シロ産業 Product Lineup

Non-contact phase detector that can be safely measured over the insulation of electric wires ■□■Features■□■ ■Ability to check for the presence or absence of phases and confirm the grounded phase during delta connection ■Compatible with wire sizes from 2mm² to 325mm² (IV) (outer diameter finish φ2.4mm to 30mm) ■Check phase sequence and absence of phases with LED and buzzer ■Automatically recognizes the grounded phase during delta connection and displays it with LED blinking ■Equipped with a magnet for installation inside distribution boards ■Wide measurement voltage range of three-phase AC from 70 to 1000V ■LED lighting function for clear visibility even in daylight ■Complies with international safety standards IEC 61010-1 CAT.IV 600V, CAT.III 1000V ■For other functions and details, please download the catalog or contact us.

A micro low potential measuring device capable of measuring low potential static electricity that can cause electrostatic destruction. ■□■ Features ■□■ ■ Capable of measuring static electricity below 100V with high precision, which was difficult with conventional models, and can measure from 0.1V. ■ Newly added range switching function allows for the measurement of micro potentials. ■ By shortening the measurement distance, the measurement area is narrowed, enabling measurement of an area approximately 20mm square, allowing for high-precision measurement of the surface potential of small electronic devices. ■ The display and detection units are separated, allowing for measurements in narrow spaces, with the ability to view measurement values at hand. ■ Capable of measuring small electronic components as well as potential distribution of wide items. ■ Switchable between peak hold measurement and continuous measurement. ■ Built-in detection sensor failure diagnosis circuit, which displays in case of failure (patented). ■ Equipped with a sleep mode function to prevent battery drain due to forgetting to turn off the power. ■ For more details, please download the catalog or contact us.

Using a tip detection part with minimal sensitivity difference in bare and covered conditions ● Can detect voltage even over the cable ● Excellent fit with a new design ● Used by professionals in electrical work ● Built-in new integrated circuit ● Available in three color options ● Management classification possible by color (department, person in charge, year)

Electronic devices and metal tools held by humans have individual capacitance to ground and are charged at the potential of the human body. When the charged electronic device touches the ground or the metal tool touches the electronic device, a transient current with a high peak current flows rapidly, causing a malfunction. By using a human body potential meter, it is possible to accurately measure the potential of the human body and instantly determine whether the electronic device will be damaged at that potential. Additionally, it is possible to know to what extent measures against static electricity, such as conductive flooring, anti-static mats, anti-static shoes, and wrist straps, can reduce the human body potential.

Measuring ultraviolet intensity is the most important item for managing the performance of ultraviolet inspection lamps, and it is specified by ASTM and JIS. For measuring ultraviolet intensity, please use the ultraviolet intensity measuring instrument M667V-363M, which is traceable to national standards.

● Detect high voltage with a safe distance. ● Detect low voltage with a compact design.

● Japanese menu support ● Frequency range: 9kHz to 7.5GHz ● Minimum -161dBm displayed average noise level (DANL) ● Minimum < -98dBc/Hz @ 10kHz offset phase noise level ● Noise level measurement accuracy ±0.8dB ● Minimum 10Hz resolution bandwidth (RBW) (for frequency range up to 7.5GHz) ● Built-in tracking generator ● 8-inch WVGA (800×480) display

Everything necessary for measurement is included, so you can easily perform four types of measurements.

● The measurement range is extensive, making it ideal for surface resistance measurement of various materials (RTT, RTG). ● The automatic range switching function eliminates the hassle of manually switching measurement ranges each time. ● By using optional probes, measurements can be tailored to specific applications.

AC and DC voltage, DC current, resistance, capacitance, temperature, battery, diode forward voltage drop, transistor hFE parameters, on/off of the beep circuit, and square wave output can be measured.

AC voltage detection range 50V to 1000V with adjustable sensitivity.

The digital multimeter is a 20000 count digital multimeter equipped with frequency testing, a large 60mm×54mm LCD display, and an input impedance of over 10MΩ. It measures DC and AC voltage, as well as DC and AC current. Manual range: supported. Data hold function. Supports diode, continuity buzzer, transistor, frequency, and temperature testing. Display count: 2000.

● The automatic selection of function/range makes operation easy. ● The true RMS method displays the effective value even for non-sinusoidal waves. ● Equipped with a non-contact voltage detection function, it serves as a clamp meter, tester, and voltage detector all in one. ● Features a backlight that makes the display easy to see even in dark places.

● A handheld clamp meter equipped with AC current measurement, non-contact voltage detection, low-pass filter, and inrush current mode. ● AC current automatically sets the optimal range.

● A handheld clamp meter equipped with AC and DC current measurement, non-contact voltage detection, low-pass filter, and inrush current mode. ● Automatic detection/switching of AC/DC current with automatic setting of the optimal range.

● A multimeter that covers a wide range. ● Supports DC current (μA) measurement as well.

● Products compatible with measuring ground resistance and ground voltage. Suitable for distribution lines, indoor wiring, electrical machinery equipment, and grounding copper rod installation sites. ● The ground resistance measurement function supports both precise "three-wire" measurements and simple "two-wire" measurements. Measurement ranges of x1, x10, and x100 can be selected. The maximum measurable resistance is 1200Ω. ● The ground voltage measurement function can measure up to a maximum voltage of AC30V. ● Equipped with an LED to confirm correct grounding conditions. ● Includes a backlight for measurements in dark places.

● Lightweight and compact size ● Four measurement modes (AUTO, Hi, Low, Ionbalance) ● Easy detachable ion balance plate ● Power auto-off / Continuous measurement selectable ● Measurement data output as analog voltage

■Features ●Handheld probe complies with the safety standard IEC61010-031 (revised version) Test leads with short-circuit prevention caps. They can be removed considering traditional applications. ●Measurement categories To safely use measuring instruments, IEC61010 classifies safety level standards into categories CAT1 to CAT4 based on the usage location.

● The large display makes the numbers easy to read. ● It can be used in dark places because it has a backlight. ● By adopting measurement markers, the measurement distance can be kept constant. This reduces errors due to measurement distance.

● This product allows for the measurement of decay time by applying it to a metal plate, and checks the deionization performance as CPM. ※ Decay measurement patterns (2 types) ±1000V → ±100V, ±1000V → ±50V ※ Measurement values may not necessarily match IEC standard values. ● Compact and handheld, making it convenient for checking ionizers on-site. ● Equipped with a rotary head, it features a unique swivel function that allows for measurement while changing the orientation of the plate, making it very useful for checking ionizers installed on devices. ● Easy operation: With simple operation buttons, measurements can be taken quickly and accurately. ● Bright and large LCD display: The large LCD display makes it easy to see even in work environments.

- Maximum measurement current AC1000A - Tear-drop shape convenient for measuring in complicated wiring - Diameter of the conductor to be measured φ33mm - Multifunctional design with AC/DC voltage and resistance ranges - Minimum resolution 0.01A - Safety design compliant with international safety standard IEC61010-1 CAT. III ■ Method for measuring current Open the tip of the current sensor and clamp only one side of the conductor to be measured, then read the indicated value. Ensure that only one side (one wire) is clamped. ■ Method for measuring voltage Contact the measurement leads with the circuit to be measured and perform the measurement.

For signal measurement in process instrumentation and building automation.

Access to Android apps via wireless communication functionality *Please note that measurements can be made with multiplexing, sharing, and structural grounding, but measurements with standalone grounding are not possible.

This product is a measuring instrument capable of checking miswiring of grounded outlets. ● It can determine miswiring of live wires between N-E (Neutral-Earth), which was previously difficult. ● It measures a current (approximately 10 mA) that does not trip a leakage breaker of 30 mA or more, even with N-E miswiring. ● Normal/miswired conditions are indicated by LED (green/red) lamps and a buzzer. ● An LCD display clearly shows the miswiring situation at a glance. ● Voltage measurement (between L-N) and grounding resistance measurement (between N-E). ● The LCD backlight automatically turns on with a light sensor, supporting measurements in dark places. ● The included conversion adapter allows compatibility with 3-prong/2-prong outlets.

■Features ● Capable of recording leakage current, load current, and power quality (MB23LG-5020K) (Power quality: reference voltage, voltage swell, voltage dip, voltage momentary interruption) ● Recorded data can be downloaded to a PC via USB connection, and analyzed and graphically displayed using the included software ● Voltage and current changes can be simultaneously monitored on a PC screen (MB23LG-5020K) ● LED flashes when detection values exceed limits (supports trigger, capture, and power quality recording modes) ● Comes with easy-to-use Soft 2 ● Simple measurement of electrical energy is possible with the calculation function of Soft 2 ● Equipped with recording modes that support various measurements: normal, trigger, capture, and power quality (MB23LG-5020K) ● Capable of recording a large volume of data (60,000 entries) when using 1 channel ● Continuous usage time: approximately 10 days (when using alkaline batteries) ● Equipped with a low-pass filter to cut high-frequency components