Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
241～270 item / All 7310 items
A compact micro pump utilizing electromagnetic valve technology. It enables pumping in both forward and reverse directions through polarity reversal.
With the internal adjustment screw of the pump, the frequency is variable, and you can select the number of shots per minute in stages. Additionally, it features a pulse mode of one pulse per shot (5μl), allowing for dispensing at any desired measurement volume.
High viscosity and high temperature compatible / Capable of transferring high viscosity fluids up to 20,000 mm²/s.
The "KF Series" gear pump is a volumetric precision gear pump manufactured by KRACHT, which achieves low noise through the use of helical gears. Gear pumps excel in metering accuracy as they transfer fluid in volume units based on the gears, and they are particularly efficient in terms of volumetric efficiency with high-viscosity fluids, making them suitable for the precise transfer of high-viscosity liquids. The flow rate ranges from 2.5 to 1,500 cm³/rev, and it can handle a wide temperature range from -50 to +200°C for liquid transfer. Additionally, it offers a rich variety of shaft seal options, allowing for the selection of various shaft sealing methods, making it suitable for a wide range of applications. 【Features】 ■ Suitable for precise transfer of high-viscosity and high-temperature fluids ■ Compact pump and motor selection possible due to a wide lineup ■ Low noise operation achieved through the use of helical gears *For more details, please refer to the PDF document or feel free to contact us.
The seal-less structure prevents any liquid leakage from the shaft seal area!
The "A7VK + MG Series" is a seal-less high-pressure variable displacement piston pump for polyurethane. It allows for easy adjustment of the raw material supply to match the polyurethane products being molded, using a variable handle. Additionally, a new handle lock mechanism has been adopted to prevent malfunction after adjustment. 【Features】 ■ Seal-less pump that prevents liquid leakage ■ Specially designed for supplying polyurethane raw materials such as isocyanates and polyols ■ Easy adjustment of the raw material supply amount using the variable handle ■ Compact design ■ Easy adjustment of the raw material supply amount using the variable handle *For more details, please refer to the PDF document or feel free to contact us.
Vacuum pump
Vacuum pump (oil-free type: rotary type) Exhaust speed: 16!)40[m3/h] Achievable vacuum level: 120[mbar]・120[hPa]
Just turn on the light! With the power of silver ions, it can disinfect, deodorize, and prevent mold!
■Bacteria, viruses, bad odors, and mold The sterilization lighting removes harmful bacteria by dispersing silver ions (Ag+) in the space. It can inactivate 99.882% of the novel coronavirus in 8 hours, and its effectiveness against many harmful bacteria, viruses, and bad odors has also been confirmed. It is harmless to the human body and uses energy-efficient, long-lasting CCFL fluorescent lamps. *This product is intended for rental use with a dedicated cover attached. The sterilization effect is displayed based on test results from a third-party organization and the manufacturer's view that it is due to the sterilization effect of silver ions.
![[Case Study] Visualizing Dust in Clean Rooms! Making it Visible!](https://image.mono.ipros.com/public/product/image/994/2000660357/IPROS44914085696617189763.png?w=280&h=280)
A case where customers were able to visually confirm dust themselves and discover the cause of foreign matter contamination.
This is a case where we solved problems related to foreign object contamination measures at a food manufacturing site. We decided to thoroughly implement measures against foreign object contamination to further improve quality. Despite the absence of visible dust, there were issues with foreign object contamination, leading the client to consult with Kamata Industries without finding a solution. We proposed a specialized light to visualize and make dust visible. We delivered a user-friendly size of the specialized light, allowing the client to confirm the visualization of dust themselves, identify the causes of foreign object contamination, and achieve their goal of quality improvement (measures against foreign object contamination). [Issues] - There are suspicions of foreign object contamination in the clean room. - There is no visible dust of significant size. - They were searching for a method to visualize dust. *For more details, please refer to the PDF document or feel free to contact us.
A coin-sized micropump that can operate flow rates with drive voltage and frequency! Achieves low noise and energy efficiency. Flow rate: 3 mL/min, 7 mL/min.
