シロ産業 Product Lineup

This is a revolutionary integrated sensor that can simultaneously measure and record three parameters: soil moisture, EC, and temperature. The main unit has an IP67 waterproof structure, allowing for reliable measurements for extended periods, whether outdoors or underground. The built-in battery has a long lifespan of approximately one year (with a measurement interval of one hour).

● Data logger, integrated with built-in battery ● Measurement condition settings and measurement data can be easily obtained with a dedicated display unit (M1172K-10811RS) ● Bluetooth communication eliminates the need for cumbersome cable wiring

By simply pressing two electrode spikes, you can quickly check the moisture content of wood and building materials.

● It can simultaneously and instantly measure three types of sensor information on-site. ● It adapts to all environments such as greenhouse cultivation, open-field cultivation, and plant factories. It is also capable of measuring moisture content exceeding 70% in materials like peat moss, coconut coir, rock wool, and sludge. ● By adopting a high-adhesion material dual-mold process, it offers high waterproof performance and durability. ● The influence of ambient temperature is minimized (below 5%), allowing for stable measurements. ● Stable quality is guaranteed through domestic production. (Manufacturer-developed product) ● Calibration has been completed, resulting in minimal individual variation (below 2%), allowing for safe use.

● The portable data logger is a handheld device that allows for easy simultaneous measurement of volumetric water content (VWC), electrical conductivity (EC), and temperature (°C). ● By combining it with the M1260A3-W-5YA series, it enables easy measurement and analysis of soil conditions anywhere. ● It can be powered by batteries, making it ideal for measurements in fields where securing power is difficult. ● The sensor's solid management function is fully utilized. (Solid management refers to the ability to read the serial number recorded in the sensor itself.)

The sawdust and hay moisture meter MI1C-711WAM is highly accurate with temperature compensation. It is a moisture meter that can measure small samples quickly after compression.

The sawdust and hay moisture meter MI1C-711WAM is highly accurate with temperature compensation. It is a moisture meter that can measure a small sample quickly by compressing it.

This moisture meter guarantees high accuracy as it allows for the selection of approximately 260 types of wood in accordance with the temperature correction function.

●Easy to operate ●Durable 60 cm probe-type moisture sensor ●Selection for hay, straw, and grains ●Simultaneous display of moisture content and temperature ●Displays temperature during measurement

● By simply placing the bottom surface of the main unit against the material, you can instantly check the moisture content of wood and building materials without damaging the material. It is also useful for measuring delicate surfaces like wood and hard materials such as concrete. ● Large LCD with backlight display. Excellent visibility with the liquid crystal display. ● Sophisticated European design with intuitive operation based on ergonomics. ● Material group mode tailored to characteristics. Clearly visible at a glance with color. 12-digit LED color wet-dry indicator.

The MC8MK-100S is a high-frequency moisture meter that can measure moisture content (u%) and moisture ratio (w%). The measurement depth can be switched between 10mm and 25mm. It is suitable for measuring the moisture of wood in woodworking products, moisture in building materials, and moisture in concrete curing.

The MC8MR-110S is an electrical resistance moisture meter that can measure moisture content. It is designed for measuring the moisture of firewood and timber using a penetrating method, and it has measurement characteristics for three types of wood properties and eight types of similar building material properties.

●Identify and confirm humidity-related issues with one tool This device is a reliable troubleshooting tool with easy operation. Using a built-in infrared thermal camera with a resolution of 80×60 pixels, it can identify cold spots and locate areas with high humidity. By utilizing the meter's pin and pinless humidity measurement functions, you can verify the actual humidity. It can display thermal images and humidity readings on a single screen, and it is also possible to generate reports using free software. ●Accelerate troubleshooting Whether through non-destructive measurement or contact measurement, using this device's pinless technology or external pin probe allows for easy investigation of insulation and humidity-related issues. ●Portable and highly durable This device features a robust compact design and a rechargeable built-in battery, making it convenient to carry anywhere when needed.

Wood biomass power generation. It is a noteworthy renewable energy source. The wood chips used as fuel for power generation come from various sources, such as thinning materials from forests and construction waste, and the moisture content varies widely. The moisture content of wood chips is directly related to their calorific value, ignitability, and combustibility, significantly affecting the power generation efficiency of boilers. Therefore, proper moisture management of wood chips is required. Traditionally, moisture measurement of wood chips has been conducted using methods like "heating and drying," but these methods have significant drawbacks, such as lack of speed and the need for specialized equipment. The device "Wood Chip Digital Moisture Meter M70T-200KTS" can measure moisture simply by inserting a rod-shaped sensor into a pile of wood chips. It is easy to operate, but by using a newly developed calibration curve specifically for wood chips that is pre-registered, it provides reliable moisture values. This device is effective in the production, acceptance, and chip yard sites of wood chips. We confidently recommend it from moisture meter experts to all wood chip specialists. *Calibration curve: A formula that converts the electrical signals measured by the sensor into moisture values.

● High-frequency non-destructive testing without the use of needles ● Usable on various types of wood, concrete, bricks, and gypsum, etc. ● Selection of 6 groups of wood (approximately 230 types) or 5 groups of building materials ● Two measurement depth sensors at 100mm and 10mm ● Electronic sound alarm for moisture values ● Battery depletion warning and automatic stop function ● Made of impact-resistant ABS resin ● Capable of displaying relative humidity of building materials from 0 to 98% RH ● Automatically calculates the average value from up to 16 measurement values

● Completely unaffected by water pressure and environmental noise - Can detect leak points without being influenced by surrounding noise at all. - Exploration distance of up to 200m and capable of measuring burial depth! - Compatible with all diameters of PVC pipes and poly pipes! - Easy operation for exploring resin pipe routes that anyone can perform. - An excellent adaptive leak detection device that is not limited by water pressure or leak volume! ● Pinpoint detection of water supply pipes and extremely small leaks - Capable of exploring branching points in piping and iron pipe routes as well. - Achieves easy exploration with just dial adjustments for both transmitter and receiver!

It can detect even the smallest leaks regardless of the type of pipe, such as PVC or steel pipes.

It is used to measure the salt content in semi-solid foods such as sausages and meat products. It can also be used for liquids. Measurements are taken using gold-plated electrodes at the sensor tip. *The display reading of 0 to 100 is a relative reference value, not a percentage of salt content.

■Features ●Wide measurement range It can measure moisture content over a wide range of 1 to 40%, making it suitable for a variety of samples. ●Automatic correction function Automatic correction is performed using the built-in mass meter and temperature sensor, allowing for accurate moisture measurement. ●Samples can be poured directly For most samples, no prior preparation such as grinding is necessary; they can simply be poured directly into the cup without destruction. ●Display of bulk density (g/L) Bulk density (sample mass (g) / volume (L)) is automatically calculated. ●Printer output An optional thermal printer can be used to record measurement results. ●Easy operation Measurement actions are indicated by a buzzer and icons. Additionally, when discharging materials, the unit can be lifted to pour out, and its lightweight design makes it easier to carry.

The measurement speed is fast, and the measurement values are displayed instantly on a large screen. It can measure in the range of 9% to 30%, and it also features automatic recording of maximum and minimum values, as well as a moisture value hold function. Measurement data can be transferred to a computer via the RS232C interface. It is recommended for moisture management and research of wood.

■Features ●User-friendly control panel with LED The LED on the control panel indicates the next operation or informs the user of the device's status through lighting or blinking. ●Environmentally friendly organic carbon heater The organic carbon heater does not contain halogen compounds or metals that have a significant environmental impact. It emits more than twice the infrared radiation compared to halogen heaters in the wavelength range (2.5–3μm) where moisture reacts with heat, enabling efficient drying. Additionally, its lifespan is approximately four times longer than that of conventional infrared lamps. ●Pre Heat mode and auto tare mechanism to reduce errors Immediately after power-on or when the internal temperature of the measuring device is not stable, there may be measurement errors due to the lift of the balance. To resolve this, the device is equipped with a "Pre Heat mode" that stabilizes the internal temperature through preheating. Furthermore, it also features an "auto tare mechanism" that allows for zero-point adjustment by lifting the sample tray during measurement, ensuring reliable measurements even over extended periods.

With one device, you can measure free residual chlorine, total residual chlorine, pH, and cyanuric acid. For measuring residual chlorine, we use powdered DPD reagents, ensuring safe usage. By measuring free residual chlorine and total residual chlorine, you can also determine combined residual chlorine. We offer a multifunctional water quality meter at a low price. The automatic zero calibration makes operation easy. The main unit and reagents are delivered in a hard case.

● The size of the sample dish is a generous φ95mm! Generally, the more "broad, thin, and uniform" the sample is spread, the higher the measurement accuracy. By adopting a uniquely designed reflector (patent pending), we have achieved uniform heating. ● Simple measurement procedure! By selecting the "Easy Mode," you can start measuring without pressing the start button by simply placing the sample and closing the heater cover, simplifying the steps to measurement. ● Enhanced PC connectivity features! A standard USB connector for connecting to a computer is included. You can also use the direct connection feature with Windows. *Please inquire if connecting via Windows Vista, Windows 7, and USB ports. ● This is an eco-label certified product from our company. *Energy-saving: 30% reduction compared to our conventional models. ● Equipped with an aluminum integrated "UniBloc(R)" that enables accurate moisture measurement. ● The sample is clearly visible! Wide observation window.

● Compact body with an easy-to-read large LCD display. ● Easily check dryness and moisture levels with upper and lower limit functions.

A moisture meter compatible with various types of dried noodles, including somen and hiyamugi.