シロ産業 List of Products and Services

● Achieved a quiet design by adopting a new type of motor and new housing. ● Realized high lift by adopting a high-efficiency impeller. ● Reduced weight by using a compact motor.

● Pump that utilizes internal pressure for transfer using compressed air Ideal for transferring cutting fluids, waste liquids, solvents, etc., from drums. ● Explosion-proof type that does not use electricity This pump discharges and sucks in liquids using air pressure. Since it does not use electricity at all, it can be safely used in explosion-proof areas. Additionally, the G, AS, and SUS types come standard with a grounding wire for comprehensive static electricity measures. Please install the grounding wire at a grounded location. ● Double safety structure for peace of mind The APD safely pressurizes and depressurizes the drum. The automatic pressure relief valve (regulator) maintains a constant pressure inside the drum while preventing it from exceeding a certain pressure (0.05 MPa). The safety valve is designed to release compressed air outside the drum if the pressure rises above 0.07 MPa, ensuring that the drum will not burst, so you can rest assured.

We efficiently transfer high-viscosity oil (below 2500 cP) that has been difficult until now. The connection is a lever coupling type, allowing for easy attachment and detachment with one touch, without the need for tools. Hose extension is possible.

Can be used with AC100V, AC200V, and DC12V, capable of transferring from kerosene and light oil to high-viscosity oil. Electric pump that can be used by connecting hoses and piping.

● All PTFE handheld pump. Suitable for pure water, strong acids, and strong alkalis. ● Made entirely of PTFE, making it ideal for use in medical settings, laboratories, and semiconductor factories. ● The non-seal structure, which has no sealing parts like mechanical seals, allows for a simple design and easy maintenance.

Mobile Simple Automatic Supply Stop Device for Water-Soluble Cutting Fluid Equipped with automatic supply stop, easy management Satisfying cost-performance with rich features Can be used anywhere with a 100V power supply One-touch operation with a single button + Optionally stabilizes quality ■ Features ● Coolant concentrate is an emulsion type ● Device size (W) 860mm × (D) 560mm × (H) 900mm ● Tire size φ60mm, load capacity 150g for safe mobility ● Automatic supply and automatic stop to prevent overflow. ● Can use AC100V power supply. Usable from any machine power source in the factory ● Concentration dilution device can be added (optional) ・Variable valve allows for arbitrary concentration ratio settings ・Operates using water pressure, no power supply required ・Maintenance-free ・No need for a stirrer ■ Effects ● Labor-saving Automatically stops supply, reducing work and management time ● Waste reduction Eliminates unintended overflow and unnecessary floor cleaning tasks ● Safety assurance Establishes safe operations without carrying heavy buckets ● Cost reduction Saves concentrate with appropriate usage amount (optional) ● Quality improvement Stabilizes cutting fluid concentration, enhancing processing quality (optional)

After cleaning the waste from the cutting fluid tank and wastewater treatment tank, it is possible to collect everything from kerosene and diesel to contaminated cutting fluid in drums.

Residual liquid is only 200cc (when using kerosene). One device serves two functions. With just one lever, you can inhale and exhale. ● This single unit allows for convenient transfer of liquids in and out of drums. ● It is a safe explosion-proof type that utilizes air pressure and does not use electricity at all. ● It efficiently collects liquids ranging from low viscosity to high viscosity (up to 3,000 cP). ● Since it does not use motors, it has fewer breakdowns, and there are no obstacles in the flow path, allowing for foreign substances as well. A pump that uses compressed air to transport liquids by utilizing internal pressure and vacuum. Explosion-proof type that does not use electricity. This pump uses air pressure to discharge and inhale liquids. Since it does not use electricity at all, it can be safely used in explosion-proof areas. Additionally, the G・AS type comes standard with a grounding wire for complete static electricity countermeasures. Please install the grounding wire at a grounded location. Fewer breakdowns. Since it does not use motors and there are no obstacles in the flow path, it can handle liquids with foreign substances or with viscosities (up to 3,000 cP) without any issues. Compatible with high-viscosity liquids. It can be used for high-viscosity liquids (up to 3,000 cP) that were difficult to handle with conventional drum pumps. Of course, it also powerfully discharges low-viscosity liquids.

● Explosion-proof specification that does not use electricity Since it does not use electricity at all, you can use it safely even in explosion-proof areas. ● Usable without sealing the drum It is not a type that applies internal pressure to the drum, so it can be used without sealing the can like an air pressure pump. ● Customizable Due to the hose connection, it can be customized to fit site specifications and piping. ■ Advantages ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability

■Merits ● Continuous operation possible ● Can transfer kerosene and light oil without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise ■Features ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Equipped with a relief valve (0.1MPa) and vane pump ● Various customizations available for drum cans and hose connections. * The SUS type cannot be used with water or solvents.

