シロ産業 Product Lineup

● Japanese menu support ● Frequency range: 9kHz to 7.5GHz ● Minimum -161dBm displayed average noise level (DANL) ● Minimum < -98dBc/Hz @ 10kHz offset phase noise level ● Noise level measurement accuracy ±0.8dB ● Minimum 10Hz resolution bandwidth (RBW) (for frequency range up to 7.5GHz) ● Built-in tracking generator ● 8-inch WVGA (800×480) display

●Resolution: 2,200,000 counts ●Voltage accuracy: 0.0035% DC ●Maximum measurement speed of 10 krdgs/s ●Maximum current measurement range of 10 A ●Built-in cold junction compensation for thermocouples: supports 3 types of temperature sensors - TC, RTD, THERM ●Simultaneous display of 2 measurements ●Real-time trend and histogram display function ●User-defined Any Sensor function with Ultra Sensor PC software ●Command compatibility with mainstream DMMs ●Interface: USB host & device, RS232, GPIB, LAN (LXI)

●MS2685DP-832A/MS2685DP-832: 3 channels, maximum total power 195W ●MS2685DP-831A/MS2685DP-831: 3 channels, maximum total power 160W ●MS2685DP-821A/MS2685DP-821: 2 channels, 60V/1A, 8V/10A maximum total power 140W, with remote sensing ●MS2685DP-811A/MS2685DP-811: 1 channel, 2 ranges 40V/5A or 20V/10A maximum total power 200W, with remote sensing with real panel output terminals ●MS2685DP-712/MS2685DP-711: 1 channel, maximum total power 150W ●Low ripple/noise: <350μVrms/2mVpp ●Excellent output voltage stability against power supply variations and load variations ●Fast transient response time: <50μs ●Standard OVP/OCP/OTP protection functions

●Resolution: 240,000 counts ●Voltage accuracy: 0.015% DC ●Maximum measurement speed: 123 readings/second ●Maximum current measurement range: 10A ●Built-in cold junction compensation for thermocouples: TC type temperature sensor support ●Simultaneous display of 2 measurements ●Real-time trend and histogram display function ●User-defined Any Sensor function with UltraSensor PC software (optional) ●Compatible with mainstream DMM commands ●Web remote control support ●Interfaces: USB host & device, RS232, GPIB (MS2685DM-3058), LAN (MS2685DM-3058)

●Frequency bandwidth: 200MHz, 100MHz, 70MHz ●Maximum sample rate: 2GSa/s ●Maximum equivalent sample rate: 50GSa/s (M2685DS1204B) ●4-channel independent knobs ●Maximum record length: 16k points ●Diverse trigger functions ●Waveform record & replay function ●Built-in FFT and digital filter ●Pass/fail test function ●External trigger input ●Interface: USB host & device, LAN (LXI), PictBridge support

● Using independently developed technology, voltage measurement between the target cable and ground is possible just by clamping it. (*1) ● Additionally, current can also be measured simultaneously without contact. ● The roles of a clamp and a tester are combined in this one device.

● Easy measurement distance adjustment with cross mark LED ● Maximum value (peak value) display / pause display available ● Good visibility backlight even in dark places ● Tripod mountable

Professional work done quickly with reliable Japanese quality. A tough clamp meter that doesn't mind the usage environment. Increased jaw strength, wide operating temperature range, dustproof and waterproof, CAT IV 600V, high voltage measurement. Passed numerous durability tests, allowing for safer and more secure use.

There is a large switch that emphasizes operability. It can be applied over a wide range.

●With backlight ●5 range measurement ●Wide range measurement possible

It can be applied over a wide range. ● Measurement method can be switched between 2-wire and 3-wire ● Grounding screws: 2 ● Grounding lines: 5

High Voltage Insulation Resistance Tester

Exposure blocker 230V +10%-15% 50Hz

● There are no reading errors due to parallax in digital mode. ● The "loading mechanism" stabilizes measurement conditions such as the tilt and application speed of the torque driver, eliminating reading errors. ● With a wide measurement range, it can accommodate multiple types of torque drivers with just one unit. ● It has a pass/fail judgment function. The display color changes to white/red/blue, making it easy to distinguish at a glance. ● The power supply can be AC100V to 240V or a battery pack (optional). ● There are production records for American units (such as lbf·in) for the Japanese domestic aircraft industry and for export to the United States, as well as metric specifications (such as kgf·cm) for export to Asia. ● A data input tool called "ExRcv (Excel Receiver)" that enables data management with Excel(R) is available for free download. *Excel(R) is a registered trademark of Microsoft Corporation.

This is a new design, safe and reliable high-sensitivity, non-contact AC voltage detector. The AC voltage detection range is 50V to 600V.

【Multifunction Measurement】 It can perform tests for DC current, DC voltage, AC voltage, AC current, resistance, capacitance, diodes, frequency, and continuity testers, ensuring accurate measurements. 【Large Screen】 Displays more accurate and clear readings on a 3 3/4 digit LCD screen. 【Energy Saving】 Features such as data hold, automatic power off, low battery indication, polarity indication, and range indication provide user-friendly functionality, ensuring a more accurate measurement experience.

It measures true RMS values of signals at various frequencies (VFC). It can measure large capacitance up to 100 mF. It can measure variable frequency drive (VFD) measurements and stabilize high-frequency interference signal voltage or current conditions. With RMS measurement, data hold, relative value measurement, maximum/minimum, voltage hints, and automatic backlight shutdown function, it has become a new generation of excellent performance.

It features a 46-segment high-resolution analog bar display and a bandwidth of 10kHz. It has full-range overload protection. Measurement data can hold REL and peak values. It includes low battery indication, backlight, and sleep mode. It has true RMS functionality and is used for resistance, diodes, circuit continuity, capacitance, frequency, hFE, and electromagnetic induction.

The M2700T-682T wire tester consists of a transmitter and a receiver, allowing you to trace Ethernet/telephone/power cables without breaking insulation. The M2700T-682T is capable of troubleshooting Ethernet cables and is a recommended tool for electronic systems, communication cables, and audio/video cables.

● Non-contact measurement of weak direct current (0-3mA, 0-300mA) ● Accuracy ±1% F.S ● Compact and lightweight (approximately 25g) ● Capable of monitoring the status of instrumentation signals (DC4-20mA) and detecting anomalies ● Capable of detecting leakage in equipment ● Capable of detecting disconnections ● Capable of detecting aging changes in solenoid electrical devices ● Capable of monitoring the status of DC relays ● Capable of monitoring the field of valve motors ● Capable of detecting the field current of valve motors ● Standard equipped with permalloy shield ● Improved noise transfer (M631DC-3mA-D2T series)

AC and DC voltage, DC current, resistance, capacitance, temperature, battery, diode forward voltage drop, transistor hFE parameters, on/off of the beep circuit, and square wave output can be measured.

AC voltage detection range 50V to 1000V with adjustable sensitivity.

The digital multimeter is a 20000 count digital multimeter equipped with frequency testing, a large 60mm×54mm LCD display, and an input impedance of over 10MΩ. It measures DC and AC voltage, as well as DC and AC current. Manual range: supported. Data hold function. Supports diode, continuity buzzer, transistor, frequency, and temperature testing. Display count: 2000.

● Easily identify LAN, coaxial, control, and power cables from the surface of the insulation. ● Safe, secure, and easy operation Non-contact transmission and reception allow for exploration from the surface of the insulation, significantly reducing work time. ● Terminal identification can be done simply by clamping onto the distributor. ● Work can be done with the breaker as is Compatible with all cables from 0V unenergized lines to 300V live wires.

■Features ● Easy to diagnose as it displays sample waveforms of common accident points for comparison ● Distance between two faults can be determined ● Cable laying can be measured directly with a connection at only one end ● Compatible with all metal cables up to 6 km in length ● Reliable waterproof performance (IP67) for use even on rainy days

Reception sensitivity adjustment function: You can adjust the reception sensitivity of the signal. LED reception display: Signal strength is clearly indicated by LED lights. Special speaker: Dedicated speaker ensures clear sound quality.

●Equipped with a highly durable hydraulic pump and a robust cylinder, it ensures safe and comfortable lifting. ●It features a user-friendly design that compactly integrates the hydraulic pump and cylinder into a high-rigidity frame. ●Features of the fast-forward device It comes with a hydraulic fast-forward device that automatically adjusts the lifting pitch based on the weight of the load.

● Measurement of the I-V curve of solar modules ● Quality control in the production line of solar modules ● Installation sites and maintenance of solar modules

●With logger function ●Simultaneous display of impedance, voltage, and clock ●Measurement frequency: 1kHz ± 30Hz ●Resistance value: 0.01mΩ to 40Ω ●Voltage: 1mV to 40V

Ensuring "food safety" is greatly dependent on environmental testing during the manufacturing process. Many food incidents are caused by the contamination of microorganisms, foreign substances, and allergens during production. Relying solely on raw material and product inspections conducted through random sampling is not sufficient for adequate management. Even in the HACCP system, which is being promoted in Japan, the importance of general hygiene management is emphasized, particularly the enhancement of OPRP based on scientific evidence (see below). ATP measurement devices are products that allow on-site verification of whether cleaning processes are being carried out correctly, enabling prompt and appropriate countermeasures. We offer a product lineup using indicators such as ATP and protein, allowing for differentiation based on purpose and application.

Electrical work, automotive electrical tasks, and safe simple checks of live (energized) and dead (de-energized) lines during electrical equipment maintenance using "visual" and "auditory" methods. Featuring a lightweight pen-shaped design inspired by German design, it offers excellent portability for pocket storage.

■MB23K-2000AK Features ● Comes with a new reinforced protective bushing ● Capable of measuring AC/DC currents up to 60A with an open core type clamp sensor ● Measurable conductor diameter approximately φ6mm ● Display with a 3400 count bar graph ● Convenient pocket size for storage ● Shock-resistant holster case ● Minimum resolution AC/DC 0.1A ● Tip pin length 18mm ■MB23K-2001AK Features ● Comes with a new reinforced protective bushing ● Capable of measuring AC/DC currents up to 100A with an open core type clamp sensor ● Measurable conductor diameter approximately φ10mm ● Display with a 3400 count bar graph ● Convenient pocket size for storage ● Shock-resistant holster case ● Minimum resolution AC/DC 0.1A ● Tip pin length 18mm

■Reliability High accuracy and assurance guarantee Accuracy: 0.09% + 2rdg in DCV range 0.5% + 5rdg in ACV range (at 50/60Hz) The basic detection method adopts true RMS Only the TY530 allows switching between RMS and average values Product warranty is 3 years ■User Calibration Function Adjusting the DMM required removing the outer case for volume adjustment. With a special operation on the front panel, easy and reliable adjustment work can be performed. Additionally, adjustments for frequency characteristics of AC voltage and AC current, which were previously impossible to auto-calibrate, can now be done with one-touch calibration thanks to new technology. The user calibration function contributes to improved work efficiency and cost reduction. Various sensor output signals (DC/ACmV) can be scaled as desired, and units can also be changed. (Units can be selected from 16 types) The display features a dual display, allowing simultaneous confirmation of output signals and scaling values. - The newly adopted frequency characteristic correction circuit is currently under patent application. - A separate calibration standard is required.

●Reliable identification of target lines You can instantly search for only the target line among numerous cables. ●Accident detection is also possible Pinpoint detection of disconnections, short circuits, and ground faults. ●Identification of RST and L1/L2 is also possible You can confirm the RST phase sequence and check the polarity of L1 and L2. ●Exploration of hidden wiring routes High performance with a maximum range of 3m and a maximum distance of 7km, capable of exploring walls and ceilings. ●Detection of breakers and wiring routes compatible with terminals No need for short circuits or power supply at the terminal. ●Supports from unpowered lines to live lines up to 600VAC Automatically identifies the target line accurately with a microprocessor. ●Safe exploration without metal contact using clamp transmission* Safe for all data lines, including LAN and control. *Requires non-contact transmission clamp (optional).

● It can be powered by both dry batteries and an AC adapter. ■ Introduction This manual explains the handling precautions and usage of the Tesla meter for operators. It contains important information that should be followed to prevent harm to customers and others, as well as damage to property, ensuring the safe use of this product. Any malfunctions or troubles arising from improper handling of this product are not covered by the manufacturer's warranty. Thank you for your understanding. ■ Product Overview ● It is compact, lightweight, and easy to operate, with a large digital display that is easy to read, making it suitable for use in many locations. ● It offers two measurement ranges: 0.0 to 200.0 mT and 0 to 2000 mT, allowing for high-precision measurements across a wide range, including high magnetic field measurements. ● The power supply can use a 006P type stacked dry battery (DC9V) or the included AC100V adapter. ● The peak hold function makes it easy to measure maximum values. ● It can measure both DC magnetic flux density and AC magnetic flux density. ● Probes can be replaced without calibration. ● The auto power-off function helps prevent unnecessary battery drain.

This is an easy-to-use cable tester that verifies the integrity of metal cables commonly found in industrial voice/data and video equipment, including telephone wiring, data networks, and video/security cables, both domestically and commercially. The M749GM-9111G incorporates cutting-edge technology and offers features not available in previous cable mappers. Its advanced wire map engine instantly and accurately displays complex wiring faults, and the TDR (Time Domain Reflectometry) detects fault locations, enhancing on-site productivity.

● It can be installed on the manufacturing line for real-time measurement of electrostatic potential. ● The compact design of the sensor head allows for flexible installation locations. ● It supports various output formats, including analog output, RS232C output, and Wi-Fi output (Wi-Fi function available as an optional specification). ● Power specifications can be selected at the time of purchase between AC adapter type and DC 24V input type.

■Efficient deterioration diagnosis of UPS and lead-acid batteries with measurement record voice guidance ●Measurement records with navigation voice guidance ●Efficient data management profile ●Fastest measurement to record in 2 seconds 1: Accurate deterioration diagnosis of lead-acid batteries using proprietary technology This is a standard device that supports the deterioration diagnosis of UPS and lead-acid batteries. By measuring the internal resistance and voltage of the battery using the impedance method, diagnosis can be performed while the battery remains connected to the device in an uninterrupted state. Even in environments where noise occurs, accurate measurements can be made thanks to proprietary noise reduction technology. 2: Measurement guidance and easy data management with the latest app When linked with a dedicated mobile terminal app, the next battery number to be measured is announced via voice guidance. This helps prevent measurement errors. Additionally, if the location information of the measurement site and the battery number are set in advance as profile information, they can be saved in association with measurement data and diagnosis results. Data management remains easy even after numerous battery diagnoses.

● The automatic selection of function/range makes operation easy. ● The true RMS method displays the effective value even for non-sinusoidal waves. ● Equipped with a non-contact voltage detection function, it serves as a clamp meter, tester, and voltage detector all in one. ● Features a backlight that makes the display easy to see even in dark places.

● A handheld clamp meter equipped with AC current measurement, non-contact voltage detection, low-pass filter, and inrush current mode. ● AC current automatically sets the optimal range.

● A handheld clamp meter equipped with AC and DC current measurement, non-contact voltage detection, low-pass filter, and inrush current mode. ● Automatic detection/switching of AC/DC current with automatic setting of the optimal range.

● A multimeter that covers a wide range. ● Supports DC current (μA) measurement as well.

● Products compatible with measuring ground resistance and ground voltage. Suitable for distribution lines, indoor wiring, electrical machinery equipment, and grounding copper rod installation sites. ● The ground resistance measurement function supports both precise "three-wire" measurements and simple "two-wire" measurements. Measurement ranges of x1, x10, and x100 can be selected. The maximum measurable resistance is 1200Ω. ● The ground voltage measurement function can measure up to a maximum voltage of AC30V. ● Equipped with an LED to confirm correct grounding conditions. ● Includes a backlight for measurements in dark places.

● Lightweight and compact size ● Four measurement modes (AUTO, Hi, Low, Ionbalance) ● Easy detachable ion balance plate ● Power auto-off / Continuous measurement selectable ● Measurement data output as analog voltage

■Features ●Handheld probe complies with the safety standard IEC61010-031 (revised version) Test leads with short-circuit prevention caps. They can be removed considering traditional applications. ●Measurement categories To safely use measuring instruments, IEC61010 classifies safety level standards into categories CAT1 to CAT4 based on the usage location.