Ushiyama Electric Co., Ltd. Product Lineup

◆Compatible with manual tools from various manufacturers ◆Can work anywhere with a 100V power supply ◆Low noise, energy-saving double-opening design ◆Enables crimping with a foot switch

• Other machine tools

◆The crimping jaws drive vertically, so the terminals do not roll. ◆For use, you need the tool body (NA10), foot pedal, applicator, and jaws.

• Other machine tools

◆Low noise, energy-saving type ◆Multi-variety compatible type with die exchange ◆Rapid work required for harness processing and panel wiring, etc. ◆Ideal for tasks that do not rely on manual labor for small quantities of various types.

• Other machine tools

◆ This is a pneumatic tool for various general-purpose terminals such as round terminals and Y terminals. ◆ By changing the die, it can accommodate multiple types of terminals and wire sizes, including bare terminals and insulated crimp terminals. ◆ The foot pedal has a built-in air timer.

• Other machine tools

◆Just plug in the terminal and step on the footswitch. ◆Crimping will be done in a rectangular shape. ◆Compatible with a wide range of sizes from 0.25 to 10 mm². ◆Three plates are included.

• Other machine tools

◆It can twist multiple wires at once, eliminating the need to pre-twist the ends of the wires. ◆Unlike conventional products, it does not produce wire breaks or fraying when twisted. ◆It can be used with standard household 100V power and is versatile in location. ◆It allows for clean processing and stable finishing, enabling a smooth transition to the next task. ◆It is compact and lightweight, with a safety design that prevents fingers from getting caught.

• Other machine tools

You can use existing JAM and JCT applicators. Since there is no cable transport, it is also possible to process multi-core cables and products with components. Products with a short cable length and a close distance between the grip unit and the applicator can also be processed. Set changes are easy with digital settings. Memory capable. (Strip length, crimp position, and blade penetration amount can be adjusted digitally.) Equipped with a castor vacuum.

• Other machine tools

The operation mode can be selected from either "discontinue" or "hold." Supports the setting of standard values for pulling (minimum). Registration of up to 16 different part numbers. Supports the setting of holding force and time. The wire clamp accommodates fine wires (0.05 Sq) to thick wires (5 Sq). It accurately measures the wire adhesion force of crimp terminals. The motor pulls the wire in the direction of rotation, measuring the load until the wire detaches from the terminal or breaks. The maximum measurement load can be selected from three types: 245N (25kg), 490N (50kg), and 980N (100kg).

• Other machine tools

It features a very compact and easy-to-use touch panel. A simple usability without complicated settings. It adopts a waveform acquisition method that is less affected by mechanical vibrations, allowing for stable waveforms and confirming accurate detection precision.

• Other machine tools

Fully Automatic Cutting and Polishing Equipped with a servo motor for transport, it performs cutting and polishing automatically, eliminating human error in the process. Extra Thick Wire Cutting (using Extra Thick Wire Option) It can handle extra thick electric wires from 5.5 sq to a maximum of 60 sq. It creates a clean cross-section by cutting while sucking up dust with a vacuum unit. Measurement Position Check Camera Installed By using the front and rear adjustment dial while watching the monitor, accurate positioning of the measurement location can be achieved. Vertical Cross-Section Cutting (using Vertical Cross-Section Option) Samples of vertical cross-sections can be created without hardening the resin. It accommodates sizes from 0.18 sq to 2 sq using a dedicated clamper and cutting blade.

• Other machine tools

- Digital settings for twist count are possible. It can provide stable twisting quality even with specified twist pitch. - There is no twist return compared to manual or electric screwdrivers. - It can be operated with a remote control, allowing easy work even with long twists by one person. - You can insert one or multiple strands into three chucks, making it easy to twist from two to multiple strands (3, 6, 9, 12 strands). - By setting the rotation speed, it is easy to configure coarse or tight twisting, enabling precise twist pitch. - By using a separately sold chuck (alligator clip), it is also easy to twist wires with connectors or terminals. - Various specifications, including reverse rotation, are available as options.