The piezo micro pump "SDMP series" is an ultra-compact pump that can be powered by dry batteries. If it is a built-in driver type, you can easily start liquid delivery by simply connecting the power supply. The standard type has external dimensions of 25 × 25 × 4.8 mm and weighs approximately 4 g. This size achieves a standard flow rate of 3 mL/min and 7 mL/min for ultra-small volumes! The larger high-flow type can accommodate a standard flow rate of up to 20 mL/min. It can be easily installed anywhere, making it suitable for integration into small devices and for various liquid delivery applications. 【Features】 - Compact, thin, and lightweight, capable of delivering minute amounts of liquid - No metal is used in parts that come into contact with the liquid - Low noise and low power consumption - Flow rate control is possible through driving voltage and frequency - Self-priming capability, no priming water required *For more details, please download the PDF or feel free to contact us.
![Non-pulsating pump - EOP-driven micro pump unit [under development]](https://image.mono.ipros.com/public/product/image/f4f/2000203130/IPROS25474264953795983490.jpeg?w=280&h=280)
It utilizes the phenomenon of electroosmosis and is characterized by being non-pulsating, quiet, compact, lightweight, and capable of high pressure. The indirect drive mechanism allows for the pumping of various liquids.
The electric osmotic flow pump (EOP) that uses electric osmotic pressure is ideal for microfluidic systems sensitive to pulsation, as it does not generate pulsation; however, it can only directly transport ethanol. To overcome this limitation, this pump unit is equipped with an internal diaphragm that isolates ethanol and other substances from the transport liquid. This indirect drive mechanism allows for the transport of various liquids. 【Features】 ■ Utilizes the electric osmotic flow phenomenon, characterized by being pulsation-free, quiet, compact, lightweight, and high-pressure. ■ The flow rate increases or decreases linearly with the applied voltage (VDC), making it easy to control. ■ An option for a discharge pressure of 1 MPa is also available. *For more details, please contact us or download the PDF.
The pump body is a cartridge-type compact, slim, and lightweight micro pump. The liquid contact parts can be easily replaced for each fluid used, ensuring hygiene.
This is a type of piezo pump that allows for the replacement and sterilization of the liquid contact part. It is suitable for applications such as cell culture, where contamination is a concern! It is compact, lightweight, and energy-efficient. 【Features】 - The dedicated drive unit and liquid contact part using piezo elements can be easily detached and attached with magnets. - The cartridge part can be sterilized before use. No metal is used in the areas that come into contact with liquids. - It has self-priming capability and does not require a priming liquid. - Flow rate control is possible through driving voltage and frequency. - It is compact, slim, and lightweight. Additionally, it operates with low noise and low power consumption. *For more details, please contact us or download the PDF.
Finger-sized micro tube pump, with a proven track record of adoption by the U.S. space development agency. It is compact, lightweight, and low power consumption, making it suitable for various applications.
This is a very compact fingertip-sized pump. The discharge volume is 0.2 to 3.0 mL/min, and the discharge pressure is 50 kPa. There are models that allow for easy replacement of the pump head (the wetted part), making it applicable for various uses. Multiple tube materials are also available. It is driven by a DC motor rated at 3 V and can be easily operated by simply connecting it to a dry battery. 【Features】 ■ It is a very compact and lightweight pump. ■ It has low power consumption, with a discharge volume of less than 0.4 W (RP-QIIA/QIIIA is less than 0.5 W). *For more details, please download the PDF or feel free to contact us.
This is a small, thin, lightweight piezoelectric-driven diaphragm micro pump. It has increased flow rate compared to the standard type while maintaining low noise and low power consumption.
The "SDMP High Flow Series" is a compact, thin, and lightweight piezoelectric diaphragm micro pump. It has been made slightly larger to achieve a flow rate of 20 mL/min, which is greater than that of the standard type. The flow rate can be controlled by adjusting the pump drive voltage and frequency from an external source. If you have any questions about this product, please feel free to contact us. 【Features】 ■ Compact, thin, and lightweight piezoelectric diaphragm design ■ Slightly larger size to achieve a flow rate of 20 mL/min, greater than the standard type ■ Flow rate can be controlled by adjusting the pump drive voltage and frequency from an external source ■ No metal used in parts that come into contact with liquids ■ Low noise and low power consumption ■ Self-priming capability, no priming water required *For more details, please refer to the PDF document or feel free to contact us.
A diaphragm-type micropump driven by a piezo element with a built-in drive circuit. Compact, thin, and lightweight, capable of delivering small amounts of liquid! Low noise and low power consumption pump.
