Resin Product List and Ranking from 457 Manufacturers, Suppliers and Companies

Non-edible biomass-derived cellulose-based biodegradable resin

Highly considerate of both the environment and the economy! Developing biodegradable cellulose-based resins with minimal complex chemical reactions.

There is research and development attempting to create cellulose-based resins by breaking down cellulose with acids or enzymes and converting it into sugars. However, due to the labor-intensive processes involved in the decomposition and pre-treatment stages, there are issues with production costs for practical application. From this perspective, our company is developing biodegradable cellulose-based resins while minimizing complex chemical reactions. As a result, the cost becomes lower during mass production, making it a biodegradable resin material that is considerate of both the environment and the economy. Furthermore, our company already has technology for compounding cellulose nanofibers, which are also plant-derived, with resins. By applying this technology to the material, we can also create a composite material of biodegradable cellulose-based resin and cellulose nanofibers. 【Features】 ■ Minimize complex chemical reactions ■ Lower costs during mass production ■ Highly considerate of both the environment and the economy ■ Composite material of biodegradable cellulose-based resin and cellulose nanofibers is also available ・Improvement in mechanical strength confirmed through cellulose nanofiber compounding *For more details, please refer to the PDF document or feel free to contact us.

Company：GSアライアンス冨士色素株式会社　内
Price：Other

others
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Peptide Research Institute, Inc. - Business Introduction

Contributing to the advancement of life sciences by leveraging the technology developed through peptide synthesis!

Our company aims to contribute to the advancement of life sciences, primarily through research on amino acids, peptides, and sugars, and thereby contribute to the development of human society. We also provide researchers with the highest purity bioactive peptides and reagents that can be used with confidence, which is our fundamental operational policy to support the advancement of basic research. Leveraging our experience and technology backed by fundamental research, we will provide services that meet all needs related to peptides. 【Our Technologies】 ■ Peptide Synthesis ■ Glycan-related Synthesis ■ Peptide Drug Development (GMP) *For more details, please download the PDF or feel free to contact us.

Company：ぺプチド研究所
Price：Other

Peptide synthesis
Others Synthesis
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSR Shell Chair FRP Resin [Matte Black]

Reproduced furniture focused on quality and price from E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture nonprofit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948. It achieved an impressive second place. At that time, Charles Eames was striving to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully produced the chair using FRP, a new material at the time. The chair, produced by layering fiberglass wool with adhesives using a mold and finally shaping the exterior, was released to the world as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, with options for the legs being wood legs or a rod base. This is the side shell chair with a rod base. *The product is a reproduction imported and sold by E-comfort.

Company：川口タンス店 E-comfort東京
Price：10,000 yen-100,000 yen

Office furniture
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSR Shell Chair FRP Resin [Matte Lime]

Reproduced furniture focused on quality and price by E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture non-profit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948. It achieved an impressive second place. At that time, Charles Eames was striving to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully produced the chair using FRP, which was a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, and you can choose between wood legs and a rod base. This is the side shell chair with a rod base. *The product is a reproduction imported and sold by E-comfort.

Company：川口タンス店 E-comfort東京
Price：10,000 yen-100,000 yen

Office furniture
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding SPS engineering plastics for automotive parts and medical devices.

Excellent hydrolysis resistance and chemical resistance! Can be used for connectors and engine control components.

HEVs require handling high currents and high voltages due to the use of high-output motors. Therefore, materials for connectors and terminals must have heat resistance and electrical reliability (high dielectric strength and tracking resistance). "SPS (engineering plastic)" has excellent electrical properties because it does not have polar groups, making it suitable for electrical and electronic components used in HEVs. 【Features】 ■ Low specific gravity (lower than other engineering plastics) ■ Heat resistance (high load deflection temperature 250°C, low load deflection temperature 268°C) ■ Hydrolysis resistance ■ Chemical resistance (acid resistance, alkali resistance, oil resistance, aliphatic solvent resistance) ■ Electrical properties (extremely low dielectric loss, good tracking resistance) *For more details, please refer to the PDF document or feel free to contact us.

