Resin Product List and Ranking from 447 Manufacturers, Suppliers and Companies

Injection adhesive using epoxy resin "Alpron G series"

Strong adhesion to mortar and concrete! A lineup of low-viscosity liquid types and thixotropic types.

Our company handles the injection adhesive epoxy resin "Alpron G Series." "Alpron G-50" is an injection resin for repairing cracks, gaps, and delaminations in concrete structures. It combines the excellent strong adhesion and durability of epoxy resin and has superior injectability into the interior. In addition, we also offer the liquid type "Alpron G-250" and the thixotropic type "Alpron G-2030." 【G-50/GS-53 Features】 ■ Strong adhesion to mortar and concrete ■ Low viscosity allows injection into fine cracks ■ Excellent workability ■ Superior water resistance and weather resistance ■ Minimal curing shrinkage ■ Flexibility (GS-53) *For more details, please refer to the PDF materials or feel free to contact us.

Company：日米レジン大阪営業課
Price：Other

paint
Coating Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy resin for bonding and repair 'Alpron D-12/12L'

Strong adhesion even on wet surfaces! Adhesive for bonding concrete and mortar joints.

"Alpron D-12/12L" is an epoxy resin used for bonding new concrete or mortar to old concrete, providing strong adhesion and waterproofing properties. It adheres powerfully even to wet surfaces and excels in compressive, bending, and tensile strength. Additionally, using reinforcing bars in conjunction can achieve even greater integration. 【Features】 ■ Excellent adhesion between new and old concrete ■ Superior compressive, bending, and tensile strength ■ Excellent water resistance and waterproofing ■ Greater integration can be achieved when used with reinforcing bars *For more details, please refer to the PDF document or feel free to contact us.

Company：日米レジン大阪営業課
Price：Other

paint
Coating Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance epoxy resin "Alpron A Series"

We offer a lightweight filling type with a soft paste-like consistency, as well as adhesives for block construction methods and concrete molding repair agents!

Our company offers the high-performance epoxy resin "Alpron A Series." "A-1010/1010HS" is an extremely lightweight epoxy resin-based putty. It can be applied thickly to ceilings and walls without sagging or falling, and it has excellent moldability, making it easy to work with. In addition, we also offer the adhesive for block construction "A-105T/105TD," which demonstrates strong adhesion to concrete, cement mortar, iron, wood, glass, etc., and the concrete product molding repair agent "A-6050." 【Features of A-1010/1010HS】 ■ Both the base agent and hardener are lightweight, with a cured density of 0.7 ■ Can be applied thickly ■ Easy to mix the base agent and hardener in the required amounts ■ Excellent moldability and trowel cutting, providing great workability ■ Easy to nail and perform cutting processes *For more details, please refer to the PDF materials or feel free to contact us.

Company：日米レジン大阪営業課
Price：Other

paint
Coating Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Production Example] Nano-phase Structure Tough Resin

Introducing examples of the production of robust 3D printed resins with controlled nanostructures, compatible with 355nm large-scale SLA 3D printers!

We would like to introduce examples of the production of "Nano-phase structured tough resins." The "CHL series" features high hardness (Shore D79) and high elongation (37%), compatible with 355nm large SLA 3D printers. The "RHL-E series" is a resin suitable for hinge applications in 3D printing, with medium hardness (Shore D70) and ultra elongation (101%). Additionally, we also have production examples of the "JAG series," which possesses high rebound elasticity. 【Features of Nano-phase structured tough resins】 ■ CHL Series - Compatible with 355nm large SLA 3D printers - High hardness (Shore D79), high elongation (37%) ■ RHL-E Series - Resin suitable for hinge applications in 3D printing - Medium hardness (Shore D70), ultra elongation (101%) *For more details, please refer to the PDF document or feel free to contact us.

Company：ナガセケムテックス精密加工材料事業部
Price：Other

3D Printer
Resin processing machine
Contract manufacturing
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Production Example] High Heat-Resistant Resin for Resin Molding Applications

Introducing examples of high heat-resistant resins, such as those with high heat resistance over 250℃ and high strength with a tensile strength of 94MPa!

We would like to introduce examples of high heat-resistant resins for resin mold applications. The "RHRCM series (for LCD and DLP)" has high heat resistance (HDT > 250°C) and high strength with a tensile strength of 94 MPa. The "RHRCM-S series (for SLA)" features low curing shrinkage (< 4%). In addition, we also have examples of materials for ceramic sintering, the "RCACM series (for LCD and DLP)." 【Features of High Heat-Resistant Resins】 ■ RHRCM series (for LCD and DLP) - High heat resistance (HDT > 250°C) - High strength (tensile strength: 94 MPa) ■ RHRCM-S series (for SLA) - High heat resistance (HDT > 250°C) - Low curing shrinkage (< 4%) *For more details, please refer to the PDF document or feel free to contact us.

Company：ナガセケムテックス精密加工材料事業部
Price：Other

3D Printer
Resin processing machine
Contract manufacturing
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Production Example] Castable Light-Curing 3D Printing Resin

Possible expansion into lost-wax applications! Introducing examples of castable photopolymer 3D printing resin.

Here are some examples of the production of "Castable Light-Curing 3D Printing Resin." The "RCA-BS Series" is a standard grade material that excels in fine detail reproduction and burn-out characteristics, suitable for casting gold, silver, and other metals. The "RCA-HM Series" completely liquefies at temperatures of 150-200°C, achieving excellent castability even for platinum casting. 【Features of Castable Light-Curing 3D Printing Resin】 ■RCA-BS Series 　・Standard grade suitable for casting gold, silver, and other metals 　・Material with excellent fine detail reproduction and burn-out characteristics ■RCA-HM Series 　・Completely liquefies at temperatures of 150-200°C 　・Achieves excellent castability even for platinum casting *For more details, please refer to the PDF document or feel free to contact us.

Company：ナガセケムテックス精密加工材料事業部
Price：Other

3D Printer
Resin processing machine
Contract manufacturing
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NAGASE 3DP Open Lab

Tune and customize light-curing resin! We propose light shaping devices and post-processing methods.

At Nagase Chemtex's open lab, we conduct joint experiments with customers on photopolymer 3D printing. We tune and customize photopolymer resins, and propose suitable photopolymerization devices, post-processing methods, and optimal structural shapes. We possess a wide variety of photopolymerization devices, ranging from small to large sizes, and we also have analytical equipment to measure various mechanical strengths and thermal properties. 【Features】 ■ High heat resistance ■ Structure (lattice structure, weight reduction) ■ Post-processing (cleaning, post-curing) ■ High-speed lightweight ■ Photopolymerization (prototyping, condition examination) ■ Resin (tuning, customization) *For more details, please refer to the PDF materials or feel free to contact us.

Company：ナガセケムテックス精密加工材料事業部
Price：Other

3D Printer
Resin processing machine
Prototype Services
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSR Shell Chair FRP Resin [Matte White]

Reproduced furniture focused on the quality and price of E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture nonprofit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948, and it impressively won second place. At that time, Charles Eames was striving to realize a new era of design that could be mass-produced using molded plywood, but the production using molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully brought the chair to market using FRP, which was a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, and you can choose between wood legs and a rod base. This is the side shell chair using the rod base. *The product is a reproduction imported and sold by E-comfort.

Company：川口タンス店 E-comfort東京
Price：10,000 yen-100,000 yen

Office furniture
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSR Shell Chair FRP Resin [Matte Gray]

Reproduced furniture with a focus on quality and price from E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture nonprofit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948, and it achieved an impressive second place. At that time, Charles Eames was trying to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully brought the product to market using FRP, a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, and you can choose between wood legs and a rod base. This is the side shell chair using the rod base. *The product is a reproduction imported and sold by E-comfort.

Company：川口タンス店 E-comfort東京
Price：10,000 yen-100,000 yen

Office furniture
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSR Shell Chair FRP Resin [Matte Red]

Reproduced furniture focused on the quality and price of E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture nonprofit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948, and it achieved an impressive second place. At that time, Charles Eames was trying to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully brought the chair to market using FRP, a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, with options for wood legs or a rod base. This is the side shell chair using the rod base. *The product is a reproduction imported and sold by E-comfort.

Company：川口タンス店 E-comfort東京
Price：10,000 yen-100,000 yen

Office furniture
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSR Shell Chair FRP Resin [Matte Pale Blue]

Reproduced furniture focused on the quality and price of E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture non-profit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948, and it impressively won second place. At that time, Charles Eames was trying to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully produced the chair using FRP, a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released to the world as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, and you can choose between wood legs and a rod base. This is the side shell chair with a rod base. *The product is a reproduction imported and sold by E-comfort.

Company：川口タンス店 E-comfort東京
Price：10,000 yen-100,000 yen

Office furniture
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Kibbs Case] Gear for Reduced Metal Wear

A kibbs composed of UHMWPE and over 50% lubricant! It provides better sliding properties on contact surfaces. *Exhibited at the trade show.

We would like to introduce a case where a major robot manufacturer adopted our product for mass production. They faced the challenge of wanting to apply lubricating components to the teeth of gears to reduce metal wear, and they were testing with polyacetal (POM) and oil-containing resins. However, the results were not very effective, leading them to request our assistance. After several changes to the oil-containing components and shapes, and through trial and error, we successfully created gears using Kibbs. 【Case Overview】 ■ Major Robot Manufacturer ■ Challenge: To apply lubricating components to the teeth of gears to reduce metal wear ■ Result of trial and error: Gears made with Kibbs - The adopted robot operates for several years without maintenance - The shaft center has a mechanism that allows lubricating oil to seep out from the inside *For more details, please refer to the PDF document or feel free to contact us. *We will be exhibiting the actual video at Intermold 2022 (April 20-23). Please stop by; we will provide an explanation. Booth number 5-311-33

Company：福井精機工業
Price：Other

gear
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Technical Data Presentation in Progress!] Reaction Force of Rubber-like Resin

<For customers in the Tokai area> A prototype 3D printer that simulates the rebound of rubber is now available!

Our 3D printer can create objects using rubber-like resin. Since it is a rubber-like "resin," it has elasticity, but its physical properties differ from those of conventional "rubber," resulting in a weaker rebound when compressed and a feeling of being squished. Even with the same hardness, there may be differences in rebound, so if you want to evaluate rebound in a prototype, careful selection of rubber-like resin materials is necessary. A must-see for customers in the Tokai area, especially in Shizuoka, Aichi, and Yamanashi prefectures! Feel free to contact us, even if it's just for an initial consultation.

Company：松本産業
Price：Other

Resin processing machine
3D Printer
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic Knowledge of Thermal Conductivity Thermal Conductivity Table Rigid Polyurethane, etc.

We will introduce the basic knowledge of thermal conductivity, starting with the characteristics of our materials!

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with thermal conductivity increasing in the order of "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mk (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mk) *For more details, please refer to the PDF document or feel free to contact us.

Company：多田プラスチック工業
Price：Other

Other Auto Parts
Composite Materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic knowledge of thermal conduction, thermal conductivity table, rigid polyurethane, etc.

Thermal conductivity is the amount of heat that flows through an area of 1 m² in one second when there is a temperature difference of 1°C across a thickness of 1 m.

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with the order of thermal conductivity being "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mK (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mK) *For more details, please refer to the PDF document or feel free to contact us.

Company：多田プラスチック工業
Price：Other

Injection Molding Machine
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High transparency, non-yellowing type epoxy resin "Pro Crystal 880"

It offers excellent transparency and produces a clean cured material! Here are some usage instructions.

"Pro Crystal 880" offers excellent transparency and allows for the creation of a beautiful cured material. It features extremely low curing shrinkage, resulting in a distortion-free cured product, and has low viscosity for good bubble release. Additionally, by using a separately sold curing retardant, it is possible to produce a beautiful cured material with minimal yellowing, especially when using a large amount of resin or during the summer. 【Features】 ■ High transparency, non-yellowing epoxy resin ■ Mixing ratio: 100:50 (weight) ■ Excellent transparency, resulting in a beautiful cured product ■ Extremely low curing shrinkage, resulting in a distortion-free cured product ■ Low viscosity for good bubble release *For more details, please refer to the PDF document or feel free to contact us.