• Plastic processing machines (cutting and rolling)

Low noise, energy-saving type Equipped with a function to twist the core wire Can strip in two stages Can accurately rotate strip coaxial cables and special wires such as glass wires up to a maximum of 5 layers Production processes can be divided into multiple groups for storage, allowing for quick switching even for small orders Collects discarded wires and comes with a sorting waste box

• Plastic processing machines (cutting and rolling)
• Other work tools

Excellent processing capability and responsiveness Diverse strip formats: Broadly compatible with semi-strip, full-strip, and multi-layer strip. Equipped with special processing mode: Even if the core wire data (wire diameter, length, strip) within sheathed cables differs, it automatically performs sequential processing and repetitive operations. This significantly saves time on cumbersome adjustments and improves productivity. High precision and stability through unique design Parallel movement system: Adopts the principle of parallel movement for the chuck and replacement blade. It consistently maintains the height of the center, allowing for accurate processing of parallel wires, even with different wire diameters. High-precision digital control: Digital management allows for easy and smooth fine-tuning. Cost reduction and setup efficiency Multi-compatible 90-degree V-shaped replacement blade: Extremely versatile, eliminating the hassle of changing blades even when the type of wire changes. 20-set memory function: Capable of saving and recalling up to 20 sets of past processing data. This reduces setup time and minimizes material loss from test processing.

• Plastic processing machines (cutting and rolling)
• Other work tools

The SDS6-3V is a 3-axis compatible digital counter (DRO) handled by Ushiyama Electric Co., Ltd. In 2007, our company was entrusted by Hakkou Densou Co., Ltd. in Shizuoka Prefecture to act as an import agent for digital scales, and we have continued to assist with the sale of some products. As of May 2020, when Hakkou Densou Co., Ltd. ceased the sale of digital scales, our company took over the import and sales entirely to continue this business. The SDS6-3V is a compatible product that can directly replace the old model numbers "HK105-3MS and 3LS." By connecting to optical linear glass scales (such as the KA series, compatible with TTL square wave signals), it digitally displays the movement amounts of the X, Y, and Z axes of milling machines, lathes, and grinding machines in real-time. It features a large high-brightness LED display, ensuring high visibility even in processing environments. It is compatible with a wide range of machine tools, including electrical discharge machines (EDM). Equipped with abundant processing support functions such as PCD hole position calculation, tool diameter compensation, and 200 groups of zero point memory, it comes standard with a mounting bracket.

• Other measurement, recording and measuring instruments

The SDS6-2V is a digital counter (DRO) compatible with two axes, handled by Ushiyama Electric Co., Ltd. In 2007, our company was entrusted by Hakkou Densou Co., Ltd. in Shizuoka Prefecture to act as an import agent for digital scales, and we have continued to assist in the sale of some products. As Hakkou Densou Co., Ltd. ceased the sale of digital scales in May 2020, our company took over the import and sales entirely, leading to the continuation of this business. The SDS6-2V is a compatible replacement for the old model numbers "HK105-2MS, 2GS, 2LS." By connecting to optical linear glass scales (such as the KA series, compatible with TTL square wave signals), it digitally displays the movement amounts of the X and Y axes of lathes, milling machines, and grinding machines in real-time. It features a large, high-brightness LED display, ensuring excellent visibility even in processing environments. It is equipped with practical processing support functions, including PCD hole position calculation, tool diameter compensation, 200 groups of zero point memory, and registration of 200 tools. A mounting bracket is included as standard, allowing for smooth installation.

• Other measurement, recording and measuring instruments

The KA600 series is a long-type glass digital scale handled by Ushiyama Electric Co., Ltd. It offers a rich lineup with measurement lengths ranging from 1000mm to 3000mm in 100mm increments, making it widely compatible with the axes of long-stroke machine tools such as the Z-axis of large lathes and the X-axis of large milling machines. The resolution can be selected according to the application from two types: 1μm (high-resolution type) and 5μm (standard type). With a robust body measuring 30mm x 43mm, stable operation can be expected even in harsh machining environments such as heavy cutting. ◆ Before placing an order! ◆ The table movement specifications in the machine manufacturer's documentation may differ from the actual machine. Always verify the movement amount on the actual machine and order a model that fits the machine. Of course, the scale length must be longer than the table movement amount. If a scale shorter than the movement amount is installed and the table is moved to the endpoint, it will be instantly destroyed and will be excluded from warranty coverage, so please be careful. When combined with a digital counter (display unit), it contributes to improving positioning accuracy and work efficiency of large machine tools.

• Other measurement, recording and measuring instruments

The KA500 series is a slim-type glass digital scale handled by Ushiyama Electric, having been inherited from Hakkou Densou. Its compact design, with a cross-section size of just 18mm x 20mm, allows it to be easily mounted on machine tools and small lathes where installation space is limited. It offers two types of resolution: 1μm (high resolution type) and 5μm (standard type), which can be selected according to the application. The maximum measurement speed is 60m/min, providing high-speed tracking capability. ◆ Before placing an order! ◆ The table movement specifications in the machine manufacturer's documentation may differ from the actual machine. Always verify the movement amount on the actual machine and order a model that fits the machine. Of course, the scale length must be longer than the table movement amount. If a scale shorter than the movement amount is installed and the table is moved to the endpoint, it will be instantly destroyed and will no longer be covered by warranty, so please be cautious. Measurement lengths are available in 10 models ranging from 70mm to 520mm. The protection rating corresponds to IP55, ensuring stable operation even in harsh processing environments where cutting oil and dust are present. When combined with a digital counter (display unit), it contributes to the digitalization of analog machine tools and improves positioning efficiency.

• Other measurement, recording and measuring instruments

The KA300 series is a standard type glass digital scale for machine tools, handled by Ushiyama Electric after inheriting the business from Hakkou Densou. By adopting a glass scale, it achieves high precision and durability. The resolution can be selected from two types: high-resolution type (1μm) and standard type (5μm), allowing for differentiation based on application and required precision. ◆ Before placing an order! ◆ The table movement amount specified in the machine manufacturer's specifications may differ from the actual machine. Be sure to confirm the movement amount on the actual machine and order a model that fits the machine. Of course, the scale length must be longer than the table movement amount. If a scale shorter than the movement amount is installed and the table is moved to the endpoint, it will be instantly destroyed and will be excluded from warranty coverage, so please be careful. The measurement lengths range from 70mm to 1020mm in 50mm increments, accommodating various machine tools such as lathes, milling machines, and grinding machines. Mounting attachments are included as standard accessories, making installation smooth. By combining it with a digital counter (display), it significantly improves positioning accuracy during machining, contributing to enhanced work efficiency and quality.

• Other measurement, recording and measuring instruments

The SDS3-1 is a single-axis digital counter (display) for precision measurement handled by Ushiyama Electric Co., Ltd. In 2007, our company was entrusted by Hakkou Densou Co., Ltd. in Shizuoka Prefecture to act as an agent for the import of digital scales, and we have continued to assist with the sale of some products. As of May 2020, when Hakkou Densou Co., Ltd. ceased the sale of digital scales, our company took over the import and sales entirely, leading to the continuation of this business. The SDS3-1 is a compatible product that can directly replace the old model number "HK103-1S" without changing wiring or installation space. By connecting it to optical linear glass scales (such as the KA series, compatible with TTL square wave signals), it digitally displays the movement and dimensions of machine tools and measuring jigs in real-time. It features a high-brightness LED display, making the numbers easy to read even in processing environments, and it is designed to withstand harsh conditions with excellent durability and dust and water resistance. Mounting brackets and protective covers are included as standard, allowing for smooth installation.

• Other measurement, recording and measuring instruments

Easy to operate, low-cost tube cutter Automatically measures and cuts various tubes. You can set the number of pieces to be processed in advance, and an alarm will notify you when it is finished. This reduces processing time and minimizes variations. 【Features of the Tube Cutter KM-3100G】 - Compatible with multiple materials - Supports various materials including shrink tubes, silicone tubes, hoses, and copper sheets - Up to 100 processing settings can be registered Easy operation You can easily set the total length, number of pieces, and cutting speed on the digital screen.

• Plastic processing machines (cutting and rolling)
• Pipe and cable cutters

The C371G by Kodera Electronics is a fully automatic wire cutting and stripping machine that handles a wide range of wire sizes (AWG#8 to 28). It is an energy-saving, low-noise model featuring diverse processing capabilities, a 13-language display, and a heavy-gauge mode that reduces defects caused by insulation stripping debris. For more details, please download the catalog.

• Other assembly machines

The "C371G" by Kodera Electronics is a fully automatic wire cutting and stripping machine capable of processing a wide range of wire sizes, from fine to heavy-gauge wires (AWG#8 to 28). Equipped with a proprietary multi-functional processing system, it features a 13-language LCD display and a specialized "Heavy-Gauge Mode" that prevents operation failures caused by leftover insulation debris. This drastically improves both operational efficiency and processing accuracy. Furthermore, its energy-saving design and remarkably quiet operation ensure a clean, comfortable workspace, making it a high-performance model built for maximum user convenience.

• Other processing machines

● Easy attachment replacement allows for simple installation of various manufacturers' applicators. ● Both side feed and end feed can operate at the same crimping position. ● Compact, lightweight, and low noise (motor-driven using an inverter).

