See Contract Services's detailed category ranking
With the professional eye using magnifying glasses and microscopes, we reliably detect dents and fine burrs. We prevent the outflow of defective products and support complaint handling after delivery.
A clear explanation of testing methods such as thermal stability tests and dust explosion tests. (Includes test videos)
Prevent sudden failures and reduce maintenance costs! AI scientifically evaluates 146 types of damage risks and guides optimal maintenance plans.
You can check the filling state of TSV/TGV, seams, and voids in the sliced images as they are on the panel!
We will respond flexibly according to your consultation!
Surface and cross-sectional observation of samples, as well as elemental analysis and mapping through X-ray analysis, can be performed.
An overwhelming inspection speed of 250 units per day and a wealth of inspection results! Suitable management of reformer tube lifespan and equipment management costs with a non-destructive testing system for all units.
Confirm that it does not belong to B. anthracis / Estimate whether it is a species that falls under BSL2 within the B. cereus group / Diarrheal toxin and emetic toxin tests.
Oxidize the sample at 165.5℃ for 24 hours! Determine the increase in viscosity ratio and acid value.
The bubble test specified in ASTM F2096 (for detecting large leaks) can be performed.
When updating the air conditioning, the existing refrigerant piping can be reused through cleaning.
Attention quality managers! Leave the troublesome raw material testing to us. We are a GMP-compliant testing organization in the Pharmaceutical Policy Division of Toyama Prefecture!
Measures to reduce the risk of food allergy onset due to transdermal sensitization! Comprehensive testing available for 27 food allergens subject to domestic labeling!
Corner weld inspection (defect detection)! Defects inside the weld can be detected!
Through simulation, derive specific solutions that will become the "next move"!
For those interested in bubble analysis!
Seal strength testing as specified in ASTM F88 can be performed.
■AI solutions proposed by image processing manufacturers ■The key to successful AI operation is to "retain traditional methods."
It is possible to measure without any issues even in environments where coolant, dust, and welding dust are present.
Conducting sampling tests for foam extinguishing agents! We will send a sampling kit from our company and carry out the tests.
If you are looking for a subcontractor for 3D measurement, 3D scanning, inspection and measurement, or if you are seeking parts procurement with quality assurance, leave it to us.
Shape observation and simple quantitative analysis using SEM-EDX.
Evaluation of dust generation from mechanical parts and various materials. Real-time counting of the total amount of generated fine particles and particle size classification. Includes an evaluation report.
This is a list of devices used for analysis, evaluation, and testing services at AITES.
Analysis can be performed on samples in various conditions thanks to our unique preprocessing technology!
Top-notch testing quality! Capable of precisely analyzing over 60 elements in aluminum alloys and magnesium alloys.
Testing to evaluate the load-bearing capacity of grease! We will determine the maximum load without seizure (acceptable value for Timken).
Evaluate the load-bearing capacity of the sample gear! Determine the initial failure load and the complete failure load.
Increase the possibility of early detection! You can learn about the risk of liver disease through a blood test.
It is possible to measure the thermal behavior of calcium oxalate monohydrate during dehydration and other processes.
We support your material evaluation by assessing the outermost surface of the material using XPS (X-ray photoelectron spectroscopy).
We will conduct evaluation tests of the pallets in accordance with the pallet testing methods specified in JIS Z 0602.
The Visual Inspection test specified in ASTM F1886 can be conducted.
Soldering processing, electrical testing, and assembly of finished products are carried out! Introduction to the electronic device assembly work process.
I specialize in the processing of the outer metal sleeve of the magnetic roller in copiers, utilizing the polishing techniques and precision cutting skills I have developed.
We manufacture and sell inspection weights for various cranes, from standard products to original items! We also offer a convenient rental system.
![P1010198[1][1].jpg](https://image.mono.ipros.com/public/product/image/1a4/2000407814/IPROS47312457466736003492.jpeg?w=280&h=280)
Shortest half-day estimate / Rockwell hardness testing machine (hardness tester) / Mitutoyo / HR-110MR
The introduction of the Keyence LM-1100 image dimension measuring device allows for even more precise measurements with a minimum half-day estimate!
The measurement of amines is possible using the IC (Ion Chromatography) method.
It is possible to evaluate the outgassing components of organic matter in a vacuum environment.
Analysis of the compositional changes on the surface of the wrap film before and after heating using TOF-SIMS.
I confirmed the blocking function of polymer melting at high temperatures!
The Raman spectrum reflects the functional groups of organic compounds! The curing reaction can be estimated to some extent.
Effective external corrosion measures carried out at minimal cost through cultivated know-how.
Inspection of small-diameter pipelines and the entire wall thickness of heating furnace tubes, which were previously impossible to inspect, is now possible! Significant advantages for pipeline inspections over 1 km! Work completed in half a day.
