TAKAYA Corporation List of Products and Services

We are pleased to announce that Takaya Corporation's case study has been featured on the official website of i-PRO Co., Ltd. At our company, we have been addressing the challenge of developing a flying probe tester that allows for remote monitoring of the internal conditions of the device, thereby facilitating a swift initial response in the event of a problem. To solve this issue, we have equipped our latest models, the APT-2400F and APT-2600FD, with i-PRO Co., Ltd.'s network cameras as standard. By incorporating the cameras, we can monitor the internal state of the device in real-time, which has led to faster troubleshooting and enhanced quality control in the inspection process. In this case study, we provide detailed insights from the perspective of the development team regarding: - The background leading to the standard inclusion of cameras - The reasons for product selection - Operational innovations - The effects of the integration Please check the related link below for more information.

• Circuit Board Inspection Equipment

The "APT-2600FD" dual-side flying probe tester has received the "Nikkankogyo Shimbun 110th Anniversary Award" at the "55th Mechanical Industry Design Award IDEA" hosted by the Nikkankogyo Shimbun. The "APT-2600FD" dual-side flying probe tester is an in-circuit tester that accurately inspects the continuity and resistance values of printed circuit boards. The "flying probe" testing technology, which uses high-speed contact probes, was developed by Takaya as the world's first and continues to hold a top-class share globally. This product has undergone a model change for the first time in ten years, incorporating numerous advanced technologies, including sophisticated control functions to prevent board damage and a high-resolution image inspection system. It achieves a balance between inspection accuracy and work efficiency, establishing a new standard for quality assurance in electronic device manufacturing. This award is a testament to the high evaluation of our technological capabilities and product design, serving as a significant encouragement for further technological innovation in the future. We would like to express our heartfelt gratitude to all those involved in the development, manufacturing, and implementation of this product, as well as to the judges who provided valuable feedback and evaluations during the award process.

• Circuit Board Inspection Equipment

Takaya Corporation has announced a new model of its flying probe tester, the "APT-2400F/APT-2600FD series," which reliably detects various defects in printed circuit boards through ultra-high-speed inspection. Equipped with cutting-edge inspection technology that can check the placement and connections of fine components with high precision, it ensures that even minor defects and risks are not overlooked, strongly supporting the improvement of product quality. Additionally, thanks to the company's unique control mechanisms and sensing technology, reliable inspections can be achieved even in fluctuating environments, contributing to quality management by reducing recall risks. Furthermore, it features a user-friendly interface that anyone can intuitively operate, helping to alleviate burdens in workplaces where labor shortages are becoming serious, while still ensuring high inspection accuracy and contributing to increased productivity. *For more details, please download the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments

Takaya Corporation has been highly recognized for its technical uniqueness and future potential in the development of a flying-type in-circuit tester equipped with new technology, receiving the Encouragement Award at the "21st JPCA Award" organized by the Japan Electronics Circuit Industry Association. The JPCA Award is a system that honors outstanding products and technologies that contribute to the development of electronic circuit technology and related industries, and it is conducted for exhibitors at the exhibition "JPCA Show 2025 (Total Solution Exhibition for Electronic Devices 2025)" organized by the association. In this award, a rigorous examination is conducted by a selection committee composed of experts from academia, the electronic circuit industry, and specialized magazine editors, based on perspectives such as 'originality (uniqueness and originality)', 'potential for development and future in the industry', 'reliability', and 'relevance to current trends'. In 2025, five outstanding technologies and products were selected as the "21st JPCA Award". Our company has received this award for two consecutive years, following last year. We would like to express our heartfelt gratitude to the selection committee members and all those who have supported and cooperated with us.

• Circuit Board Inspection Equipment

Takaya Corporation (Headquarters: 661-1 Ihara Town, Ihara City, Okayama Prefecture; President: Ryuji Okamoto) has received the "Technology Award" from the Japan Institute of Electronics Packaging (hereinafter referred to as "JIEP"). This award is one of the honors given by JIEP to recognize achievements and contributions related to the development and education of packaging technology, primarily awarded to technologies that have significantly contributed to the advancement of electronics packaging technology. We, the employees of Takaya Corporation, are truly honored to have received the prestigious "Technology Award" for our flying probe tester. We would like to express our deep gratitude to all those involved in the development of this technology for their efforts and passion, as well as to our customers and partners who have supported us. Takaya Corporation will continue to pursue "technologies that bring innovation to the manufacturing field" and contribute to the further development of the electronics packaging sector.

• Circuit Board Inspection Equipment

Thank you very much for visiting the Takaya Corporation booth at the "Electronic Equipment Total Solution Exhibition 2025," held at Tokyo Big Sight from June 4 (Wednesday) to June 6 (Friday). On that day, we showcased our new model "APT-2600FD-A" from the Industrial Equipment Division, which garnered significant interest due to its high-precision probing technology and unique sensing mechanism. Additionally, this product received the "21st JPCA Award (Award) Encouragement Prize," being highly regarded for its technical uniqueness and future potential. Furthermore, the RF Division and Solution Division introduced the latest solutions under the theme "Creating the Future of Manufacturing DX with RFID." We will continue to strive to provide products and services that contribute to solving your challenges. We appreciate your continued support.

• Circuit Board Inspection Equipment

Thank you very much to everyone who visited the Takaya Corporation booth at the "1st [Kansai] Nepcon Japan - Electronics Development and Manufacturing Expo" held at Intex Osaka from May 14 (Wednesday) to May 16 (Friday), 2025. On that day, we introduced the latest inspection solutions, including the new model of our flying probe tester, APT-2600FD-A, as well as the camera module imaging tester DX3241 from our group company, Estakaya Electronics Industry Co., Ltd. We sincerely appreciate the interest shown by many attendees and the valuable feedback and questions we received. If you would like more detailed materials or have any inquiries regarding the products and technologies we introduced, please feel free to contact us. We will continue to strive to provide products and services that contribute to your development and manufacturing processes. We look forward to your continued support of Takaya Corporation.

• Circuit Board Inspection Equipment

Takaya Corporation exhibited at the "39th Internepcon Japan Electronics Manufacturing and Packaging Exhibition" held at Tokyo Big Sight from January 22 (Wednesday) to January 24 (Friday), 2025. Exhibited Products Industrial Equipment Division - Flying Probe Tester - New model "APT-2600FD-A" *First exhibition in Japan RF Division / Solutions Division - RFID Products - RFID × IoT Platform - RFID Continuous Monitoring Middleware - RFID Outgoing Management System - RFID Inbound/Outbound Plugin Package Thank you very much to all the customers who visited our booth. If you have any questions regarding the exhibited products, please feel free to contact us.

• Circuit Board Inspection Equipment

Takaya Corporation will exhibit a corporate booth at the 39th Spring Conference of the Japan Institute of Electronics Packaging, which will be held from March 11 (Tuesday) to March 13 (Thursday), 2025, at the Bunkyo Campus of Takushoku University. This conference is held annually under the management of the Japan Institute of Electronics Packaging, where the latest research and development results related to electronics packaging technology are presented and information is exchanged. Since 2023, it has been conducted in a hybrid format, allowing both in-person participation and online attendance, attracting around 700 participants, primarily from academia and industry related to electronics packaging technology. When you visit, please be sure to stop by Takaya's booth. (Registration and payment of participation fees are required for attendance.)

• Circuit Board Inspection Equipment

The 41st Comprehensive Exhibition of Distribution Information Systems "RetailTech JAPAN 2025" is an exhibition that introduces the latest "Distribution DX" technologies to solve the challenges faced by the retail industry—such as labor shortages, changes in consumer behavior, and responses to logistics law revisions. At Takaya's booth, we will showcase a cutting-edge anti-shoplifting solution utilizing self-sounding tags. You can experience firsthand how it contributes to reducing labor in stores through enhanced security and boosting sales. [Introduction of Exhibits (Partial)] Latest anti-shoplifting system "Wi-dimo" Automatically triggers an alarm when a tag exits the security area and stops immediately when it returns. It can be easily implemented in stores that cannot install security gates, achieving effective security measures. Security can be maintained without hindering the experience of the exhibited products. There are cases where sales have increased by 40% in stores that have implemented it. World's first! Self-sounding tag with looseness detection function "HAWK-GRIP FIVE" and "HAWK-GRIP FIVE COM" Detects unauthorized tag removal with unique patented technology not found in other companies. It has been highly evaluated for its strong security effectiveness, with a record of 360,000 units introduced over three years. We will also exhibit many other products. Please stop by the Takaya booth and experience the next generation of security.

• Other security and surveillance systems

What is RFID? RFID stands for Radio Frequency Identification. It is an automatic identification technology that uses wireless communication to identify and track objects or people. It transmits and receives electromagnetic waves or radio waves between RFID tags and RFID readers, allowing for non-contact reading and rewriting of information on the RFID tags. Takaya is a long-established manufacturer that has been producing RFID readers and writers for over 25 years. We not only provide highly reliable products but also have a support system that can respond quickly. Our comprehensive product documentation and rental demo equipment are highly regarded by many customers as attentive services unique to domestic manufacturers. Additionally, RFID technology is actively used in various fields such as facility access management, factory process management, and warehouse shipping and receiving inspections. We offer total proposals for optimal utilization to companies looking to leverage RFID technology for digitalization and business improvement. If you have clearly defined business challenges or feel there are issues with your existing operations, please do not hesitate to contact Takaya.

• RFID/IC tags

In recent years, RFID technology has rapidly spread across various fields, including logistics management and inventory management. Many companies are considering transitioning to RFID in response to demands for efficiency and accuracy improvements that traditional barcode systems cannot meet. However, the introduction of RFID requires dedicated label printers and software, and the initial costs and complexity of operation have posed barriers to adoption. To address these challenges and promote RFID adoption among more companies, Takaya has begun offering "RFID encoding software" free of charge. This software allows for easy import of barcode data and CSV files, enabling intuitive operation for writing data (encoding) to RF tags. As a result, it significantly lowers the barriers to RFID adoption for companies looking to try RFID for the first time or those wanting to quickly advance their Proof of Concept (PoC).

• RFID/IC tags

What is UHF band RFID? UHF band RFID is a wireless communication technology that uses a frequency range of 860 to 960 MHz. This technology employs radio wave methods and is characterized by a longer communication distance compared to the electromagnetic induction method used in HF band. The communication distance can range from a few centimeters to several meters, allowing for the simultaneous reading of multiple tags. As a result, it is widely used in situations where efficient reading over a wide area is required, such as in logistics and inventory management. The communication speed is also fast, enabling the rapid processing of large amounts of data, which has led to its increasing application in the apparel and manufacturing industries. However, there are challenges, such as susceptibility to the effects of metal and moisture, which will also be discussed.

• RFID/IC tags

The HF band is an abbreviation for "High Frequency" and utilizes a frequency of 13.56 MHz. The HF band has a short communication distance and is used in various fields due to its stable communication performance and high security. HF band RFID is a short-range wireless communication technology that uses the 13.56 MHz frequency band. This technology employs electromagnetic induction and is less affected by moisture and metal compared to UHF band radio waves. Therefore, although the communication distance is relatively short, ranging from about 5 to 70 cm, it is widely used in situations where stable communication performance is required. Despite the short communication distance, it allows for high-speed data transfer and is suitable for applications where security and individual authentication are important. Common examples include personal authentication with transportation IC cards and basic resident registration cards, as well as specimen management in healthcare and surgical instrument management. These technologies demonstrate their convenience in everyday life and industrial fields. Furthermore, NFC (Near Field Communication), which is incorporated into smartphones, is also a type of HF band technology. NFC is widely used as an important technology supporting modern digital life, such as cashless payments and data sharing.

• RFID/IC tags

The APT-2400F is a next-generation flying probe tester that boasts industry-leading probing accuracy capable of inspecting high-density mounted circuit boards. With its unique control mechanisms and sensing technology, it achieves highly reliable electrical testing in all environments. We accept evaluation tests at our demonstration rooms in Okayama headquarters and Tokyo branch, where you can bring in your circuit boards. We can conduct a series of tests including the creation of inspection programs, testing using actual boards, and summarizing evaluation results. *For more details, please feel free to contact us.

• Other measurement, recording and measuring instruments

The APT-2400F-SL is a large model that maintains the basic performance of the APT-2400F while expanding the compatible board size to W635×D610mm. Furthermore, by adding an optional split inspection function, it is capable of inspecting long boards up to W985×D610mm. It can accommodate component heights of up to 60mm on the top and 120mm on the bottom, and can handle board weights of up to 15kg, making it suitable for inspecting large and heavy boards such as those used in automotive, aerospace, medical devices, power supply boards, and probe cards. We accept evaluation tests at our demonstration rooms in Okayama headquarters and Tokyo branch, where you can bring in your boards. A complete testing process is possible, including the creation of inspection programs, testing with actual boards, and summarizing evaluation results. *For more details, please feel free to contact us.

• Other measurement, recording and measuring instruments

The APT-2600FD is a next-generation dual-side flying probe tester that can perform combination testing with up to 6 probes using both upper and lower flying probes simultaneously. It improves test coverage while reducing the risk of product damage due to board flipping operations, significantly shortening inspection time. Equipped with a high-performance measurement system and a variety of features, it contributes to quality improvement from prototyping to mass production. We accept evaluation tests at our demonstration rooms in Okayama headquarters and Tokyo branch, where you can bring in your boards. A complete testing process is possible, including the creation of inspection programs, testing using actual boards, and summarizing evaluation results. *For more details, please feel free to contact us.*

• Other measurement, recording and measuring instruments

The APT-2600FD-SL is a large model that maintains the basic performance of the APT-2600FD while expanding the compatible board size to W635×D610mm. Furthermore, by adding an optional split inspection function, it can inspect long boards up to W985×D610mm. It can accommodate components with a height of 60mm and board weights of up to 15kg, making it suitable for inspecting large and heavy boards such as those used in automotive, aerospace, medical devices, power supply boards, and probe cards. We accept evaluation tests at our demonstration rooms in Okayama headquarters and Tokyo branch, where you can bring in your boards. A complete testing process is possible, including the creation of inspection programs, testing with actual boards, and summarizing evaluation results. On July 31, 2025, at the Keidanren Kaikan in Otemachi, Chiyoda-ku, Tokyo, this product received the "Nikkankogyo Shimbun 110th Anniversary Award" at the "55th Mechanical Industry Design Award IDEA" ceremony. The judging committee praised the design philosophy that balances inspection efficiency and reliability, providing an opportunity for our technological and product design capabilities to be widely recognized. *For more details, please feel free to contact us.*

• Other measurement, recording and measuring instruments

【Implementation Results for EMS Companies】 - By conducting electrical inspections from the prototype stage of the circuit board, we achieve quality assurance before mass production. - Early optimization of circuit board design and component selection contributes to the reduction of defects in later processes. 【Challenges Faced by Customers】 Cost of Recreating Jigs: With jig-based testers, it is necessary to recreate dedicated jigs every time there is a prototype or design change. Each design change requires modifications to the jigs, significantly increasing costs and time. Insufficient Response to Design Changes: Conventional inspection methods make it difficult to respond flexibly to design changes. There were instances where long lead times made rapid verification during the prototype stage challenging.

• Circuit Board Inspection Equipment

High-precision inspections compliant with IEC60384-1 are possible. The characteristics of electronic components such as fixed capacitors are guaranteed according to international standards, achieving improved quality for high-density boards. We flexibly respond to design changes and prototypes, providing cost-effective inspection solutions. 【Implementation Achievements】 - Conducted inspections of high-density mounted boards, achieving quality assurance tailored to precision boards. - Enabled inspections compliant with the IEC60384-1 standard (performance standards for fixed capacitors), ensuring product quality in line with international standards. 【Customer Challenges】 Narrow Pitch Between Components: In high-density boards, the space between components is extremely narrow, making physical contact difficult with traditional jig-based inspections. There is a potential decrease in inspection accuracy, especially in narrow pitch areas below 0.2mm and with high pin count components. Need for Compliance with Standards: As compliance with international standards represented by IEC60384-1 is required, a system that reliably implements inspection items based on these standards is necessary. It is particularly important to measure the characteristics of fixed capacitors and special components accurately and quickly. Limits of Inspection Coverage: In designs where the number of test points has decreased, there is a risk of reduced inspection coverage due to insufficient physical access.

• Circuit Board Inspection Equipment

In large-scale board inspections for communication infrastructure and servers, jig-less inspection is particularly effective. Even with large board sizes, it can be handled efficiently, and this inspection method combines flexibility and precision, contributing to quality improvement and cost reduction. This significantly contributes to ensuring reliability in the fields of communication infrastructure and servers. 【Implementation Results】 - Established inspection technology tailored to the quality requirements specific to large boards. - Guaranteed the reliability of high-precision boards used in communication infrastructure devices and server products. 【Challenges Faced by Customers】 Handling of large boards: With jig-based testers, designing and manufacturing jigs for large boards is difficult. Due to weight and handling constraints, setup times are prolonged. Response to design changes: Large boards have many test points, and the cost of modifying jigs increases during design changes. The flexibility of the inspection process is low, making it unsuitable for low-volume, high-variety production. Cost and storage space: Jigs for large boards have high manufacturing costs and take up storage space. When operating multiple product lines, managing jigs becomes complicated.

• Circuit Board Inspection Equipment

By combining visual inspection, non-contact scanning, and physical probing, we meet the stringent reliability standards in the medical device field, achieving both quality improvement and cost reduction. 【Implementation Achievements】 - Achieved full inspection in inline testing, ensuring product quality. - Enhanced defect detection capabilities for large substrates and complex design boards through collaboration with boundary scan technology. 【Challenges Faced by Customers】 Limitations of APT alone: Flying probe testers excel in electrical characteristic testing, but physical access for probing is difficult for components with hidden pin connections, such as BGA and QFP. In high-density substrates, there are areas that cannot be fully covered by probing alone. Constraints of AOI: Cannot detect defects (such as solder bridges or connection failures) located beneath BGA or large components. Internal connections and micro shorts in multilayer substrates cannot be detected. In large substrates, areas beyond the field of view occur, making it difficult to efficiently inspect the entire area. Challenges with large substrates and complex designs: In large substrates, inspection time tends to increase for both AOI and APT, leading to decreased productivity. Full inspection of high-density mounted substrates requires an efficient inspection system that combines physical probing and non-contact inspection.

• Circuit Board Inspection Equipment

By combining electrical testing using APT with AOI, which is difficult for discrete components and hand-inserted parts, we achieve the high quality standards required for power generation and power system boards, providing an efficient inspection system. 【Implementation Results】 - Conducted implementation verification focused on discrete components, achieving quality assurance for power system boards that require high reliability. - Realized 100% inspection on boards including power lines and hand-inserted components. 【Challenges Faced by Customers】 Limitations of AOI Inspection: While AOI (Automated Optical Inspection) excels at inspecting surface-mounted components, it has limitations in the following areas: - Difficulty in inspecting hand-inserted components: It cannot sufficiently verify the quality of the implementation of power lines and large discrete components. - Insufficient confirmation of component position and polarity: AOI cannot accurately confirm electrical characteristics, leading to the risk of missing incorrect insertions or polarity issues. Risks During Power Supply: Defective components or miswiring in power lines can lead to damage to the board or destruction of components. Particularly, if the quality assurance for discrete components is inadequate, the risk of overheating or short circuits increases. Generation of Waste Boards: If the board is damaged during power-on testing, the disposal of defective boards occurs, leading to increased costs.

• Circuit Board Inspection Equipment

In the mass production process of circuit boards for consumer products, conducting constant inspections of chip components and verifying the mounter program before assembly helps prevent lot outs and defective products from being released, achieving both efficiency in the manufacturing process and improved quality. 【Implementation Results】 - In the process of switching models for mass-produced high-density assembly boards, program verification of the mounter and constant inspections of chip components were conducted. - Efficient manufacturing processes were realized through short-duration and high-precision inspections. 【Challenges Faced by Customers】 Component Set Mistakes: There is a risk of component set mistakes during the assembly process or the installation of non-specified components. Particularly in mass production, if mistakes are discovered late, it can lead to a large number of lot outs. Program Mistakes: Due to errors in the mounter's program settings, there is a possibility that incorrect components are installed on the circuit board. If a setting mistake is discovered in a later process, the costs for rework or disposal increase. Limitations of Visual Inspection: Manual and visual checks depend on the skill and fatigue of the operator, making it easy for inspection omissions and false detections to occur.

• Circuit Board Inspection Equipment

In the analysis of defective automotive circuit boards, utilizing a flying probe tester enables the rapid identification of defective areas and improves repairability. By shortening analysis time and reducing waste circuit boards, we aim to achieve both quality enhancement and cost efficiency, contributing to increased reliability in the automotive industry. 【Implementation Results】 - Analyzed defective areas of circuit boards determined to be faulty through functional testing or returned from the market due to failures. - Contributed to product improvement and defect reduction through quick identification of causes. 【Challenges Faced by Customers】 Need for Advanced Knowledge: Defect analysis requires knowledge of circuit design, implementation technology, and operational characteristics. In complex automotive circuit boards, the causes can be diverse, making analysis challenging. Prolonged Analysis Time: Manual analysis and visual confirmation can be time-consuming and may fail to identify defective areas. This is particularly difficult in multilayer boards where detecting internal connection failures or fine short circuits is challenging. Generation of Waste Circuit Boards: If defective areas cannot be identified, the entire circuit board may have to be discarded, leading to increased costs.

• Circuit Board Inspection Equipment

By utilizing color sensors for automated inspection, we overcome the limitations of visual inspection and achieve quality stabilization and efficiency. Automation reduces the burden on operators and establishes consistent inspection standards, balancing improved product reliability with cost reduction. 【Implementation Achievements】 - Transition from visual inspection to automated inspection. - Achieved quality stabilization through precise automated inspection using color sensors. 【Challenges Faced by Customers】 Operator Burden: Visual inspection relies on the skills and experience of operators, leading to issues such as fatigue and decreased concentration during long hours of work. As the burden on operators increases, the risk of decreased inspection accuracy rises. Variability in Judgment Criteria: Visual inspection involves subjective judgments by individuals, resulting in variability in quality standards. Inconsistent judgments can lead to the outflow of defective products and excessive inspection. Difficulty in Confirming LED Characteristics: Determining fine characteristics such as the color and brightness of LEDs is challenging through visual inspection. Inspections based on accurate numerical standards are required.

• Circuit Board Inspection Equipment

In the aerospace and defense sectors, where high-quality standards are required, the use of flying probe testers streamlines the inspection of low-volume production boards. The flexible inspection flow, which does not require fixtures, enables quick turnaround times and ensures traceability, achieving both quality improvement and cost reduction. 【Implementation Results】 - Conducted full inspection of low-volume production boards, achieving quality assurance for products that require high reliability. - Responded to the stringent demands specific to the aerospace and defense sectors with a high-precision inspection flow. 【Challenges Faced by Customers】 Burden of Fixture Creation: Fixture-based testers require dedicated fixtures for each board, leading to excessive costs for low-volume production. The design and manufacturing of fixtures take time, making it difficult to respond to short lead times. Difficulty in Defect Detection: There is a risk of missing fine defects (hidden shorts, internal wiring issues) that are difficult to detect with only AOI or functional testing. Particularly in multilayer boards, visual inspections and standard power-on tests are insufficient for quality assurance. Traceability Requirements: In aerospace and defense products, it is necessary to record measurement results and inspection data in detail to ensure future traceability.