Company：多田プラスチック工業
Price：Other

plastic
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic knowledge of rigid polyurethane: Cyclopentane, water resistance (polyether type)

Explanation of the differences between polyether-based and polyester-based materials! Introduction to the basics of rigid polyurethane.

I will introduce the differences between polyether-based and polyester-based materials. The molecular structures of polyester-based urethane and polyether-based urethane are different. Polyether-based urethane contains -O- within its bonding molecules, and in principle, this molecular structure is not affected by H2O (water). In other words, it is a material that is strong against water. An example of this is its use in bathtub covers. On the other hand, polyester-based urethane contains -COO- within its bonding molecules, and this molecular structure tends to react with H2O (water) and decompose into -COOH (acid) and -OH (alcohol). Therefore, polyester-based urethane is generally said to have inferior water resistance. *There are also polyester-based materials with high water resistance. *For more details, please refer to the PDF materials or feel free to contact us.

Company：多田プラスチック工業
Price：Other

plastic
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-Freon insulation foam thermal conductivity initial value 0.021 W/mk

We use materials with an ozone depletion potential of zero and an extremely low global warming potential!

Rigid polyurethane insulation materials with higher thermal insulation performance and technology have become widely used. To promote environmental harmony, our company was one of the first in the country to introduce cyclopentane foaming equipment in 1994 (using materials with an ozone depletion potential of zero and an extremely low global warming potential). Our company turns ideas into "forms" through technology. Please feel free to contact us when you need assistance. 【Specifications】 ■Materials - Polyurethane - Thermosetting resin - Assembled products *For more details, please refer to the PDF document or feel free to contact us.

Company：多田プラスチック工業
Price：Other

Processing Contract
Other contract services
Injection Molding Machine
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding resin

Proposals for metal alternatives in automotive parts are also possible! We introduce resins that excel in chemical resistance and heat resistance.

We would like to introduce the characteristics of resins used in injection molding. "PA6" excels in chemical resistance, toughness, and impact resistance, and has flexibility. "PA66" not only has excellent chemical resistance but also superior heat resistance and mechanical strength compared to nylon 6. "PC (polycarbonate)" boasts excellent transparency, impact resistance, heat resistance, and flame resistance. Additionally, there are many options such as "POM (polyacetal)," which has low water absorption and excellent sliding properties and wear resistance, making it suitable for bearing applications, as well as "PPE" and "SPS." 【Resin Lineup】 ■ PA6, PA66, PBT, PC, POM, PPE, SPS, PPS, PES, PP, ABS *For more details, please refer to the PDF document or feel free to contact us.

Company：多田プラスチック工業
Price：Other

Injection Molding Machine
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble ultraviolet curing resin liquid "ProCrystal UV"

Strong stimulation is absent and safety is high! Water-soluble UV-curing resin that can be cleaned with water.

"Pro Crystal UV" is a water-soluble ultraviolet curing resin that can be easily washed off with water even if it adheres to the human body. It does not have the strong irritating odor found in oil-based UV resins. Additionally, after curing, it maintains hardness and transparency comparable to oil-based UV resins for a long time. [Features] - Being water-soluble, it can be easily washed off with water from hands or body. - It does not have a strong irritating odor like conventional ultraviolet resins. - It cures only with ultraviolet light, making it easy to handle. *For more details, please download the PDF or feel free to contact us.

Company：テムコファイン
Price：Other

Contract manufacturing
Resin processing machine
Coating Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Joint Surface Treatment Agent "Hitlock B"

After applying, it can be tightened after leaving it for more than 48 hours! Bolt joint surface treatment agent.

