シロ産業 List of Products and Services

This is an automatic label peeling machine for roll labels with a maximum width of 178mm. It is compatible with various substrates (white PET, transparent PET, Neoma, cast-coated paper, fine paper, kraft paper, foil paper, washi paper, Yupo, synthetic paper, etc.). It supports free shapes such as square, round, star shapes, and multiple rows of labels. Labeling tasks can be performed efficiently with one hand. It is a slow type with a transport speed of 39mm/second. It can accommodate labels with a length of 3mm. The maximum diameter of the label set bar (shaft) is 1 inch (approximately 25mm), and the maximum diameter of the included reel (a device that clamps the roll label from both sides) is 3 inches (approximately 76mm). The roll labels you use can be set on the label set bar as long as the inner diameter of the core is 1 inch or more. After setting the roll label, the sensor position and the holding brush can be adjusted using a butterfly screw. When you take the peeled label from the front, the next label is sent out and peeled off. The user simply pinches the label upwards, making it a simple and easy-to-use electric label dispenser for beginners. The waste release paper is automatically wound up, maintaining a clean workspace. There is a hook at the back of the product, allowing it to be hung on a bar on the workbench (with a roll label outer diameter limit of Ø210).

This is an automatic label peeling machine for roll labels with a maximum width of 178mm. It is compatible with roll labels from various label manufacturers and can handle a variety of substrates (white PET, transparent PET, Neema, cast-coated paper, fine paper, kraft paper, foil paper, washi paper, Yupo, synthetic paper, etc.). It supports free shapes such as squares, circles, stars, and multiple rows of labels. Labeling tasks can be performed efficiently with one hand. It has a standard transport speed of 80mm/second. The maximum diameter of the label set bar (shaft) is 1 inch (approximately 25mm), and the maximum diameter of the included reel (a device that clamps the roll label from both sides) is 3 inches (approximately 76mm). The roll labels you use can be set on the label set bar as long as the inner diameter of the core is 1 inch or more. After setting the roll label, the sensor position and the pressing brush are adjusted using a butterfly screw. When you take the label that has been peeled off from the front, the next label is sent out and peeled off. (The user performs the action of pinching the label upwards.) This is a simple and easy-to-use electric label dispenser for beginners. The waste release paper is automatically wound up, maintaining a clean workspace.

This is an automatic label peeling machine for roll labels with a maximum width of 178mm. It is compatible with roll labels from various label manufacturers and can handle a variety of substrates (white PET, transparent PET*, Neoma, cast-coated paper, fine paper, kraft paper, foil paper, washi paper, Yupo, synthetic paper, etc.). It supports free shapes such as squares, circles, stars, and multiple rows of labels. Labeling tasks can be performed efficiently with one hand. It is a fast type with a transport speed of 160mm/second. The maximum diameter of the label set bar (axis) is 1 inch (approximately 25mm), and the maximum diameter of the included reel (a device that clamps the roll label from both sides) is 3 inches (approximately 76mm). The roll labels you use can be set on the label set bar as long as the inner diameter of the roll core is 1 inch or more. After setting the roll label, the sensor position and the pressure brush are adjusted using a butterfly screw. When you take the label that has been peeled off in front, the next label is sent out and peeled off. (The user performs the action of pinching the label upwards.) It is a simple and user-friendly electric label dispenser, even for beginners. The waste release paper is automatically wound up to maintain a clean workspace.

This is an automatic label peeling machine for roll labels with a maximum width of 57mm. It is compatible with roll labels from various label manufacturers and can handle a variety of substrates (white PET, transparent PET, Neoma, cast-coated paper, fine paper, kraft paper, foil paper, washi paper, Yupo, synthetic paper, etc.). It supports free shapes such as squares, circles, stars, and multiple rows of labels. Labeling tasks can be performed efficiently with one hand, with a transport speed of 56mm per second. The maximum diameter of the label set bar (shaft) is 1 inch (approximately 25mm), and the maximum diameter of the included reel (a device that clamps the roll label from both sides) is 3 inches (approximately 76mm). The roll labels you use can be set on the label set bar as long as the inner diameter of the roll core is 1 inch or more. After setting the roll label, the sensor position and pressure brush can be adjusted using a butterfly screw. When you take the peeled label from the front, the next label is sent out and peeled off. (The user gestures to pinch the label upwards.) This is a simple and user-friendly electric label dispenser, easy for beginners to use. The waste release paper is automatically wound up, maintaining a clean workspace.

This is an automatic label peeling machine for roll labels with a maximum width of 57mm. It is compatible with roll labels from various label manufacturers and can handle a variety of substrates (white PET, transparent PET, Neoma, cast-coated paper, fine paper, kraft paper, foil paper, washi paper, Yupo, synthetic paper, etc.). It supports free shapes such as squares, circles, stars, and multiple rows of labels. Labeling tasks can be performed efficiently with one hand. The transport speed is 56mm/second. The maximum diameter of the label set bar (shaft) is 1 inch (approximately 25mm), and the maximum diameter of the included reel (a device that clamps the roll label from both sides) is 3 inches (approximately 76mm). The roll labels you use can be set on the label set bar if the inner diameter of the core is 1 inch or more. After setting the roll label, the sensor position and the pressing brush can be adjusted with a butterfly screw. When you take the peeled label from the front, the next label is sent out and peeled off (the user gestures to pinch the label towards themselves). This is a simple and user-friendly electric label dispenser, even for beginners. The waste release paper is automatically wound up, maintaining a clean workspace.

This is an automatic label peeling machine for roll labels with a maximum width of 127mm (up to a label length of 305mm), compatible with roll labels from various label manufacturers. It supports a variety of substrates (white PET, transparent PET, Neoma, cast-coated paper, fine paper, kraft paper, foil paper, washi paper, Yupo, synthetic paper, etc.) and accommodates free shapes such as squares, circles, stars, and multiple rows of labels. Labeling can be efficiently performed with one hand. It features a slow transport speed of 51mm/second. The maximum diameter of the label set bar (shaft) is 1 inch (approximately 25mm), and the maximum diameter of the included reel (a device that clamps the roll label from both sides) is 3 inches (approximately 76mm). The roll labels to be used can be set on the label set bar as long as the inner diameter of the core is 1 inch or more. After setting the roll label, the sensor position and the holding brush can be adjusted using a butterfly screw. When the peeled label at the front is taken, the next label is sent out and peeled off. (The user gestures to pinch the label towards themselves.) This is a simple and user-friendly electric label dispenser, maintaining a clean workspace with an automatic winding mechanism for the release paper waste.

This is an automatic label peeling machine for roll labels with a maximum width of 127mm (up to a label length of 305mm). It is compatible with roll labels from various manufacturers and can handle a variety of substrates (white PET, transparent PET, Neoma, cast-coated paper, fine paper, kraft paper, foil paper, washi paper, Yupo, synthetic paper, etc.). It supports free shapes such as squares, circles, stars, and multiple rows of labels. Labeling can be efficiently performed with one hand. The standard transport speed is 100mm/second. The maximum diameter of the label set bar (shaft) is 1 inch (approximately 25mm), and the maximum diameter of the included reel (a device that clamps the roll label from both sides) is 3 inches (approximately 76mm). The roll labels you use can be set on the label set bar as long as the inner diameter of the core is 1 inch or more. After setting the roll label, the sensor position and the pressure brush can be adjusted using the butterfly screw. When the peeled label in front is taken, the next label is sent out and peeled off. (The user gestures to pinch the label towards them.) This is a simple and easy-to-use electric label dispenser for beginners. The waste release paper is automatically wound up, maintaining a clean workspace.

●Ideal for small labels and small work areas ●Dispenses labels and die-cut parts ●Accuracy and reliability of photo sensors ●Electrically removes liners from paper, vinyl, acetate, polyester, foil, etc. ●Electrically winds up liner scrap to maintain the work environment of the applicator ●No tools are required to adjust for different label sizes ●No maintenance required ●High torque motor for large diameter label rolls ●LCD counter can display how many labels have been dispensed.