable for large-scale production ■ Can be used in combination with epoxy resin *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"LE CUBE" is a hand polishing machine with a diameter of either 200 or 250 mm. It is ideal for simple polishing applications, featuring a reliable and sturdy construction, making it suitable for laboratories, schools, and research centers. The multi-jet water spray lamp allows for adjustable water flow, supporting optimal lubrication. It cools the disc evenly. 【Features】 ■ Polishing Disc - Diameter: 200 or 250 mm - Two-direction rotation (clockwise/counterclockwise) - Two-speed settings (150 and 300 RPM) - Compatible with various types of polishing tools ■ Motor with Frequency Inverter - Powerful 180W motor - High torque - Quiet operation *For more details, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing

We handle the water-based diamond polishing agents 'Reflex LDP/LDM' manufactured by PRESI. 'Reflex LDP' is a polycrystalline diamond polishing agent with high cutting ability, which can also lead to a reduction in polishing time. It is a product that works well with hard materials. The single crystal diamond polishing agent 'Reflex LDM' is recommended for those looking for a cost advantage due to its lower price. 【Features of Reflex LDP】 ■ Polycrystalline diamond ■ High cutting ability ■ Reduces polishing time ■ Works well with hard materials ■ Recommended polishing materials: iron, SUS, ceramics *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

"KM-U" is an acrylic resin manufactured by PRESI that mixes powder and liquid and cures. If it can withstand heat, it cures quickly even among room temperature curing resins. Using the pressure device "PRESSURE VESSEL" helps with shrinkage and allows for degassing, so we recommend using them together. It is suitable for hardness testing and tissue observation, especially when you need to embed heat-resistant materials quickly. 【Features】 ■ Cures quickly among room temperature curing resins ■ Can be used with heat-resistant materials ■ Recommended equipment: PRESSURE VESSEL (pressure device) *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"KM-CO" is an acrylic resin that can be used with heat-resistant materials, mixing powder and liquid to cure. Since the main agent contains carbon, it is suitable for final observation purposes that require SEM observation or electro-polishing. There is no need for deposition, and it can be observed directly after polishing. Conductive resins are easily affected by the room temperature during mixing, so it is recommended to use the mixing ratio as a guideline to some extent. 【Features】 ■ Mixes powder and liquid to cure ■ Usable with heat-resistant materials ■ No deposition required ■ Can be observed directly after polishing ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"KM-B" is an acrylic resin that hardens by mixing powder and liquid. Acrylic resins generally cure quickly, so they are inferior to epoxy resins in terms of shrinkage, but they are suitable for those who want to cure quickly while also considering shrinkage. It is suitable for use when you need to quickly fill in materials that are resistant to heat, such as for hardness testing or tissue observation. 【Features】 ■ Mixes powder and liquid to harden ■ Can be used with heat-resistant materials ■ Resin color is blue ■ Easily removable from molds ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"KM2.0" is a disposable mold that emphasizes transparency from the side. It can be reused, reducing waste. It uses an easily removable silicone base, eliminating the risk of failure when releasing the sample. It can be used with all room-temperature curing resins. The high-precision ring allows for the sample's outer diameter to be produced to a specified dimension. 【Features】 ■ Emphasis on side transparency ■ Adoption of an easily removable silicone base ■ Silicone base is completely sealed, reusable, and reduces waste ■ High transparency of the acrylic ring ■ Easy visibility of the sample's thickness from the side *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Gel2+ Poly" is a hard material-compatible, integrated polishing agent with polycrystalline diamond lubrication. The recommended polishing materials with polycrystalline diamond are iron, SUS, and ceramics. It helps reduce the differences in usage amounts among users, thereby improving reproducibility. Additionally, we offer "Gel2+ Mono," an integrated polishing agent with single crystal diamond lubrication, recommended for those seeking cost advantages. 【Gel2+ Poly Lineup】 ■ Integrated polishing agent with polycrystalline diamond lubrication 1/4μ "24309" ■ Integrated polishing agent with polycrystalline diamond lubrication 1μ "24310" ■ Integrated polishing agent with polycrystalline diamond lubrication 3μ "24311" ■ Integrated polishing agent with polycrystalline diamond lubrication 6μ "24312" ■ Integrated polishing agent with polycrystalline diamond lubrication 9μ "24313" ■ Integrated polishing agent with polycrystalline diamond lubrication 15μ "24314" *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