• Other processing machines

The bundle wire automatic supply device "CAS OP-7" prevents unwinding by holding the wire from the inside of the bundle. It can also be set up in the state of a receiving tray. A rotation sensor rotates the wire by the amount that has been unwound (supplied) from the coil. Additionally, it has a tangle sensor built in, which stops the processing of the main machine when the wire becomes tangled and cannot be supplied. Furthermore, the arm pops up, making wire replacement easy. Adjustments to the rotation speed and direction are also possible. For more details, please download the catalog.

• Other processing machines
• others

The C372G by Kodera Electronics is a fully automatic tube cutting machine compatible with corrugated and PVC tubes up to a maximum outer diameter of 38mm. Utilizing a flat-blade guillotine system alongside left and right tube holding guides, it minimizes sagging to deliver clean, straight cuts. Additionally, it uses commercially available large cutter blades for the cutting edge, making blade replacement effortless while significantly reducing running costs. It is a highly cost-effective unit that combines processing precision with economic efficiency.

• Plastic processing machines (cutting and rolling)
• Pipe and cable cutters

The semi-automatic terminal crimping machine "CCP-02" features an independent ultra-high precision crimper with the head unit of "Castagnon C511." It is equipped with a load cell in the ram section of the crimping machine, allowing for constant measurement of the crimping force for each individual terminal crimp, thanks to the crimp force monitor. It also includes a shot counter and a defect prevention feature. For more details, please download the catalog.

• Other processing machines

The "LO-3" shield loosening machine allows for easy shield loosening simply by adjusting the brush spacing to match the cable outer diameter. It offers speed control according to the form and characteristics of the shield. Additionally, it has a fan that sucks up dust generated from shield wires, such as thread winding and paper winding, keeping the work area clean. For more details, please download the catalog.

• Other processing machines

One-Touch Operation: Instantly twist individual core wires or twist multiple conductors together with simple one-touch operation. Stepless Tightness Adjustment: Twisting tightness is fully adjustable via stepless control to achieve the ideal finish for any application. Zero Tooling Changes: Requires no manual adjustments or jig replacements, even when changing wire sizes.

• Other processing machines

．Non-Circular & Irregular Cable Processing: Handles non-round and custom-shaped cables seamlessly with the optional cable guide. ．Safety-First Design: Pneumatically driven and equipped with a full safety cover featuring an automatic interlock system. ．Clean Working Environment: Includes an integrated scrap box to prevent stripped insulation debris from scattering.

• Other processing machines

The sheath stripping machine "ST-70V2" is capable of processing non-circular, deformed cables by using a cable guide. It is equipped with air drive and a full cover with an interlock function. Additionally, it comes with a waste collection box to prevent stripping debris from scattering. For more details, please download the catalog.

• Other processing machines

The sheath stripping machine "ST-120V3" is capable of processing non-circular, deformed cables by using a cable guide. It is air-driven and equipped with a full cover featuring an interlock function. Additionally, it comes with a waste collection box to prevent stripping debris from scattering. For more details, please download the catalog.

• Other processing machines

The sheath stripping machine "ST-200V5" is capable of processing non-circular, deformed cables by using a cable guide. It is air-driven and equipped with a full cover featuring an interlock function. Additionally, it comes with a waste collection box to prevent stripping debris from scattering. For more details, please download the catalog.

• Other processing machines

The sheath stripping machine "ST-300V5" is capable of processing non-circular, deformed cables by using a cable guide. It is air-driven and equipped with a full cover featuring an interlock function. Additionally, it comes with a waste collection box to prevent stripping debris from scattering. For more details, please download the catalog.

• Other processing machines

The fully automatic terminal crimping machine "C551HXG" achieves a processing speed of approximately 10,000 pieces per hour. In addition to improving machine performance, it is designed to be user-friendly, with ease of operation and simplified applicator replacement (setup work). For more details, please download the catalog.

• Other assembly machines
• Crimp Terminal

The waterproof seal automatic insertion wire stripping machine "SIS-01" is a high-performance machine that accurately strips wires after inserting waterproof seals into cut wires such as multi-core cables. It is equipped with the well-regarded disk feeder "DF-01" from the Castagnon series, allowing for speedy and stable supply of waterproof rubber. By using it in conjunction with the semi-automatic hand press "CCP-02," it can consistently perform the insertion of waterproof seals and terminal crimping. For more details, please download the catalog.

• Other processing machines

Fully automatic crimping machine equipped with two waterproof seal insertion units. It easily and quickly inserts and crimps waterproof seals, which are essential for automotive harnesses. Even when waterproof seal processing is not required, it can be switched using the operation panel's switch. For more details, please download the catalog.