"Hitlock B" is a joint surface treatment agent that can reliably secure a friction coefficient of 0.45 or higher. It is applied to the joint surfaces of high-strength bolt connections in construction structures, promoting the formation of rust while stabilizing the rust that has developed. Additionally, it can be tightened after leaving it for more than 48 hours after application, and there are no concerns about noise or dust simply by applying it. [Features] - No concerns about noise or dust just by applying it - Can reliably secure a friction coefficient of 0.45 or higher - Can be tightened after leaving it for more than 48 hours after application - Rust is stabilized, and there is no progression of corrosion *For more details, please refer to the PDF document or feel free to contact us.

Company：イチネンケミカルズ
Price：Other

Other consumables
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Joint Surface Treatment Agent "Hitlock K"

No need to collect abrasives generated during blasting! It excels in the efficiency of friction surface treatment work and improves workability.

"Hit Rock K" is a treatment agent that ensures the quality of friction surface treatment and reduces the burden on the surrounding environment. By using power tools to adjust the base on the joint surfaces of existing steel structures and applying this product, it is possible to generate red rust and secure the specified coefficient of friction. Additionally, it allows for construction with minimal equipment and tools, not only shortening the construction period but also improving economic efficiency. [Features] - Shortened construction period and improved economic efficiency - Enhanced quality - Reduced burden on the surrounding environment *For more details, please download the PDF or feel free to contact us.

Company：イチネンケミカルズ
Price：Other

Other consumables
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thorough explanation of the characteristics of acrylic resin.

We will also introduce Daiko's strength in being able to propose window materials and gaskets together!

In the design of industrial machinery and analytical devices, selecting materials for "covers" and "windows" that ensure internal visibility is important. Glass poses a risk of breaking and is too heavy, while polycarbonate is not cost-effective. In such cases, "acrylic resin (PMMA)" becomes a balanced option. This time, we will introduce three technical features that make acrylic suitable for industrial equipment, as well as precision processing services provided by Daiko Co., Ltd. *For more details on the column, you can view it through the related links. For more information, please download the PDF or feel free to contact us.*

Company：ダイコー本社
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antibacterial and antifungal agent "Hybrid Ion Pure"

High safety, heat resistance, and versatility! We introduce an antibacterial and antifungal agent that is effective against bacteria and mold.

"Hybrid Ion Pure" is a highly safe antibacterial and antifungal agent effective against both bacteria and mold, combining inorganic and organic components. Due to its high heat resistance, it can also be added to plastic products during processing. Additionally, its high versatility allows it to be added to a wide range of products, including paints and plastic products. [Features] - Effective against both bacteria and mold with a combination of inorganic and organic components - High safety, heat resistance, and versatility - Can be added to plastic products during processing - Can be added to a wide range of products, including paints and plastic products *For more details, please refer to the external link or feel free to contact us.

Company：石塚硝子新事業・機能材料カンパニー
Price：Other

Other consumables
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass fiber reinforced resin and polyamide resin with excellent strength and heat resistance.

For the metal alternatives in automotive parts and glass alternatives in medical device components. Contributes to weight reduction and cost reduction.

Our company provides glass fiber reinforced resins and polyamide resins that help reduce the weight and manufacturing costs of automotive parts and more. We offer a lineup that includes the glass fiber reinforced resin 'Grivory GVL', which has high energy absorption efficiency during collisions, and the polyamide resin 'Grivory HT6', which maintains high strength and rigidity even at temperatures above 120°C, as well as the transparent polyamide resin 'Grilamid TR', which excels in chemical resistance. We can meet the needs for resin substitution of metals and glass. 【Features】 <Grivory GVL> - Proven track record in automotive headlamp brackets - Contributes to the reduction of the number of parts, total weight, and manufacturing costs by replacing metals <Grivory HT6> - Maintains high strength and rigidity even in high-temperature environments above 120°C - Contributes to weight reduction and cost savings through thinning <Grilamid TR> - Withstands hundreds of steam sterilizations and is reusable - Extremely high transparency and good processability *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Company：エムスケミー・ジャパン
Price：Other

Resin mold
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic raw materials

We handle a variety of products, including general-purpose resins and engineering plastics.

