91~135 item / All 196 items
Displayed results
Filter by category
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationContact this company
Contact Us OnlineBefore making an inquiry
Download PDF91~135 item / All 196 items
Filter by category
A structure combining a NAFION® gas dryer and a desiccant canister. The gas sample flowing through the dryer only comes into contact with the NAFION tube, selectively removing moisture while preserving the gas components in the sample gas.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationA structure combining a NAFION® gas dryer and a desiccant canister. The gas sample flowing through the dryer only comes into contact with the NAFION tube, selectively removing moisture while preserving the gas components in the sample gas.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe product consists of a sensor and an amplifier display, is lightweight, and makes on-site transportation easy. When the sensor is inserted into the web rotation surface and a load is applied, the load value is displayed on the instrument.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe product consists of a sensor and an amplifier display, is lightweight, and makes on-site transportation easy. When the sensor is inserted into the web rotation surface and a load is applied, the load value is displayed on the instrument.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration★ Heine Company manufactures cantilever (single-sided) load cells for narrow web applications. ★ It is specifically designed for tension measurement of narrow wire materials such as tape, fiber, and wire cables. For more details, please contact us or download the catalog.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationSince it is a bolt type, it can be easily replaced if existing products are mounted on the fork head. Additionally, the ease of installation allows for cost reduction when upgrading the load cell.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Hene XYR series is a load cell that measures the load of both XY axes with a single unit. In web tension applications, it continuously provides accurate tension measurements even when there are changes in the wrap angle. It allows for biaxial measurement from just one side without needing to be installed at both ends of the axis, leading to cost savings.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationHeine Corporation manufactures several types of radial force (flange type) load cells. All products have no mounting directionality for the web axis, allowing for proper installation in any measurement direction around the entire circumference, ensuring the effectiveness of the measurements. The sensors are of the double beam type, offering a good overall error of 0.5% along with robustness.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe TSW series from Heine is a load cell specifically designed for tension measurement of wires. The product comes with measuring and guide rollers, and it is compact and lightweight, making it easy to install on machinery.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe sensors are available in various types including electromagnetic, electromagnetic eddy current, and inductive types, accommodating both ferrous and non-ferrous materials. We offer a wide range of products, from inexpensive ones that are easy to teach to those compatible with various field buses, depending on the application. For ferrous materials, detection is possible for thicknesses up to 8mm, and for non-ferrous materials, up to 15mm. There are also products that allow for the connection of four sensors to a single controller, enhancing work efficiency and reducing costs.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe sensors are available in various types including electromagnetic, electromagnetic eddy current, and inductive types, and can accommodate both ferrous and non-ferrous materials. We offer a wide range of products, from inexpensive options that are easy to teach to those compatible with various field buses, depending on the application. For ferrous materials, detection is possible up to a maximum thickness of 8mm, and for non-ferrous materials, up to 15mm. There are also products that allow for the connection of four sensors to a single controller, enhancing work efficiency and reducing costs.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe sensors are available in various types, including electromagnetic, electromagnetic eddy current, and inductive types, and can accommodate both ferrous and non-ferrous materials. We offer a wide range of products, from inexpensive ones that are easy to teach to those compatible with various field buses, depending on the application. For ferrous materials, detection is possible up to a thickness of 8mm, and for non-ferrous materials, up to 15mm. There are also products that allow for the connection of four sensors to a single controller, enhancing work efficiency and reducing costs.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Steriflow Mk96 series uses 316L stainless steel for the wetted parts, and after mechanical polishing, it undergoes electropolishing treatment. Designed to have a structure without liquid pockets and to accommodate CIP/SIP, this product is ideal for use in sanitary processes. In addition to the stability of the set pressure, the shut-off characteristics can also achieve ANSI Class VI with optional features.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Steriflow Mk96 series uses 316L stainless steel for the wetted parts, and after mechanical polishing, it undergoes electropolishing treatment. Designed to have a structure without liquid pockets and to accommodate CIP/SIP, this product is ideal for use in sanitary processes. In addition to the stability of the set pressure, the shut-off characteristics can also achieve ANSI Class VI with optional features.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Steriflow Mk96 series uses 316L stainless steel for the wetted parts, and after mechanical polishing, it undergoes electropolishing treatment. Designed to have a structure without liquid pockets and to accommodate CIP/SIP, this product is ideal for use in sanitary processes. In addition to the stability of the set pressure, the shut-off characteristics can also achieve ANSI Class VI with optional features.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Steriflow Mk96 series uses 316L stainless steel for the wetted parts, and after mechanical polishing, it undergoes electropolishing treatment. Designed to have a structure without liquid pockets and to accommodate CIP/SIP, this product is ideal for use in sanitary processes. In addition to the stability of the set pressure, the closing characteristics can also achieve ANSI Class VI with optional features.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Steriflow Mk95 back pressure regulator is made of 316L stainless steel and is a product specifically designed for sanitary processes, featuring a structure without liquid traps, surface finishing, and compatibility with CIP/SIP. It has a proven track record not only in pharmaceutical manufacturing processes but also in food and chemical manufacturing processes, and is highly regarded for its stable controllability. When a simple diaphragm valve does not meet control requirements, and the use of expensive control valves is hesitated, a self-operated back pressure regulator achieves both good controllability and cost reduction.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Steriflow Mk95 back pressure regulator is made of 316L stainless steel and is a product specifically designed for sanitary processes, featuring a structure without liquid accumulation and surface finishing, as well as compatibility with CIP/SIP. ★ It has a proven track record in pharmaceutical manufacturing processes, food, and chemical manufacturing processes. ★ Stable control performance. ★ When a simple diaphragm valve does not satisfy control requirements, and the use of an expensive control valve is hesitated, a self-operated back pressure regulator achieves both good control performance and cost reduction. <Track Record and Applications> It is used in the bypass system of pumps or compressors at the outlet in pharmaceutical, food, beverage, chemical, bio, and semiconductor processes for primary pressure control. In addition to manual setting, there is also an air pressure signal setting type, allowing for remote operation. For more details, please download the catalog or contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Steriflow Mk95 back pressure regulator is made of 316L stainless steel and is a product specifically designed for sanitary processes, featuring a structure without liquid traps, surface finishing, and compatibility with CIP/SIP. It has a proven track record not only in pharmaceutical manufacturing processes but also in food and chemical manufacturing processes, and is highly regarded for its stable control capabilities. When a simple diaphragm valve does not meet control requirements, and the use of expensive control valves is hesitated, a self-operated back pressure regulator achieves both good control and cost reduction.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe Steriflow Mk95 back pressure regulator is made of 316L stainless steel and is a product specifically designed for sanitary processes, featuring a structure without liquid traps, surface finishing, and compatibility with CIP/SIP. It has a proven track record not only in pharmaceutical manufacturing processes but also in food and chemical manufacturing processes, and is highly regarded for its stable controllability. When a simple diaphragm valve does not meet control requirements, and the use of expensive control valves is hesitated, a self-operated back pressure regulator achieves both good controllability and cost reduction.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration★When supplying steel strips to a stamping press, the final end of the reel's unwind and the unwind section of a new reel are welded together for continuous transport, but detection of the weld joint must always be performed prior to the press process. ★In the case of a stamping press, the most important point for automating detection is that it must be conducted while the transport is repeatedly moving and stopping in a short time. ★The Roland NS9N is the first product developed specifically as a detector for narrow steel strips. For more details, please contact us or download the catalog.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationIt is possible to measure the liquid viscosity from a very small sample volume of 75μL, with a maximum pressure of 138MPa and a maximum temperature of 375°C. The viscosity range is from 0.2 to 20,000 cP, and the measurement ratio is subdivided into 13 ranges at 1:20, providing stable accuracy and reliability.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationReal-time viscosity measurement can be performed on the process line. The compact, field-mounted viscometer provides inline viscosity measurement and control capabilities in various process lines or process loops.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe device consists of a high-pressure sensor section and a setting/monitoring section, and it has a compact design suitable for tabletop use. The sensor operates electromagnetically with a falling piston, calculating the operating time based on viscosity. An RTD is installed in the sensor, allowing for viscosity measurements that are temperature-corrected by continuously measuring the actual temperature. The monitoring section features a menu-based display and input operations, enabling easy and accurate work.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe measurement principle is based on free fall, and the measuring part moves the piston back and forth using electromagnetic force. The structure is extremely simple and has good cleanability. The measurement range is 0-10,000 cP, subdivided into 12 ranges, with a measurement ratio of 20:1 for each range. <Features> - High precision, high reproducibility, low cost - Simple and durable - Quick measurement results - Minimal maintenance, almost negligible - Easy cleaning - High stability - calibration values are preserved for a long time
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration● It detects welding defects in pipes, wires, cables, rods, etc., using a non-contact eddy current sensor. ● It is compatible with minimum diameters of 1mm to maximum diameters of 90mm using several types of full-circle coil sensors. ● It has a resolution of 0.6mm at a material speed of 10m/s, allowing for sufficiently accurate recognition of defect locations.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe SIS XP, developed by the German company Roland, is a dedicated device for detecting defects in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal areas and splice sections of the steel wire cord material during the tire manufacturing process, and outputs that information. It employs up to 16 sensors and can detect issues such as wire pull-out, overlapping, and irregularities with a maximum inspection effective width of 1120mm, as well as determine and output the status of normal and abnormal splice sections based on pre-input data.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe SIS XP developed by Germany's Roland company is a dedicated device for detecting defects in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal areas and splice sections of the steel wire cord material during the tire manufacturing process, outputting that information. It utilizes up to 16 sensors and can detect issues such as wire pull-out, overlapping, and irregularities with a maximum inspection effective width of 1120mm, as well as determining normal and abnormal splice sections based on pre-input data and outputting the results externally.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe SIS XP developed by Germany's Roland company is a dedicated device for defect detection in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal sections and splice areas of the steel wire cord material during the tire manufacturing process, and outputs that information. It employs up to 16 sensors and can detect issues such as wire pull-out, overlapping, and irregularities with a maximum inspection effective width of 1120mm, as well as determining normal and abnormal splice areas based on pre-input data and outputting the results externally.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe SIS Vision developed by Germany's Roland company is a dedicated device for detecting defects in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal parts and splice parts of the steel wire cord material during the tire manufacturing process and outputs that information. Using up to 16 sensors, it detects issues such as wire pull-out, overlapping, and misalignment with a maximum inspection effective width of 1120mm, and determines normal and abnormal splice parts based on pre-input data, outputting the results externally. *For more details, please contact us or download the catalog!
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe SIS XP, developed by the German company Roland, is a dedicated device for detecting defects in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal areas and splice sections of the steel wire cord material during the tire manufacturing process, and outputs that information. Using up to 16 sensors, it detects issues such as wire pull-out, overlapping, and misalignment with a maximum inspection width of 1120mm, and determines normal and abnormal splice sections based on pre-input data for external output. *For more details, please contact us or download the catalog!*
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe SIS XP, developed by the German company Roland, is a dedicated device for detecting defects in tire steel wire cord materials. This device uses magnetic detection principles to continuously inspect the condition of abnormal areas and splice sections of the steel wire cord material during the tire manufacturing process, and outputs that information. It utilizes up to 16 sensors and can detect issues such as wire pull-out, overlapping, and irregularities with a maximum inspection effective width of 1120mm. Additionally, it determines normal and abnormal splice sections based on pre-input data and outputs the results externally.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe HAEHNE BZV-A/BZH-A load cells are small, lightweight, and highly reliable tension measurement sensors made from aircraft-grade aluminum and designed in a pillow block style. The measurement range is 0.1-0.5 kN, with an accuracy of 0.5% (combined error), making them suitable for use as tension detection sensors in various manufacturing processes.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe HAEHNE BZV-A/BZH-A load cells are small, lightweight, and highly reliable tension measurement sensors made from aircraft-grade aluminum and designed with a pillow block type. The measurement range is 0.1-0.5 kN, with a high accuracy of 0.5% (combined error), making them suitable for use as tension detection sensors in various manufacturing processes.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe BZV-A/BZH-A load cells manufactured by HAEHNE are small, lightweight, and highly reliable tension measurement sensors made from aircraft-grade aluminum and designed in a pillow block style. The measurement range is 0.1-0.5 kN, with a high accuracy of 0.5% (combined error), making them suitable for use as tension detection sensors in various manufacturing processes.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe HAEHNE BZV-A/BZH-A load cells are small, lightweight, and highly reliable tension measurement sensors made from aircraft-grade aluminum and feature a pillow block design. The measurement range is 0.1-0.5 kN, with an accuracy of 0.5% (combined error), making them suitable for use as tension detection sensors in various manufacturing processes.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe basic unit is a gas booster pump that pressurizes low-pressure helium gas to high pressure, using an air-driven gas booster manufactured by Haskel. The gas booster can be selected according to the required refill pressure and the capacity of the container, allowing for the most efficient combination of equipment.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe basic unit is a gas booster pump that pressurizes low-pressure helium gas to high pressure, using an air-driven gas booster manufactured by Haskel. The gas booster can be selected according to the required refill pressure and the capacity of the container, allowing for the most efficient combination of equipment.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe basic unit is a gas booster pump that pressurizes low-pressure helium gas to high pressure, using an air-driven gas booster manufactured by Haskel. The gas booster can be selected according to the required refill pressure and the capacity of the container, allowing for the most efficient combination of equipment.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe basic unit is a gas booster pump that pressurizes low-pressure helium gas to high pressure, using an air-driven gas booster manufactured by Haskel. The gas booster can be selected according to the required refill pressure and the capacity of the container, ensuring the most efficient combination of equipment.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationCVI Corporation is a specialized manufacturer of viscometers. CVI has developed numerous products to accommodate various applications. The measurement principle is based on a falling body method, where a piston moves within a cylinder, and the time taken to move is measured as viscosity by sequentially energizing two coils. The fluid is drawn into and expelled from the cylinder by the movement of this piston. As a result, the cylinder, which serves as the measurement chamber, is constantly refreshed with fluid, maintaining a fresh state. For laboratory use, we offer a small-volume viscometer that requires only 2ml of sample volume, as well as instruments capable of measuring the viscosity of a wide range of fluids up to temperatures of 185°C and pressures of 131MPa. In addition to laboratory models, CVI also manufactures a variety of process models using the same measurement principle, facilitating future expansion into process applications.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationHeine Company, as a specialized manufacturer of load cells in Germany, develops and produces equipment to meet a variety of applications. Our main products include pillow block type 100N-200kN, radial type 100-15kN, cantilever type 10-2000N, and compression type 0.2-1000kN. In addition, we offer bolt type, ring type, measuring roll type, and portable measuring type sensors, and we also accept orders for custom specifications. We have amplifier units available for each sensor. All of our products are highly precise and reliable, and we have received many opportunities for adoption from domestic machinery manufacturers.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe laboratory viscometer "VISCOlab series" is easy to operate, highly reliable, and has a wide measurement range, meeting the performance requirements of researchers. Additionally, it provides accurate results with a small amount of sample. It is used in various fields including oil, ink, paint, coatings, as well as a wide range of pharmaceuticals, chemicals, automotive fuels, motor oils, petrochemicals, printing, and biotechnology. 【Features】 ◆ High precision measurement values ◆ Easy maintenance and high performance ◆ Minimal sample requirement ◆ Over 8,000 units delivered worldwide *For more details, please download the catalog or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe "VISCOlab 3000" features an electronically controlled temperature regulation function, making it ideal for conducting high-temperature tests in environments where an independent constant temperature water bath is not available. It can measure temperatures up to 180°C, provided they are higher than room temperature, and with the optional cooling jacket, it can also measure low temperatures down to -40°C. The sensors can measure viscosity up to 20,000 cP with a range of 20:1, and continuous viscosity measurements, temperature data, and temperature-corrected viscosity values (TCV) can be obtained with just 1.5 ml of sample volume. 【Features】 ○ High precision measurements ○ Easy maintenance and high performance ○ Minimal sample volume required ○ Over 8,000 units delivered worldwide ● For more details, please download the catalog or contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationCambridge Viscosity (CVI), a specialized manufacturer of viscometers, is an international leader in fluid viscosity measurement. We develop and produce a wide range of products, from lab models to process control applications. We also have demo units available, so please contact us if you would like to request a demonstration! 【Features】 ● Innovative and highly efficient viscosity measurement technology ● Extremely high accuracy and easy maintenance ● Lab-type (for research and sampling) / process viscometers tailored to your application 【Product Lineup】 ■ A variety of lab (research) models convenient for sampling measurements ■ Process models - Real-time control within the line ⇒ Inline (installed in piping), intank (installed in tank), ultra-compact Various sensor shapes and sizes available to match installation conditions *For more details, please contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration