シロ産業 Product Lineup

■Ideal for equipment integration such as unit coolers Due to its slim design, it is optimal for equipment integration. ■Usable in low temperature range of -50℃ It can be used in ambient temperatures from -50℃ to +30℃. ■Built-in thermal protector The motor is equipped with a temperature overheat prevention device (self-resetting thermal protector) to prevent excessive temperature rise. ■Corrosion-resistant all stainless steel construction Made of corrosion-resistant all stainless steel (excluding the iron core and ball bearings inside the motor), making it ideal for food-related equipment compliant with HACCP. ■Waterproof structure achieving IP44 equivalent for all blade diameters (excluding M1357F-X25UTS and M1357F-X30UTS) Water intrusion is suppressed by rotating and fixed flingers. *According to JIS C 4034 (for the motor alone).

● Equipped with large blades with a diameter of 1M ● Easy to move with a swivel caster with four-wheel stopper ● Usable in areas where oil mist and dust are generated ● Low noise at 67dB ● Can be used in flammable areas

● Fine mist generation can be achieved without a fine mist nozzle. Clogging issues that were problematic with nozzle systems do not occur fundamentally. ● Energy-saving as it does not use high-pressure pumps or powered sprayers. ● Particle size can be freely adjusted.

●Measures against heatstroke, creating a cooling effect ●All you need is a water supply, an easy-to-install DIY kit

● We use a motor equipped with a thermal protector (resettable heating protection device), so you can use it with peace of mind. If the motor overheats, it will automatically stop. When the motor's temperature drops, it will automatically start rotating again. ● The dial switch allows you to adjust the airflow in three levels. ● It has casters for easy mobility. ● Angle adjustment is possible in two stages, approximately 15 degrees and approximately 30 degrees upwards.

MC16F-600A3S Wind reach distance of 65m! ● Wind direction adjustable by 90 degrees in the pitch angle ● Equipped with an air guide to adjust the wind diffusion range ● Convenient 4-wheel casters for easy movement (with brakes) MC16F-700A3S Maximum wind speed of 20m/s! ● Wind reach distance of 70m! when using 3-phase 200V 60Hz ● Ideal for ventilation in large factories and warehouses ● Wind direction adjustable by 90 degrees in the pitch angle ● Convenient 4-wheel casters for easy movement (with brakes) *Note 1: When using 3-phase 200V 60Hz *Note 2: Measured at a distance of 1m from the outlet

● Powerful warmth with a large infrared heat radiation panel ● Large diameter 565mm infrared radiation panel ● High power with a heat output of 38KW (for wooden structures: approximately 45 tsubo / for concrete: approximately 62 tsubo) ● For heating large spaces such as gymnasiums and factories. ● Equipped with five safety devices.

M1483E-3732H M1483E-3746H This is a large hanging type. It can be used not only for heating within factories but also for the heat treatment of factory products. M1483E-1030H M1483E-1075H It warms up quickly after turning on the switch, making it suitable for toilets and changing rooms in cold areas, as well as for insulating machines and equipment within factories.

Wide floor application 200m3 In a 200m3 room, approximately 20% humidity can be achieved in about 1 hour. (Setting 24°C) ● Does not get wet (does not emit steam) ● Energy-saving (about 600 yen/month) ● Electric dust collection (recyclable) ● Usable throughout the year ● Usable all year round with humidification and air purification functions

●Easy operation with casters ●Garnet design considering safety ●Over 3,500 units delivered to schools

■Features ●Damper type ●Negative ion generation ●Super high air volume ●Energy-saving ●Inverter variable speed

●Highly effective in eliminating temperature unevenness.

● Mist spraying by fans. No nozzle required! Water from the tank is pumped up and turned into mist by hitting a centrifugal disc, which is then sprayed by the fan. Since no nozzle is used, there is no clogging! Maintenance is also easy! * Three levels of airflow adjustment: strong, medium, and weak. Can be used for air blowing only. * Equipped with automatic left-right oscillation function. ● Standard water supply hose for tap water included Water in the tank can be automatically supplied directly from the tap. ● Convenient handle for mobility You can hang cords or hoses on the hook, making it convenient. The main unit and tank can be separated, making it easy to move! ● Full water stop function With a float attached, there is no worry of overflowing even when full. ● Easy drainage You can drain water by opening the drain cock. ● Large 30L tank The main unit and tank can be separated, making cleaning and maintenance easy!

Compared to before, it has become possible to spray a larger volume of mist. (At 0.5 MPa, up to approximately 300 milliliters per minute)

● An energy-saving cooling device that sprays mist with an average particle diameter of 10 to 30 μm and disperses cool air over a wide area using a blower fan. ● Cools the surrounding temperature by 3 to 5°C due to the heat of vaporization when the mist evaporates. ● A type with a pump and water tank that can be installed anywhere (mobile cart type). ● Suitable for applications such as heatstroke prevention and dust control. ● Spray flow rate of 56.6 L/hr (at 6 MPa), ideal for use in large spaces.

●Angle-adjustable type Both for floor placement and ceiling suspension, angle adjustment is possible up and down! Air can be blown towards the target without using tools. ●Can be installed as a ceiling suspension type using beams in the factory Can be used for air blowing and circulation in a space-saving manner.

• Outstanding operability - One-touch ignition while standing! The control panel is installed at the top, allowing for easy operation while standing. This significantly improves operability compared to conventional commercial stoves that require bending down to operate. • Wide heat adjustment - Efficient because you can adjust the warmth. The heat output can be adjusted in stages between 7,100 and 14,200 kilocalories. You can choose the necessary heat output, making it efficient to use. • Double effect with infrared and warm air Infrared from the large heat radiation tube warms your entire body, and the warm air generated from combustion is directed to your feet. This maximizes the performance of the kerosene and minimizes fuel waste. The infrared and warm air spread in all directions (360 degrees), ensuring even warmth. • Convenient mobility with casters The MC35S-N5S comes with large casters and a handle, making it easy to move around.

● Two-stage combustion with strong and weak settings of 1.8L/h and 1.4L/h. If operated in weak combustion for 8 hours, you can save 3.2L (320 yen) per day. *Compared to conventional models (conventional models only have 1.8L/h), assuming 1L costs 100 yen. ● Neat storage with three-tier stacking capability. Compact and stackable. The handle is foldable, allowing for tidy storage.

● Powerful airflow with a large fan (high air volume) The large fan blows cold air (cool breeze) over a wide area. * Airflow adjustment: 50% to 100% ● Energy-saving & eco-friendly air conditioning (power-saving effect, economy) Power consumption is limited to running the pump that circulates water and the fan. It is economical and contributes significantly to energy-saving measures. ● Environmentally friendly (ecology) No refrigerants (freon gas) used. The absence of a compressor reduces electricity usage and curbs CO2 emissions. ● No heat discharge, can be installed indoors Since it does not have a compressor, there is no heat discharge. It can be installed indoors where it could not be placed due to heat discharge. * Ventilation is required for indoor use. ● Gentle and moisturizing cool breeze By cooling the air using the natural power of water's evaporation heat, it prevents excessive cooling and provides a gentle cool breeze for the body. Air passing through water-saturated pads contains moisture, preventing dryness.

●Since it is PSE compliant, you can use it with confidence. ●The lamp has a special coating on the surface of the quartz tube to reduce glare. ●Compared to conventional heating lamps, the output of near-infrared rays has been increased by improving the color temperature.

● Adjustable airflow angle up to 360 degrees! ● Can blow air straight up and straight down! ● Equipped with a power outlet for connection use! ● Dial-type wind speed adjustment. ● Energy-efficient external motor design. ● Lightweight design at 7.3 kg. ● Stackable and space-saving for storage!

●Groundbreaking swing type ●Super high air volume ●Energy-saving ●Inverter continuous variable speed

Adoption of motor coils with outstanding conservativeness, reliability, and safety!! Aluminum blades that are safe from oil and smoke.

Low noise design Motor with temperature thermistor Adjustable left/right and height Input wire 2.8m

■Features ●Easy to move with casters. ●Energy-saving and low noise type. ●Adjustable wind direction up and down. ●Continuous operation time of 180 hours.

Foldable tripod Low noise design Motor with temperature thermos Adjustable up and down, left and right, height Input wire 2.8m

Three-phase 200V

Single-phase 100V with thermal protector

●Single-phase 100V (ME1V-3510SUS-100V) / Three-phase 200V (ME1V-3530SUS-200V) ●With thermal protector (excluding ME1V-3530SUS-200V) ●Totally enclosed ●Stainless steel specification ●Blade diameter 350mm ●Air volume: Strong/Weak 2-stage switch (ME1V-3530SUS-200V does not have a switch; it operates only in strong mode)

■Features by Type ○M308F-18DSALH ●Equipped with automatic oscillation function! ●Maximum wind speed of 190m/min (high mode) ●Two-speed switch for wind speed ("high/low mode") ●Convenient timer included (1 hour, 2 hours, 4 hours) ●Angle adjustment (up to 45°) possible ○M308F-18DSLH ●Maximum wind speed of 160m/min (high mode) ●Two-speed switch for wind speed ("high/low mode") ●Convenient timer included (1 hour, 2 hours, 4 hours) ●Angle adjustment (up to 45°) possible ○M308F-18DSDLH ●Flexible placement options: "hanging" or "wall-mounted"! (Patent pending) ●Maximum wind speed of 190m/min (high mode) ●Angle adjustment (up to 60° up and 30° down) possible ●Can be hung on a single pipe (φ48.6mm) (please secure with a strap or string through the strap hole)

Water that is not crushed is automatically recycled and is economical.

●Single-phase 200V ●Ceiling-mounted ●Directly connected to water supply ●Thermal protector ●IP55 waterproof meter

M281-56ZV1V (Single-phase 100V) M281-56ZV2V (Single-phase 200V)

100V factory fan (totally enclosed motor) 200V factory fan (totally enclosed motor)

Ideal for drying the floor and ventilation.

Aluminum wing specification

● Achieves power consumption of 117/158W. (50/60Hz) ● Adoption of a two-pole motor and air guide enables powerful airflow. ● Capable of blowing air directly up and down. ● Concentrated cooling with strong airflow. ● Uses urethane grease for the motor bearings, achieving high durability of the bearings. ● Usable at ambient temperatures up to 60°C. ● Can be installed in low locations. ● Easy-to-clean grille guard design. ● Power switch included on the main unit.

It is compatible with both 50Hz and 60Hz. The specifications below are based on an intake air temperature of 33°C and a relative humidity of 50%.

By simply connecting your existing ventilation fan to this product, it detects air pollution such as cigarette smoke and the room temperature with two sensors, automatically operating the ventilation fan. ● Pollution Sensor Detects odors such as cigarette smoke. When the pollution sensor detects, it activates the ventilation fan for about 10 minutes. ● Temperature Sensor Detects the indoor temperature. When the temperature sensor detects, it activates the ventilation fan for about 10 minutes. *If both are detected simultaneously, the temperature sensor takes priority.

Dehumidification R410A refrigerant

Prevention of excessive cooling with natural wind using water! Automatic swing function with left and right oscillation!

● No heat emission, 220W energy-saving and eco-friendly type ● Gentle and refreshing breeze for the body ● Effective for heatstroke prevention ● Provides a cooling effect of 3°C to 9°C

●Built-in circulator The circulator pushes warm air forward significantly. ●Blow-out angle adjustable to 45° upward and 10° downward.

●Easy to move Equipped with a convenient handle. ●Adjustable blowing angle of up to 17° up and down ●Cord holder Can store cords neatly.

Far infrared desk panel heater