Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
106～120 item / All 282 items
Achieving further performance improvements over conventional graphene! The use of a soluble type significantly expands the range of application fields!
Higher electrical conductivity and thermal conductivity than metals and graphene. Higher chemical stability (corrosion resistance) than metals.
Using our long CNTs makes it easier to form conductive networks, and the ST effect becomes more pronounced.
Our company is not currently engaged in mass production of CNT resin composite materials, but we are accepting requests for prototype development, verification experiments, joint research, joint development, and technical consulting utilizing the ST effect in CNT resin composite materials.
By simply placing a nanocomposite of nano-aluminum and carbon nanotubes in water, a large amount of hydrogen gas is generated.
By impregnating aluminum into the surface and gaps of carbon nanotubes, highly active nano-aluminum is formed. When this composite material is placed in water or hot water, the highly active nano-aluminum reacts with the water to produce hydrogen, achieving a hydrogen generation rate close to the theoretical value. Although it is a one-time reaction, it enables the generation of hydrogen gas on-site regardless of location and allows for the effective reuse of waste aluminum materials.
A cutting-edge material that protects structures flexibly with high tensile strength and overwhelming lightness.
This is a carbon fiber (CFRP) material that can be used as reinforcement and suspension materials for structures such as buildings. With the excellent material properties of carbon fiber, it can enhance strength while minimizing the burden on structures. ■Features <Incredibly lightweight> The specific gravity is about 1/5 that of steel. The weight of the material is only 14 kg for 160 m (in the case of φ9.3 mm). <High tensile strength> The tensile strength is about 8 times that of steel bars of the same diameter. Although it looks slim, it is capable of pulling a large bus with just one strand. Cabocoma strand rods are being adopted as a new material for seismic reinforcement applications and design purposes in World Heritage sites, national treasures, designated cultural properties, and factory buildings. During construction, we have received many positive comments regarding its lightness and ease of handling on site. If you would like to see the actual product, we also offer free sample requests, so please feel free to contact us.
A must-see for those struggling with miniaturizing motors! Ideal for pancake structure high-torque ultra-flat axial gap motors, etc.!
"Somaloy(R)" is a soft magnetic material made from pure iron powder that has been developed and insulated by our company. We enable innovative motor designs that are not constrained by the limitations of electromagnetic steel sheets, providing solutions to many challenges faced by our customers. 【Matching of Axial Gap Motors (Axial Flux Motors) Topology with "Somaloy(R)"】 ■ Net shaping (3D mechanical shapes that can be "unidirectionally pressed") ■ Realization of freedom in 3D magnetic circuit design ☆ Achieving compact, lightweight, and low-cost designs that were difficult with conventional electromagnetic steel sheets☆ 【Grades】 Covers from below 100Hz to 100kHz 【Examples of Advantages for Electric Motors】 Reduces dimensions and weight by up to 60% ☆ Technical design support for axial gap motors is also underway☆ ・ 3D magnetic circuit analysis using JMAG ・ 3D CAD modeling ・ Optimization using Mode Frontier ・ Winding design ・ Strength analysis We will design according to your requirements. Please feel free to contact us. ★ Catalogs for axial gap motors using "Somaloy(R)" are currently being distributed ★
Achieving alloy-level low loss with pure iron-based powder!
"Somaloy(R)" is a soft magnetic material made of pure iron powder with an insulating coating, developed by our company ahead of the world. [Main Needs for Automotive Reactors] - Low cost - Low loss - Miniaturization [Features and Benefits of Somaloy] - Each particle of pure iron base powder is coated with an insulating layer, significantly reducing eddy current loss in the high-frequency range. - Being based on pure iron, it achieves high compressibility and easy handling, resulting in improved manufacturing efficiency. [Suitable Application Examples] - Boost reactors for DC/DC converters There is a proven track record of mass production of automotive boost reactors using "Somaloy(R)"! ★ We are currently offering the "Somaloy(R)" catalog without exception! ★ If you have any questions, please feel free to contact us♪
Soft magnetic material with an insulating coating applied to pure iron powder! Achieving high frequency (miniaturization) by reducing eddy current losses! ☆ Easy molding of complex shapes ☆
"Somaloy(R)" is a soft magnetic material made of pure iron powder with an insulating coating, developed by our company as a world first. It enables the manufacturing of cores with three-dimensional shapes and three-dimensional magnetic properties through mold forming. It is particularly useful for the development and manufacturing of high-spec soft magnetic cores required for miniaturization and high output in applications such as electric vehicles. 【Features】 - High compressibility allows for high permeability. - Enables three-dimensional magnetic circuit design, achieving miniaturization, lightweight, and cost reduction of products. - An insulating coating on pure iron powder results in low eddy current loss characteristics, achieving high efficiency in high-frequency ranges! - Complex shapes can be formed without secondary processing through net shaping (three-dimensional mechanical shapes that can be formed with uniaxial pressure). 【Grades】 - We offer a range of products covering frequencies from 100Hz for motor applications to up to 100kHz for reactor applications. ★ A catalog of "Somaloy(R)" is available for download via the button below.
![[Under Development] Soft Magnetic Composite Material 'Somaloy(R)' for Passive Applications](https://image.mono.ipros.com/public/product/image/2001550420/IPROS3325201003067334943.jpg?w=280&h=280)
SMC material with Low iron loss at high frequency and high heat resistance! The development 'Somaloy(R)' product data sheet for the passive use is available for free for a limited time!