• Circuit Board Inspection Equipment

I would like to express my deep gratitude for the support and kindness you have shown us thus far. We sincerely hope for your continued patronage in the future. As part of our anniversary celebration, we have produced a commemorative magazine and a history video, so please feel free to take a look.

• Circuit Board Inspection Equipment

We cordially invite you to visit our booth at the event. 【Exhibited Products (Partial)】 ○ Gate Antenna TR3X-G004 If a book is taken out without processing the loan, the gate will sound an alarm and provide a voice notification. It can count the number of people entering and exiting during different time periods. This stylish acrylic type has a transparent design that matches the atmosphere of the library and the entrance's aesthetics. ○ Handheld Terminal for Inventory Checks By inserting an antenna at regular intervals among the books on the shelf, it reads the title information of books with IC tags attached. The handheld device can store up to 20,000 records. It connects with the library system via Bluetooth, allowing for data transmission of book information from the shelves for inventory management. ○ Reader-Writer & Antenna for Checkout and Return Operations at the Counter When a book with an IC tag is placed on the tabletop antenna, it instantly reads the IC tag information and displays the book's registration details on the screen. This assists in speedy checkout processing. We will also showcase many other products. For more detailed information, please refer to the related catalog materials.

• IC tag reader/writer

Okayama Prefecture is known as a "manufacturing prefecture," with many companies possessing excellent technologies and products, and the manufacturing sector accounts for a significantly higher percentage of the prefecture's gross domestic product compared to the national average. The "Okayama Technology Exhibition (OTEX)" is one of the largest exhibitions and business meetings for machinery manufacturing companies in the Chugoku and Shikoku regions, and it has been held since 2016 to widely promote "Manufacturing Prefecture Okayama." We look forward to your visit, both at the physical exhibition and online.

• Circuit Board Inspection Equipment

Takaya Corporation's RF Division will exhibit at the "Bingo Digital Lab EXPO" to be held on Thursday, October 3, 2024, at the Fukuyama Industrial Exchange Hall in Hiroshima Prefecture. ---------- Start DX right now! IT tools that solve challenges are coming to Fukuyama! The "Bingo Digital Lab EXPO" is an exhibition and business meeting aimed at promoting the collection of information and implementation of IT solutions to address challenges such as improving operational efficiency and reforming work styles. It will be a venue where participants can experience the necessity of utilizing digital technology as a step towards a highly digitalized society to solve business and social issues. ---------- On the day of the event, we plan to showcase our RFID × IoT data service, the "RFID Work Performance Collection System." Our RFID Work Performance Collection System collects work performance data simply by placing work instructions with IC tags. Autonomous readers are installed at each process to read the IC tags. The reader sends information to the cloud when the tag is placed as "IN" and when it is taken as "OUT." The accumulated work performance data can be aggregated and analyzed using BI tools. We look forward to your visit.

• IC tag reader/writer

This exhibition, themed "AUTO-ID for DX: Automation Solutions Shaping the Future," will showcase advanced technologies in automatic recognition, as well as a "Image Recognition x AI Zone" where you can see technologies that have been attracting attention in recent years. Our company will present the latest solutions aimed at solving customer challenges under the theme "Creating the Future of Manufacturing DX with RFID." We sincerely look forward to your visit. Exhibition Contents: ◎ RFID x IoT Data Service: "Visualizing Worker Performance and Location with RFID" ◎ Continuous Monitoring of Kanban Cards, Actual Product Labels, Wafer Transport Containers, etc.: "No Inventory Needed! Real-Time Continuous Monitoring" ◎ Streamlining Inbound and Outbound Operations through Bulk Inspection: "Just Pass Through! Bulk Inbound and Outbound Inspection" ◎ Easy Setup and Work Performance Collection without a PC: "Detakore Terminal" ◎ Record Outgoing Management with Just a Touch: "Easy Outgoing Management with RFID" ◎ Solutions with Embedded Modules: "Simply Manage Both Keys and Work Progress with RFID" ◎ Ideal for Embedding! NFC-Compatible Compact RFID Reader/Writer

• IC tag reader/writer

Takaya Corporation will exhibit a corporate booth at the "MES024 34th Microelectronics Symposium," which will be held for three days from September 11 (Wednesday) to September 13 (Friday), 2024, at the Daido University Takiharu Campus in Minami Ward, Nagoya City. If you visit the symposium, please be sure to stop by Takaya's booth. Organizing Office (General Incorporated Association) Electronics Packaging Society 3-12-2 Nishiogikita, Suginami-ku, Tokyo 167-0042 TEL: 03-5310-2010 For details and the latest information, please visit the MES2024 website.

• Circuit Board Inspection Equipment

Takaya Corporation (Headquarters: Ibara-cho, Ibara City, Okayama Prefecture; President: Ryuji Okamoto) has received the 20th "JPCA Award" for its "Hybrid Inspection System Combining JTAG Testing and Flying Probe Testing." The awarded "Hybrid Inspection System Combining JTAG Testing and Flying Probe Testing" integrates the flying probe tester with JTAG boundary scan testing, allowing for the mutual complementarity of each inspection method to maximize test coverage for high-density mounted boards and enable more accurate fault diagnosis. A panel introducing the award will be displayed at the "JPCA Show 2024 (Total Solution Exhibition for Electronic Devices 2024)" held at Tokyo Big Sight from June 12 (Wednesday) to June 14 (Friday). Our company will also have an exhibition booth at the event, showcasing a live flying probe tester. We invite you to come and see it.

• Circuit Board Inspection Equipment

This exhibition, themed "Connected Factories," will showcase a wide range of products and technologies that meet users' challenges and expectations, from appropriate tools based on scale and equipment to solutions for optimization. Our company will present the latest solutions for solving customer challenges under the theme "Creating the Future of Manufacturing DX with RFID." We look forward to your visit. 【Exhibition Content】 ◎ RFID × IoT Data Service: "Visualizing Worker Performance and Location with RFID" ◎ Continuous Monitoring of Kanban Cards, Actual Product Labels, Wafer Transport Containers, etc.: "No Inventory Needed! Real-Time Continuous Monitoring" ◎ Streamlining Inbound and Outbound Operations through Bulk Inspection: "Just Pass Through! Bulk Inbound and Outbound Inspection" ◎ Record Outgoing Management with Just a Touch: "Easy Outgoing Management with RFID" ◎ Solutions with Embedded Modules: "Simply Manage Both Keys and Work Progress with RFID" ◎ LED, Heat-Resistant, Metal-Compatible, Wearable: "High-Function Tags for Different Scenes" ◎ Transitioning from Barcode to RFID Operation: "Easily Replace Barcode with IC Tags" For more details, please refer to the informational materials in the related catalog below.

• IC tag reader/writer

Thank you to everyone who visited the Takaya Corporation booth at the "Electronic Equipment Total Solution Exhibition 2024 (JPCA Show 2024) / JISSO PROTEC 2024" held at Tokyo Big Sight from June 12 to June 14, 2024. We have made information about the products we exhibited available. If you have any questions or inquiries regarding the content, please feel free to contact us. Additionally, we received the 20th "JPCA Award" for our "Hybrid Inspection System combining JTAG testing and flying probe testers," and an introduction panel regarding this award was displayed at the venue.

• Circuit Board Inspection Equipment

The 38th Electronics Packaging Society Spring Conference was held from March 13 (Wednesday) to 15 (Friday), 2024, at the Noda Campus of Tokyo University of Science. At this conference, Mr. Yanagida, the Technical Department Manager of Takaya Corporation's Industrial Equipment Division, gave a presentation on "The Latest Trends in Hybrid Testing Systems Combining JTAG Testing and Flying Probe Testers." The presentation materials from that session have been made available, so please take a look at the related catalog pages below. -------- Content -------- To ensure reliable assembly guarantees for printed circuit boards, electrical testing is essential. However, a single testing method alone does not provide sufficient test coverage. To address this issue, we introduce a hybrid testing system that integrates flying probe testers with JTAG boundary scan testing. By complementing each testing method, we can maximize the test coverage for high-density printed circuit boards, enabling more accurate fault diagnosis.

• Circuit Board Inspection Equipment

Vis-a-Vis Co., Ltd. (Headquarters: Kita Ward, Okayama City) conducted a survey targeting graduate students, university students, junior college students, and vocational school students expected to graduate in spring 2025 (March 2025) regarding "three companies they hope to work for in Okayama and their reasons for voting." The results have been published. As a result, Takaya Co., Ltd. ranked 20th overall and 10th in the male ranking! Compared to last year, we have significantly improved our ranking. Thank you to everyone who evaluated Takaya. For more details, please visit the news release on the Vis-a-Vis website. https://www.vis-a-vis.co.jp/news/index.cgi?c=zoom&id=6

• Circuit Board Inspection Equipment

*What is RFID? RFID (Radio Frequency Identification) is a system that transmits and receives electromagnetic waves or radio waves between RF tags and RFID readers (reading devices), allowing for non-contact reading and rewriting of information on RF tags. Common applications of RFID include transportation IC cards, electronic money, and its adoption is progressing in various industries such as manufacturing, distribution, retail, and healthcare. RFID can read multiple RF tags simultaneously as long as they are within the range of radio waves. Therefore, it is gaining attention as a technology that can replace barcodes and QR codes, which require individual scanning. *Features of RFID RFID has excellent features that barcodes do not possess, such as non-contact bulk reading and the ability to read tags that are hidden. On the downside, it can be affected by metals and moisture, and it may read items that do not need to be scanned. Although the cost of RFID tags has been decreasing in recent years, there is still a significant cost difference compared to barcodes. Therefore, it is important to understand the characteristics of each technology and choose the one that fits the challenges and operations you wish to address.

• IC tag reader/writer

Exhibit Overview 1. UHF Band Smart Shelf Antenna + Wi-dimo A system with RFID functionality that features four functions: product promotion, theft prevention, inventory management, and marketing, aimed at reducing the need for staff in stores. 2. Wi-dimo Theft Prevention Solution No installation of theft prevention gates is required; with just a power source and a dedicated self-sounding tag, you can immediately prevent the removal of equipment and products. Additionally, the alarm will stop when the item is returned to the designated area, so there is no need to go and stop it. You can experience a demonstration at the booth. 3. Latest Self-Sounding Tag We have developed a new self-sounding tag tailored to user feedback, specialized for different applications and purposes. You can see a demonstration at the booth. 4. Rocket Co., Ltd. Digital Gate

• IC tag reader/writer

Four Functions to Support Store Operations Security Function Notifies when multiple items are quickly removed from the shelf. Inventory Management Notifies when all items are removed from the shelf or when the quantity falls below a certain set number. Sales Promotion Promotes sales by displaying promotional images on the screen when a product is picked up. Marketing Counts and detects products when customers return them to the shelf, quantifying the popularity of the items.

• IC tag

In the October 2023 issue of the European electronics industry magazine "EPP," an article introducing Takaya's flying probe testers has been published. Takaya Corporation and its European distributor, Cystec Europe, have maintained a long-standing partnership with Siemens in Germany. At Siemens' global flagship factory "SIEMENS Karlsruhe," 12 Takaya flying probe testers are currently in operation, ensuring the reliability of assembled circuit boards. The APT-1600FD-A achieves fully unmanned inspection 24 hours a day, 5 days a week through simultaneous inspection of both sides, automatic setup of inspection programs using new software, and automatic transport of circuit boards using an Autonomous Mobile Robot (AMR). Additionally, it supports the latest interface standards such as OPC UA, enabling integration with MES systems, as well as establishing an environment for monitoring operational rates and automatically switching inspection programs based on defect statistics. Please check the related links and download page for more information.

• Circuit Board Inspection Equipment

You can view information about the products exhibited on that day here. 〇 Industrial Equipment Division - Flying Probe Tester APT-1600FD-A (Assembly Board Inspection Device) Unmanned continuous inspection linked with front and rear devices OPC-UA (OPC Unified Architecture) Linked with MES (Manufacturing Execution System) Real-time information collection and management of operational status 〇 RF Division / Solutions Division - RFID Outgoing Management System - RFID UHF Band Continuous Monitoring System - Work performance collection using RFID / Semiconductor IC Tag Reading - RFID × IoT Data Device "RFID Performance Collection System" - Easy replacement from barcode HID reader and key input tool

• Circuit Board Inspection Equipment

OPC UA (OPC Unified Architecture) is an open international standard developed for safe and reliable data exchange in industries such as industrial automation. It was announced by the OPC Foundation in 2008 and later standardized as IEC62541. It allows for secure and highly reliable data exchange across different types of devices, operating systems, and manufacturers, making it recommended as the standard communication for Industrie 4.0 and increasingly adopted worldwide. Additionally, it is aligned with the international standard for PLCs, IEC61131-3, which provides the advantage of reliably exchanging information from the manufacturing site with higher-level monitoring control systems and Manufacturing Execution Systems (MES). In response to this trend, Takaya has prepared an option to equip the APT series of flying probe testers with an OPC UA server. We are working to promote the spread of industrial IoT standards that bridge FA equipment and IT.

• Circuit Board Inspection Equipment

We will be exhibiting new products and technologies at the 38th NePCON Japan! 〇Industrial Equipment Division APT-1600FD Dual-Side Flying Probe Tester A flagship model that allows simultaneous inspection of both sides by placing probe heads on the top and bottom of the board. Using OPC-UA (OPC Unified Architecture), our unique software links with your MES (Manufacturing Execution System) to collect and manage operational information in real-time (first-time exhibit). 〇RF Division RFID × IoT Data Service "RFID Work Performance Collection System" Data from IC tags can be sent to the cloud via MQTT just by placing them, enabling data collection. The collected data is visualized through a dashboard function, achieving "visualization of work performance." Since the reader-writer is autonomous, there is no need for a control PC or software development for both HF and UHF bands. Record management of items taken out with just a touch "Item Management System" Utilizing IC tags to reliably record the history of items taken out and returned, preventing omissions and errors in ledger entries, and supporting early detection of forgotten returns or losses. Efficient inventory management is possible through bulk reading with RFID handheld devices. Many more exhibits are planned.

• Circuit Board Inspection Equipment