シロ産業 List of Products and Services

● It can be used for the prevention of hypoxia accidents and the management of oxygen concentration. ● There are two types of alarms: high concentration and low concentration, and values can be set in increments of 0.1%. ● It features a peak value display mode that shows the minimum measurement value. It also has a backlight function.

The PAL series has introduced a scale for measuring the moisture content of dried fruits with the formula "Moisture Content 100% - Soluble Solid Content % = Moisture %." Place the cut side of the dried fruit on the prism side, secure it with the included MAGIC, and take the measurement. Please use it as a simple moisture meter.

1. Measure the sample (alcohol) with a dedicated pipette and place it into a beaker. 2. Measure 120cc of tap water, add it to the same beaker, and stir. 3. Transfer the solution from step 2 into a dedicated cup (1.5ml). 4. Suck the liquid from step 3 into the reaction reagent tube and return it to the cup. 5. Set the dedicated cup onto the main unit and start the measurement (approximately 12 minutes). 6. Displayed value × 0.4 = full course concentration (%).

The MI1K-143ZM is a low-concentration ozone meter that measures ozone gas concentrations up to 1 ppm. It has a built-in suction pump, allowing for ozone concentration measurements in narrow spaces by connecting a hose to the nozzle. Additionally, it features an alarm function that emits an electronic sound at two specified ozone gas concentration levels, a zero calibration function, and a backlight display function that allows measurements to be seen in dark environments.

● This is a residual oxygen measurement device that performs non-destructive testing on transparent packages such as bags, pouches, and trays. ● It is effective for sampling in non-destructive production processes and for laboratory quality testing. The M3230RX-10Z enables rapid and easy residual oxygen measurement tests for transparent food packages. ● With non-destructive measurement, samples can be returned to the production line without waste, contributing to the reduction of product loss and food waste issues. The measurement results are immediately displayed on the screen and recorded internally. ● The operation method is very simple. Just place the product to be measured on the device, touch the test head to the film, and press the measurement button to start measuring. The residual oxygen concentration in the package's headspace is measured, and the measured concentration is displayed on the touchscreen. ● Contributing to SDGs through non-destructive testing and food waste reduction ● User-friendly touchscreen ● Does not have adverse effects on the eyes.

Easily measure refractive index and concentration (% Brix) A versatile device measures both refractive index and concentration (% Brix). The refractive index helps understand the composition of the sample water and evaluate concentration and density. It is used in a wide range of fields, including food/beverage, pharmaceuticals, and industry.

Easy operation, measures sugar content (% mass) in seconds. The MF2RFM-FT96802H, MF2RFM-GC96803H, and MF2RFM-VS96804H are specialized models in the refractometer series. The MF2RFM-FT96802H measures fructose, the MF2RFM-GC96803H measures glucose, and the MF2RFM-VS96804H measures invert sugar, each within a range of 0.0 to 85.0% mass (% w/w).

Easy measurement of Baumé degree Baumé degree is used as an indicator of specific gravity (density). The MF2RFM-BM96812H converts sugar content (% Brix) to Baumé degree. This is based on a table from the AOAC International approved method, allowing for reliable measurements. 1 Baumé degree is approximately equal to 1.8% Brix, and in fully fermented wine, it corresponds to about 1% alcohol.

Easy operation, measures salt content (sodium chloride) in seconds. The MF2RFM-SL96821H measures salt content (g/100g, g/100mL), specific gravity, Baumé degree, and temperature all in one device. The salinity meter for seawater (refractometer) is the MF2RFM-SL96822H.

Measures salinity (seawater) in about 1.5 seconds. The MF2RFM-SL96822H measures salinity (PSU, ppt), specific gravity, and temperature of seawater with one device. It is used for the analysis and management of natural and artificial seawater. The usage is very simple, allowing for quick and easy measurements. The salinity of table salt is measured with the MF2RFM-SL96821H.

Easy operation, measurement in seconds. The MF2RFM-EG96831H and MF2RFM-PG96832H are industrial series that measure the concentration (% v/v) of ethylene glycol and propylene glycol, as well as freezing temperature. The MF2RFM-EG96831H is for ethylene glycol, while the MF2RFM-PG96832H is for propylene glycol.

The M3272PET-35-0000S is a highly accurate pocket-sized oxygen concentration meter capable of measuring a range of 0 to 100% using sensors. It employs two types of sensors particularly suitable for humid environments, ensuring excellent reliability and durability.

It has a function to check the oxygen concentration when performing nitrox diving and to display the maximum diveable depth at that concentration.

● High-resolution and high-precision measurement specifications ● Three-stage display with backlight, button operation for upside-down display ● Models with MOD calculation function for nitrox are also available ● HOLD/Min/Max display, auto power-off function ● Functional case design, waterproof housing, long battery life

● High-resolution and high-precision measurement specifications ● Three-stage display with backlight, button operation for upside-down display ● Model lineup with MOD calculation function for nitrox ● HOLD/Min/Max display, auto power-off function ● Functional case design, waterproof housing, long battery life