Processing Equipment Product List and Ranking from 947 Manufacturers, Suppliers and Companies | IPROS GMS

Continuous turbid water treatment device "Seahorse" is easy to maintain and only requires rinsing with water!

Equipped with multiple medication injection ports, it can handle various types of turbid water! Introducing a continuous turbid water treatment device that allows for the injection of a fixed amount of powder through a mix unit!

The continuous turbidity water treatment device "Sea Horse" is designed to process large amounts of turbid water in a short time. It is equipped with multiple chemical injection ports to accommodate various types of turbid water. Maintenance after use is simple and requires only a quick rinse with water. Made from corrosion-resistant stainless steel, its unique body shape and installation method allow for easy storage and setup. 【Features】 ■ Processes large amounts of turbid water in a short time ■ Equipped with multiple chemical injection ports to accommodate various types of turbid water ■ Maintenance after use is simple and requires only a quick rinse with water ■ Made from corrosion-resistant stainless steel ■ Easy to store and install *For more details, please refer to the PDF document or feel free to contact us.

[Case Study] Gas containing tar and resin from an appliance manufacturing factory 1

Introduction of a bio deodorizer for exhaust gases from the paint drying oven.

The concentration of formaldehyde that is carcinogenic is said to be detectable at 0.8 ppm, and at 20.0 ppm, it can cause irritation deep in the respiratory tract, potentially leading to breathing difficulties. In this case, the concentration of formaldehyde in the raw gas was extremely high at 200 to 300 ppm, posing a significant health risk to nearby residents and workers. After primary treatment with a biodenitrifier, the concentration was reduced to 2 ppm, allowing for exhaust without the need for a secondary treatment system, and there were no complaints from the neighbors. Since tar substances are also decomposed, there was no adhesion to the pit walls, which helped keep running costs down and was very well received. For more details, please contact us or refer to the catalog.

AIS Transformation System

Further expanding the possibilities of wastewater treatment! An aeration pipe system that achieves suitable treatment flows in various facilities.

AIS is a wastewater treatment technology that performs "crushing, stirring, and aeration" using a special aeration device called Aqua Blaster, promoting "complete aerobic respiration metabolism" in high-performance bacteria, thereby eliminating the need for sludge treatment and achieving zero hydrogen sulfide. In the "AIS Transform System," the treatment methods and order for each tank can be freely interchanged, allowing for a treatment flow that is suitable for each facility. This system simultaneously resolves various wastewater issues while significantly reducing costs. 【Features】 ■ The treatment methods and order for each tank can be freely interchanged. ■ It can be installed at a low cost with simple foundation and piping work. ■ Oil and grease can be decomposed by this system before being directed to the purification tank. ■ It can be used for pre-treatment or post-treatment of existing treatment facilities. ■ It can be used for purification or filtration in closed water areas. *For more details, please refer to the PDF materials or feel free to contact us.

Purification of grease traps using a vent pipe.

Reduction of pest control costs and compliance with HACCP! Prevents deterioration of public sewer systems and the occurrence of unpleasant odors.

Our company provides solutions to suppress the unpleasant odors from grease traps, ensuring a clean environment and cost reduction. The purpose of the "Grease Separator" system is to eliminate the hassle of cleaning and prevent the occurrence of pests. It also prevents a decrease in pH, thereby avoiding the deterioration of public sewer systems and odor issues. At a food service center where it has been implemented, we received feedback stating, "The odors have disappeared, and cleaning has become very easy." This success led to our installation at two other food service centers in the same prefecture. 【System Objectives】 ■ Prevent unpleasant odors ■ Reduce cleaning efforts ■ Prevent the occurrence of pests ■ Prevent a decrease in pH *For more details, please refer to the PDF materials or feel free to contact us.

Purification of circulating water in shower testers using a dispersing pipe.

There are examples of cost reductions exceeding 5 million yen per year! The water tank, which was black with oil, will be transformed.

Our company provides "purification of shower tester circulating water." It prevents the deterioration of circulating water and can significantly reduce cleaning costs and other expenses. It eliminates foul odors and unpleasant smells. Shower nozzles become less prone to clogging, making it easier to remove water stains from the body and clean the strainer. 【Effects】 ■ The lifespan of circulating water is extended. ■ Cleaning costs can be significantly reduced. ■ Foul odors and unpleasant smells are eliminated. ■ Removing water stains from the body becomes easier. ■ Shower nozzles are less likely to clog. ■ Cleaning the strainer becomes easier. *For more details, please refer to the PDF document or feel free to contact us.

Exhaust gas treatment of the drying furnace

By forming a water film, we can reliably capture resin and tar! We are lending out experimental equipment.

The exhaust gas treatment for drying furnaces can efficiently and cost-effectively capture gases emitted from various drying furnaces. The filter is cartridge-type and can be easily replaced. With the built-in Aqua Blaster, the system prevents the circulating water in the tank from decaying. We offer rental of experimental equipment, allowing you to verify the effectiveness on-site. 【Features】 ■ Forms a water film to reliably capture tar and resin ■ A system that prevents the circulating water in the tank from decaying (with built-in Aqua Blaster) ■ The filter is cartridge-type and can be easily replaced (filter dimensions: 500×500×40) *For more details, please refer to the PDF document or feel free to contact us.

[Information] Reduce hydrogen sulfide in the building pit to zero.

Introducing content aimed at reducing costs while simultaneously suppressing the generation of hydrogen sulfide!

This document provides suggestions for reducing hydrogen sulfide levels in building pits to zero. It includes information on the decay mechanisms of building pits, the dangers of hydrogen sulfide, and the equipment configuration and responsibilities of the system. Regarding the shortening of sewer pipe lifespan due to hydrogen sulfide, we introduce the differences in the service life of sewer pipes based on varying concentrations of hydrogen sulfide. [Contents] ■ Current status of building pits ■ Decay mechanisms of building pits ■ Actual site conditions ■ Shortening of sewer pipe lifespan due to hydrogen sulfide ■ Dangers of hydrogen sulfide *For more details, please refer to the PDF document or feel free to contact us.

Treatment of wastewater containing mineral oil

Improvement of the working environment! We have introduced a processing system that enables cost reduction and CO2 reduction!

We would like to introduce the treatment of wastewater containing mineral oils from car washes, buses, and trains. In maintenance facilities and businesses that perform car washes for automobiles and railways, wastewater mixed with mineral oils inevitably occurs, leading to significant labor and cost for its treatment. Additionally, oil sludge collection by industrial waste contractors was conducted three times a year, but even after 2 years and 6 months since the installation of the "Aeration Pipe Aqua Blaster," this operation has not been performed even once. [Features] ■ Significant reduction in cleaning costs ■ Reduction of CO2 through waste volume reduction ■ Reduction in water usage ■ Reduction in labor costs ■ Improvement of working environment ■ Advantageous for CSR and ISO *For more details, please refer to the PDF document or feel free to contact us.

Data: Wastewater that is difficult to treat biologically.

We are introducing wastewater that can only be processed by Aqua Blaster and wastewater that is difficult to treat biologically!

The "Aqua Blaster" is significantly different from other aeration devices, as it can finely crush organic substances such as SS and oil, allowing for "complete aerobic respiration metabolism" through microbubbles. It is a device that maximally promotes biological treatment. Therefore, it becomes difficult to treat wastewater that contains substances that cannot be consumed by living organisms. This document introduces wastewater that is challenging for biological treatment. Please take a look at the related catalog. [Contents] ■ The Basics of Aqua Blaster: Biological Treatment ■ Wastewater Difficult for Biological Treatment Part 1 ■ Wastewater Difficult for Biological Treatment Part 2 ■ Wastewater Difficult for Biological Treatment Part 3 ■ Wastewater That Can Only Be Treated by Aqua Blaster *For more details, please refer to the PDF document or feel free to contact us.

Technical Data: Air Diffuser Aqua Blaster

Aerobic microorganisms can exert their maximum decomposition power! Odorous components such as hydrogen sulfide and fatty acids do not occur.

This document is a technical material for the aeration pipe "Aqua Blaster." It includes information on "Basic Structure," "AL Type Oxygen Dissolution Efficiency," "Performance Comparison Table," and "Power Consumption Comparison." The "Hydrogen Sulfide Gas Generation Comparison" is explained using photographs. We encourage you to read it. 【Contents】 ■ Basic Structure ■ AL Type Oxygen Dissolution Efficiency ■ Performance Comparison Table ■ Power Consumption Comparison ■ Hydrogen Sulfide Gas Generation Comparison ■ AL Type Installation Examples / AS Type Installation Examples *For more details, please refer to the PDF document or feel free to contact us.

Measures for odor complaints, clearing emission standards, etc. - Rubber product processing factory

The neighborhood complaint was resolved with just one processing.

During the vulcanization process of rubber product manufacturing, exhaust gas mixed with dust and organic solvents was generated, leading to complaints from nearby residents. There were concerns that secondary treatment might be necessary, but the complaints from the neighbors were resolved with just primary treatment.

[Emission standard clearance, etc.] Community wastewater and sewage treatment exhaust gas

Successfully maintained performance from an ammonia gas concentration of 100 ppm to below 1 ppm!

When drying sludge generated from community wastewater treatment facilities in a drum to produce compost pellets, mainly ammonia-based exhaust gases are emitted. It is cleaned using one unit of the deodorizer DR-2W (made of PVC) and a dilute sulfuric acid drip system. While maintaining a pH close to neutral, it maintains performance with ammonia gas concentration reduced from 100 ppm to below 1 ppm.

[Application Note] Simplifying Complex Protocols with Automatic Dispensers

Automation of H3K27Me3 cell assays with Fluent.

Cisbio EPIgeneous cell-based assays allow for the direct measurement of methylation, demethylation, and total protein in both adherent and suspended cells. Tecan has achieved automation using the Fluent dispensing system, which is built based on the specific needs of lab applications. Fluent provides greater capacity and speed. This platform offers excellent throughput and walkaway time, enabling more reliable results and making it easier to perform many experimental processes. Tecan, in combination with Cisbio, known for its HTRF technology, has developed new protocols by combining expertise in automated liquid handling, detection, and cell-based assays. This enables the execution of fast, reliable, and fully automated assays.

Noise Index Analyzer 10MHz to 50GHz maximum 3986

Widely available for research and development, manufacturing, testing, and technical assurance testing of electronic devices such as radar, communication, and navigation.

The 3986 series noise figure analyzers include the 3986A, 3986D, 3986E, 3986F, and 3986H. Features of this product include a wide frequency range, high sensitivity reception, an easy-to-use user interface, dual-channel HD display, various external interfaces, and dual noise source drives. It supports automatic measurement of noise figures for amplifiers, upconverters, downconverters, and multi-stage frequency receiving links. The guide interface is intuitive for setting measurement modes. The comprehensive loss compensation feature can compensate for losses occurring in channels before and after measurements using fixed format or Excel format. The internal noise figure measurement uncertainty calculator performs quantitative analysis of the uncertainty in noise figure measurements. The limit line function, which provides pass/fail notifications for tests, simplifies the decision-making process for pass/fail tests. User-friendly features make it easy for engineering technicians to correctly set measurement values and observe and save measurement results in various formats.

PXI Express chassis 18 slots

High-performance 18-slot PXI Express chassis equipped with PCI Express 3.0 technology.

The PXC1191 is a high-performance 18-slot PXI Express chassis equipped with PCI Express 3.0 technology. It achieves a system bandwidth of 24GB/s, making it ideal for high-throughput point-to-point data transfer applications. All peripheral slots support a bandwidth of up to 8GB/s. Additionally, the chassis provides a total power supply of 1170W and features cooling capabilities of 50W/82W per slot, offering a high power budget for high-performance PXI modules. The timing and synchronization features of PXI Express provide high clock accuracy along with external clock and trigger routing capabilities. The PXC1191 is equipped with an intelligent monitoring system that tracks and reports the status of the chassis, including fan speed, system voltage, and internal temperature. Remote monitoring and control are possible via an Ethernet port.

99% removal of VOCs! Exhaust treatment technology 'FP method'

High-efficiency recovery of VOCs such as toluene and xylene! Ideal for odor control! Unique technology from Ruki Engineering.

The "FP Method" is our unique exhaust treatment technology that adsorbs and removes VOCs by attaching powdered activated carbon to a filter, allowing VOCs exhaust to pass through it. 【Features of the FP Method】 ◎ High-efficiency use of activated carbon Using powdered activated carbon significantly improves adsorption speed and capacity compared to granular forms. ◎ Compact The adsorption section is compact and space-saving compared to honeycomb rotors. ◎ Extremely low VOCs exhaust concentration VOCs removal efficiency of 99% (compared to a conventional maximum of 95%). ◎ No generation of NOx or SOx Unlike combustion methods, operation is powered by electricity, resulting in no generation of NOx or SOx. ◎ Filters that are resistant to clogging Our uniquely developed pleated filter has a high precision of 0.15μm × 99.95% PAO, allowing for surface filtration and reducing the likelihood of deep clogging. ◎ Reduced maintenance effort No need for HEPA filters or pre-filters. Filter maintenance (automatic regeneration of powdered activated carbon, automatic dusting and attachment) is achieved through air pulses. Filters can be used for long periods (replacement every 6 years), and consumables require only a few annual replacements of powdered activated carbon. ◎ CO2 emissions are approximately one-third of conventional types. ◎ Annual operating costs are low, approximately one-third of conventional types.

ECO Clean for Overflow Prevention in Factory Sedimentation Ponds and Enhancement of Rainy Season Processing Capacity

Rental is available only when necessary! [Awarded the Invention Grand Prize & Excellent Environmental Device Award] ECO Clean is a high-precision water treatment device using membrane filtration (MF area).

In recent years, it has become common to experience linear precipitation zones and unexpected heavy rainfall from summer to autumn. As a result, measures to prevent overflow in all types of sedimentation tanks, such as final settling ponds for sewage and activated sludge treatment, are being sought. ＼＼Right away, do you have any of these concerns? ／／ - Worried about overflow in the factory's settling pond due to sudden heavy rain... - Is it possible to temporarily increase processing capacity only during periods of high rainfall?... - Can overflow prevention measures be implemented at a low cost?... ＼Features of ECO Clean／ ■ Effective in preventing the external outflow of turbid water and in measures to prevent pollution of rivers and irrigation channels! ■ Detects the water level in the settling pond with a level sensor and automatically adjusts the processing amount. ■ Capable of handling a maximum flow rate of 400 LMH. ■ Purifies industrial water and river water to drinking water quality levels. ■ Compared to conventional MF (hollow fiber and flat membrane), it has a flow rate per unit area that is 10 times higher and an allowable SS (suspended solids) concentration that is 10 times higher. ■ Compared to coagulation sedimentation devices and sand filtration devices, it reduces chemical usage by 90% and installation space by about 90%. ■ Equipped with a unique automatic regeneration device for clogging, enabling fully automated operation. ■ Total support from inquiry to installation work.

Information about the exhibited products at the International Powder Technology Exhibition Tokyo 2022.

We will showcase water treatment equipment that challenges the "recycling of waste liquid," starting with the latest technology "ECO Clean LFP."

Our company will exhibit at the "International Powder Technology Exhibition Tokyo 2022," which will be held at Tokyo Big Sight from December 7 (Wednesday) to December 9 (Friday), 2022. This exhibition is a comprehensive showcase of the latest information on powder technology, focusing on powder equipment and devices. As an environmental solutions and engineering manufacturer, we will display water treatment equipment, including "filtration devices," and we will also unveil new products.

地下水・水道水レベルから工場排水まで、PFAS対策の最適解へ

Polymer Dissolution Device "PAD-Q Type/PAD-C Type"

Automate tedious tasks! Introducing a polymer dissolution device that also leads to reduced labor costs.

The "PAD-Q type/PAD-C type" is a polymer dissolution device capable of supplying powder accurately. The "PAD-Q type" comes standard with a powder sensor that can detect powder-related issues in advance. The "PAD-C type" is a lower-priced model. 【Features】 <PAD-Q type> ■ High-precision flow proportional type ■ Equipped with a pulse output flow meter, it can supply powder accurately even with flow variations ■ Standard equipped with a powder sensor ■ Can detect powder-related issues in advance *For more details, please refer to the PDF document or feel free to contact us.

Seez [Portable Filling Machine] CTH 'High Performance at Low Price!'

Tube cleaning takes just 3 minutes! A compact and easy-to-use portable filling machine!

The CTH series filling machine easily fills a set amount of any substance. It is the most convenient, low-cost, and high-performance new portable filling machine. 【Features】 ■ Compact and lightweight! Easy to carry with one hand! ■ Simple tube cleaning! Cleaning time is just 3 minutes! ■ Capable of filling small volumes! (Filling amount: 1g to 300g per use) *For more details, please contact us or download the catalog to view.

Large FRP Tank for Chemical Products [Case Study 01]

50 liters to 50,000 liters! It is highly resistant to chemicals, has excellent corrosion resistance, and is minimally affected by various chemical agents such as acids and alkalis, making it very durable.

If you are looking for weather resistance, heat resistance, and chemical resistance, then an FRP tank is the solution. ■ Reasons It can accommodate strong acids, strong alkalis, pure water specifications, and various other applications. ■ Basic Information ● Available in a wide range of sizes in an open round type ● ■ Excellent rigidity due to a three-layer foam structure and reinforcement frame ■ Suitable for various applications from 50L to 20,000L ■ Standard Accessories - Chemical inlet (with lid) - Level gauge - Drain outlet (without valve) - Pump stand - Lifting hook ■ Options - Stirring machine stand - Level gauge mount - Various flanges for liquid inlets *Installation may not be possible depending on flange diameter. *Allowable specific gravity: 1.2 *Max temperature: 80℃ *For more details, please request documentation or contact us.

