Resin Product List and Ranking from 448 Manufacturers, Suppliers and Companies

Joint Surface Treatment Agent "Hitlock B"

After applying, it can be tightened after leaving it for more than 48 hours! Bolt joint surface treatment agent.

"Hitlock B" is a joint surface treatment agent that can reliably secure a friction coefficient of 0.45 or higher. It is applied to the joint surfaces of high-strength bolt connections in construction structures, promoting the formation of rust while stabilizing the rust that has developed. Additionally, it can be tightened after leaving it for more than 48 hours after application, and there are no concerns about noise or dust simply by applying it. [Features] - No concerns about noise or dust just by applying it - Can reliably secure a friction coefficient of 0.45 or higher - Can be tightened after leaving it for more than 48 hours after application - Rust is stabilized, and there is no progression of corrosion *For more details, please refer to the PDF document or feel free to contact us.

Company：イチネンケミカルズ
Price：Other

Other consumables
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Joint Surface Treatment Agent "Hitlock K"

No need to collect abrasives generated during blasting! It excels in the efficiency of friction surface treatment work and improves workability.

"Hit Rock K" is a treatment agent that ensures the quality of friction surface treatment and reduces the burden on the surrounding environment. By using power tools to adjust the base on the joint surfaces of existing steel structures and applying this product, it is possible to generate red rust and secure the specified coefficient of friction. Additionally, it allows for construction with minimal equipment and tools, not only shortening the construction period but also improving economic efficiency. [Features] - Shortened construction period and improved economic efficiency - Enhanced quality - Reduced burden on the surrounding environment *For more details, please download the PDF or feel free to contact us.

Company：イチネンケミカルズ
Price：Other

Other consumables
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thorough explanation of the characteristics of acrylic resin.

We will also introduce Daiko's strength in being able to propose window materials and gaskets together!

In the design of industrial machinery and analytical devices, selecting materials for "covers" and "windows" that ensure internal visibility is important. Glass poses a risk of breaking and is too heavy, while polycarbonate is not cost-effective. In such cases, "acrylic resin (PMMA)" becomes a balanced option. This time, we will introduce three technical features that make acrylic suitable for industrial equipment, as well as precision processing services provided by Daiko Co., Ltd. *For more details on the column, you can view it through the related links. For more information, please download the PDF or feel free to contact us.*

Company：ダイコー本社
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antibacterial and antifungal agent "Hybrid Ion Pure"

High safety, heat resistance, and versatility! We introduce an antibacterial and antifungal agent that is effective against bacteria and mold.

"Hybrid Ion Pure" is a highly safe antibacterial and antifungal agent effective against both bacteria and mold, combining inorganic and organic components. Due to its high heat resistance, it can also be added to plastic products during processing. Additionally, its high versatility allows it to be added to a wide range of products, including paints and plastic products. [Features] - Effective against both bacteria and mold with a combination of inorganic and organic components - High safety, heat resistance, and versatility - Can be added to plastic products during processing - Can be added to a wide range of products, including paints and plastic products *For more details, please refer to the external link or feel free to contact us.

Company：石塚硝子新事業・機能材料カンパニー
Price：Other

Other consumables
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass fiber reinforced resin and polyamide resin with excellent strength and heat resistance.

For the metal alternatives in automotive parts and glass alternatives in medical device components. Contributes to weight reduction and cost reduction.

Our company provides glass fiber reinforced resins and polyamide resins that help reduce the weight and manufacturing costs of automotive parts and more. We offer a lineup that includes the glass fiber reinforced resin 'Grivory GVL', which has high energy absorption efficiency during collisions, and the polyamide resin 'Grivory HT6', which maintains high strength and rigidity even at temperatures above 120°C, as well as the transparent polyamide resin 'Grilamid TR', which excels in chemical resistance. We can meet the needs for resin substitution of metals and glass. 【Features】 <Grivory GVL> - Proven track record in automotive headlamp brackets - Contributes to the reduction of the number of parts, total weight, and manufacturing costs by replacing metals <Grivory HT6> - Maintains high strength and rigidity even in high-temperature environments above 120°C - Contributes to weight reduction and cost savings through thinning <Grilamid TR> - Withstands hundreds of steam sterilizations and is reusable - Extremely high transparency and good processability *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Company：エムスケミー・ジャパン
Price：Other

Resin mold
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic raw materials

We handle a variety of products, including general-purpose resins and engineering plastics.

