Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 178 items
Robots and programs that encourage innovative thinking.
Peritech offers new robotics using Denso Wave's multi-joint arm robots and the graphical programming language LabVIEW.
Jobs related to all types of control.
Custom-made control of all kinds is possible!
Leave heating, cooling, and dehumidifying to us! We will create the desired temperature and humidity environment with high precision temperature control of ±0.1℃.
Achieved energy-saving and high-precision temperature management through "local air conditioning," which only conditions a limited space. It is recommended for constant temperature rooms, testing machines, and precision processing machines where even slight temperature changes are not allowed. 【Features】 ■ Temperature control accuracy: ±0.1℃ ■ Minimal costs due to local air conditioning! Precision air conditioning systems use a local air conditioning method that divides spaces. Since only the area where temperature and humidity management is desired is controlled, large-scale equipment is unnecessary. It can be implemented at a lower cost compared to whole air conditioning. ■ No management costs for refrigerants as it uses non-fluorocarbon refrigerants! With an extremely low Global Warming Potential (GWP), it is exempt from the Fluorocarbon Emission Control Law, eliminating costs for refrigerant recovery or destruction upon disposal, and there are no obligations for regular inspections of the precision air conditioning unit during use. ■ Up to 88% energy savings (eco) with complete heater-less and inverter control compared to our conventional models. ■ Equipped with a dry mode for dehumidification purposes The standard dry mode enhances dehumidification capability. Therefore, it can not only maintain a constant temperature but also dehumidify simultaneously. *For more details, please refer to the PDF document or feel free to contact us.
I/O control. It will be done via Ethernet or RS-232C. High performance at a low price.
SNMP supports email transmission as well, offering high functionality at a low price.
Motor controller function 'Gantry Control' delivered by Cosmotex.
This is the "Gantry Control" enabled by the unique development of Cosmotex's 'PGS (Pulse Generation Software)' series. Gantry control is equipped as a basic function (API compatible). By applying the axis linkage function, the Y2 axis (master axis) is set to link with the Y1 axis (slave axis), allowing the Y2 axis to automatically follow just by issuing commands to the Y1 axis alone. *For more details, please download the PDF or feel free to contact us.
Orion Machinery/Air Dryer. Energy-saving mode switch for dew point temperature, achieving up to 60% energy savings.
■ Energy-saving mode switch for dew point temperature. In addition to a dew point of 10°C under pressure, 18°C is also selectable. This enables significant energy savings during high-temperature periods. Additionally, it is possible to prevent condensation caused by the difference in outdoor temperature. A feature has been added to automatically adjust the dew point setting under pressure in conjunction with the outdoor temperature (for models RAXE4900 and above). ■ Achieves up to 60% energy savings. Through the unique development of "frequency PID control of the inverter compressor" and "infinitely variable PID control of the electronic expansion valve for optimizing the refrigeration cycle," significant energy savings have been achieved even during normal operation compared to the conventional RAX series (CCV control). Furthermore, when the dew point under pressure is set to 18°C, up to 60% energy savings are possible (RAXE4900 model achieves up to 53%). ■ Responds to low-pressure needs (0.54MPa standard). In response to low-pressure needs, the design standard pressure has been changed from 0.69MPa to 0.54MPa. There is no need for a rank upgrade in model selection at low pressure (for models RAXE2300 to 4900). ■ Continuous operation even under high load. With unique control, continuous operation is maintained even under unexpected high loads, making it difficult to stop before safety devices are activated through self-protection control. ■ Inverter control allows for the same capacity at 50Hz and 60Hz.
It is possible to build a UHF band hands-free access authentication system!
The system can establish secure access control linked with the upper system using the ASI4000net/LEX, which has a built-in clock and flash memory. Additionally, we offer the management software package "SECURART." The electric locks that can be connected using ASI4000net include types that lock and unlock each time power is supplied, such as MIWA's AUT, AUTA, AUR, AURA, and AMS, as well as motor locks and automatic doors. As a hands-free authentication method, it can be used for access authentication in medical environments and food factories where the act of "holding up" is not suitable. 【Features】 ■ Easy control of locking and unlocking electric locks using ASI4000net ■ Usable for types that lock and unlock each time power is supplied, motor locks, automatic doors, etc. *For more details, please refer to the PDF materials or feel free to contact us.
It automatically controls the operation of duct-mounted lighting to optimize it according to the constantly changing air conditions.
It is effective in systems with variable air volume air conditioning or when significant changes in air volume occur between day and night with timer control! 【Main Features】 - Equipped with 4 sensors for automatic monitoring of supply air - Can be used with only the sensor unit without the need for a special control panel - Easily installable on the secondary duct of the air conditioning system
A new idea with the weather on our side. Fully utilizing the "power" of storage batteries!
"SmartSC" is an optimization control system that maximizes the full potential of storage batteries by predicting surplus electricity in a self-consumption system that combines solar power generation and storage batteries. By consuming the stored electricity based on surplus predictions derived from generation and load forecasts, it maximizes "surplus utilization" while maintaining a high charging rate of the storage batteries. Additionally, it leverages the high charging rate to reduce basic electricity charges through "peak cutting," and maximizes "power supply to critical loads" as a BCP during disasters. "SmartSC" is standardly equipped with technology that maximizes these three effects brought by storage batteries. 【Effects】 ■ Maximizes the effects of "surplus utilization," "peak cutting," and "BCP" ■ Generation forecasts up to 36 hours ahead using the Japan Meteorological Agency's "meso model" ■ Load forecasts up to 36 hours ahead based on load and temperature history and temperature predictions ■ Provides profitability simulations *For more details, please refer to the PDF document or feel free to contact us.
Low vibration, low noise
The flagship model of Air Kogyo heralds a new era in the removal and installation of large vehicle wheel nuts.
Electric control valve / solenoid valve
This is a comparative control application. The two-way valve type controls the flow to the heat exchanger based on the signal from the controller, maintaining a constant temperature on the load side. The three-way valve type allows a portion of the fluid to bypass the heat exchanger based on the controller's signal, mixing the fluid that passes through the heat exchanger with a three-way valve to maintain a constant temperature on the load side. Without using a three-way valve, two control motors (electric actuators) operate dampers, butterfly valves, and ball valves for the heat exchanger inlet and bypass, controlling in a similar manner. 【Features】 ■ Two-way valve Maintains a constant temperature on the load side by controlling the flow to the heat exchanger with a two-way valve. ■ Three-way valve Maintains a constant temperature on the load side by mixing the fluid that passes through the heat exchanger with a three-way valve. Without using a three-way valve, two control motors (electric actuators) operate dampers, butterfly valves, and ball valves for the heat exchanger inlet and bypass, controlling in a similar manner. *For more details, please contact us.
Control that is carried out according to established procedures for factory equipment and information.
Control that performs factory equipment and information according to specified procedures using relays and programmable controllers. 【Features】 ○ The programmable controllers used include Mitsubishi Electric (Fx and Q series), Koyo Electronics, Izumi Electric, and Keyence's non-sequencer. ○ Touch panels used are from Mitsubishi Electric, Digital, and Hakkou Electric. ○ Skilled in programs for communication, analysis, and collection of data between computers, sequencers, and measuring instruments. ● For more details, please contact us.
It can be used for various purposes with different attachments.
KTA-01 can be used for various applications depending on the attachments connected. It controls temperature on the desktop (-55℃ to +150℃) and can be used for semiconductor thermal load testing, temperature-controlled laser devices, chromatography columns, gas sensors, biotechnology samples (as a thermal cycler), and chemical reaction control, among other applications. The operating environment temperature is 5 to 35℃, with a maximum cooling capacity of 120W, a maximum cooling temperature of -55℃ at an ambient temperature of 23℃ (without load), and a maximum heating temperature of +150℃. For more details, please contact us or refer to the catalog.
Direct bonding of small electrical components made of aluminum, copper, and different materials is possible. Ideal for laminated bonding of aluminum foil and copper foil! Achieve precise bonding of electrical components without solder and without resistance.
The "SONICS-MW Series" is an ultrasonic metal welding machine that achieves high response and precise control of ultrasonic output without loss, enabling extraordinary metal bonding through variable output during joining and motor pressure application. The ultrasonic oscillator is available in five frequencies: 15, 20, 30, 35, and 40 kHz, and supports a wide range of ultrasonic output from 500 to 4500 W, accommodating various metal bonding applications. 【Features】 ■ A low-cost running type based on an ultrasonic horn with a mainstream exchangeable tip system ■ High-pressure bonding is possible due to the unique ultrasonic horn function, with no distortion loss from high pressure ■ 1μm precision dimensional control using a linear encoder ■ Precise pressure control through servo motor pressure application and pneumatic control cylinder pressure application ■ Capable of bonding large components and dissimilar metals with various high-output ultrasonic machines ■ Suitable for bonding metal foils such as multilayer aluminum foil and copper foil due to diverse ultrasonic frequencies ■ Precise control of ultrasonic output enables stable airtight bonding, such as sealing copper pipes *For more details, please refer to the PDF documentation or feel free to contact us.
