シロ産業 List of Products and Services

● It enables accurate vibration monitoring with a compact, low-cost design and a maximum of two levels. ● Vibration modes can be selected internally via a switch for acceleration, velocity, or displacement. ● The housing features a drip-proof aluminum structure, and cables can be secured with a cable gland (equivalent to IP64). ● Alarm level settings can be adjusted in 1% steps within a range of 1% to 99% using an internal digital switch. ● An alarm delay of up to 60 seconds can be set to prevent false alarms. ● It can monitor vibrations in rotating machinery, plant equipment, large structures, and more.

It has an automatic power-off feature, which is very convenient for saving battery life. Data output is also possible, making it ideal for data analysis and editing.

It is easy to measure with the auto-range feature. Equipped with a separate sensor, it becomes easier to hold during measurement.

Using a piezoelectric accelerometer, the vibration signal is converted into an electrical signal, and after analyzing the input signal, the data values of vibration acceleration, velocity, and displacement are displayed. It can be measured in dark places with a backlight. It is used in fields such as machinery manufacturing, electrical power, and automobile manufacturing.

● Waterproof and weather-resistant IP67 case / Long-lasting battery type [approximately 1 year (once a day)]

The USB digital vibration meter accelerometer has a built-in signal conditioner and AD converter in the sensor, allowing for easy vibration measurement simply by connecting it to the USB port of a PC or tablet. The sensor inside the case uses a piezoelectric accelerometer, enabling high resolution measurements across a wide frequency range. The M2983-333D01T piezoelectric USB digital vibration meter accelerometer can be utilized for vibration measurement in various applications.

Dustproof and waterproof function Built-in magnet for device fixation Built-in sensor response frequency of 1000Hz Your computer can be utilized.

Simultaneous measurement of instantaneous values and time-weighted levels, time-averaged levels, maximum and minimum values of vibration levels and vibration acceleration levels in three directions. It is also compatible with the vibration measurement manual. ■ Upgraded features from conventional products ● Simultaneous measurement of vibration level (Lv) and vibration acceleration level (Lva) ● Supports large-capacity SD cards up to 32GB (Measurement data can be output in CSV format, compatible with spreadsheet software like Excel) ● Additional features through optional programs ● Long-duration continuous data automatic recording comparator output function Simultaneous real-time analysis of 1/3 octave bands in three directions and simultaneous waveform recording ● Communication with computers via USB port and I/O port ● USB storage compatible (Recognized as a removable disk) ● 27 hours of measurement with AA alkaline batteries or nickel-metal hydride rechargeable batteries ● Dust and water resistance rating IP54 (main unit)

You can understand how the transported goods are handled by recording data on acceleration, temperature and humidity, latitude and longitude, and altitude. ■Overview Equipped with a super compact 3-axis accelerometer, temperature and humidity sensor, and GPS module, it can record data on acceleration, temperature and humidity, latitude and longitude, and altitude independently (standalone) for about one week (with a 1ms sampling rate) using two AA alkaline batteries. The recorded data can be easily transferred to a computer via the built-in USB port, and can be instantly displayed in graph form using the standard accompanying software. Additionally, by connecting the included GPS antenna, the transport route can be recorded (which varies depending on the positioning conditions of the GPS module), and the location information of the transport route will be displayed on a map (within Japan only) along with the acceleration data.

● Speed: 0.5 to 199.9 mm/s ● Acceleration: 0.5 to 199.9 m/s² ● Displacement: 1.999 mm

● Wide range of measurements possible up to a frequency of 5KHz ● For measuring vibrations of machinery and equipment ● Comes with a data logger for data management on a PC ● Data can be saved in Excel format

●Simultaneous display of 2 channels ●Vibration measurement of machinery and equipment ●Equipped with a data logger for data management on a PC ●Data can be saved in Excel format

● Speed (mm/s) Acceleration (mm/s²) ● Data hold, MAX/MIN/MIN hold ● SD card compatible

This is a compact and low-cost shock acceleration timer equipped with a 3-axis (X, Y, Z) accelerometer. Each of the four types records the number of times and the elapsed time that exceed the specified threshold. The number of times and the elapsed time that exceed the threshold are displayed on the LCD panel. You can start recording and check the recorded content using the function switch on the main unit. It is a simple G-shock timer that only allows you to "record" and "view."

The M1552V-300** detects vibrations in the main parts of rotating machinery such as transmitters and generators using a small pickup (vibration detector) and continuously monitors them. When the magnitude exceeds a pre-set value and duration, it issues individual alarms for both alarm and trip conditions. Alarm settings can be individually configured for alarm and trip levels using an adjuster within the sealing pocket. Additionally, it is equipped with standard AC and DC outputs, along with a DC 4-20mA output, allowing for various applications such as monitoring, waveform observation, and level recording through connection to a computer.

Application for machine vibration monitoring in all industries. Vibration levels are a useful guide to machine condition. Poor alignment and looseness in structures increase vibration levels, which is a sure sign that maintenance is needed.

● Three-axis accelerometer and three-axis gyroscope integrated into one package (six-axis motion sensor) ● Compact and lightweight (W23×D12×H5, approximately 3g) ● Low height allows for installation in tight spaces

■Key Points In trigger measurement mode, measurement can be automatically started at any desired timing. Ideal for measuring predetermined takt times for robots and similar applications. Achieved a sampling period of 0.05 msec (sampling frequency of 20 kHz) in logging mode. Up to two external sensors, the manufacturer's 3-axis accelerometer MA3 series, can be connected. Resolution has improved from 10 bits to 12 bits. Continuous operating time has increased from approximately 10 hours to approximately 24 hours.

Binaural receiver sound scope (160–1140mm)

● High-performance IC circuit built-in for high sensitivity ● Ultra-compact and lightweight for easy portability ● Rod sensor included as standard

This is a portable low-frequency vibration meter in a handy size, capable of measuring from 2 Hz. ● It is a vibration meter developed for measuring low-frequency vibrations. ● Its compact and lightweight design makes it convenient for on-site measurements. ● It can measure acceleration, velocity, and displacement. ● The built-in filter allows for the analysis of vibration frequencies.

This is a vibration monitoring sensor that converts vibration levels into a 4-20mA signal with high precision detection. It is ideal as a vibration sensor for realizing IoT in equipment management. ● Optimal for building a low-cost and simple vibration monitoring system ● Proven track record in continuous monitoring of rotating machinery such as motors, pumps, fans, and compressors.

This is a vibration sensor that allows anyone to easily measure vibrations anytime. ● Built-in 3-axis accelerometer ● Easy vibration measurement for anyone, anytime ● Accurately measures slow vibrations ■ Main Features 1. Compact and lightweight, easy to carry Achieves a palm-sized dimension of 62.4 (W) × 36.2 (H) × 46.2 (D) mm and a lightweight design (approximately 100g). 2. Simple measurement Equipped with a small display and memory in the main unit, allowing measurement with just the palm-sized body (external USB power supply required). 3. By collaborating with a Windows PC, more detailed analysis of measurement data is possible. ■ Easy vibration measurement for anyone, anytime Have you previously relied on specialized companies for vibration measurement of manufacturing equipment? As a result, it was costly, and it took time to receive the vibration analysis results. The wireless micro-vibration data logger (with built-in 3-axis accelerometer) "M4012MB-3AS" allows you to easily measure vibrations in-house without needing to rely on specialized companies. Furthermore, by using dedicated Viewer software, on-site personnel can check the results on the spot.

- This is a vibration meter with ISO severity judgment functionality designed for technicians responsible for the daily maintenance of equipment. It is calibrated for sensitivity using a standard calibrator (159Hz, 10m/s²) at the time of shipment, so you can use it with confidence. - Easy and simple measurements for anyone - Compact and reachable even in tight spaces - Quick measurement/judgment (within 1 second) - Constant adjustment of pressing force during measurement - Achieves high-quality measurements without individual differences - Equipped with ISO severity judgment functionality - Immediate judgment with four levels of color coding

● Easy data utilization with SD card support (Excel data) ● Sampling interval can be certified from 1 second to 3,600 seconds ● Stationary measurement possible with rear stand

●Vibration measurement of machinery and equipment ●Measurement of vibration velocity and acceleration

●Resolution of 0.005 m/s² (0.5 gal) ●Calibration certificate compliant with ISO standards can be issued ●Includes user-friendly software for elevator ride comfort analysis (in Japanese/English) ●Equipped with a 3.5-inch color LCD, waveform can be confirmed on the main unit

● The grinding sound during fine processing such as jig grinding and molding grinding can be accurately heard. ● It is possible to check the bearing sound and abnormal sounds of rotating machine parts.

For vibration detection, a compact and lightweight piezoelectric pickup is used to detect vibration acceleration, and an electrical method is employed to obtain velocity and vibration displacement. This vibration meter is designed from the user's perspective and demonstrates its effectiveness in field measurements for maintenance inspections and quality control of all industrial machinery, including machine tools, aircraft, electric motors, and compressors.

It is compact and lightweight, making it convenient for on-site measurements. Additionally, it features a large analog display, allowing for easy visibility of even the minute vibrations that change constantly, and it is very simple to operate. It also has a built-in integration circuit, enabling measurements in three modes: acceleration, velocity, and displacement. Designed with the user in mind, this vibration meter demonstrates its effectiveness in on-site measurements for maintenance inspections and quality control of all industrial machinery, including machine tools, aircraft, electric motors, and compressors.