Epoxy resin is considered to have very low shrinkage among thermosetting materials. This product can be used for various observations of metal materials, including edge observation, appearance observation, hardness testing, and microstructure observation. Due to its low shrinkage and the difficulty of creating gaps between the resin and the material, this resin is particularly suitable for those aiming for edge observation. 【Features】 ■ Low shrinkage ■ Difficult to create gaps between the resin and the material ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Acrylic with Copper powder" is a resin in which copper powder is mixed with thermosetting acrylic resin. Among the resins manufactured by PRESI, there are two types suitable for SEM observation and electro-polishing: "conductive phenolic resin" and this product. The difference is that the "conductive phenolic resin" contains carbon, while this product contains copper powder. Please choose based on the embedding material. 【Features】 ■ Contains copper powder ■ Suitable for SEM observation and electro-polishing ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Conductive Phenolic" is a thermosetting resin with conductivity. Since it has conductivity, you can embed it as is and observe it with SEM without any deposition. It is an ideal product for those who perform numerous SEM observations or electro-polishing in a day. 【Features】 ■ Equipped with conductivity ■ SEM observation possible without deposition ■ Made by PRESI *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Acrylic" is a thermosetting acrylic resin that can be embedded transparently. To achieve a clean embedding, it should be thoroughly cooled after applying heat. It is suitable when you want to target specific areas for polishing or when side transparency is required. 【Features】 ■ Can be embedded transparently ■ Suitable when side transparency is needed ■ Should be thoroughly cooled after applying heat ■ Manufactured by PRESI *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"ADS Poly" is an oil-based polycrystalline diamond abrasive suitable for polishing materials that are weak to water or highly corrosive. It is alcohol-based with 0% water and is used for polishing cast iron. Recommended polishing materials for polycrystalline diamonds include iron, SUS, and ceramics. In addition, we also offer the oil-based single crystal diamond abrasive "ADS Mono" and "Lubricant for ADS." 【ADS Poly Product Lineup】 ■ Oil-based polycrystalline diamond abrasive 1/4μ "20069" ■ Oil-based polycrystalline diamond abrasive 1μ "20070" ■ Oil-based polycrystalline diamond abrasive 3μ "20071" ■ Oil-based polycrystalline diamond abrasive 6μ "20072" ■ Oil-based polycrystalline diamond abrasive 9μ "20073" ■ Oil-based polycrystalline diamond abrasive 15μ "20074" *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

"2S" is a transparent polyester resin that cures quickly. Bubbles spontaneously escape even without a degasser, allowing for clean embedding. It generates heat up to around 80°C, but cures in an hour and a half at room temperature (20°C), making it the second fastest curing time after acrylic resin. It has higher transparency than acrylic, making it suitable for polishing targeted areas. [Features] - Cures transparently and quickly - Bubbles spontaneously escape without a degasser - Allows for clean embedding - Second fastest curing time after acrylic resin - Contains styrene in the hardener *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

The "LPM-15" is a tabletop polishing device (lapping machine) suitable for work sizes ranging from a few millimeters to φ140mm for lapping and polishing. It reduces the load on the workpiece with a slow start and slow stop. The base plate is replaceable, allowing for lapping/polishing that matches the finishing precision of the workpiece. We also have demo units available, and we can conduct demo tests in your presence. 【Features】 ■ Compact design with dimensions of 710×650×520mm and a weight of 85kg ■ Capable of both lapping and polishing processes ■ Suitable for mass production with small samples ■ Optional peripheral equipment (jigs for applying load, safety covers, etc.) *For more details, please request documentation or view the PDF data available for download.

• Other processing machines

This catalog includes equipment necessary for the cutting, resin embedding, and polishing processes required for cross-sectional sample analysis, such as the analysis of electronic components, plating thickness, observation of metal microstructures and crystal structures, and hardness measurement. We offer a lineup that includes the sample cutting machine "MECATOME T202," "Resinoid cutting wheels," and resin embedding equipment "MECAPRESS 3," among others. 【Contents】 ■ Cutting ■ Cutting consumables ■ Resin embedding ■ Polishing ■ Polishing consumables ■ Polishing processes, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

【Product PR】 Kemet Japan's "BC-15" is a versatile tabletop experimental device that can be widely used for CMP material development, material screening, and device development. The platen diameter is 15 inches, and the platen rotation speed ranges from 5 to 100 RPM. The maximum workpiece diameter is φ152mm. It can accommodate chip sizes up to φ6-inch wafer sizes. 【Features】 ◆ The underside of the base plate has magnets, making it easy to attach and detach. ◆ It is equipped with a touch panel. ◆ It can operate automatically; once set, you only need to press start to begin processing.