100V type oil-free pump that can be easily used anytime, anywhere. It is a product that has passed the compatibility test for "electric pumps." ● The product performance is different. ● Assembly and disassembly for repairs are easy. ● Exported to countries around the world, it is mass-produced, ensuring low cost and high quality.

- Small-scale measurement and product performance differ. - Since it is an oil-less pump, no oil mixes with the cleaning water. - It is a cleaning device designed to eliminate waste, allowing anyone to disassemble, clean, and assemble it. - As it is a differential pump, it has low pulsation. - The pump is directly connected to the motor shaft, making it efficient. - The design maximizes rolling friction, resulting in low starting torque and high output. - Its compact and lightweight design makes it easy to carry. - The adoption of a U-lever cock allows for one-handed operation. - The use of an IP44 totally enclosed motor ensures it is unaffected by splashes from any direction.

■Features ●PSE (Electrical Appliance and Material Safety Law) compliant ●For IBC containers ●Power supply is AC100V ●Maximum discharge head of 5m, maximum discharge volume of 30L/min ●Standard equipped with circuit breaker (automatic stop for heat and overcurrent) *Restoration is done by pressing the breaker.

The supply tank is located at a high position, and the AdBlue in the IBC container can be divided into smaller portions by its own weight from the outlet of the IBC container.

■Merits ● Efficient transfer of high-viscosity liquids ● Safe transfer of flammable liquids ● Ideal for horizontal and high-lift transfer ● Can be used as a circulation pump due to continuous operation capability

The long-awaited flow meter integrated drum pump M58RP-PMA (for kerosene and light oil / with TB-K24-FM on the main body side) M58RP-PMNA (for kerosene and light oil / with TB-K24-FM on the nozzle side) M58RP-PM33A (for kerosene and light oil / with MK33-25D on the main body side) M58RP-PA (for kerosene and light oil) ■ Flow meter integrated You can choose from three types with flow meters: M58RP-PMA, M58RP-PM33A, and M58RP-PM33A, depending on your application. There is also a type without a flow meter, allowing for economical use of kerosene drum pumps. ■ Improvement in liquid management With the flow meter, you can see the flow rate at a glance, eliminating waste and leading to cost reduction. ■ Continuous operation possible It can be continuously operated with 100V electric power, making it usable anywhere. This also increases work efficiency.

●Standard type with excellent cost performance ●Equipped with a hand valve as standard ●Achieves a discharge capacity of 80 l/min

Measuring and stopping are standard! Cost reduction through usage management! Pursuing reasonable prices The long-awaited flow meter integrated drum pump ● Flow meter integrated You can choose from three types with flow meters: M58EPA-ATN, M58EPA-ATNK24, and M58EPA-M33-ATN, depending on your application. There is also a type without a flow meter, allowing for economical use of kerosene drum pumps. ● Electric type for kerosene and light oil with auto-stop gun preset Automatically stops discharge when the liquid is full, preventing overflow. ● Improvement in liquid management With the flow meter, you can see the flow rate at a glance, eliminating waste and leading to cost reduction. ● Continuous operation possible With electric 100V, it can operate continuously, making it usable anywhere. This also increases work efficiency.

Can be connected if the IBC container connection port is of the cam lock or ball valve type. AdBlue compatible Includes gun nozzle *IBC container sold separately.

● A dedicated pump for 200L drums suitable for AdBlue (urea solution). ● Usable with urea solution, diesel, kerosene, antifreeze, and water. ● Can be directly attached to the cap of an IBC tank (1000L) with a G2 thread standard. ● Can be used in places without household power supply (AC100V) by using a DC12V battery.

Can be used without sealing the drum. Since it is not a type that applies internal pressure to the drum, it can be used without sealing the can like an air pressure pump. Air-operated is safe even in explosion-proof environments. Since the power source is compressed air from a compressor, it can be safely used in explosion-proof areas. *If you are concerned about static electricity, please ground a separate grounding wire.

Can be used without sealing the drum. Since it is not a type that applies internal pressure to the drum, it can be used without sealing the can like an air pressure pump. Air-operated is safe in explosion-proof environments. Since the power source is compressed air from a compressor, it can be safely used in explosion-proof areas. *If you are concerned about static electricity, please ground a separate grounding wire.