Our company sells plastic raw materials, products, and molding-related items that contribute to energy conservation, as well as biodegradable resins. We are committed to finding solutions to the issues faced by our customers and society, and we will provide value-added proposals with enthusiasm. Please feel free to consult us when needed. 【Business Overview】 ■ Proposal for the installation of environmental products related to plastic raw materials, products, and energy conservation, as well as the sale of biodegradable resins. *For more details, please download the PDF or feel free to contact us.

Company：協栄産業
Price：Other

plastic
Engineering Plastics
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Concrete Structure Pressurized Injection Water Stop System "Vandex Flexin"

A system method that integrates injection materials, injection machines, and construction methods!

The "Vandex Flexin" method is a technique that uses a machine to inject a very low-viscosity acrylic-based two-component synthetic resin into the leaking parts of concrete under high pressure. A hole is drilled at an angle of approximately 45 degrees into the leaking area of the concrete, and using a special nozzle, a hydrophilic injection material can be continuously pressed in at a specified amount, allowing it to fill the entire gap. The injected material becomes a highly elastic resin, demonstrating top-level water-stopping effectiveness. 【Features】 ■ The injected polymer is a durable and elastic hydrophilic high-elasticity resin. ■ The resin can absorb water and expand in volume under wet conditions. ■ The gel time, injection pressure, and injection duration of the injection material can be freely controlled. ■ A method capable of addressing various leakage phenomena. *For more details, please download the PDF or feel free to contact us.

Company：日本バンデックス本社・東日本営業所
Price：Other

others
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High thermal conductivity epoxy resin TE-7162 (1Wm/k)

It is a fast-curing, low-viscosity epoxy resin with high thermal conductivity. Please use it for heat dissipation insulation sealing of electronic devices such as motors, coils, and capacitors.

TE-7162 Two-component heating curing epoxy resin Features: High thermal conductivity, short curing time, low viscosity Applications: Heat dissipation insulation sealing for electronic devices such as industrial motors, coils, transformers, and capacitors ■ Thermal conductivity: 1.0 (W/mK) * For more details, please download the specification sheet from below. * For other thermal conductive resin products, please download the catalog for epoxy & acrylic resins "TERADITE" from below.

Company：寺田
Price：Other

Other polymer materials
Other consumables
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Conductive Flexible Resin TE-8008

This is a flexible epoxy resin of a two-component mixed type with thermal conductivity. It has a thermal conductivity of 1.1 W/mK, flame retardancy equivalent to V-0, and is characterized by crack resistance.

TE-8008 2-component mixed epoxy resin Features: Flexibility, thermal conductivity, environmentally friendly, flame retardant equivalent to V-0, Applications: Sealing and molding for electrical and electronic components requiring crack resistance *Heat resistance is approximately 100°C. *For more details, please download the characteristic table PDF from below or feel free to contact us. *For flexible resins of other grades, please refer to the PDF document "Epoxy & Acrylic Resins 'TERADITE'" available below.

Company：寺田
Price：Other

Other polymer materials
Other electronic parts
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TERADITE High Transparency Epoxy Resin UV Curing Resin

This is a transparent resin with a very high transparency rate of over 95%. It has excellent weather resistance, is resistant to yellowing, and is less prone to foaming. The property sheet is currently available.

It has excellent weather resistance, is less prone to yellowing, and can be used widely from crafts to electronic components. We offer a lineup of one-component UV curing resins and two-component epoxy resins (heat-cured and room temperature-cured). The newly developed product TRU-0222 is a transparent UV curing resin with a refractive index of 1.53 (as noted in the TDS), developed with optical applications in mind. ← Image 2: Comparison image of yellowing with the conventional product (TE-6401). - Under conditions of 60°C for 3 months, the conventional product has yellowed, while the improved current product (TE-6401BL6) maintains high transparency. ← Image 3: Transmission rate curve. - Both the conventional product (TE-6401) and the current product (TE-6401BL6) maintain a transmission rate of over 95% in the visible light range (approximately 450nm and above). The current product absorbs ultraviolet light in the ultraviolet range (approximately 450nm and below), resulting in a resin with low yellowing and high weather resistance. * As of December 1, 2024, the TDS for TRU-0222 has been newly published. * For details, please download the PDF from below or feel free to contact us. * Samples are available, so please inquire.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High heat-resistant liquid epoxy resin series - offering property tables and test data!

