Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
256～270 item / All 2580 items
Demo units available for loan! It includes brush cleaning and fine jet cleaning.
This machine is an automatic cleaning device that precisely cleans and dries carriers and boxes stored in a basket, transporting them from the loader through each processing stage to the unloader (which also serves as the drying section). For more details, please contact us.
Customization is okay! We offer quick responses and after-sales support unique to manufacturers.
The "RCA Wafer Cleaning System" is an automatic cleaning device primarily based on the RCA cleaning method, widely adopted as a highly reliable cleaning method. With a "3-axis multi-joint clean robot" for wafer transport and "FOUP" used for loaders and unloaders, it achieves cleaning in a non-particle environment. 【Features】 ■ Quick response from estimates to customization ■ Support for our own equipment as well as other manufacturers' equipment ■ Detailed response to sudden specification changes *For more details, please download the catalog or contact us. 【Exhibition Information】 SEMICON Japan Location: Tokyo Big Sight Period: December 13-15, 2017 Booth Number: 3509, East Hall
The substrate size is up to φ12 inches! Using our unique CO2 rubber jet nozzle.
The "CO2 Spray Cleaning Device" allows for CO2 cleaning in a low dew point environment for cleaning in a vacuum environment. It uses our proprietary nozzle, the CO2 Rubber Jet Nozzle. The speed and density of solid CO2 particles can be varied, enabling us to propose optimal cleaning conditions. It can be used for particle removal on micro lenses, removal of sputter residues, and improvement of wettability. 【Features】 ■ Our proprietary nozzle: CO2 Rubber Jet Nozzle ■ Cleaning in a vacuum environment ■ Damage-free dry cleaning is possible ■ Maximum substrate size is φ12 inches ■ Handheld spray unit available for sale *For more details, please refer to the PDF document or feel free to contact us.
We will clean frames, jigs, and molds for electronic components with ultra-high pressure water!
We will clean only with water that has been pressurized to ultra-high pressure, removing hardened epoxy resin, ceramic powder, ink, adhesives, tape, etc., that are attached to SUS frames, jig plates, and molds. In particular, we will perform high-speed, high-pressure, precision cleaning on the entire surface of thin SUS plates (both sides simultaneously).
A handgun-type ultra-high-pressure washer. It won't damage delicate cleaning targets.
【Easy and Powerful Cleaner】 DynaJet: 350 Pressure 35Mpa, Water Flow 21L/min DynaJet: 350 Pressure 35Mpa, Water Flow 15L/min ◆ Both models can be used in conjunction with the dedicated hot water steam generator DynaBOX, further enhancing cleaning capability. ◆ The equipment cost is the most affordable at this pressure and flow level.
An environmentally friendly cleaning robot uses ultra-high-pressure water to detach and clean stubborn contaminants.
【Equipment Configuration】 ◆ Processing chamber (W: 600mm × L: 1400mm × H: 1000mm to W: 2160mm × L: 2620mm × H: 3000mm) ◆ Shuttle-type product transfer device and turntable-type product transfer device ◆ 6-axis articulated robot or 2-axis Cartesian robot; 3-axis NC unit ◆ Ultra-high pressure pump (100Mpa to 250Mpa) ◆ Ultra-high pressure rotating gun and ultra-high pressure accessories * Optional water treatment system and washing/drying system are also available.
Peeling epoxy resin from SUS plates for electronic components and substrate jigs using ultra-high pressure water.
The hardened epoxy resin, ink, adhesive, tape, etc. adhered to the SUS plate for jigs will be cleaned with only water. A small amount of water will be used for double-sided cleaning at ultra-high pressures ranging from 50 MPa to 250 MPa.
We will cleanly remove rubber, resin, adhesives, etc. adhered to metal using ultra-high pressure water.
We will perform peeling cleaning using only water that has been pressurized to ultra-high pressure to remove rubber, resin, adhesives, tape, etc. adhered to metals (SUS, aluminum, iron, etc.).
Powerful peeling of labels applied to tin containers using ultra-high pressure water.
This is a device for cleaning labels adhered to containers such as drums using only ultra-high-pressure water. It is compatible with materials such as iron, stainless steel, aluminum, and FRP. The processing conditions for the ultra-high-pressure water are determined by the nature, quality, and processing capacity of the contaminants, but the selection will be within the following range of conditions: Operating pressure: 30 MPa to 150 MPa Discharge flow rate: 5 L/min to 30 L/min Therefore, the pump will be selected based on these conditions. The ultra-high-pressure pump, main unit, and rotating gun are composed of robust and highly reliable equipment.
Powerfully and gently cleans! A high-quality version of the scaffolding board cleaning device that improves cleaning quality.
The "Simple Cleaner Nozomi" from World Engineering is a cleaning device specifically designed for construction scaffolding boards, capable of powerfully and gently washing them. Using a water jet, it performs strong stripping cleaning without scratching the surface of the product. The main body is made of stainless steel, ensuring excellent durability and robustness. The entire device consolidates the functions of cleaning capability (high quality and processing capacity), eliminating waste and achieving cost reduction with a minimal equipment configuration. 【Features】 ■ Affordable version with enhanced functionality ■ High-quality version with further improved cleaning quality ■ Equipment prioritizing environmental considerations ■ Labor-saving with a loading robot ■ Miniaturization of ultra-high-pressure pumps *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Ultra-high pressure water jet! A stripping cleaning machine for removing contaminants from flat surfaces.
The "Simple Cleaner Nozomi" is a stripping cleaning machine designed to remove stubborn adherents from flat surfaces. It is equipped with a super high-pressure water jet of 70 MPa. High-efficiency cleaning is possible with a high-speed rotating gun (twin rotary). The cleaning processing speed can be set within the range of 1 to 6 m/min. You can verify its performance through demonstrations at our testing facility. 【Features】 ■ Powerful jet of 70 MPa (700 kg/cm²) ■ Increased capability with a high-speed rotating gun (twin rotary) ■ Variable cleaning processing speed of 1 to 6 m/min ■ Ideal for flat plates (500 mm × 2000 mm × thickness) *For more details, please refer to the catalog or feel free to contact us.
Ultrasonic soft probes (transducers) that fit flexibly. We offer various types to match the shape of the specimen.
- Direct flaw detection from the weld bead surface - Partial flaw detection and thickness measurement of complex shapes - Flaw detection and thickness measurement in narrow areas
It is small and lightweight, making it suitable for small samples such as those in test tubes.
It generates powerful ultrasound with a maximum amplitude of 40μm, despite being compact, lightweight, and only 50W.
An ultrasonic disperser capable of generating powerful ultrasonic waves, enabling unprecedented dispersion, emulsification, stirring, and mixing.
■Achieving a maximum amplitude of 40 micrometers!! It is capable of generating powerful ultrasonic waves, enabling unprecedented dispersion, emulsification, stirring, and mixing!! ■Constant Amplitude Variable Output Circuit It automatically controls the output to ensure a constant amplitude, even in response to changes in sample load fluctuations and pressure variations. ■Titanium Alloy and Ceramic Tips The contact surfaces are made of titanium alloy to facilitate the transmission of ultrasonic waves and to provide resistance to corrosion and acids. Additionally, ceramic and stellite-coated types are also available. ■Wide Range of Optional Parts By adding optional parts, it can be used for various applications!! ■Principle When ultrasonic waves are applied to a sample, countless vacuum bubbles are generated within the sample. These bubbles are crushed and disappear in the next moment. At this time, the surrounding liquid collides, creating extremely high pressure throughout the fluid. This phenomenon is called cavitation, and the instantaneous high impact force generated by this cavitation is used for emulsification, dispersion, mixing, and crushing.
Process Autohomogenizer
● It has a built-in memory circuit, so once you set the rotation speed and operating time, it can operate with one touch under the same conditions. ● Adopts an automatic control system with a built-in IC. It quickly and automatically recovers from a decrease in rotation speed due to load fluctuations. ● Equipped with a high-output motor of 120W. ● High-speed rotation up to 18,000 rpm. ● Standard equipped with a 30-minute timer.