• Other assembly machines

The strength measurement device "Tensile Testing Machine GP-5" is a highly versatile inspection machine ideal for measuring the tensile strength of electric wires, optical fibers, and wires. It can measure the adhesion strength between terminals and housings, as well as between electric wires and terminals, and multiple gauge types ranging from 20 to 500N can be selected. For more details, please download the catalog.

• Other measurement, recording and measuring instruments

The digital crimp height measuring device "Unigage" demonstrates its capabilities in streamlining wire harness work and improving stability. Since the measuring pressure is constant, it reduces errors caused by the operator. It offers easy operation that can be conveniently used to enhance accuracy and shorten work time. By using the optional digital mini processor, it enables all statistical calculations, including data printing, averages, maximums, minimums, and standard deviations. For more details, please download the catalog.

• Other measurement, recording and measuring instruments

The cable processing machine "Quick Stripper QST-311S" realizes labor-saving and high-quality core stripping and sheath stripping for multi-core shields and multi-core cables. It is a multifunctional cable stripper that can handle round cables, parallel wires, oval cords, simultaneous stripping of multiple cores, step stripping, slitting, and more. It can be processed efficiently with dedicated blades. It has become more compact and powerful. For more details, please download the catalog.

• Other processing machines

Positive thinking, development-oriented. A flexible processing machine. A new model that combines a waterproof seal insertion unit based on the standard machine C550SZTS of the CASTUGNON "Initial 5" series. Designed with a revolutionary compact body and the fundamental characteristics of a seal insertion machine in a simpler way. For more details, please download the catalog.

• Other assembly machines

The CASTUGNON C555S combines a waterproof seal unit with the C551S as its base. Like the C551, it features excellent basic performance and is equipped with KODERA's cutting-edge technology, including a crimp force monitor. It is an attractive super machine that easily and quickly creates products demanded by the times. For more details, please download the catalog.

• Other assembly machines

Integrated Twisting & Soldering: Equipped with the CASY-645 Automatic Wire Twister and Solder Unit. Flexible Adjustment & Simple Operation: Fully adjustable twisting and soldering settings with an intuitive interface. CHA Standard Feature: Automatically reproduces crimp height by loading saved parameters from memory—significantly reducing changeover time for high-mix, low-volume runs. Fully Equipped: Comes standard with a wire sensor collector (CN-4503B), terminal reel stand (RSB or URSB), and signal tower.

• Other assembly machines

The Castagnon series, which has gained high trust from users around the world, has added a new lineup to its flagship machine, the C551S. It is equipped with a belt roller unit that enhances wire holding power and ensures reliable wire supply. By using three blades for cutting and stripping, it significantly increases processing speed. Additionally, it features a "vacuum unit" that blows away debris generated during processing with air while simultaneously sucking it up from below. This is a new proposal from KODERA, which always leads the times. For more details, please download the catalog.

• Other assembly machines

The CASTUGNON C551S has been re-evaluated from the packaging perspective to be simple and compact. The miniaturized crimping machine is designed to be extremely simple, and despite its compact body, it demonstrates a high crimping capability of "2.5 tons." It is equipped with an automatic crimp force setting function and a crimp force monitor that graphically displays the crimping status of each terminal on an LCD screen. Its features and performance truly embody KODERA's "convergence of cutting-edge technology." By housing the terminal reel at the bottom of the body, the terminal reel replacement process has become much easier, significantly improving work efficiency. The adoption of an interactive full LCD touch panel is indeed revolutionary. Furthermore, by equipping the C551S with CHA (Crimp Height Automatic Reproduction Mechanism), height adjustments are eliminated, drastically reducing setup time. Additionally, this CHA can be optionally installed on the conventional Super Castugnon C551S to upgrade it to the C551SZ. For more details, please download the catalog.

• Other assembly machines

The "C377G" by Kodera Electronics is a heavy-duty, fully automatic wire cutting and stripping machine that boasts incredible driving power, handling everything from large 100sq (AWG#4/0) heavy-gauge cables down to 1.25sq (AWG#16) medium-fine wires. Its standout feature is an independent motor drive system for all eight feed rollers. The four pairs of rollers are designed with a double-opening mechanism, keeping the feeding alignment perfectly centered regardless of the wire thickness. This minimizes damage to the wire surfaces while delivering consistently high precision and stable processing in a true high-spec model.

• Plastic processing machines (cutting and rolling)
• Pipe and cable cutters