Can be used without sealing the drum. Since it is not a type that applies internal pressure to the drum, it can be used without sealing the can like an air pressure pump. Air-operated is safe in explosive environments. Since the power source is compressed air from a compressor, it can be safely used in explosive areas. *If you are concerned about static electricity, please ground a separate grounding wire.

●Stainless steel (304) ●Adapter ●Teflon packing specification ●Ball valve ●Hose (φ20×2m) ●With grounding wire Can be used without sealing the drum. The liquid contact parts are made of stainless steel and Teflon, allowing use with various solvents and chemicals.

Advantages of Separate Type ● Discharges a larger volume of high-viscosity liquids. ● Safe for use in explosion-proof areas due to its air-operated mechanism. ● Simple structure makes cleaning easy and reduces the likelihood of malfunctions. ● The sanitary version allows for easy disassembly and cleaning! Very few malfunctions! The structure of the contact parts is extremely simple. Only the pipe and hose sections can be removed for disassembly and cleaning. The sanitary type also employs a hygienic fitting, allowing for disassembly and cleaning without tools. ● Peace of mind in explosion-proof areas Air-operated drive source that does not use electricity, with a grounding wire standard on stainless steel types. ● Available in various materials such as aluminum, stainless steel, sanitary type, and plastic, allowing for selection based on the liquid.

●MD58A-100 Series ○ There is a 100V type, which is a popular pump for kerosene and diesel. ○ There are types such as MD58A-100K24A with a flow meter for kerosene and diesel, and MD58A-100ATNK24A with an auto-stop gun. ○ Rated for 30 minutes ●MD58-FCA ○ It is an explosion-proof pressure-resistant structure defined by the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). ○ It can discharge one drum in just 3.5 minutes and can operate continuously for 24 hours (when used as a standalone pump). *Regarding hazardous solvents and chemicals (such as toxic substances)... Please do not use any liquids other than those indicated for the intended use. Additionally, please ensure thorough management of hazardous materials on your part, and if necessary for responsible personnel, please manage according to regulations.

●MD58FC103-NA・MD58FC104-NA ○ Comes standard with a 2m hose and a gun nozzle at the tip, allowing for easy dispensing of the right amount during portioning, making it extremely user-friendly. ○ Simply place the adapter on the drum can. (Compatible with both copper and plastic drum cans) ○ A powerful pump with a discharge capacity of 80L/min (at 1cP) and a lift height of 16m (for clean water). ●MD58HC-100A ○ An explosion-proof pressure-resistant structure that meets the explosion-proof grade specified by the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). ○ Dispenses one drum in just 3.5 minutes and can operate continuously for 24 hours. (For the pump alone) ○ Since the main body is made of aluminum, it is not recommended for use with solvents that can corrode aluminum.

- It is capable of handling general oil VG400 and gear oil SAE140 at 15℃. - The power supply comes in three types: AC100V, 200V (single phase), and DC12V. - With a high discharge pressure of 0.45MPa, the discharge volume does not significantly decrease even at high altitudes or long horizontal runs. - Kerosene and light oil can also be used. - The continuous usage time is 20 minutes. Please be careful as it may overheat if used for longer than that. - There is also a large capacity type (MD58V-100HA) that can pump oil up to 1,000cP at a high speed of 30L per minute.

● This is a single-phase 100V type. ● It is a self-priming vane pump made of cast iron. ● It has a built-in relief valve and a 400μm filter, allowing for safe use.

■Features ●Large capacity with a discharge rate of 60L/min ●Lightweight and compact design ●Continuous operation is possible ●Handy pump allows for easy relocation ●Flexible hose connections and piping

With drip control function Discharge flow rate: 30 to 200 ml/min

● Safe and secure as it is a non-fuel air motor type ● Dedicated to JIS standard 200L closed drums (large plug G2) ● For low viscosity solvents (below 100cP) ● For dispensing only: Dispensing volume 20L/min (with nozzle) ● The motor head can be replaced The head (motor) part is easy to detach and can be replaced from air motor type to electric type. ● M58CEM1-V has a ball valve specification By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● M58CEM1-N comes with a manual gun nozzle The gun nozzle can be easily and conveniently operated with one hand. Squeeze to dispense, release to stop.

M58CEM1-20SUSA (for solvents) M58CEM1-V20SUSA (for solvents / with ball valve) M58CEM1-N20SUSA (for solvents / with gun nozzle) ● Continuous operation possible ● Lightweight and compact body ● Inexpensive