Somaloy(R), a soft magnetic composite material (SMC), is used not only for motor applications but also in passive products such as reactors. For SMC materials intended for passive applications, we are developing a hybrid material that mixes pure iron powder with alloy powder in response to the increasing demand for high-frequency compatibility. By using the hybrid material, we are reducing iron losses in the high-frequency range. For the insulation coating, new "7P" coating is applied, achieving high heat resistance. We will be temporarily releasing some development product data sheets, so please utilize them for new product development. (The soft magnetic composite material 'Somaloy(R)' is our trademark.) ■Overview - Somaloy(R) is an SMC material with an insulation coating applied to iron powder. - By mixing pure iron powder with alloy powder, we reduce iron losses in the high-frequency range compared to pure iron powder. - By applying a new 7P coating to the insulation coating, we achieve higher heat resistance than before. From November 2025 to the end of January 2026, we will offer a limited-time free download of some development material data sheets along with existing grade introduction materials.
Optimal thermal management solutions for advanced applications requiring high reliability and high performance.
Spectramat is a leading manufacturer of heat spreaders (LEC). Heat spreaders provide thermal management solutions for cutting-edge applications that require high reliability and high performance. Spectramat applies its 45 years of expertise in heat-resistant material technology to meet the most demanding requirements in microelectronics, optoelectronics, solar cells, power electronics, aerospace, defense, and the medical industry.
It can be molded into corners and complex shapes, allowing for time savings and reduced labor costs! There is a wide variety of thicknesses available.
"Robicoar" is a composite material made of a core material with good shape conformity and chopped strand mat. The core material is made of non-woven fabric composed of thick diameter synthetic fibers, sandwiched with chopped strand glass (without using chemical binders) and sewn together with thread. The extensive lineup can accommodate any closed mold forming method and contributes to improved productivity. It can provide sufficient strength in all areas without exception, making it possible to create any type of part. 【Features】 ■ Can be molded into corners and complex shapes, allowing for time savings and reduced labor ■ Available in a wide variety of thicknesses, requiring only a single layer ■ High core resilience and compressibility, adaptable to parts of any thickness ■ Chopped strands are evenly distributed, resulting in excellent appearance of molded products ■ Good wettability without using chemical binders in the mat, allowing for quick impregnation *For more details, please refer to the PDF document or feel free to contact us.
![[Examples of Diffusion Bonding Adaptation] Low Thermal Expansion High Thermal Conductivity Materials](https://image.mono.ipros.com/public/product/image/833/2000583825/IPROS56674564666295843474.png?w=280&h=280)
Constructed with a core and core plate! Introducing a composite material that achieves both thermal conductivity and low thermal expansion rate.
We would like to introduce an example of diffusion bonding application for our "low thermal expansion high thermal conductivity material." It consists of a columnar body that facilitates heat transfer in the direction perpendicular to the surface, and a plate that suppresses the thermal expansion coefficient in the plane. The thermal conductivity is approximately 280 W/mK, and the in-plane thermal expansion coefficient is 5 to 10 ppm/K, making it a composite material that balances thermal conductivity and low thermal expansion. 【Features】 ■ Thermal conductivity: Approximately 280 W/mK ■ In-plane thermal expansion coefficient: 5 to 10 ppm/K ■ A composite material that balances thermal conductivity and low thermal expansion ■ Composed of a core and core plate *For more details, please refer to the PDF document or feel free to contact us.
The industry's first pseudo-isotropic super high thermal conductivity composite material with 1700 W/mk that can control heat transfer in all directions: X-Y-Z!
CompoLloid CC is a composite product made from carbon composites, allowing for size increase by bonding high thermal conductivity graphite, which serves as the core substrate. There are two types of products: large-area vertical (Z-direction) high thermal conductivity graphite plates and pseudo-isotropic thermal conductivity graphite plate products that can conduct heat in all directions (X-Y-Z). It is also possible to create double composite products such as gold plating or copper plate bonding. We will solve the problems of customers who have issues with anisotropy. Please let us know your size and shape requirements.
Achieving ultimate low resistance! Aluminum foil with carbon particles fixed without a binder.
"Toyal Carbo" is an original product that successfully adheres carbon particles to the surface of aluminum foil without the presence of organic binders (adhesives) by applying a unique whisker generation technology. When used in the electrodes of capacitors, which are its main application, it achieves extremely low resistance and high capacitance. [Features] - Fixes carbon particles to the foil surface without a binder → Reduces electrical resistance - Excellent heat resistance → Maintains adhesion and bonding strength even at high temperatures *For more details, please refer to the catalog, and feel free to contact us.
Half the thickness with 8 times the capacitance! Aluminum foil with organic binder-free titanium dioxide (TiO2) particles adhered.
"Toyal Titan" is an original product that successfully applies unique whisker generation technology to adhere titania particles to the surface of aluminum foil without the presence of an organic binder (adhesive). When used as electrodes in capacitors, its main application, it can achieve higher capacitance compared to conventional etched foils. 【Features】 ■ Nano-scale titania particles fixed to the foil surface without a binder → Increased surface area of titania particles leads to higher capacitance ■ Excellent water resistance → Maintains high capacitance even after long immersion in pure water at 100°C *For more details, please refer to the catalog or feel free to contact us.
![[English Market Research Report] Global Market for Composite Materials in Railways](https://image.mono.ipros.com/public/product/image/f37/2001182932/IPROS7824233074633297329.png?w=280&h=280)
"Free samples" are currently being offered! Please check the application method from the [PDF download] button or apply directly from the related links.
The market size for railway composite materials is expected to expand at a CAGR of 7.2% during the forecast period, growing from 1.7 billion USD in 2023 to 2.4 billion USD by 2028. This report investigates the global railway composite materials market, summarizing trends by fiber type, resin type, manufacturing process, application, and region, as well as profiles of companies entering the market.