Company：テムコファイン
Price：Other

Resin processing machine
others
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Carbon infusion laminate resin "NM-300A/B"

Low viscosity commercial-grade resin that can cure at room temperature.

"NM-300A/NM-300B" is a laminating resin for carbon used in infusion with a standard curing type. It can cure at room temperature, and secondary curing is required if heat resistance is necessary. Additionally, it features low viscosity and a long working time, and it does not contain IPDA (isophoronediamine). [Main Applications] ■ Laminating resin for infusion *For more details, please download the PDF or feel free to contact us.

Company：テムコファイン
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solvent-free epoxy resin "i-coat repair material"

Repairs for uneven surfaces are possible! A lineup of "for concrete" and "for quick-drying asphalt" is available.

The "Icoat Repair Material" is a solvent-free epoxy resin. The "Concrete Type" is suitable for filling holes in concrete and can repair uneven surfaces. It has excellent adhesion due to the use of epoxy resin. Additionally, the "Fast-Drying Asphalt Type" allows for operation approximately one hour after application due to its fast-drying nature. No mixing machine is required. 【Specifications for Concrete Type】 ■ Resin only EMH: Main agent 10kg + Hardener 5kg ■ Repair Material for Concrete: Main agent 2kg + Hardener 1kg + Silica sand 10kg *For more details, please refer to the PDF document or feel free to contact us.

Company：イチネンケミカルズ
Price：Other

Repair Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【ダイフロン】PTFEの弱点を克服した「硬い」フッ素樹脂

優れた機械的特性！難削材であるPCTFEを自在に操る株式会社ダイコーの加工力もご紹介

フッ素樹脂といえば「PTFE」が有名ですが、万能に見えるPTFEにも明確な弱点があります。それは「柔らかすぎて、強い圧力がかかると変形してしまう(コールドフロー)」ことです。高圧ガスのバルブや、高い寸法精度が求められる配管ラインで「変形しては困る」場合に選ばれるのが、「ダイフロン」の通称で知られるPCTFE(3フッ化樹脂)です。今回は、PTFEの弱点を克服したこの高機能素材の特長と、難削材である PCTFEを自在に操る株式会社ダイコーの加工力についてご紹介します。 ※コラムの詳細内容は、関連リンクより閲覧いただけます。　詳しくはPDFをダウンロードしていただくか、お気軽にお問い合わせください。

Company：ダイコー本社
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Liquid casting resin for electrical and electronic components

Low viscosity, fast curing properties, and flexibility! Suitable for power devices and semiconductors.

"Liquid Casting Resin for Electrical and Electronic Components" is a liquid resin material for casting and potting primarily used in electronics products. It possesses characteristics such as high heat resistance, thermal conductivity, and flame retardancy, making it suitable for various fields including automotive and transportation equipment, semiconductors, electronic circuit boards, electrical devices, and sensors. We will select products specialized for various properties such as insulation, heat resistance, and heat dissipation. Additionally, we also handle electrical insulation varnish. 【Characteristics】 ■ High heat resistance ■ Thermal conductivity ■ Flame retardancy ■ Low viscosity / fast curing ■ Flexibility *For more details, please refer to the PDF document or feel free to contact us.

Company：澤村電材
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Engineering resin "high-performance polyamide resin"

A resin material with excellent toughness, wear resistance, and chemical resistance! Numerous achievements in automotive parts and food packaging films!

Our company handles high-performance polyamide resins such as Grilamid(R), Grivory(R), and Grilon(R). These polyamide resins possess outstanding physical properties in terms of toughness, wear resistance, and chemical resistance, making them superior to other resins and widely used among engineering plastics. 【Product Lineup】 ■Grilamid(R) ■Grivory(R) ■Grilon(R) *For more details, please download the PDF or contact us.

Company：エムスケミー・ジャパン
Price：Other

Composite Materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass long fiber reinforced resin "Grivory GVL"

Glass fiber reinforced resin suitable for metal replacement. There is a track record of its introduction in automotive parts.

Grivory (GVL) is a glass fiber reinforced resin. It has high notched impact strength and excellent energy absorption during collisions, making it a suitable material for metal replacement. 【Case Study - GVL-4H】 Headlamp bracket for Jaguar Land Rover An assembly bracket made of aluminum and pressed steel has been replaced with a resin-integrated product. <Benefits> ■ Reduction in the number of parts ■ Total weight reduction of 45% ■ Manufacturing costs reduced by 30% due to the elimination of post-processing time for metal parts. *For more details, please download the PDF or feel free to contact us.

Company：エムスケミー・ジャパン
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Steel plates, non-ferrous metals, plastics

We can also sell cut angle steel and polished round steel! If you have any desired materials, please feel free to consult with us.

We would like to introduce the steel plates, non-ferrous metals, and resins that we handle. We can procure general steel, tool steel, special steel, stainless steel, and non-ferrous metal 6F plates, polished plates, and cutting services. We also sell cut shape steel such as angles and polished round bars. We have overseas procurement routes, so please consult us if you have any specific materials in mind. 【Features】 ■ Procurement of general steel, tool steel, special steel, stainless steel, and non-ferrous metal 6F plates, polished plates, and cutting services is possible. ■ Cutting sales of shape steel such as angles and polished round bars are also available. ■ Various procurement routes secured. ■ Flexible response possible. ■ Overseas procurement routes also available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：AZURITE
Price：Other

Non-ferrous metals
Resin mold
Other contract services
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin "Ultra Resistor" [Application Results]

Exhibits excellent self-lubricating properties! A resin that is resistant to strong acids and alkaline solutions!

"Ultra Resistor" is a material characterized by excellent self-lubrication, making it suitable for rolls that require sliding properties. Additionally, it has excellent resistance to strong acidic and alkaline solutions, allowing it to be used without issues in synchro roll applications. It has an antistatic effect, making it effective for static electricity measures. Furthermore, by using rubber as a backing, flexibility can be achieved. Thanks to our unique manufacturing method, there are no size limitations like those of tubes, allowing for lining in desired sizes and thicknesses. 【Features】 - Low wear: Static and dynamic friction coefficients are equivalent to fluororesin - Wear resistance: About 1/5 that of fluororesin - Chemical resistance: Resistant to strong acids and alkalis - Low-temperature properties: Maintains high impact strength even near -200°C 【Application Results】 Table rolls, synchro rolls, underwater rolls, guide rolls, backup rolls *For more details, please refer to the PDF materials or feel free to contact us.

Company：岡本ローラ製作所
Price：Other

Rubber
roller
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LPM Handbook - Thermal Plasticity: Beginner's Edition

A handbook explaining LPM resin manufacturers! It provides clear advice on key points.

This document is a handbook that provides clear advice on key points for those considering LPM for the first time. It includes features of LPM, product shapes (thermoplastics), and types of sealing resins. Our company collaborates with Toyobo Co., Ltd. (a material manufacturer) to provide total support from resin development to mold production, prototype support, and contract mass production, offering "materials and solutions." [Contents (excerpt)] ■ What is LPM ■ Features of LPM ■ Case studies of LPM usage (thermoplastics) ■ Product shapes (thermoplastics) *For more details, please refer to the PDF document or feel free to contact us.

Company：中谷産業
Price：Other

Processing Contract
Mold Design
Prototype Services
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hydrophobic Liquid Polyurethane Resin "Bandestop 50"

You can use it to stop water leaks from cracks in concrete structures.

"Bandestop 50" is a hydrophobic one-component polyurethane resin developed for stopping leaks. For major leaks, please consider the higher-grade acrylic-based two-component synthetic resin "Bandex Flexin." 【Features】 ■ Can be used safely without solvents ■ Low viscosity for excellent workability ■ Immediately foams upon contact with moisture, providing a sealing effect ■ Complies with Ministry of Health, Labour and Welfare Notification No. 45 regarding material testing for equipment and materials *For more details, please download the PDF or feel free to contact us.

Company：日本バンデックス本社・東日本営業所
Price：Other

others
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SANWA MASSO ROSIN

It can be used for printing inks, adhesives, synthetic rubber, paints, and more!

We would like to introduce our product, "SANWA MASSO ROSIN." In Vietnam, GUM ROSIN is typically produced by distilling pine resin sourced from Cambodian pine, which is inexpensive but has lower performance. To enhance performance, we distill high-function GUM ROSIN from pine resin sourced from Taiwan red pine, which is commonly used in Chinese ROSIN. It can be used in various applications, including sizing agents for paper chemicals, coating agents, paper strength enhancers, printing inks, adhesives, synthetic rubber, and paints. 【Functions】 ■ Adhesive properties ■ Surfactant for improved dispersion and emulsification ■ Emulsifier for rubber polymerization ■ Hydrophobic treatment *For more details, please refer to the PDF document or feel free to contact us.

Company：三和商会
Price：Other

others
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Alternative to glass sight glass. Visibility + strength + lightweight PFA resin.

Fluoropolymer (PFA) flow cell that allows for fluid visibility. Reduces the risk of contamination due to breakage that could occur with traditional glass products. Change to GL tube glass.

The 【RH10/RW10】 is a fluororesin flow sight made of Teflon (PFA) material that significantly reduces the risk of contamination due to breakage. By maximizing the high transparency of PFA, it enables effective visual confirmation of fluids, which is a management method in manufacturing processes. The use of PFA, a lightweight and shatter-resistant resin, addresses the significant issue of breakage and contamination that has been a challenge with traditional glass products. Additionally, a new lining joint type has been added to the lineup, making it applicable to lines that require strict management, such as those for high-purity chemicals. It serves as an alternative to glass sight glasses, glass piping, glass-lined piping, glass tubes, glass linings, glass pipes, and GL pipes. 【Features】 ■ Uses thick Teflon (PFA) tubing ■ Visibility + strength + lightweight ■ Significantly reduces the risk of breakage due to resin material ■ Reliable durability through dedicated fitting crimping processing ■ SUS exterior available as an option 【Applications】 Recommended for use in various manufacturing process filling lines, aseptic lines, blood/bio preparations, and high-viscosity products. 【Compliance Standards】 Food Sanitation Act

Company：ULTIVATE Inc.
Price：Other

Piping Materials
hose
Pipe Fittings
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Material Selection Points] Determine the required temperature for heat-resistant resins.

This leads to avoiding unnecessary cost increases! Choose materials and resins that perfectly match the conditions.

Points for Selecting Resin Materials that Lead to Cost Reduction: "Determine the actual temperature requirements for heat-resistant resins." Resins such as PEEK are available as heat-resistant materials, but the material itself is expensive. While considering cost reductions by changing shapes and precision can yield some effects, there are limits. To reduce costs for heat-resistant resins, it is essential to accurately assess the necessary temperature and select a suitable resin. Choosing materials and resins that precisely meet the design and usage requirements helps avoid unnecessary cost increases. [Overview] - PEEK and other materials are available as heat-resistant resins, but they are expensive. - To reduce costs for heat-resistant resins, first determine the actual required temperature. - Selecting appropriate resins is the shortcut. *For more details, please refer to the related links or feel free to contact us.

Company：太陽ゴム工材
Price：Other

Processing Contract
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

UV-curable resin, flexible type TRU-0202

It is a radical-type UV-curable resin. It has been given anaerobic and heat-curing properties. It is flexible and effective in preventing cracks.

TRU-0202 Radical-type UV-curable resin Features: Flexibility, heat resistance, moisture resistance, anaerobic curing, heat curing Applications: Protection of small motors and sensors *Anaerobic curing is applicable only when the substrate is metal 【Specifications (excerpt)】 ■Viscosity: 25℃ 8,000 (mPa·s) ■Glass transition temperature: -30℃ ■Shear adhesive strength: 11.0 (MPa) AL/AL 25℃ 11.0 (MPa) 85℃/85℃RH after 1000h ■Recommended curing conditions: UV metal halide lamp 3,000mJ/cm² or 80℃ x 2h / Anaerobic curing

Company：寺田
Price：Other

Other polymer materials
Coating Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin Product List and Ranking from 447 Manufacturers, Suppliers and Companies | IPROS GMS

Resin Manufacturer, Suppliers and Company Rankings

Resin Product ranking