We offer a wide range of liquid epoxy resin encapsulants with a maximum Tg (glass transition temperature) of 308°C under our own brand, TERADITE.

Recently, with the trend towards thinner and more highly integrated electronic devices, the importance of thermal management has significantly increased. Our company offers a wide range of one-component and two-component liquid epoxy encapsulants with a maximum Tg of 308°C. These liquid epoxy resins can also be used in areas requiring high heat resistance outside the field of electronic devices. Currently, we are providing a specification sheet and thermal test data for some products! For more details, please check the PDF download below. Feel free to contact us with any inquiries.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flexible and high thermal conductivity liquid epoxy resin series (room temperature curing and heat curing)

Flexible high thermal conductivity (high thermal conductivity) resin with thermal conductivity ranging from 0.9 to 2.8 W/m·K! We have a lineup of four products available for room temperature curing and heat curing!

In recent years, with the miniaturization and high integration of components, there has been a demand for thermally conductive epoxy resins as insulating materials, and stress relief has also become necessary. In response to this need, we have developed a flexible thermal conductive resin series. This product series features low viscosity for ease of use and has thermal conductivity ranging from 0.9 to 2.8 W/m·K. In addition to the conventional heat-curing type, we also offer an environmentally friendly room-temperature curing type. Both types are two-component systems. We also have products that are non-flexible but offer higher thermal conductivity. For more details, please download the PDF "Introduction to TERADITE [Updated on 2024/8/1]" from the link below or check the product page. https://www.ipros.jp/product/detail/2001118658 *For product details, please download the PDF from the link below or feel free to contact us. *On 2024/8/1, the PDF for TE-7172 was replaced with the improved model number TE-7172K. *On 2024/9/24, the PDF for TE-7170 was replaced with the improved model number TE-7170K.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Araldite Urethane System 22B (Elasticity/Low Hardness)

Huntsman manufactured polyurethane resin for potting. Shore A hardness 40, with 350% elongation and low hardness elasticity. In stock at our company. TDS and SDS are available for distribution.

This is a potting and casting polyurethane resin from the global chemical manufacturer HUNTSMAN. 22B is characterized by its elasticity and low hardness. For details, please check the property table below or contact us. Main agent: Polyol 3018B Hardener: Isocyanate 2023

Company：寺田
Price：Other

Other polymer materials
Other electronic parts
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[New Development] Two-Component Room Temperature Curing Epoxy Resin TE-7172K3

Room temperature curing × High thermal conductivity 3.3W/mK × Flexibility! An epoxy resin suitable for stress relief. Ideal for gap filler applications, flame retardant equivalent to V-0.

The TE-7172K3 is a two-component, room-temperature curing epoxy resin developed for heat dissipation insulation applications in electronic and electrical equipment. It can cure at 25°C without the need for heating equipment, making it energy-efficient and adaptable to flexible production processes. Its most notable feature is its high thermal conductivity of 3.3 W/m·K, which is effective for heat dissipation measures for heat-generating components. Additionally, the resin design incorporates flexibility to absorb stress and prevent cracking in substrates and modules. The cured material exhibits balanced properties with a glass transition temperature of -20°C, a coefficient of linear expansion of 24 ppm/K, and a Shore D hardness of 45, combining heat resistance and flexibility. Moreover, it has flame retardant properties (equivalent to UL94 V-0 at 5mm thickness), making it safe for use in electronic devices that require safety. This improved version enhances heat resistance and toughness while inheriting the features of the conventional TE-7172K2. Applications include gap fillers, heat dissipation insulation materials, and encapsulation of electronic components where stress relief is required.

Company：寺田
Price：Other

Other polymer materials
Other electronic parts
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Newly Developed Product: Two-Component Room Temperature Curing Epoxy Resin TE-6430

Room temperature curing type × high thermal conductivity 2.4W/mK! A two-component epoxy resin with excellent heat dissipation insulation. Suitable for thermal management of motors, coils, and sensors.