Our company sells plastic raw materials, products, and molding-related items that contribute to energy conservation, as well as biodegradable resins. We are committed to finding solutions to the issues faced by our customers and society, and we will provide value-added proposals with enthusiasm. Please feel free to consult us when needed. 【Business Overview】 ■ Proposal for the installation of environmental products related to plastic raw materials, products, and energy conservation, as well as the sale of biodegradable resins. *For more details, please download the PDF or feel free to contact us.

Company：協栄産業
Price：Other

plastic
Engineering Plastics
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Concrete Structure Pressurized Injection Water Stop System "Vandex Flexin"

A system method that integrates injection materials, injection machines, and construction methods!

The "Vandex Flexin" method is a technique that uses a machine to inject a very low-viscosity acrylic-based two-component synthetic resin into the leaking parts of concrete under high pressure. A hole is drilled at an angle of approximately 45 degrees into the leaking area of the concrete, and using a special nozzle, a hydrophilic injection material can be continuously pressed in at a specified amount, allowing it to fill the entire gap. The injected material becomes a highly elastic resin, demonstrating top-level water-stopping effectiveness. 【Features】 ■ The injected polymer is a durable and elastic hydrophilic high-elasticity resin. ■ The resin can absorb water and expand in volume under wet conditions. ■ The gel time, injection pressure, and injection duration of the injection material can be freely controlled. ■ A method capable of addressing various leakage phenomena. *For more details, please download the PDF or feel free to contact us.

Company：日本バンデックス本社・東日本営業所
Price：Other

others
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High thermal conductivity epoxy resin TE-7162 (1Wm/k)

It is a fast-curing, low-viscosity epoxy resin with high thermal conductivity. Please use it for heat dissipation insulation sealing of electronic devices such as motors, coils, and capacitors.

TE-7162 Two-component heating curing epoxy resin Features: High thermal conductivity, short curing time, low viscosity Applications: Heat dissipation insulation sealing for electronic devices such as industrial motors, coils, transformers, and capacitors ■ Thermal conductivity: 1.0 (W/mK) * For more details, please download the specification sheet from below. * For other thermal conductive resin products, please download the catalog for epoxy & acrylic resins "TERADITE" from below.

Company：寺田
Price：Other

Other polymer materials
Other consumables
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Conductive Flexible Resin TE-8008

This is a flexible epoxy resin of a two-component mixed type with thermal conductivity. It has a thermal conductivity of 1.1 W/mK, flame retardancy equivalent to V-0, and is characterized by crack resistance.

TE-8008 2-component mixed epoxy resin Features: Flexibility, thermal conductivity, environmentally friendly, flame retardant equivalent to V-0, Applications: Sealing and molding for electrical and electronic components requiring crack resistance *Heat resistance is approximately 100°C. *For more details, please download the characteristic table PDF from below or feel free to contact us. *For flexible resins of other grades, please refer to the PDF document "Epoxy & Acrylic Resins 'TERADITE'" available below.

Company：寺田
Price：Other

Other polymer materials
Other electronic parts
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TERADITE High Transparency Epoxy Resin UV Curing Resin

This is a transparent resin with a very high transparency rate of over 95%. It has excellent weather resistance, is resistant to yellowing, and is less prone to foaming. The property sheet is currently available.

It has excellent weather resistance, is less prone to yellowing, and can be used widely from crafts to electronic components. We offer a lineup of one-component UV curing resins and two-component epoxy resins (heat-cured and room temperature-cured). The newly developed product TRU-0222 is a transparent UV curing resin with a refractive index of 1.53 (as noted in the TDS), developed with optical applications in mind. ← Image 2: Comparison image of yellowing with the conventional product (TE-6401). - Under conditions of 60°C for 3 months, the conventional product has yellowed, while the improved current product (TE-6401BL6) maintains high transparency. ← Image 3: Transmission rate curve. - Both the conventional product (TE-6401) and the current product (TE-6401BL6) maintain a transmission rate of over 95% in the visible light range (approximately 450nm and above). The current product absorbs ultraviolet light in the ultraviolet range (approximately 450nm and below), resulting in a resin with low yellowing and high weather resistance. * As of December 1, 2024, the TDS for TRU-0222 has been newly published. * For details, please download the PDF from below or feel free to contact us. * Samples are available, so please inquire.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High heat-resistant liquid epoxy resin series - offering property tables and test data!

We offer a wide range of liquid epoxy resin encapsulants with a maximum Tg (glass transition temperature) of 308°C under our own brand, TERADITE.

Recently, with the trend towards thinner and more highly integrated electronic devices, the importance of thermal management has significantly increased. Our company offers a wide range of one-component and two-component liquid epoxy encapsulants with a maximum Tg of 308°C. These liquid epoxy resins can also be used in areas requiring high heat resistance outside the field of electronic devices. Currently, we are providing a specification sheet and thermal test data for some products! For more details, please check the PDF download below. Feel free to contact us with any inquiries.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flexible and high thermal conductivity liquid epoxy resin series (room temperature curing and heat curing)

Flexible high thermal conductivity (high thermal conductivity) resin with thermal conductivity ranging from 0.9 to 2.8 W/m·K! We have a lineup of four products available for room temperature curing and heat curing!

In recent years, with the miniaturization and high integration of components, there has been a demand for thermally conductive epoxy resins as insulating materials, and stress relief has also become necessary. In response to this need, we have developed a flexible thermal conductive resin series. This product series features low viscosity for ease of use and has thermal conductivity ranging from 0.9 to 2.8 W/m·K. In addition to the conventional heat-curing type, we also offer an environmentally friendly room-temperature curing type. Both types are two-component systems. We also have products that are non-flexible but offer higher thermal conductivity. For more details, please download the PDF "Introduction to TERADITE [Updated on 2024/8/1]" from the link below or check the product page. https://www.ipros.jp/product/detail/2001118658 *For product details, please download the PDF from the link below or feel free to contact us. *On 2024/8/1, the PDF for TE-7172 was replaced with the improved model number TE-7172K. *On 2024/9/24, the PDF for TE-7170 was replaced with the improved model number TE-7170K.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Araldite Urethane System 22B (Elasticity/Low Hardness)

Huntsman manufactured polyurethane resin for potting. Shore A hardness 40, with 350% elongation and low hardness elasticity. In stock at our company. TDS and SDS are available for distribution.

This is a potting and casting polyurethane resin from the global chemical manufacturer HUNTSMAN. 22B is characterized by its elasticity and low hardness. For details, please check the property table below or contact us. Main agent: Polyol 3018B Hardener: Isocyanate 2023

Company：寺田
Price：Other

Other polymer materials
Other electronic parts
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[New Development] Two-Component Room Temperature Curing Epoxy Resin TE-7172K3

Room temperature curing × High thermal conductivity 3.3W/mK × Flexibility! An epoxy resin suitable for stress relief. Ideal for gap filler applications, flame retardant equivalent to V-0.

The TE-7172K3 is a two-component, room-temperature curing epoxy resin developed for heat dissipation insulation applications in electronic and electrical equipment. It can cure at 25°C without the need for heating equipment, making it energy-efficient and adaptable to flexible production processes. Its most notable feature is its high thermal conductivity of 3.3 W/m·K, which is effective for heat dissipation measures for heat-generating components. Additionally, the resin design incorporates flexibility to absorb stress and prevent cracking in substrates and modules. The cured material exhibits balanced properties with a glass transition temperature of -20°C, a coefficient of linear expansion of 24 ppm/K, and a Shore D hardness of 45, combining heat resistance and flexibility. Moreover, it has flame retardant properties (equivalent to UL94 V-0 at 5mm thickness), making it safe for use in electronic devices that require safety. This improved version enhances heat resistance and toughness while inheriting the features of the conventional TE-7172K2. Applications include gap fillers, heat dissipation insulation materials, and encapsulation of electronic components where stress relief is required.

