シロ産業 Product Lineup

●Display of Max/Min values ●Real-time measurement available on PC ●Hi/Lo alarm function included *Settings for recording interval, Hi/Lo alarm, recording start time, etc., are done using the MF6R-201UF (USB data collector for MF6R-20DF).

Cable length: approximately 1m *Using the product for purposes other than its intended use or handling it roughly may lead to sensor damage or cause injury. Please select a sensor that suits your intended purpose.

● With a character height of 100mm and a recognition distance of 30m, visibility is outstanding! ● The possibilities for the installation location of the display unit have greatly expanded. ● This device adopts a 100mm character height substrate unit and has a housing case thickness of 20mm, making it a slim temperature display unit. ● Due to its slim and lightweight design, it can be easily installed in places like hospitals, schools, offices, factories, banks, and museums, where safety considerations were previously necessary during conventional installations.

Easy temperature measurement inside the refrigerator A thermometer that serves two purposes

●Can be thrown in with a 3m cable (made of silicone) ●The sensor part at the tip is weighted. It is suitable for measurements in storage tanks and fish farming sites, and since it is made of hygienic AISI 316 stainless steel, it is suitable for HACCP management and can be used for food and beverages.

Gas temperature probe for measuring ambient temperature, wind temperature, etc. It can also record on a smartphone/tablet, allowing you to track temperature trends.

Multifunctional Waterproof type Certificate issuance available

Plating temperature measuring thermometer

Thanks to its waterproof design, it can be used in wet areas or with wet hands. It is ideal as a center thermometer for food temperature management.

Separate thermocouple probes are available in various options depending on the temperature range and intended use.

Digital thermometer as a substitute for alcohol thermometer.

Multi-functional thermometer with dual channel simultaneous display

It is a robust industrial thermometer with a liquid-filled design that measures the temperature of distant locations.

●Temperature and humidity display device using LED with a character height of 57mm ●Alarm output function (optional) that can connect a buzzer, rotating light, etc.

It is a waterproof handheld food thermometer.

High-spec thermometer with a resolution of 0.01℃, featuring a platinum resistance temperature detector Pt100 (Class A: 4-wire type) sensor.

This is an outdoor waterproof case designed to protect measuring instruments from rain, wind, and dust. *The front panel of the case meets the IP65 standard; however, there is a temperature sensor outlet at the bottom of the case, which creates a gap, so that part is not waterproof.

Foldable waterproof center thermometer using K-type thermocouple. Probe extended length 260mm.

This is a thermometer that displays the average daily temperature in an accumulated format. It simultaneously shows accumulated temperature, accumulated days, current temperature, and the previous day's average temperature, which can be used as a guideline for determining rice harvesting, harvesting criteria for greenhouse cultivation, and predicting flowering from pruning flowers. Accumulated temperature is an effective means for estimating the harvest period.

Wireless reception (Bluetooth) for analysis and management, Android-exclusive thermometer.

● The head is made of a magnet, allowing it to attach to metal surfaces for hands-free temperature measurement. ● It adheres closely to metal surfaces (ferromagnetic materials), making it less likely to experience variations during temperature measurement, enabling stable temperature readings.

● Data collection is performed using a dedicated data collection device, directly transferring data to a computer via USB connection using the communication port TR-50U2 (sold separately). Data from up to 16 units can be collected on-site using the data collector TR-57DCi (sold separately). ● 15 recording intervals and large recording capacity. Each unit can measure and record 1600 data points. The recording interval can be selected from 15 options ranging from 1 second to 60 minutes. For example, with a recording interval of 60 minutes, continuous recording can last for 666 days (approximately 2 years). ● Temperature adjustment function. The temperature data logger displays and records corrected temperatures by inputting correction values in advance.

●Simply plug it into a PC to display temperature graphs in PDF format and detailed data reports (no dedicated software required). ●In addition to the PDF report, using dedicated software allows for data analysis, storage, and export to EXCEL (the software can be downloaded from the manufacturer's website). ●When unexpected changes occur during transport, you can press the MARK button to record a stamp (up to 9 times). ●It can be restarted immediately on-site without any reconfiguration. ●Five alarm temperature range settings are possible.

● Usable in a temperature range of -80℃ to 70℃ ● Simply plug it into a PC to display temperature graphs in PDF format and detailed data reports (no dedicated software required) ● In addition to the PDF report, using dedicated software allows for data analysis, storage, and output to EXCEL (software can be downloaded from the manufacturer's homepage) ● When unexpected changes occur during transport, you can press the MARK button to record a stamp (up to 9 times) ● Can be restarted immediately on-site without resetting ● Five alarm temperature range settings are possible ● A NIST traceability calibration certificate is provided at the factory for three temperature points

● Compact and high-precision Pt1000 sensor ● Integrated probe ● Manufactured in Germany

● Maximum/Minimum value ● Offset and slope adjustment ● Alarm function (MC8MH3750S only) ● Logger function (MC8MH3750S only) ● 50-point characteristic adjustment function (MC8MH3750S only) ● Manufactured in Germany

It only requires button operation, so anyone can easily use it right away. Additionally, it has a zero-point adjustment function, allowing for temperature calibration at 0°C using distilled water and ice. ● Wide measurement temperature range: -40 to 250°C ● High accuracy: ±0.5°C ● The tip is 1.7mm in diameter, so it does not create large holes in food. ● The zero-point adjustment function makes daily checks easy. ● Durable stainless steel probe ● RoHS compliant, CE compliant, EN13485 compliant

● Data memory for 60,000 points ● Records maximum, minimum, and average values (resettable) ● Upper and lower limit alarms (LED and sound) ● Long-life battery (4 years) ● Calibration certificate included (DAkkS)

● Detectable wires are VVF 3x2.0mm. By attaching the attachment, VVF 2x2.0mm and VVF 2x1.6mm can also be detected. ● It has become possible to detect current even on the surface of VVF cables, which was not possible with clamp-type detection. ● Current detection for two wires It has become possible to detect alternating current (single-phase) flowing through two wires, which was not possible with clamp-type methods. When the direction of the current is reversed, the direction of the magnetic flux also reverses, resulting in two magnetic fluxes canceling each other out. In clamp-type methods, accurate measurement cannot be achieved because it detects the sum of the magnetic fluxes.

■Product Features ●Japanese menu support ●Frequency range: 100MHz, 70MHz, 50MHz ●4 analog channels, 16 digital channels (M2685MS series) ●Maximum sample rate: 1GSa/s ●Low noise floor, vertical axis range: 1mV/div to 10V/div ●Horizontal axis: 12 div ●Displays automatic measurement results as graphs or tables in history ●Serial bus trigger & decode (optional, RS232, I2C, SPI) ●Built-in 2-channel 25MHz signal generator (M2685MS series, M265DS-**Z-S series) ●Interfaces: USB host & device (PictBridge support), LAN (LXI), AUX (trigger output, pass/fail signal output) ●7-inch WVGA (800×480) display

The FDA (Food and Drug Administration) and CDC (Centers for Disease Control and Prevention) in the United States recommend the use of calibrated thermometers and data loggers for monitoring the storage temperature of vaccines. The MI1M-231M continuously monitors and displays the minimum and maximum temperatures during vaccine storage.

■Temperature Management of Cargo Holds ●What is the importance of temperature management? - Many products within the cargo hold are at risk of spontaneous heating or ignition, and if not properly managed, they can cause significant damage. - This is particularly a concern in double-hulled cargo ships with high moisture retention. ●What types of items are applicable? - Raw materials such as tobacco, cocoa, cotton, jute, etc. - Items containing oils, such as seeds and nuts. - Oil cakes (compressed oil, extracted oil, pellets) - Aluminum powder, ores, coal products, etc.

This device receives data measured by a digital temperature and humidity sensor and displays the measurement values. It is characterized by being less susceptible to interference noise compared to analog devices. For the display, it uses large LED elements, which provide good visibility from a distance and automatically adjust the brightness of the LEDs according to the surrounding light conditions.

Temperature probe deviation adjustment, multi-user settings, °C / °F / K selection, data storage, transmission, overrun alarm, single and double dual input, data hold, maximum, minimum, and average values, overrun signal output, and user self-calibration functions are available.

Since it contains elements of Class A, it is also optimal for high-precision measurements. It uses a titanium protective tube, allowing for stable use even in seawater.

● It is compact, lightweight, and convenient to carry (comes with a handy strap) and is also high-performance. ● It has a drip-proof structure that ensures performance is not affected even in areas where water droplets may fall on it, such as on a ship or in a workplace. ● The installation and removal of the sensor can be done easily. ● The LCD display is easy to see in bright conditions.

■Features ● Sends temperature and location information to the server via smartphone. Can be checked anytime on PC (DX mode only) ● An alert email is sent to the administrator immediately if the set temperature is exceeded (DX mode only) ● Data can be easily graphed using dedicated PC software ● Operates for about 3 months on 2 alkaline batteries ● Button lock function prevents accidental operation

● High-speed response 14ms ● Narrow field of view even in a small size (φ3.5mm/50mm) ● Heat-resistant head up to 120℃, no cooling required ● Ultra-compact head M12×28mm ● Wide measurement temperature range -50 to 1000℃

●No power supply needed with solar battery ●Remote monitoring of temperature data ●Digitalization of electronic data is possible ●Maximum transmission distance for temperature data is 120m ●Switch-type sensors can also be connected

When the alarm temperature is reached, the LED color alternates between green and red to indicate that the measured temperature is at the alarm level. By downloading the dedicated free software for the MI1TH-251M, you can customize the JCT-140, including setting the alarm temperature, changing the temperature offset value, and specifying the display colors. The software can be downloaded for free by scanning the QR code provided in the manual with an Android smartphone or iPhone.

● This thermometer is the perfect kit for food service professionals and quality control inspectors. ● Switchable between °C/°F ● Comes with five types of K-type probes suitable for different measurement targets. ● Large screen with an easy-to-read LCD display ● Waterproof - IP54

This is a 2-channel digital thermometer that can measure temperatures at two locations simultaneously with one unit. It can measure the temperature at the location where the thermometer is installed and the temperature measured by the sensor attached to a 3m cable at the same time. It is ideal for indoor and outdoor temperature measurement. It also has a function to automatically record the maximum and minimum temperatures.

You can simultaneously measure the temperature at the location where the thermometer is installed and the temperature measured by the sensor at the end of the 3m cable. It is ideal for measuring indoor and outdoor temperatures. It also has a function to automatically record the maximum and minimum temperatures.

The MI1TP-T915M digital thermometer for freezers and refrigerators is a multifunctional device that alerts you with an electronic sound alarm when the temperature inside the freezer or refrigerator exceeds the set upper or lower temperature limits. It is capable of measuring freezing temperatures down to -50℃.

The temperature buffer sensor, sealed in a bottle with propylene glycol, is not affected by sudden changes in internal temperature due to the opening and closing of refrigerator doors, and can measure values that approximate the liquid temperature of temperature-sensitive items such as vaccines and investigational drugs. Includes ISO/IEC 17025:2017 temperature calibration certificate.