See Mounting Machine's detailed category ranking
Maintain a high humidity environment! Prevent evaporation of the sample!
Introducing our substrate specifications, including MCL-E-67 and R-1766!
This is a series of mortar concrete spraying machines that are easy to handle and have few breakdowns.
LPKF's UV laser circuit board processing machine that accommodates the most diverse materials.
A device for semi-automatically applying dicing tape to silicon wafers. It is a semi-auto type compatible with 12-inch wafers, providing supply of wafer frames and frame mounting.
A flexible machine suitable for small lot, diverse production has been renewed. An expandable SMT placement machine (surface mount, board mounting, mounter).
By converting conventional vacuum tables, such as porous ones, into aluminum honeycomb panels, significant cost reductions can be achieved!
Excellent environmental performance, outstanding performance! Strongly supports tough job sites.
The ISM series automated warehouse promotes the automation of parts management through collaboration with autonomous transport vehicles. It solves issues in parts management such as inventory, space-saving, and labor reduction!
The definitive version of the pre-cut machine for electronic component lead wires!
Permanent solution for screw hole repair! We will restore crushed screw holes, screw threads, bolt holes, and damaged screw threads to their original size.
Solve it with the Unitemp reflow device! Reducing gas works by reacting with the oxygen on the metal surface to restore it to its original state without an oxide film!
The lineup includes the digital temperature display type "DMSD series" and the simple temperature control type "MSD series"!
Storage shelf for metal masks that can be connected one step at a time.
We will finish to your desired surface roughness using two methods: wrapping processing and polishing processing (mirror polishing method)!
Auto-lamination without bubbles under preset pasting conditions.
Starting with research and development, a wide range of equipment selection is possible according to the purpose, up to semi-production applications.
Nitrogen does not have a reducing effect like flux! There is a risk of an unbalanced state occurring.
Achieve increased exhaust power and reduced wave impact! The preheating four zones allow for individual temperature control!
We deliver the greatest economic value through technology that realizes a positive cycle between the economy and the environment.
Sharp and powerful blades! The industry-leading specialized hammer knife has been newly upgraded for more power!
Heating settings up to 450℃, compatible with formic acid reduction processes, standard equipped with substrate cooling function.
■Manual operation makes it easy and safe ■Hydraulic press allows for easy handling of large loads ■Load gauge is on the front with a digital display for good visibility
The selective soldering machine has undergone a model change! Managing the device, which has been cumbersome until now, can be done easily.
A cutting-edge machine that performs various functions in one unit! The transport and jet flow motors are inverter-controlled, allowing for diverse adjustments.
A custom equipment manufacturer that can consult from the platform. We propose the best equipment for process improvement and automation challenges!
Over 50,000 rework achievements for BGA with a pitch of 0.35 to 1.27mm! Even for just one piece, you can trust us with circuit boards that have underfill applied!
Introducing customizable press devices for various applications such as lamination, bonding, and impregnation!
N2 reflow device N2 reflow - SMT REFLOW
[Parts Repair/Repair/Reimplementation] Stable and safe rework operations, standard solder and lead-free solder, compatible with large and small circuit boards, large and small devices!
High performance, high safety, excellent mobility, low running costs, AG-150II.
The temperature control status is visually indicated by the blinking of a neon lamp! Specifications for both 2-wire and 3-wire types are available.
Professional multilayer board creation in-house and in the lab.
Only the necessary features! Simple rack for metal masks.
The birth of a high-precision, high-performance gantry loader! Integration with a pallet changer is also possible.
Focusing on the 'optimal timing'! Also able to handle back fillets for through holes without any issues.
No teaching required! You can create a "soldering program" on your PC screen.
Zero waste solder + CO2 reduction for environmental measures!
Adopting solid UV lasers as the light source! Compatible with everything from compact, low-cost LLO devices to large equipment for G6 panels.
Soldering with a robot! It can accurately position lead wires and perform soldering.
【Monthly Web Seminars Now Held!】Automating the processes from PCB supply to PCB cutting, palletizing onto output trays, and PCB discharge!
All components are custom-made, allowing for flexible customization. We offer one-stop support, including software compatibility, at attractive prices.
The substrate is set on a porous PE plate! There is no need to flip the substrate even for double-sided inspection.
Equipped with laser-type jet wave height detection function! Introducing the production equipment of VEMS Corporation.
The taping work is easy and quick with the trigger switch.
Compact lead-free compatible machine. Number of heating zones: 6. Device length: 1,590mm.
Cost reduction and quality improvement with pre-cut tape compatibility!
Prevent loss due to parts falling off during tape component storage! Can be easily reattached without hassle! Compatible with all carrier tape widths with just one type.
Leave the substrate cutting device to TME.
BGA rework has become this easy! This rework device can handle BGA, CSP, and microchips all with one machine.
Top and bottom heating, supports heating up to 400℃, tabletop reflow furnace (heating furnace).
We provide various functions such as product transport, buffering, accumulation, and routing. We also propose combinations with conveyors!
We handle the installation and manufacturing of gas supply equipment, as well as special material gas piping work.
Prevents disconnection in the movable parts of clean room machinery, easy to open and store, and seals tightly when closed.
High-efficiency spray flux applicators! We will also introduce the specifications of each device.
The unloader boasting the largest annual unloading volume in Japan that supports international bulk strategic ports.
Solving issues such as storage and supply stability, wettability, and heat resistance! Next-generation environmental compatibility!
Usable in all factories. Due to its high magnetic strength, it adsorbs and removes fine iron powder and metal fragments (magnetic materials).
Prevent foreign matter contamination in food! Remove fine iron powder with high magnetic force.
Solving the challenges faced in the component insertion process! A component insertion machine with extensive implementation experience across multiple industries such as white goods, PCs, power supplies, and automotive.
Customized production tailored to your cylindrical work! Made-to-order equipment.
A station-type function built into a single soldering iron! A smart soldering iron with a digital display.
By using a dedicated heater to burn the ceramic sleeve, we incinerate the adhered dross and perform cleaning.
A company that designs and manufactures industrial weighing machines to meet the ever-changing needs of the world.
It is possible to achieve further miniaturization with two-fluid technology.
A solder pot made of cast iron with surface treatment, improving erosion resistance.
The "Demo Now Available" partial soldering device, also known as point dip or selective flow, solves the problems of flow soldering!
It solves the issues of conventional soldering with soldering irons and point jet soldering!
Space-saving through multi-stage structure! High-capacity compact tilt tray sorter.
Compatible with ultra-small components of size 0201. A substrate suitable for advanced packaging such as sub-modules and SiP, surface mount machines, and mounters!
You can use the equipment you currently have as is! You can reduce capital investment for automation.
Laser marker for substrates. Equipped with camera imaging and image processing software as standard. It is capable of correcting print positions, confirming the direction of workpiece loading, and saving code readings, among other functions.
By automating grease and oil lubrication, maintenance costs are reduced. It always maintains the appropriate amount of grease and oil, extending the lifespan of machinery!
Automating and streamlining manual grease oil lubrication can reduce maintenance costs, enhance safety measures, and decrease labor hours!
The application of water-based moisture-proof materials can significantly reduce the drying time while ensuring a bubble-free film formation.
A revolutionary spray system that allows for the thin film spraying of water-based materials and high to medium viscosity solvent-based adhesives without clogging or stringing, enabling selective partial application.
This is a device for temporarily attaching cover tape to a backing card after membranes and various pads have been installed.
Positioning pins/stacking pins (small diameter pins) to fix the workpieces so that they do not shift! Material: SKH51, SUS material, carbide, etc.
【Parts Repair/Repair/Reimplementation】A network that leaps into the world! We will make new proposals with new technology.
Compact model of rework equipment/rework system. All-in-one type rework system for all SMT components with this one device!
Providing FUJI NXT modular chip shooter from Fuji Machine Manufacturing Co., Ltd. (a machine capable of surface mount technology, placement machine).
We will repair and extend the life of electronic devices whose manufacturer's warranty has expired, based on the experience and know-how cultivated over many years in power supply manufacturing and industrial computer manufacturing.
Achieving 10nm order alignment with a 6-axis control unit.
Compatible with 100V power supply! A compact model that is among the smallest in the industry, compatible with Φ4 inch and 100mm square!
Solve it with the Unitemp reflow device! Vacuum (decompression) is possible even when the chamber is at high temperature after reaching the melting point!
Solved with the Unitemp reflow device! Significant high-speed cooling! A cooling rate of nearly 3°C per second from solder melting to solidification!
Solve it with the Unitemp reflow device! Achieve rapid heating! No more worries about damage from unexpected temperatures!
Low-cost temperature controller with digital display and auto-tuning function!
The tip is finished with a Teflon coating! We also have suitable support tools for stable resin crimping.
Adopting a heating method using near-infrared! It allows for the observation of the reflow state while measuring oxygen concentration.
RoHS compliant lead-free solder compatible reflow oven
We are equipped with a wide range of machine tools, including general-purpose NC lathes, machining centers, and grinding machines.
Efficient storage with sliding dividers! You can easily take things out even while wearing gloves, as they slide out for easy access!