Drip prevention during filling: "Pitatt Valve" PS Series

It is easy to install by simply inserting it into the nozzle, preventing liquid drips during filling. For contamination prevention in food factories and pharmaceutical factories, the type with iron powder is recommended.

Rich variety of sizes Easy maintenance with short cleaning time Simple attachment by just inserting into the nozzle Can be used as a catch valve for acids, alkalis, and various piping Holds a wide range of fillers from food to solvents securely.

Case Study Collection of the Magnetic Water Activation Device "Muzatsu"

Free distribution of case studies on measures against rust, scale, slime, and algae in cooling towers.

We have created a collection of case studies that allows everyone struggling with water issues (rust, water stains, bacteria, algae) to visually confirm the effects of magnetic activated water. Muzo has met the criteria for effective utilization of magnetic activated water recognized by industry, academia, and government.

Verification results of the magnetic water activation device "Muzatsu" at the research institution.

I believe that it is urgent to conduct various verifications of the effectiveness of magnetic activated water at university research institutions.

Since February 2007, our company has been conducting joint experiments with Professor Y's laboratory at T University to verify the effectiveness of "Muzatsu." The first round of experimental results was released in May, and we plan to present them at a conference next spring. According to the researchers, it is a dramatic change. This researcher is an expert in thermal fluid engineering and is also a member of the Japan Atomic Energy Commission. The design of "Muzatsu" is the most ideal from a fluid dynamics perspective, and we would like to conduct experiments and verifications from various viewpoints, not only from a mechanical standpoint but also from medical and agricultural perspectives, among others. I am very excited and looking forward to it. (Comment from Researcher Y)

[Use Case Examples] Magnetic Water Activation Device "Muzatsu"

From factories to hotels and hospitals. A photo-illustrated explanation of examples of pharmaceuticals, cost reduction, and energy savings.

A groundbreaking water treatment device, "Muzai," that fundamentally solves various water issues. We will introduce the effects of "Muzai" by application! For more details, please refer to the basic information or catalog.

Magnetic Water Activation Device Case Study Collection Giveaway

Energy-saving, power-saving, and low-cost water treatment solutions without the need for chemicals! A collection of case studies on scale removal using magnetic activated water will be provided as a gift!

We would like to introduce success stories from companies that have implemented the Toko Magnetic Active Water Device "Muzatsu." ■ Does water change with the power of magnets? Is there any effect? - Magnets have no effect on water. - I used magnets, but nothing changed. - I can't trust that magnets will make a difference. - Magnets are expensive. To those who hold the above opinions, I would like to say this: If you use our "Muzatsu," I believe your perspective will change fundamentally. The Toko Magnetic Active Water Device "Muzatsu" features: - High magnetic force (the highest in the industry) - Direct contact between water and magnets (patented, so no similar products exist) It demonstrates significant effects in improving water quality.

[Factory Exclusive] Free Trial Campaign for Water Treatment Equipment for Water-Cooled Cooling Towers

Free loan for 4 months! For the removal and prevention of scale, slime, rust, and algae. If you haven't felt the effects of the conventional magnetic water treatment method, please feel free to consult us!

■Our magnetic water activation device and method are different from conventional ones (patented technology). Magnetic water activation is achieved by creating a magnetic field using permanent magnets and passing water directly through this magnetic field. However, most magnetic water activation devices available on the market are of the "clamp-on" type, which attach from the outside of the piping, and depending on the material of the piping, sufficient magnetic force may not reach the waterway. As a result, there are many cases where users do not feel any effect. To allow more customers to experience our technology, we are conducting a four-month free loan campaign. We encourage you to take this opportunity to experience the effects of our magnetic water treatment device, "Muzatsu."

Case Study Collection of the Magnetic Active Water Device "Muzatsu" (Industrial Use)

Contributing to society through water. Addressing issues of red rust, scale, bacteria, and algae in water supply pipes and cooling towers.

To everyone troubled by red rust, scale, bacteria, and algae in water supply pipes and cooling towers, we sincerely request you to try Toko's magnetic water activation device "Muzatsu." "Muzatsu" has been patented due to its novelty and potential for development. Additionally, it has been certified and registered by the Japan Water Works Association Quality Certification Center. Please feel free to use it with confidence. For more details, please download the catalog or contact us.