"TE-6430" is a two-component, room-temperature curing epoxy resin (hard type) developed as an insulating material for heat dissipation in electronic and electrical equipment. It excels in workability due to its ability to cure at room temperature, and it remains low in viscosity after mixing, making it easy to handle. This product has a thermal conductivity of 2.4 W/m·K, making it effective for heat dissipation measures for electronic components that generate heat. Additionally, it possesses flame retardancy equivalent to UL94 V-0 (5mm thickness), allowing for safe use in applications where safety is a concern. 【Features】 ■ Two-component, room-temperature curing epoxy resin (hard type) ■ High thermal conductivity: 2.4 W/m·K ■ Flame retardancy: UL94 V-0 equivalent (5mm thickness) ■ Good workability with low viscosity after mixing ■ High insulation and low water absorption improve the reliability of electronic devices *For more details, we have published the product specification sheet, so please download the PDF from the link below or contact us. *Samples are also available, so please contact us if needed.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Newly Developed Product: Two-Component Room Temperature Curing Epoxy Resin TE-7170K

Room temperature curing × high thermal conductivity × flexibility! An epoxy resin suitable for stress relief. Low viscosity and good workability, equivalent to UL94 V-0.

The "TE-7170K" is a two-component, room temperature curing epoxy resin developed for heat dissipation insulation applications in electronic and electrical equipment. It cures at 25°C without the need for heating equipment, making it energy-efficient and easy to handle on-site. This product has a thermal conductivity of 0.9 W/m·K, making it effective for heat dissipation measures for heat-generating components. Additionally, the resin design incorporates flexibility to absorb and alleviate stress, helping to suppress the occurrence of cracks in substrates and components. It is suitable for applications that require high reliability. With a low viscosity design of 3,500 mPa·s (25°C), it excels in filling details and provides a sufficient working time of approximately 3 hours. 【Features】 ■ Two-component, room temperature curing epoxy resin (mixing ratio 100:20) ■ Effective for heat dissipation measures with a thermal conductivity of 0.9 W/m·K ■ Flexible design that effectively alleviates stress and prevents cracking ■ Good workability with low viscosity and approximately 3 hours of usable time *For more details, the product's specification sheet is available for download as a PDF from the link below, or please contact us. *Samples are also available, so please contact us if needed.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Newly Developed Product] One-component Polyepoxy Acrylate Resin

High-performance UV resin that balances high Tg, LED curing, and transparency.

Conventional transparent epoxy required time and heat for the curing process, but TRU-0222K cures instantly with LED light (1,500mJ/cm²). It uses a light initiator that suppresses yellowing, achieving both high transparency and a hard finish. With low viscosity and excellent workability, it demonstrates high performance in a wide range of applications, including CFRP, resin molded products, craft works, and protection of electronic components. Additionally, its high Tg of 124°C allows it to be used in environments where heat resistance is required. *For more details, please download the PDF or feel free to contact us.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

UV-curable epoxy resin "TERADITE TRU-0260K3"

Curing conditions are UV (metal halide lamp) 6,000 mJ/cm²! High heat resistance, high humidity resistance resin.

"TERADITE TRU-0260K3" is a one-component UV-curable epoxy resin. It is a high heat-resistant and high humidity-resistant resin, designed to prevent dripping. Additionally, it is a high-density resin with a specific gravity of 5.0. It can be used as a resin for balancers in small motors (thickness of 2mm or less). 【Liquid Properties】 ■ Component: Acrylate resin ■ Appearance (visual): Gray liquid ■ Specific gravity (25°C): 5.0 ■ Viscosity (25°C, 10rpm): 45,000 mPa·s ■ Thixotropic index (1rpm/10rpm): 1.2 *For more details, please download the PDF or feel free to contact us.

Company：寺田
Price：Other

Other consumables
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We will add processing to the plastic resin (PA) roller with bearings.

We will add machining to the plastic resin (PA) roller with bearings. Due to the characteristics of the material, we will strive to meet your requirements for tolerances and distortions as closely as possible.

At Takimoto Giken Kogyo Co., Ltd., we will perform additional processing on plastic resin (PA) rollers with bearings. We will create jigs to meet your requested specifications. For industrial machinery related to the automotive sector, rollers often have relatively simple shapes, and those with cutouts tend to be more expensive. In cases of additional processing, jigs are often required. We will perform additional processing based on the specified manufacturer and model, rather than using molded products. We also accommodate additional processing for other products and can handle everything from parts procurement after processing to assembly. NC lathe processing (Okuma) often involves processing R shapes that do not have standard products in small lots through NC processing, and unlike general-purpose machines, there are no tool costs involved. We can flexibly accommodate your company's payment terms, direct shipping, and custom-made products based on actual items. By responding quickly to issues such as unpreventable order omissions and jig breakage, we aim to minimize risks and get closer to your requests. In recent years, user demands have diversified, and we are committed to making efforts to keep up with these changes, so we appreciate your guidance and support. *For more details, please refer to the PDF document or feel free to contact us.*

Company：滝本技研工業
Price：10,000 yen-100,000 yen

lathe
Processing Contract
plastic
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We can handle everything from rubber vulcanization processing to rubber processing from metal.

