シロ産業 Product Lineup

Manage the history of measurement data on a computer with the option "Data Logger" for memory → save → transfer to computer. If you have purchased a drum lift with a digital scale that includes a display, it can also be added later. *If you are using the Data Logger with the M20XL-3ST, please inform us of this at the time of order. Additionally, the Data Logger must be prepared by the customer. Please choose a Data Logger that is compatible with the display.

Drum can carrier

■Equipped with easy-to-move casters. ■Can be poured with one hand.

It can hold two cylinders with a diameter of 140mm (1500L). *Delivery is made to the vehicle, so unloading by the customer is required.

Active in various sites such as air conditioning, construction, and welding. Ideal for transporting containers like Freon and small bottles. With sufficient load capacity, heavy containers can be easily transported.

It uses a link chain, and maintenance is also easy.

It is an electric lift that ascends and descends with just the push of a button.

● Safe and secure as it is a non-fuel air motor type ● Dedicated to JIS standard 200L closed drums (large plug G2) ● For low viscosity solvents (below 100cP) ● For dispensing only: Dispensing volume 20L/min (with nozzle) ● The motor head can be replaced The head (motor) part is easy to detach and can be replaced from air motor type to electric type. ● M58CEM1-V has a ball valve specification By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● M58CEM1-N comes with a manual gun nozzle The gun nozzle can be easily and conveniently operated with one hand. Squeeze to dispense, release to stop.

● Easy-to-use T-shaped handle. ● Enhanced safety with steps. ● Easy transportation with a three-wheel type. * For steel drums only. * For JIS standard 200L drums only. * Not suitable for drums without flanges or plastic drums.

● This is a transport vehicle specifically for 200L drums. ● It comes standard with a nylon belt to secure the drum.

Rust-resistant stainless steel. Its beautiful appearance and hygienic properties make it ideal for use in clean environments such as food and medical industries.

■Helium 7000L Cylinder Two-Wheel Transport Cart (Single Cylinder) / Part Number M1500SGBHE-70M Accessories for securing the cylinder are standardly equipped in two locations, top and bottom. ● For Helium 7000L ● Overall Length: 1200mm ● Overall Width: 390mm ● Wheel Diameter: 200mm ● Weight: 12kg

Liquid carbon dioxide gas cylinder transport vehicle. This transport vehicle has a minimum width of 620mm. LGC (Portable Ultra-Low Temperature Container).

This is a series of gas cylinder transport carts (cylinder carts) designed for one 500-liter cylinder, equipped with wheel stoppers. It can be quickly secured using a foot lever. We offer two models: a handle slide type with adjustable handle height and a normal type. The body color is available in five pastel colors: pastel green, pastel blue, pastel white, pastel pink, and pastel purple, allowing you to choose based on color-coding for different hospital rooms or wards. It features large 100mm wheels and casters for high stability, enabling smooth movement within the hospital during oxygen inhalation. All models come with wheel stoppers.

This is a stainless steel cylinder transport cart (cylinder cart) compatible with clean rooms, available in a 1500-liter series. We offer transport carts for one and two cylinders.

This is a cylinder container stand (cylinder stand) for the 7000-liter series.

Please use this for managing empty and filled gas cylinders, with color coding for each floor. It accommodates from 1 bottle to 10 bottles. Colors: Pastel Green, Pastel Blue, Pastel Purple, Pastel White, Pastel Pink. We offer two types: one with a rubber bottom that won't scratch the floor and a normal type.

This is a cylinder holder (cylinder stand) for the 500-liter series. It allows you to attach heavy cylinders without lifting them. It has four pre-drilled holes with a diameter of 10mm for anchor fixing. *Custom-made options are available for 20 bottles, 30 bottles, and other configurations to suit your usage environment.

This is a cylinder container stand (cylinder stand) for the 1500-liter series.

Stainless steel cylinder holder compatible with clean rooms (cylinder stand) for 7000 liters. We offer holders for 1 to 5 cylinders.

The pallet type is a drum can transport device designed to load or unload drum cans stacked on a pallet. Unlike the standard type, it has a different foot width and length, and a balance weight is placed on the swivel wheel side to prevent tipping.

Viscosity reduction, freeze prevention, heat retention Reduces the viscosity of the liquid and improves its fluidity. By installing heaters on the four outer sides of the tank, the viscosity of the liquid inside the tank is effectively reduced.

When a water shortage occurs, the red LED on the display blinks to notify of the water shortage. Additionally, remote monitoring is possible through external alarm contacts. There is also a simple type that only requires visual inspection.

■Features ● The power assist for the lifting section allows for easy fine-tuning of the input amount. ● The input angle can be freely adjusted.

It is ideal for small dispensing of contents.

● The weight has been reduced. Achieved 100kg despite being a drum inverter. Weight reduction (approximately 10% compared to standard M20M-1100S) ● It has become more compact. Despite being a drum inverter, the turning radius has become as small as that of a transport vehicle (R1135mm). Overall width, length, and height have been reduced. * The overall length is a minimum of 1010mm when the pedal is folded. ● Equipped with a swivel chuck <patented by the manufacturer> The swivel chuck makes it easier to grasp the drum and allows for more secure locking.

●The gripping device features a one-touch chucking mechanism. ●Equipped with a safety valve to prevent overload. ●The bottom has a double rib structure for reinforcement. ●Includes a powerful foot-operated brake system.

By changing the position of the reversing rail, the input height can be freely set (1150 to 1400 mm: every 50 mm).

Complete oil-free and clean due to all-air conversion of the lifting section.

This is an insulation jacket used for wrapping various types of rubber heaters for drum cans, pail cans, and one-gallon cans. By wrapping the insulation jacket, heat radiation from the can body and the heater surface can be suppressed, making it an energy-saving product that can reduce power consumption during heating to less than half. It can be installed while the heater is wrapped (the heater is sold separately).

Rust-resistant stainless steel

The jacket heater that envelops the entire drum can heat and maintain temperature without losing heat. Compared to band heaters that wrap around a part of the drum, it is energy-efficient, has high insulation performance, and does not get hot on the surface.

●Easy to carry (lightweight) ●Liquid level can be checked with 10 levels of LED. ●Can be used with both 100V power supply and batteries when using an AC adapter.

The manual one-gallon can inversion machine solves the following problems: ● When inverting multiple one-gallon cans, the handle digs into the hand and is painful. ● The pouring task puts a strain on the lower back and is difficult. ● Adjusting the amount during pouring is challenging, leading to a lot of waste. ● The inversion of one-gallon cans is primarily a male-dominated task, resulting in high labor costs.

M2253M-500KG with a proven track record in grounding operations.

■Features Brake lever 75φ small wheel brake Main wheel auxiliary brake

Maximum load capacity 120kg Vehicle dimensions Overall height 1360mm × Overall width 500mm

● Smooth transportation is possible. ● You can choose from three types of tires: black rubber, air-filled tires, and puncture-proof tires.

Conventional minimum diameter from 25.4 to 38mm! Adopts a large-capacity full bore valve! Even high-viscosity liquids that couldn't flow before can now flow smoothly! The base part is swivel, allowing for nozzle direction adjustment after installation!

● The M1340K-20SK and WSK can accommodate pails with an outer diameter of 270 to 286 mm. ● Assembly is very easy!

Just tilt it and it's okay. No oil spills, safe, economical, and clean. Holder inner diameter 282mm. Easy to set the can.

● Cylinders up to 1270mm in height can be loaded. ● Two support bars for the cylinders have been installed on the back. * The maximum load for transporting up stairs is 60kg.