The "SDMP_D Series" is a piezoelectric diaphragm micro pump that incorporates a driving circuit (driver). By simply supplying a DC voltage without generating a special waveform for piezoelectric drive, it can operate the pump with a constant voltage and constant frequency signal, delivering a constant flow rate. Flow rate and pressure adjustments are not possible. If you have any questions about this product, please feel free to contact us. 【Features】 ■ Piezoelectric diaphragm type with built-in driving circuit ■ Compact, thin, and lightweight, capable of delivering small amounts of liquid ■ No metal used in parts that come into contact with the liquid ■ Low noise and low power consumption ■ Flow control possible through driving voltage and frequency ■ Self-priming capability, no priming water required *For more details, please refer to the PDF document or feel free to contact us.
Due to the diaphragm type, it has excellent corrosion resistance! It discharges fluid with high precision and in a quantified manner.
The "MCP series" is a quantitative dispensing pump with a maximum discharge volume of 50μL. It has a very high repeatability accuracy of 1-2% for cyclic dispensing. The adjustment range for the discharge volume per cycle can be manually set between 5-50μL. It can be controlled simply by turning the DC power supply ON and OFF, without the need for a stepping motor or dedicated driver. If you have any questions about this product, please feel free to contact us. 【Features】 ■ Maximum discharge volume is 50μL ■ Adjustment range per shot is 5-50μL ■ High precision cyclic dispensing of quantitative fluids ■ Can be controlled only by turning the DC power supply ON and OFF ■ No need for stepping motors or dedicated drivers ■ Good corrosion resistance due to diaphragm type *For more details, please refer to the PDF document or feel free to contact us.
The adjustment range for the discharge volume per shot is 50 to 500 μl! Introducing a quantitative dispensing pump.
The "PKP Series" is a quantitative dispensing pump with a maximum discharge volume of 500μL. It has a very high repeatability accuracy of 1% and dispenses in cycles. The adjustment range for the discharge volume per cycle can be manually set between 50 and 500μL. If you have any questions about this product, please feel free to contact us. 【Features】 ■ Maximum discharge volume is 500μL ■ Discharge volume adjustment range per shot is 50 to 500μL *For more details, please refer to the PDF document or feel free to contact us.
![Product Adoption Case No.1 [Kumamoto University] Thin Micro Pump for Gas Analysis Equipment](https://image.mono.ipros.com/public/product/image/7f4/2000358575/IPROS04253874398055063563.jpeg?w=280&h=280)
A corrosion-resistant, compact, and lightweight micro-dispensing pump has been adopted for the gas analysis device at Kumamoto University, contributing to the development of portable analysis equipment.
We proposed a shape memory alloy-driven pump as a small, lightweight micro-dispensing pump with excellent corrosion resistance to address the challenge of flowing 10-20 μL/min of dilute sulfuric acid and fluorescein mercuric acetate (FMA) as reagents into a microchannel, thereby meeting customer requirements. We successfully developed a portable analytical device of compact size, which has proven effective in detecting gases emitted from the crater of Mount Aso in Kumamoto and gases released from the tidal flats of Ariake Sea. The results were also presented at the Analytical Chemistry Society. 【Features of the device】 ■ An analytical device for detecting gas concentrations of atmospheric pollutants SO2 and H2S ■ A portable μTAS using microchannels
Introduction of actual measurement examples of changes in the operating frequency and reproducibility of quantitative dispensing pumps.
The change in operating frequency of the quantitative dispensing pump affects the discharge volume and reproducibility. When the operating frequency is faster than the specified value in the drawing, reproducibility deteriorates. Here, we present an example of changing the operating frequency and measuring the change in reproducibility. Measurement model: NRP-500P Measurement conditions: At an operating frequency of 2Hz, the discharge volume is set to 500mm3 (Other than the conditions below, standard test conditions apply) 【Measured examples of changes in operating frequency and reproducibility (excerpt)】 ■Operating frequency: Reproducibility (maximum value error / minimum value error) ・5Hz: +5.88% / -7.00% ・3.3Hz: +5.08% / -2.39% ・2Hz (specified value in the drawing): +0.09% / -0.28% ・1.7Hz: +0.09% / -0.09% *For detailed measurements, please refer to the link below. *For information on quantitative dispensing pumps, please refer to the PDF document or feel free to contact us.
