シロ産業 List of Products and Services

It is possible to attach and cut two strips of tape (7 to 20 mm width). Of course, standard single cuts are also possible. This improves the efficiency of the labor-intensive tape application! Performance and Features: ● A convenient fully automatic machine that can use various tapes from 7 to 50 mm in width. ● Automatic feeding and cutting with cut dimensions set in 1 mm increments. ● Two-strip attachment and cutting for cellophane tape of 7 to 20 mm width. ● Pressure-equipped 3-inch reel and static electricity prevention device. ● Empty cutting prevention function (automatically switches from auto to manual and stops when the tape runs out). ● Motor overload prevention function (automatically switches from auto to manual and stops if the tape wraps around the roller). ● Numeric memory function (displays the same dimensions again even after power is turned off). ● Electronic sound and red lamp to notify machine status (power on, tape run out, jam, malfunction, function change).

• Other packaging machines

This is an introduction to the "Joanville Micrometer" handled by Shiro Sangyo Co., a specialized online shopping site for measuring, packaging, and logistics equipment that selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Straight spindle with jaws ■Ratchet simple ■IP54 (dust and splash proof) ■Hardened anvil ■With thermal conduction prevention pad ■Hammer tone painted frame ■Includes standard rod* / adjustment key ■Plastic case ■Digital display height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

This is an introduction to the "Universal Micrometer" handled by Shiro Sangyo Co., a specialized online shopping site for measuring instruments, packaging equipment, and logistics equipment, which selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Interchangeable straight spindle ■Ratchet simple ■Includes flat, disc, spline, cone, V-type, blade, and point hardened anvil ■IP54 (dust and splash proof) ■Includes thermal conduction prevention pad ■Hammer tone painted frame ■Includes standard rod* / adjustment key ■Plastic case ■Digital number height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

This is an introduction to the "Brake Disc Micrometer" handled by Shiro Sangyo Co., a specialized online shopping site for measuring, packaging, and logistics equipment that selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Ratchet simple ■With heat conduction prevention pad ■Measuring surface with carbide tip ■Hammer tone painted frame ■With reference rod* / adjustment key ■Plastic case ■Conical angle 60°, tip radius 0.15mm ■Digital number height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

This is an introduction to the "Large Micrometer" handled by Shiro Sangyo, a specialized online store for measuring, packaging, and logistics equipment, which selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Measuring surface with carbide tips ■Ratchet simple ■Forged frame ■Heat conduction prevention pad included ■Hammer tone painted frame ■Includes standard rod / adjustment key ■Wooden box ■Digital number height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

This is an introduction to the "Point Digital Micrometer" handled by Shiro Sangyo, a specialized online shopping site for measuring, packaging, and logistics equipment, which selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Measuring surface with carbide tip ■Ratchet simple ■IP54 (dust and splash waterproof) ■Heat conduction prevention pad included ■Hammer tone painted frame ■Includes standard rod* / adjustment key ■Plastic case ■Digital number height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

This is an introduction to the "3-Groove V Anvil Micrometer" handled by Shiro Sangyo, a specialized online store for measuring, packaging, and logistics equipment, which selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Ratchet simple ■Measuring surface with carbide tip ■Heat conduction prevention pad included ■Hammer tone painted frame ■Includes standard rod / adjustment key ■Plastic case ■Digital number height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For more details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

No need for rope hanging, making assembly and disassembly easy! Square water tank for drinking water 【Features】 ○ The outer frame is made of lightweight steel, sturdy and long-lasting ○ No need for rope hanging, making assembly and disassembly easy (channel fixed type) ○ Being assembled, it is compact for storage ○ Excellent durability due to the use of tarpaulin (PVC sheet with reinforcement fabric) ○ Excellent airtight structure due to high-frequency welding processing ○ Easy to repair ○ The assembled tank for drinking water meets the water quality standards of the Water Supply Act.

• Piping Materials

From corner to corner... a high-performance flashlight that appears square. Unlike typical flashlights, which illuminate only the center and leave the edges dim, this new type of HD torch allows you to check a wide area. ■□■ Features ■□■ ■ Unlike conventional round lights that are bright in the center and blurry around the edges, the HD torch uniformly illuminates every corner in a square shape. ■ By illuminating a large area, you can perform inspection tasks without unnecessarily moving the light, maintaining a wide field of view. ■ There is very little difference in brightness between the center and the edges, and glare is also reduced. ■ It illuminates uniformly in a square shape, allowing you to check a wide area at once. ■ Equipped with a unique focusing system that minimizes the difference between the center and the edges. ■ The wide illumination range allows for checking without unnecessary movement of the light. ■ Powerful brightness of 165 lumens. * 1 lumen is the brightness at hand when a lit candle is placed 1 meter away. ■ Continuous lighting time: 90 minutes. ■ Sturdy body made of aircraft-grade aluminum. ■ For more details, please download the catalog or contact us.