Detection of fine defects, scratches, and cracks is possible! Nadcap certification obtained.
Mainly targeting gear oil! By evaluating the condition of the tooth surface, we determine the failure value.
Evaluate the friction characteristics of the sample! Measurements will be taken while repeating the specified number of times.
Evaluate the load-bearing capacity of the lubricant! Determine the maximum load without seizure.
With the experience and know-how cultivated in European development sites, we respond to various needs from concept design to CAE, prototyping, and evaluation!
We will conduct diagnostics for wire rope strand breaks and shape changes, as well as inspections of overhead crane running rails, safely, quickly, and accurately!
We will conduct tests on your motors using the motor load testing bench located within Tokai Techno. (It can also be used for inverter testing.)
The simultaneous testing capacity is approximately 2000 samples! Corrosion resistance will be evaluated free of charge through salt spray testing (SST) and combined cycle testing (CCT).
We evaluate the strength of various materials and products using a tensile and compression testing machine.
Organic acid analysis will be conducted using HPLC and LC-MS/MS.
Intuitive operation and various functions realized with a touch panel!
A trial version of logistics simulation software suitable for improving and optimizing productivity in production lines and logistics sites is available for anyone to use!
Insert photo ×7,000 Analysis of the cell membrane (×100,000)! It can be seen that the cell membrane has a double structure approximately 7nm wide.
We will measure and evaluate how loud the standard floor impact is heard in the room below.
Surface free energy (mJ/m²) is expressed as the energy required to expand a surface per unit area.
Optical property evaluation according to JIS standards is possible!
*Quickly resolve issues related to blood stains (blood) on boxes and packaging materials! * We provide high-precision testing using forensic science and DNA, as well as easy-to-use testing kits.
Comprehensive testing of food allergens subject to domestic regulations. Thorough examination of the presence or absence of 8 specific ingredients and 19 equivalent items!
We have independently developed a detection technology for pork-derived gelatin! We provide food allergen testing for gelatin, which is recommended for allergen labeling.
Measurement of water vapor and gas permeability using a device that can reliably evaluate highly barrier films.
It is possible to perform 3D measurements of large and complex objects from specified standards!
Apply a voltage between the platinum electrodes and drip the electrolyte until tracking failure occurs. Evaluate at a voltage that does not cause failure with the specified number of drips.
Horizontal combustion test of foamed materials (ISO 3582, JIS K6400-6, ASTM D4986)
It is a flexible substrate effective for high-density wiring. FPC
Numerous achievements in device design support across various industries and fields! Here are examples of device design support.
The forced opening and closing mechanism allows for quick attachment and detachment of test specimens, making it ideal for conducting numerous tests with the same shape!
Adaptable to various natural environments such as salt damage, dryness, humidity, low temperatures, and high temperatures!
Samples can be stored at room temperature in a preservation solution / Easy to handle with swab type / Can collect skin microorganisms from various areas such as the face, arms, and back.
We will answer the question "Can we conduct such tests?" with various equipment and devices.
Shortest half-day estimate / Non-contact measurement devices can measure soft products such as plastics and rubber without deformation.
If you are looking for a subcontractor for image dimension measurement and inspection, or if you are seeking procurement of processed parts with quality assurance, leave it to us!
While operating the device, it is possible to extensively inspect for corrosion in piping and other areas.
Experiments can be conducted using various machines for crushing, drying, heating, cooling, mixing, granulating, surface modification, and more.
With FIB, it is possible to create cross-sections at arbitrary locations of small objects (for example, the IC contact area), targeting specific spots.
OBIRCH is a method that utilizes the change in resistance caused by the heat generated at defect locations when light is applied, to identify abnormal areas.
Measurement examples of cleaning residues using TOF-SIMS.
Cryo-processing cooling SEM: Scanning Electron Microscopy method
You can evaluate the p/n polarity and carrier concentration distribution of the SiC device's diffusion layer.
UV-Vis is a method that measures the intensity of light transmitted through a sample by irradiating the sample with light divided by wavelength, allowing for the determination of the sample's absorbance and transmittance.
Non-destructive observation and thickness distribution analysis of components is possible using X-ray CT.
Visualization of conduction paths (insulation degradation areas) within the dielectric.
Infrared spectroscopy is a method for obtaining information about molecular structure by measuring the infrared absorption due to molecular vibrations.
Here is an example comparing the analysis results of catechin standard solutions using CAD and UV detectors.
It is possible to evaluate the luminescent properties and degradation analysis of perovskite solar cells non-destructively.
Simultaneous measurement of inorganic and organic components in minute specific areas.
By combining actual measurements and simulations, detailed peak attribution is possible!
Fine cracks are easy to see! No conductive treatment is required, allowing for quick and detailed observation.