We will introduce actual measurement examples of changes in discharge volume and reproducibility when varying ambient temperature and fluid temperature.
The quantitative dispensing pump is affected by changes in ambient temperature and fluid temperature, which influence the discharge volume and reproducibility. This occurs because the rubber components used in the wetted parts are affected by temperature, causing changes in hardness. Here, we present examples of measuring discharge volume and reproducibility when varying ambient and fluid temperatures. Measurement Model: NRP-500P Measurement Conditions: Discharge volume set to 500mm³ at an ambient temperature and fluid temperature of 24°C (Other than the conditions below, standard test conditions apply) 【Table of Changes in Ambient Temperature, Fluid Temperature, Discharge Volume, and Reproducibility - Measured Examples】 ■ Ambient Temperature, Fluid Temperature (°C): Discharge Volume (mm³): Reproducibility (Maximum Value Error / Minimum Value Error) - 10: 461: +4.64% / -4.70% - 24: 497: +0.64% / -0.62% - 40: 550: +2.20% / -2.89% *For detailed measurements, please refer to the link below. *For information on the quantitative dispensing pump, please refer to the PDF document or feel free to contact us.
A palm-sized, compact, and lightweight syringe pump! Compared to conventional syringe pump systems, costs have been significantly reduced.
This is a syringe pump that is palm-sized yet incorporates a stepping motor as its driving source. It achieves zero dead volume, which is impossible with similarly sized plunger pumps. The capacity has increased to 1000 μL compared to our pen-type syringe pump (SBP series). 【Features】 - The SCP series is a palm-sized syringe pump with a built-in motor. - Fluid is discharged by the movement of the motor shaft in the direction of the piston’s motion. - It is smaller, lighter, and significantly more cost-effective compared to conventional pumps with the same capacity. - It achieves zero dead volume, which is impossible with similarly sized plunger pumps. - We can also accommodate requests for disposable syringe models. - A user-friendly controller, the SXPC series, is also available. *You can choose the connection and fluid contact materials. Please consult us.
A super small pump capable of controlling liquid medications such as insulin at the microliter level. It can also function as a wearable infusion pump powered by a battery.
Introducing a compact, portable, and affordable infusion pump! It can be battery-operated and is easy to use as a wearable infusion pump (insulin pump). The fluid connection part can be easily replaced, making it hygienic and economical. 【Features of the Micro Infusion Pump】 - Ultra-compact - Controls medication such as insulin at the micro-liter level - Operates on battery power - The fluid connection part is disposable, ensuring hygiene and cost-effectiveness - Easy attachment and detachment of reusable and disposable parts *For more details, please download the catalog from the PDF below or feel free to contact us.
This is a micropump capable of delivering extremely low flow rates of liquid medications such as insulin. The liquid contact parts are disposable. It is used for fluid delivery management and abnormal detection.
This is a micro pump capable of delivering low-flow drug solutions such as insulin. Depending on the application, you can choose from four different basic structures. All types have disposable parts that come into contact with the drug solution. The main feature is the ability to provide a feedback system combined with a flow meter that can measure in microliter units. This is suitable for high-precision delivery management and for detecting delivery anomalies. Customization for flow rate and other parameters is possible for all types. 【Four Basic Structures】 1. Tube Pump (Peristaltic Pump) Simple structure. Controls the amount of drug solution based on the motor's rotation speed. No free flow. 2. Piezoelectric Diaphragm Pump Slim, low power consumption. Wide range of flow control. 3. Electroosmotic Drive Micro Syringe Pump Micro syringe can be used directly for drug solution storage. Extremely low power consumption. High discharge pressure. 4. Shape Memory Alloy Driven Quantitative Discharge Pump The entire pump body is fully disposable. Slim and extremely lightweight.
![Micro Syringe System [Under Development]](https://image.mono.ipros.com/public/product/image/527/2000575328/IPROS61121205019825655486.jpeg?w=280&h=280)
Approximately 12g ultra-compact and ultra-lightweight syringe pump.