• Processing Jig

The "Diamond Pellet Ring" is a product that efficiently grinds Kemet plates, allowing for the removal of clogging and correction of flatness on Kemet plates. It features a design that allows for weights to be placed in two stages, enabling you to adjust according to the situation. Each has two M8 tapped holes, making it easier to lift when using eye bolts. 【Sizes】 ■ For 12" ・OD φ143mm ・Pellet 4mmT ■ For 15" ・OD φ178mm ・Pellet 4mmT ■ For 18" ・OD φ220mm ・Pellet 4mmT ■ For 24" ・OD φ286mm ・Pellet 4mmT ■ For 36" ・OD φ410mm ・Pellet 4mmT *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

"Kerasys LC" is a product that can be used to repair defects such as bubbles and black spots that occur during manufacturing, as well as minor damages incurred during storage, transportation, and assembly. It achieves excellent results with low material and processing costs, making the former damages nearly invisible. Additionally, we also offer "Kerasys HC," which was developed to repair defects and cracks in non-glazed parts of ceramic objects. 【Features of Kerasys LC】 ■ Low material and processing costs ■ Efficiently repairs multiple areas in a single process ■ Capable of reproducing specific colors ■ Easy to use with no prior knowledge required ■ Fast curing time ■ Color retention for 10 years and heat resistance up to 140°C *For more details, please refer to the PDF document or feel free to contact us.

• Repair Agent

"Technovit 9100" is a plastic embedding system based on MMA (methyl methacrylate). It has been specifically developed for the embedding of calcified tissues and soft tissues using an extended research spectrum under an optical microscope. It is suitable for immunohistochemical studies, including histological overview staining, enzymatic chemistry, and in-situ hybridization. 【Features】 ■ Plastic embedding system based on MMA (methyl methacrylate) ■ Developed for the embedding of calcified tissues and soft tissues ■ Suitable for immunohistochemical studies, including in-situ hybridization ■ Polymerization occurs by eliminating oxygen using a catalyst system consisting of peroxides and amines ■ Additional components such as PMMA powder and modifiers enable controlled polymerization at low temperatures (ranging from -2 to -20°C depending on volume) to ensure complete dissipation of polymerization heat *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers

"Technovit 4006 SE" is an embedding resin suitable for embedding extremely thin layers. It cures with two components: powder and liquid. Compared to Technovit 4006, it allows for a high degree of transparency in resin embedding with fewer bubbles, even without using the pressure device Technomat. 【Features】 ■ Ideal for embedding extremely thin layers ■ Cures with two components: powder and liquid ■ Resin color: transparent ■ Allows for a high degree of transparency in resin embedding with fewer bubbles *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers

This catalog introduces the resin for sample analysis manufactured by KULZER GmbH, which is handled by Kemet Japan Co., Ltd. Kulzer's Technovit is a high-quality resin product that combines high reliability with ease of use. Its range of applications is limitless, and it can be used in various fields. [Contents (excerpt)] ■Technovit 4000 ■Technovit 4004 ■Technovit 4006 ■Technovit 4006SE ■Technovit 4071 *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers

"Kemet Lubricant" is a lubricant that absorbs friction heat and evenly disperses abrasives, allowing for more efficient use of Kemet diamond abrasives. It is a low-viscosity water-based lubricant developed for KD type and W type diamond compounds, as well as a low-viscosity oil-based type, primarily used in conjunction with KD, OS, and L type diamond compounds, with a variety of options available based on features, such as "Type W" and "Type OS." 【Features (partial)】 <W2 (water-based)> ■ Developed for Kemet diamond slurry ■ Especially recommended for use with Kemet plates <K (oil-based)> ■ Developed for Kemet diamond slurry ■ Combines excellent lubrication with ease of cleaning <LS (amphoteric)> ■ Can be used with Kemet diamond compounds and diamond slurry ■ Particularly suitable when the workpiece undergoes water-based cleaning after polishing *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The "MECATECH 250/300" is a sample polishing machine that allows for high reproducibility with simple operations by accurately electronically controlling each parameter. The sweep function of the "MECATECH 300SPS" optimizes the use of consumables and improves the flatness of samples. Additionally, by increasing the number of polishable samples from 6 to 8, productivity can also be enhanced. 【Features】 ■ Allows setting of polishing load and rotation speed for each time series ■ Enables soft start and soft end for polishing ■ Supports both manual and automatic polishing ■ Provides optimal polishing regardless of the size or number of samples ■ Allows programming of grinding amount in overall load polishing ■ Controls a three-phase motor using inverter technology ■ Accurately measures and stabilizes air pressure with an electromagnetic valve *For more details, please refer to the PDF document or feel free to contact us.

• others

The "TOUCH LAM Polishing Buff" allows you to choose the most suitable polishing buff according to the type of sample and the stage of the polishing process. Starting with the natural satin cloth "2TS4," which can be used in combination with diamond abrasives of 1-6μm, we also offer "2TS5" suitable for hard to medium-hard samples, and "2TS8," which is suitable for a wide range of materials. You can select from various sizes and methods for attaching to polishing discs. 【Product Lineup (Excerpt)】 ■ 2TS4 200 φ Adhesive 5 pieces per set ■ 2TS5 200 φ Adhesive 5 pieces per set ■ Buff 4FV1 200 φ Magnet 5 pieces per set ■ Buff 2TS4 250 φ Magnet 5 pieces per set ■ Buff 2TS5 250 φ Magnet 5 pieces per set *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The "CAMEO DISK Platinum" is a diamond disc with high grinding power, serving as an alternative to SiC waterproof grinding paper. It is suitable for polishing from medium-hard to hard materials. With high durability, it can be reused multiple times and has the grinding power equivalent to hundreds of sheets of waterproof grinding paper. The grinding surface can be adjusted by sharpening it with a grinding stone. 【Features】 ■ High durability for repeated use ■ Grinding power equivalent to hundreds of sheets of waterproof grinding paper ■ Grinding surface can be adjusted by sharpening with a grinding stone *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The "CAMEO DISK Silver/Gold" is a wrapping disk with high polishing power that uses "BioDiamont Liquid" as a polishing medium. It can precisely polish materials ranging from soft to very hard. It is easy to handle, and by changing the particle size of the "BioDiamant Liquid" with just one disk, it can replace the polishing process of waterproof sandpaper from 240 to 4000 grit, making it very cost-effective. 【Material Characteristics】 ■ CAMEO DISK Silver - Polishing disk for medium to ultra-hard materials (>200 HV) - Used with BioDiamant Liquid of 12-6μm ■ CAMEO DISK Gold - Polishing disk for soft, non-ferrous materials - Used with BioDiamant Liquid of 12-3μm *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

"BioDiamant Liquid" is a high-quality lubricant-integrated abrasive that contains uniformly sized diamond particles. It comes in color-coded types (blue, green, yellow, orange, red) according to particle size, as well as uncolored MM130 and 140, and stick-type paste. It is used by dropping it at regular intervals onto CAMEO DISK Silver and Gold or polishing buffs. It can be used for both automatic and manual supply of the abrasive. 【Features】 ■ Contains uniformly sized diamond particles ■ Available in color-coded types according to particle size, uncolored types, and stick types ■ Also offers finishing abrasives containing high-purity alumina ■ Simple to use, ideal for final polishing of soft samples ■ Available in two particle sizes: 0.25μm and 0.05μm *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The "VIBROTECH 300" is an automatic sample polishing machine capable of accommodating a 305mm diameter flat plate made from high-rigidity industrial-grade materials and components. Vibratory polishing is suitable for fine polishing finishes in the ultra-finish polishing stage, particularly for EBSD (Electron Backscatter Diffraction) or AFM (Atomic Force Microscopy). Even when the operator is not present at the end of the polishing cycle, it limits the crystallization and corrosion of the polished sample's surface. 【Features】 ■ Capable of accommodating a 305mm diameter flat plate ■ Modern design with a transparent hood ■ Vibratory polishing that reveals the fine structure of samples ■ Rust prevention function that maintains sample integrity ■ Real-time adjustment of vibration frequency and amplitude *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment