List of all products

Reduce the workload from handling heavy objects! Here are five case studies that solved customer challenges! We are also accepting free consultations and tests tailored to your work!

• Other conveying machines

Ideal for micro-machining! Achieves deburring of holes and double-sided machining in one pass, which was difficult with conventional tools!

• Other machine tools

Poor adhesion cannot be solved by paint alone. Multiple processes such as pretreatment, degreasing, and gas release are involved.

• others

Insufficient degreasing can trigger malfunctions. An explanation of the importance of the often-overlooked degreasing process.

• others

The cause of the dripping is the mismatch between paint viscosity and curing temperature. It explains the phenomenon where a 20-degree difference results in a threefold increase in occurrence rate.

• others

The cause of color unevenness is the variation in film thickness. By managing within plus or minus 30 microns, it is possible to reduce it by 90 percent.

• others

70 percent of foreign matter contamination is caused by the cleaning process. It is possible to reduce it by 99 percent through filter replacement and cleaning solution management.

• others

The cause of gloss unevenness is the difference in film thickness and drying speed. By managing the drying time within plus or minus 5 minutes, the improvement rate is 80 percent.

• others

The cause of rust reoccurrence is the thinness of the chemical treatment film. Ensuring a thickness of 8-12 microns allows for 5 years of corrosion resistance.

• others

Eighty percent of poor hardening is due to insufficient baking temperature. An explanation of the measured value that hardness decreases by 20 percent with a 10-degree difference.

• others

The cause of paint peeling is poor adhesion. By simultaneously optimizing degreasing and chemical treatment, the occurrence rate can be reduced by 99 percent.

• others

The cause of color unevenness is the variation in film thickness. Managing it within plus or minus 30 microns can reduce it by 90 percent.

• others

70 percent of foreign matter contamination is caused by the cleaning process. It is possible to reduce it by 99 percent through filter replacement and cleaning solution management.

• others

The cause of gloss unevenness is the difference in film thickness and drying speed. By managing the drying time within plus or minus 5 minutes, the improvement rate is 80 percent.

• others

Identify the poor adhesion caused by insufficient degreasing. Explanation of the important process.

• others

Insufficient degreasing leads to poor adhesion. Explaining the importance of often-overlooked processes.

• others

Identify adhesion failures caused by insufficient degreasing. Explain the importance of the often-overlooked degreasing process.

• others

The paint peeling that does not improve even after reviewing the baking temperature. I will explain the relationship with the often-overlooked previous processes.

• others

The degreasing process, which is often overlooked in pinhole prevention measures, will be explained in terms of how residual oil can lead to a decline in quality.

• others

Insufficient drying after cleaning may be the cause of pinholes. I will explain the defects caused by residual moisture.

• others

Blister defects may be caused by insufficient chemical treatment. I will explain the importance of adhesion and corrosion resistance.

• others

Even if there are no visible issues at the time of shipment, I will explain the causes of red rust appearing during storage or after delivery.

• others

Small holes in the coating may be caused by the surface of the material or the drying conditions.

• others

The blemishes and debris on the painted surface are caused not only by the painting booth but also by the processes before and after.

• others

Color variations and uneven coloring are influenced not only by the paint but also by film thickness and drying conditions.

• others

Before changing the paint, check the three pre-treatment items for peeling during assembly. We will organize the causes of poor adhesion from a field perspective.

• others

Even if the product is in good condition at the time of shipment, red rust may appear after two weeks. We will explain the management of the substrate at the edges, holes, and welds.

• others

Paint adhesion to the screw parts or contact points can lead to assembly defects or electrical conduction issues, even if it occurs in just one location.

• others

Clogging of bolt holes and drainage holes is an important issue that can lead to both assembly defects and the recurrence of rust.

• others

The cause of paint peeling in metal baked coatings may not be the paint itself. This explains the poor adhesion due to insufficient pretreatment.

• others

Pinholes that occur in metal baked coatings. This will clearly explain the relationship with internal gases and pre-treatment.

• others

Blisters that occur in metal baked coatings. This explains the corrosion that progresses within the paint film and the importance of pre-treatment.

• others

What causes poor adhesion in metal baked coatings? This explains the key points for improving quality by reviewing the pretreatment process.

• others

Why is thinner necessary for metal baking paint? I will explain the differences and roles in an easy-to-understand manner.

• others

How does a low amount of thinner affect the quality of the paint? This explains the typical defects and the importance of proper dilution.

• others

Parts that had no issues at the time of shipment are now blistering in the market. We will uncover the mystery of blisters that occur after a long period of time.

• others

Even though it is baked at the specified temperature, is the hardness insufficient? The truth about the invisible temperature unevenness occurring inside the drying oven.

• others

Even after replacing the filter, the debris doesn't decrease. The truth about work clothes and the attraction of foreign objects due to static electricity, which tends to be overlooked.

• others

Stickiness is not a minor discomfort; it is a serious quality defect caused by insufficient curing or excessive film thickness.

• others

Paint drips are more likely to occur when the three conditions of viscosity, film thickness, and component orientation are disrupted.

• others

Peeling of aluminum die-cast paint occurs due to insufficient management of oil content, voids, and surface conditions.

• others

In an era where paint, energy, and labor costs are rising, effective process management to reduce repainting is essential.

• others

The highest level of "zinc phosphate coating treatment" as a pre-treatment for painting.

• others

Improve the durability of automotive parts with metal coating!

• Painting Machine
• Surface treatment contract service

Leave it to us for metal painting and surface treatment to enhance the safety of playground equipment!

• Painting Machine
• Surface treatment contract service

One window, all solutions. Comprehensive support from pre-processing to delivery.

• others