【Features】 - It is an ultra-compact pump with external dimensions of φ17×length 95mm. The syringe in the photo has a capacity of 3ml (customizable) and is disposable. - It can be battery-operated. The unit on the left in the photo is a demo unit designed to resemble a wearable injection system, including dry batteries and circuits in the casing, with a total weight of only about 80g. - It is capable of dispensing in microliter units. - It uses an electric permeation flow actuator as its power source, characterized by silent operation and low power consumption.
Compact realization of stable, pulsation-free liquid delivery.
- Liquid is delivered while maintaining a constant pressure inside the bottle using a pressure sensor. - Stable micro-pressurization has been achieved. With the feedback function, pressure adjustments can be made in increments of 0.1 kPa. - By changing the pump used, the corresponding pressure can also be changed. 【Specifications】 Pressure range: 0 to 10 kPa Pressure adjustment unit: 0.1 kPa Feedback: ± 0.1 kPa Voltage: 12 VDC External dimensions: W 170 × L 70 × H 120 mm *For more details, please contact us or download the PDF.
A fingertip-sized microtube pump! It is compact, lightweight, and low power consumption, making it suitable for various applications.
【Features】 - This is a compact-sized pump. - It is a stepping motor type with four different flow rates available for selection based on your application. - Compatible tubes can be selected from silicone and FEP (Fluorinated Ethylene Propylene). - The pump head (liquid contact part) can be easily replaced. - The pump head is sterilizable. - It is ideal for analytical instruments, medical devices, fuel cells, drug delivery systems, and regenerative medicine (cell culture), among others. * For pumps using silicone tubes: Autoclave (121°C for 25 minutes x 1 time) / Gamma radiation (25 kGy) For pumps using FEP: Gamma radiation (25 kGy) * Autoclaving is not possible. * For more details, please download the PDF or feel free to contact us.
The pump head replacement uses a one-touch exchange method with a powerful magnet.
【Features】 - There are two types: brushed DC motor and brushless DC motor. - The flow rates are available in two options (3–7 mL/min, 3–10 mL/min). - You can choose from four types of tube materials: silicone, Firmed BPT, Versilon F-5500-A, and Transmaster TM-15. - The pump head (liquid contact part) can be easily replaced. - The pump head is sterilizable. * * Autoclave (121°C for 25 minutes x 10 cycles) / gamma rays (25 kGy). Pumps using "Transmaster TM-15" tubes are not suitable for autoclaving.
Contributing to a bioreactor for the proliferation of hematopoietic stem cells under microgravity.
BioServe Space Technologies is a center located within the Department of Aerospace Engineering at the University of Colorado Boulder in the United States. To date, it has been involved in over 90 space missions, conducting experiments in life sciences in microgravity environments, including the design and construction of hardware. Currently, BioServe Space Technologies is developing a system called the BioServe In-Space Cell Expansion Platform (BICEP) to support the proliferation of hematopoietic stem cells in microgravity. Hematopoietic stem cells are the precursor cells for red blood cells, white blood cells, and platelets. Bone marrow transplantation, a treatment method for leukemia and cancer, involves infusing hematopoietic stem cells harvested from healthy donors into patients, allowing them to settle in the patient's bone marrow and regenerate the blood system. Additionally, when proliferated on Earth, the proportion and robustness of stem cells decrease as the culture progresses. It is believed that the microgravity environment better mimics the conditions of hematopoietic stem cells within the bone marrow, and it is expected that it will enable the proliferation of higher quality cells for transplantation.
Distributed installation type new hydraulic control pump
NC machines with hydraulic applications generally lack stability in terms of noise, heat, and performance compared to servo motor-type machines. However, hydraulic systems have the significant advantage of being compact and providing high torque, which is essential for large machines. We have resolved many of the disadvantages of hydraulics by directly connecting servo motors to a dual-rotation hydraulic pump. Since all control of pumps and cylinders (including servo flow, thrust, and position control) is performed by servo motors, handling is also easy. By adopting this new hydraulic control device, the "DDV Servo Pump," you will achieve high efficiency, with the motor capacity reduced to half, lower running costs, and less heat generation. Additionally, it significantly reduces the need for large tanks and complex centralized piping and equipment, while simultaneously improving precision and long-term stability. We encourage you to utilize this for the quietness, compactness, high performance, and cost reduction of your next-generation machines.
For long-distance transport of pharmaceuticals, additive injection, and high-pressure, pulsation-free quantitative injection.
Solving all pump-related problems and complaints from research and development to processes at once! The smooth flow pump 'PL' direct drive type provided by Takumina, a precision pump manufacturer. This pump is ideal for the long-distance transfer of water treatment chemicals and the injection of additives, offering precise supply and injection of a wide range of chemicals and fluids. It enables the inline, automation, and continuous processing that was difficult with conventional diaphragm pumps, and furthermore! Quality, productivity, and ease of use have dramatically improved. 【Features】 ■ No foreign matter contamination ■ Flow rate does not decrease due to pressure fluctuations ■ No liquid leakage ■ Does not break during dry running ■ Liquid quality does not change ■ Liquid contact parts are resistant to wear from slurries ■ Realizes inline processing ■ Easy maintenance ■ No need for dampers, accumulators, or other pulsation dampers ■ Significantly reduces causes of trouble ■ Simple piping, cost-effective & space-saving ■ Excellent responsiveness The smooth flow pump has a lineup that accommodates various usage conditions and liquids, including flow rate, pressure, liquid viscosity, discharge accuracy, slurry diameter and material, installation and transfer conditions, and costs. We will select and introduce the most suitable products for our customers, so please feel free to contact us.
We deliver safety and trust in the precise injection of various fluids, from water treatment to advanced processes and sanitary processes!
"Motor-driven metering pump" provided by Takumina, a precision pump manufacturer. In addition to excellent liquid delivery accuracy, it also boasts maintenance ease and durability, making it suitable for a wide range of industries and applications, including water treatment, wastewater treatment, advanced processes, and sanitary processes. We offer a lineup of products that can be selected according to your application and purpose! Simple pumps with excellent durability and corrosion resistance. Our lineup includes the "direct-acting diaphragm type," which responds to harsh operating environments with high corrosion resistance, as well as the "hydraulic diaphragm type" and "plunger type," which achieve stable production lines and quality through high-precision injection. [Features] - High corrosion resistance suitable for harsh operating environments - Uses molded diaphragms with excellent corrosion resistance - Usable in a wide range of settings from water treatment to production processes - Capable of transferring slurry-containing liquids and hazardous liquids (which may change when exposed to air) - High-pressure injection capability - Simple structure for easy maintenance - Excellent injection accuracy - Robust and less prone to failure We will help you select and introduce the most suitable product for your needs, so please feel free to contact us.
Injection volume control linked with external devices such as flow meters is possible! Takumina's solenoid pump 'PZi' offers excellent controllability.
The leading company in precision pumps, Takumina, presents the solenoid pump series 'PZi'. With a variety of automatic controls such as flow proportional control and batch injection, it achieves high-precision injection and a simple system. 【Features】 - Three patterns of injection volume settings available - Free power supply, AC100-240V (±10%) - Compatible with high-viscosity liquids such as polymer coagulants. - Wide range of wetted materials to accommodate various chemicals and applications. - Precision control based on actual flow rates is also possible. - Easy-to-read display panel & simple operation keys - Three-direction swivel head that can be selected according to installation location - Convenient separate head & controller for device integration - Waterproof and dustproof structure equivalent to IEC standard: IP65. - Injection volume can be set according to external analog and pulse signals. Automatic control is possible in conjunction with flow meters and level gauges. - Batch injection and interval injection settings Please feel free to contact us as we will help you select and introduce the most suitable products for your needs.
Adopts rare earth magnets! The compact body of the magnet pump 'MG' allows for space-saving design.
The leading company in precision pumps, Takumina, offers the 'MG' magnetic pump, which thoroughly pursues performance and durability. It utilizes high-performance rare earth magnets, allowing for a compact body that saves space. Additionally, it is easy to replace with products from other manufacturers. With compatible dimensions and the use of loose flanges, installation is made compatible (models 40-43). 【Features】 ■ High-performance rare earth magnets used (1.5kW and above) ■ Easy replacement with products from other manufacturers ■ Individual replacement of sliding parts is possible (models 40-43) ■ Achieves high lift (over 25m possible) ■ Impeller and magnet are integrally molded ■ All models use ETFE ■ Standard outdoor motor included (models 40-43) ■ Air vent mechanism in the rear casing prevents air lock ★ For more details, please download the catalog. Feel free to contact us with any inquiries.