• Other lighting equipment

This is an introduction to the "Disc Anvil Micrometer" handled by Shiro Sangyo, a specialized online shopping site for measuring, packaging, and logistics equipment that selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Straight spindle with display ■Ratchet simple ■IP54 (dust and splash proof) ■Hardened anvil ■With heat conduction prevention pad ■Hammer tone painted frame ■With reference rod* / adjustment key ■Plastic case ■Digital number height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

This is an introduction to the "Pipe Micrometer" handled by Shiro Sangyo, a specialized online shopping site for measuring, packaging, and logistics equipment, which selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Measuring surface with carbide tip ■Ratchet mechanism ■Chrome-plated matte sleeve ■Includes standard rod* / adjustment key ■Plastic case ■Digital display height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For more details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

Navigate back to your original location from a distant place using "arrows" and "remaining distance"! A compact location finder equipped with a high-sensitivity lever. ■□■ Features ■□■ ■ Can memorize (mark) up to three favorite locations, and no matter how far away you are, it will tell you the "distance" to the marked point and the direction to go with an "arrow." ■ Displays the "remaining distance" and "direction arrow" to the marked point. ■ In compass mode, it shows the direction (360° display) with automatic calibration. ■ Displays over 1000m automatically switches to km display (maximum display 999km). ■ The display is readable in the dark with a night backlight. ■ No map data required. Usable overseas. ■ Can be carried with the power off except during marking or navigation. ■ Equipped with a high-sensitivity SiRF Star III GPS receiver. ■ Water-resistant design (usable in all weather). ■ Power: 2 AA batteries. ■ For more details, please download the catalog or contact us.

• Other electronic parts
• Other network tools

After using it as a cold pack, it can be used as a deodorizer! (Unscented type) A cold pack that can be used without being thrown away, eco-friendly for the Earth. ■□■ Features ■□■ ■ A cold pack that can be reused as a deodorizer by enclosing a substance with deodorizing effects in the contents that have previously become household waste. ■ Absorbs odors and naturally evaporates. ■ For other functions and details, please download the catalog or contact us.

• Cooling system
• Food environmental hygiene/contamination prevention equipment
• others

This is an introduction to the "Screw Anvil Micrometer" handled by Shiro Sangyo Co., a specialized online shopping site for measuring, packaging, and logistics equipment, which selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Interchangeable straight spindle ■Ratchet simple ■IP54 (dust and splash proof) ■With thermal conduction prevention pad ■Hammer tone painted frame ■Includes reference rod* / adjustment key ■Plastic case (anvil for inch screws sold separately) ■Includes 6 sets of metric screw pitch measuring anvils (for 0.4mm-7mm anvils) ■Digital number height 7.5mm ■ABS/INC preset ■Tolerance data output ■Battery used: SR44 ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

This is a guide to the industrial endoscope scope, which adopts a 12V rechargeable lithium-ion battery, significantly reducing running costs compared to traditional disposable batteries. ■□■Features■□■ ■The industrial endoscope camera MI1M-12SET comes with the main unit, camera cable, rechargeable lithium-ion battery, and charger, all delivered in a hard carrying case. ■MI1M-12SET - The image can be magnified up to twice, allowing you to see very small objects. - To obtain bright and clear images of the inspection object, the brightness of the high-brightness LED light can be adjusted in three levels. ■MI1M-12SET - When fully charged, it can be used continuously for 15 hours. ■For other functions and details, please download the catalog or contact us.

• Image Processing Equipment
• Industrial Endoscope

This is the most commonly used fighter tape. In most cases, this tape is used.

• Other measurement, recording and measuring instruments

Easily and simply measure odors! An odor sensor ideal for checking the performance of deodorizing devices and air purifiers, managing food quality, and measuring factory exhaust odors.