Company：寺田
Price：Other

Other polymer materials
Other electronic parts
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Newly Developed Product: Two-Component Room Temperature Curing Epoxy Resin TE-6430

Room temperature curing type × high thermal conductivity 2.4W/mK! A two-component epoxy resin with excellent heat dissipation insulation. Suitable for thermal management of motors, coils, and sensors.

"TE-6430" is a two-component, room-temperature curing epoxy resin (hard type) developed as an insulating material for heat dissipation in electronic and electrical equipment. It excels in workability due to its ability to cure at room temperature, and it remains low in viscosity after mixing, making it easy to handle. This product has a thermal conductivity of 2.4 W/m·K, making it effective for heat dissipation measures for electronic components that generate heat. Additionally, it possesses flame retardancy equivalent to UL94 V-0 (5mm thickness), allowing for safe use in applications where safety is a concern. 【Features】 ■ Two-component, room-temperature curing epoxy resin (hard type) ■ High thermal conductivity: 2.4 W/m·K ■ Flame retardancy: UL94 V-0 equivalent (5mm thickness) ■ Good workability with low viscosity after mixing ■ High insulation and low water absorption improve the reliability of electronic devices *For more details, we have published the product specification sheet, so please download the PDF from the link below or contact us. *Samples are also available, so please contact us if needed.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Newly Developed Product: Two-Component Room Temperature Curing Epoxy Resin TE-7170K

Room temperature curing × high thermal conductivity × flexibility! An epoxy resin suitable for stress relief. Low viscosity and good workability, equivalent to UL94 V-0.

The "TE-7170K" is a two-component, room temperature curing epoxy resin developed for heat dissipation insulation applications in electronic and electrical equipment. It cures at 25°C without the need for heating equipment, making it energy-efficient and easy to handle on-site. This product has a thermal conductivity of 0.9 W/m·K, making it effective for heat dissipation measures for heat-generating components. Additionally, the resin design incorporates flexibility to absorb and alleviate stress, helping to suppress the occurrence of cracks in substrates and components. It is suitable for applications that require high reliability. With a low viscosity design of 3,500 mPa·s (25°C), it excels in filling details and provides a sufficient working time of approximately 3 hours. 【Features】 ■ Two-component, room temperature curing epoxy resin (mixing ratio 100:20) ■ Effective for heat dissipation measures with a thermal conductivity of 0.9 W/m·K ■ Flexible design that effectively alleviates stress and prevents cracking ■ Good workability with low viscosity and approximately 3 hours of usable time *For more details, the product's specification sheet is available for download as a PDF from the link below, or please contact us. *Samples are also available, so please contact us if needed.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Newly Developed Product] One-component Polyepoxy Acrylate Resin

High-performance UV resin that balances high Tg, LED curing, and transparency.

Conventional transparent epoxy required time and heat for the curing process, but TRU-0222K cures instantly with LED light (1,500mJ/cm²). It uses a light initiator that suppresses yellowing, achieving both high transparency and a hard finish. With low viscosity and excellent workability, it demonstrates high performance in a wide range of applications, including CFRP, resin molded products, craft works, and protection of electronic components. Additionally, its high Tg of 124°C allows it to be used in environments where heat resistance is required. *For more details, please download the PDF or feel free to contact us.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

UV-curable epoxy resin "TERADITE TRU-0260K3"

Curing conditions are UV (metal halide lamp) 6,000 mJ/cm²! High heat resistance, high humidity resistance resin.

"TERADITE TRU-0260K3" is a one-component UV-curable epoxy resin. It is a high heat-resistant and high humidity-resistant resin, designed to prevent dripping. Additionally, it is a high-density resin with a specific gravity of 5.0. It can be used as a resin for balancers in small motors (thickness of 2mm or less). 【Liquid Properties】 ■ Component: Acrylate resin ■ Appearance (visual): Gray liquid ■ Specific gravity (25°C): 5.0 ■ Viscosity (25°C, 10rpm): 45,000 mPa·s ■ Thixotropic index (1rpm/10rpm): 1.2 *For more details, please download the PDF or feel free to contact us.

Company：寺田
Price：Other

Other consumables
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We will add processing to the plastic resin (PA) roller with bearings.

We will add machining to the plastic resin (PA) roller with bearings. Due to the characteristics of the material, we will strive to meet your requirements for tolerances and distortions as closely as possible.

At Takimoto Giken Kogyo Co., Ltd., we will perform additional processing on plastic resin (PA) rollers with bearings. We will create jigs to meet your requested specifications. For industrial machinery related to the automotive sector, rollers often have relatively simple shapes, and those with cutouts tend to be more expensive. In cases of additional processing, jigs are often required. We will perform additional processing based on the specified manufacturer and model, rather than using molded products. We also accommodate additional processing for other products and can handle everything from parts procurement after processing to assembly. NC lathe processing (Okuma) often involves processing R shapes that do not have standard products in small lots through NC processing, and unlike general-purpose machines, there are no tool costs involved. We can flexibly accommodate your company's payment terms, direct shipping, and custom-made products based on actual items. By responding quickly to issues such as unpreventable order omissions and jig breakage, we aim to minimize risks and get closer to your requests. In recent years, user demands have diversified, and we are committed to making efforts to keep up with these changes, so we appreciate your guidance and support. *For more details, please refer to the PDF document or feel free to contact us.*

Company：滝本技研工業
Price：10,000 yen-100,000 yen

lathe
Processing Contract
plastic
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We can handle everything from rubber vulcanization processing to rubber processing from metal.

We can handle everything from rubber vulcanization processing to rubber processing from metal. Due to the characteristics of the materials, we will do our best to meet your requirements for tolerances and distortions.

At Takimoto Giken Kogyo Co., Ltd., we can handle everything from rubber curing processing to processing rubber from metal. In the case of curing processing, it takes time for delivery. We cannot accommodate short delivery times. For industrial machinery related to the automotive sector, there are various shapes of chuck jaws depending on the design, but we can get as close as possible to your requirements through machining. Due to the nature of rubber, tolerances cannot be guaranteed. For simple plate processing (sheet material) using general-purpose milling (Makino), we process it with general-purpose machines that do not require the effort of creating a program. The "inspection method" involves checking the received drawings with a check mark, and for areas with tolerances, we will record the actual measured values. The world of rubber materials differs from metal, mainly resulting in ambiguous dimensional tolerances in the tolerance areas, leading to a temperature difference with manufacturers handling metal processed products. We have finally come this far to meet the needs of our users. I feel this is due to the guidance of all of you. We look forward to your continued support. *For more details, please refer to the PDF materials or feel free to contact us.

Company：滝本技研工業
Price：10,000 yen-100,000 yen

Milling
Processing Contract
plastic
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Kapton (polyimide)

Extremely low generation of outgassing! An engineering plastic with excellent heat resistance and wear resistance.

Our company manufactures precision press-formed products and handles a variety of materials. "Kapton (polyimide)" is a super engineering plastic that exhibits superior heat resistance and wear resistance compared to other engineering plastics. The continuous use temperature is 260°C, the load deflection temperature is 380°C, and it can be used at around 500°C for short periods. It contains very few impurities and has a very low outgassing characteristic due to its high purity. 【Features】 ■ Excellent heat resistance and wear resistance ■ Low impurity content ■ Minimal outgassing *For more details, please refer to the PDF document or feel free to contact us.

Company：堀内発條製作所
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin Product List and Ranking from 457 Manufacturers, Suppliers and Companies | IPROS GMS

Resin Manufacturer, Suppliers and Company Rankings

Resin Product ranking