• Other measurement, recording and measuring instruments

A system for quantitatively evaluating the sample surface by dropping water droplets onto the sample surface and measuring the contact angle of the water. ■□■Features■□■ ■Dedicated measurement software with PC image analysis displays droplet images, and by using the mouse, the contact angle is automatically displayed by clicking three points for curve fitting of the droplet image using the θ/2 method. ■Droplet images can be saved in bmp format. ■Compatible with Windows XP and Vista (optional). ■Display of droplet images. ■External output and saving of image data. ■For more details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

Packaging bags with extremely low electrical resistance values due to the effects of conductive carbon. ■□■Features■□■ ■Resistance value: 5×10^14Ω (20℃/50%) ■Black opaque ■Optimal for packaging items that require static electricity prevention and dust protection, such as semiconductor devices, electronic circuit boards, measuring instruments, and precision equipment. ■For more details, please download the catalog or contact us.

• Packaging materials

Easy operation for clean cutting! Bubble Wrap Cutter ■□■ Features ■□■ ■ Simply set the roll, pull out the desired length, and slide the cutter for easy operation. ■ When changing the material to be cut, the blade can be replaced with a single touch. ■ Economical with no waste; you can cut only the desired length, eliminating excess like standard-sized sheets. ■ Versatile use with a cutter suitable for different types of rolls. ■ Insert a core pipe into the inner diameter of various rolls and secure the roll firmly with a clamp ring (33-38mm) to complete the setup. ■ The cutting unit and roll unit can be easily assembled; since the units can be installed separately, integrating them into a packaging system is simple. ■ For more details, please download the catalog or contact us.

• Other metal materials

Energy-saving features reduce CO2 emissions! Earth-friendly eco shrink tunnel ■□■Features■□■ ■Energy-saving Eco Tunnel By using the standby function, unnecessary CO2 emissions during breaks are minimized. *Control of CO2 emissions equivalent to driving approximately 900 km with a car that has a fuel efficiency of 10 km/l. ■Electricity Cost Savings Controlling CO2 emissions means controlling power consumption, which can also save on electricity costs. *Assuming 25 yen per kWh, an annual savings of about 14,000 yen is possible. ■Beautiful Finish With interval control, airflow and conveyor speed can be adjusted freely. ■For more details, please download the catalog or contact us.

• Heating device
• Other packaging machines

Durometer (Spring-type Rubber Hardness Tester) for measuring hardness, which is important for the property display of various rubber, elastomer, and plastic products. ■□■ Features ■□■ ■ Portable and extremely easy to use ■ Non-destructive testing ■ Type A: Mainstream for measuring the hardness of various rubber products ■ Type D: Measuring the hardness of hard rubber and plastics ■ Type E: Measuring the hardness of soft rubber and plastic foam ■ Type B: Suitable for samples that are slightly harder than those measured by Type A ■ Type C: A model for measuring the hardness of soft rubber, various foams, rubber rolls, thread-wound hardness, film-wound hardness, and other soft samples like clay ■ Type C2: A model for measuring the hardness of soft rubber, sponge, foam elastomers, as well as thread-wound hardness, film-wound hardness, and other soft samples like clay ■ Type SCS: Can measure samples with high rebound force ■ Type CSC2: For measuring the hardness of even softer soft sponges and plastic foams ■ Type F: Designed for various foams like urethane foam and sponge, which are difficult to measure ■ Type FP: Specifically for measuring the hardness of particularly soft samples ■ Type JA: Rubber hardness tester compliant with the old JIS K 6301 standard.

• Other measurement, recording and measuring instruments

Ultrasonic one-push powerful welding! A stapler that is easy to use even for beginners. ■□■ Features ■□■ ■ The battery-powered unit can be secured around the waist with a band, allowing work to be done anywhere without needing a specific location. ■ No metal staples (stapler pins) are used, so there is no risk of injury. ■ No metal staples, tape, or rubber bands are used, resulting in no waste. ■ There is no risk of foreign object contamination, so there is no concern about accidental ingestion. ■ Capable of welding thermoplastic products made of PSP/PP/PVC/OPS/HIPS/A-PET. ■ Instant welding of materials with just one finger using friction heat generated by ultrasonic vibrations at 80,000 times per second. ■ Safe and secure as it does not use heat sources like heaters. ■ Welding time can be adjusted with a timer according to the material and application. ■ For more details, please download the catalog or contact us.

• Other work tools

Industrial Video Endoscope with a slim camera tube of 5.5mm diameter for easy observation in narrow spaces. ■□■ Features ■□■ ■ Easy observation in narrow spaces with a slim camera tube of 5.5mm diameter ■ Equipped with four LED lights at the camera tip ■ Simple operation for anyone, anywhere ■ Large TFT display for easy viewing ■ One-button recording for images and videos ■ Tube extension possible up to 30m (optional: standard included is 1m) ■ CROWN camera tube tip - Clear observation even in dark areas - Scratch-resistant design that reduces stray light interference - Easy cleaning and wiping of the camera tube tip - Capable of capturing images with high resolution ■ For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments
• Industrial Endoscope

Supports from 2N to 2500N (0.2kg to 250kg)! A force gauge stand capable of various tests. 【Features】 ○ Moves up to 400mm ○ Supports various test conditions with feed speeds of 10 to 400mm/min ○ Displays distance and load in graph form Uses dedicated data acquisition software to import measurement values to a computer It is also possible to simultaneously capture the stand's travel distance and the force gauge's load data ○ LCD display on the operation panel Key switch layout designed for ease of use (Mode switching, feed speed settings, distance and feed speed display) ○ Equipped with an emergency stop switch ● For other functions and details, please download the catalog.

• Testing Equipment and Devices

This is an introduction to the "Rotary Scribers Height Gauge" handled by Shiro Sangyo Co., Ltd., a specialized online shopping site for measuring instruments, packaging equipment, and logistics equipment, which selects and provides better products and services from around the world. 【Features】 ○ ABS/INC measurement ○ Judgment function ○ The measuring surfaces of the two scribers that "rotate" are on the same plane ○ As it is an Absolute (ABS) type, there is no need to zero set every time the power is turned on ○ Zero setting can be done at any position, allowing for comparative measurement ○ Easy reading with digital display ● For other functions and details, please download the catalog.

• Other measurement, recording and measuring instruments

Non-contact phase detector that can be safely measured over the insulation of electric wires ■□■Features■□■ ■Ability to check for the presence or absence of phases and confirm the grounded phase during delta connection ■Compatible with wire sizes from 2mm² to 325mm² (IV) (outer diameter finish φ2.4mm to 30mm) ■Check phase sequence and absence of phases with LED and buzzer ■Automatically recognizes the grounded phase during delta connection and displays it with LED blinking ■Equipped with a magnet for installation inside distribution boards ■Wide measurement voltage range of three-phase AC from 70 to 1000V ■LED lighting function for clear visibility even in daylight ■Complies with international safety standards IEC 61010-1 CAT.IV 600V, CAT.III 1000V ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

A strapless bundling machine with a structure that makes operation, adjustment, and repair very easy. ■□■Features■□■ ■ By using the same parts for the interlock die and punch, it has a reversible structure that reduces the cost of consumable parts and extends the replacement cycle. ■ Band size used: - 16mm type: 0.4-0.6mm - 19mm type: 0.4-0.6mm - Machine weight: 3.4kg ■ For more details, please download the catalog or contact us.

• Binding/Packing Machine

The compression gauge is a gauge specifically for measuring pressure.

• Other measurement, recording and measuring instruments
• others

Just fill the hole and step on it, a material for repairing uneven road surfaces.

• Other conveying machines
• Other processing machines
• others

This is a non-contact laser device that uses a wavelength of 635 nm (red). It is ultra-compact, ultra-lightweight, has good convergence, and achieves a long lifespan. It can be used in a wide range of applications for cutting, such as in lumber, woodworking, building materials, paper, textiles, and various other fields for tasks like straight line projection, alignment, leveling, and orientation.

• Electron beam lithography equipment
• Marking machine
• Laser marker

Four times the strength of concrete. A concrete repair material that hardens in about 15 minutes.

• Other conveying machines
• Other processing machines
• others

In addition to data collection using the separately sold communication port and data collector, data collection via infrared communication with mobile phones has also become possible.

• others
• Other electronic measuring instruments

■Features ●High-resolution model ●Weighing modes (weight, animal, count, check weighing, %, display value hold) ●Standard ball for display section included

• others
• Other electronic measuring instruments

This is an introduction to the "Blade Anvil Micrometer" handled by Shiro Sangyo, a specialized online store for measuring, packaging, and logistics equipment that selects and provides better products and services from around the world. ■□■Features■□■ ■Compliant with DIN 863 ■Blade-type straight spindle ■Ratchet simple ■IP54 (dust and splash proof) ■Hardened anvil ■With thermal conduction prevention pad ■Hammer tone painted frame ■With standard rod* / adjustment key ■Plastic case ■Digital number height 6mm ■ABS/INC preset ■Data output ■Battery used: SR44 ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

Unlike conventional skin measurement devices that ignore the environment, this skin measurement device takes environmental factors into account and is useful for more accurately assessing the health condition of the skin.

• others
• Other electronic measuring instruments

Compact ultrasonic cleaning machine ideal for precision cleaning of small parts and experimental equipment, as well as for stirring, emulsifying, and dispersing liquids. ■□■ Features ■□■ ■ Quieter and more precise cleaning ■ A wide variety suitable for use in various fields, including scientific and industrial applications ■ The ultrasonic transducer employs a bolted design known for its durability and reliability to ensure stable performance over a long period ■ Standard equipped with a drainage cock (except for M1029T-106/M1029T-106H) for easy disposal of cleaning solution ■ The heater type is equipped with a heating function, allowing for even more precise cleaning at optimal temperatures ■ The exterior of the main unit is made of corrosion-resistant stainless steel (the control panel is made of resin) ■ Timer equipped with settings from 1 to 60 minutes in 1-minute increments ■ For more details, please download the catalog or contact us.

• Other cleaning machines
• Ultrasonic Oscillator
• Ultrasonic Cleaner

Sterilization using ethylene oxide gas (EOG) requires high-level temperature management. Proper sterilization of instruments used in the medical field, as well as pharmaceuticals, cosmetics, and food, is extremely important. The MI1TP-1000ISE is specially designed for the validation of EOG sterilizers and automatically records the temperature during the EOG sterilization cycle at specified intervals. The MI1HP-1000LG is compliant with intrinsic safety standards Class I, Division 1, Groups A, B, C, and D, allowing it to be placed directly inside the EOG sterilizer.

• Temperature and humidity measuring instruments
• Other measurement, recording and measuring instruments
• Other environmental equipment

This is a non-contact light guide device using a wavelength of 635nm (red). It is ultra-compact, ultra-lightweight, has good convergence, and achieves a long lifespan. It can be used for a wide range of applications such as straight line projection, alignment, leveling, and orientation during cutting in fields like lumber, woodworking, building materials, paper, textiles, and more.

• Laser Components
• Laser marker

This is a non-contact optical alignment device using a He-Ne laser with a wavelength of 632.8 nm (red). It can be used for a wide range of applications in various fields such as lumber, woodworking, building materials, as well as for cutting steel plates, steel pipes, glass, plastic, paper, textiles, etc., for tasks like straightening, alignment, leveling, and orientation.

• Laser Components
• Laser marker

This is a non-contact light guide device that uses a wavelength of 635nm (red). It is compact, lightweight, has good convergence, and achieves a long lifespan. It can be used for a wide range of applications in various fields such as lumber, woodworking, building materials, paper, textiles, and more, for tasks like straight line projection, alignment, leveling, and orientation during cutting. The mounting bracket is optional.

• Laser Components
• Laser marker

This series is a non-contact optical measuring device that uses a visible light semiconductor laser with a wavelength of 635nm (red). It combines a special collimator lens and a slit lens with an LD element (laser semiconductor), and has been thoroughly designed for electrostatic protection, noise reduction, and heat dissipation, resulting in a compact, lightweight, and highly efficient series with good convergence. Additionally, it has been designed with sufficient consideration for current control to achieve a long lifespan. The mounting bracket is optional.

• Laser Components
• Laser marker

- Ultra-high sensitivity Adopts a laser scattering light method, measuring from 0.0001 to 2 degrees with a resolution of 0.0001 degrees. - Easy operation Simply flow the sample liquid into the cell online for easy measurement. - Excellent expandability Multiple sensors, such as turbidity sensors, can be connected. - Simple maintenance Allows for long hours of continuous use without calibration.

• Other measurement, recording and measuring instruments

Cleaning and dust collection of brake drums, interiors, putty powder, cutting powder, floor surfaces, etc.! A portable dust collector that helps improve the working environment. ■□■Features■□■ ■Uses two 1100W single-phase motors ■Ideal for dry dust ■Microfilter (optional) can be used ■Automatic start/stop function for air-powered tools ■Easy mobility with large-sized wheels ■Portable type, can be used near vehicles ■Powerful suction for floor cleaning ■Standard equipped with filter cleaning function ■Easy processing with large capacity (28L) dust box ■Automatic start/stop function included ■For other functions and details, please download the catalog or contact us.

• Dust collector
• Industrial Vacuum Cleaners

Deep type, round type, square type cup series

• Other food machinery
• others
• Packaging materials