We can handle everything from rubber vulcanization processing to rubber processing from metal. Due to the characteristics of the materials, we will do our best to meet your requirements for tolerances and distortions.

At Takimoto Giken Kogyo Co., Ltd., we can handle everything from rubber curing processing to processing rubber from metal. In the case of curing processing, it takes time for delivery. We cannot accommodate short delivery times. For industrial machinery related to the automotive sector, there are various shapes of chuck jaws depending on the design, but we can get as close as possible to your requirements through machining. Due to the nature of rubber, tolerances cannot be guaranteed. For simple plate processing (sheet material) using general-purpose milling (Makino), we process it with general-purpose machines that do not require the effort of creating a program. The "inspection method" involves checking the received drawings with a check mark, and for areas with tolerances, we will record the actual measured values. The world of rubber materials differs from metal, mainly resulting in ambiguous dimensional tolerances in the tolerance areas, leading to a temperature difference with manufacturers handling metal processed products. We have finally come this far to meet the needs of our users. I feel this is due to the guidance of all of you. We look forward to your continued support. *For more details, please refer to the PDF materials or feel free to contact us.

Company：滝本技研工業
Price：10,000 yen-100,000 yen

Milling
Processing Contract
plastic
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Kapton (polyimide)

Extremely low generation of outgassing! An engineering plastic with excellent heat resistance and wear resistance.

Our company manufactures precision press-formed products and handles a variety of materials. "Kapton (polyimide)" is a super engineering plastic that exhibits superior heat resistance and wear resistance compared to other engineering plastics. The continuous use temperature is 260°C, the load deflection temperature is 380°C, and it can be used at around 500°C for short periods. It contains very few impurities and has a very low outgassing characteristic due to its high purity. 【Features】 ■ Excellent heat resistance and wear resistance ■ Low impurity content ■ Minimal outgassing *For more details, please refer to the PDF document or feel free to contact us.

Company：堀内発條製作所
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Laminated resin (polyester)

"Type backup resin" with significantly improved elasticity, among others! A rich lineup is available.

We would like to introduce our "Laminated Resin (Polyester)" products. Starting with "S-527(A)PT," which emphasizes transparency and is particularly suitable for the production process of aero parts, we also offer "S-430(A)PT," a type designed to minimize shrinkage and pursue dimensional stability, making it suitable for molding components like rear spoilers. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■ Transparent laminated unsaturated polyester resin "S-527(A)PT" ■ Transparent laminated unsaturated polyester resin "S-556(A)PT" ■ Low shrinkage, low heat generation laminated unsaturated polyester resin "S-430(A)PT" ■ High soft lining unsaturated isophthalic polyester resin "S-435(A)PT" ■ Soft lining unsaturated polyester resin "S-437PT" *For more details, please refer to the PDF document or feel free to contact us.

Company：石川インキ
Price：Other

Composite Materials
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermosetting resin

Established vacuum clamping fixation method! Achieved parallelism of 0.02 with dimensions of 0.4mm × 150 × 400mm.

The processing of thermosetting resins is our "origin." We excel in high-hardness materials and high-precision machining, starting with insulators and large products. Please feel free to contact us with your requests. 【Features】 ■ Cutting technology for high-hardness thermosetting resin materials - High-precision processing of high-hardness epoxy resin materials - Establishing processing conditions from equipment and cutting tools ■ Thin plate cutting technology for thermosetting materials - Established a precision of 0.02 in parallelism with 0.4mm thin glass epoxy material processing - Established a vacuum clamping fixation method *For more details, please refer to the related links or feel free to contact us.

Company：萱野工業
Price：Other

Other machine elements
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermoplastic resin

Ultra-high material cutting technology for thermoplastic resins! Utilizing processing know-how of thermosetting and thermoplastic materials.

Our company actively processes engineering plastics and super engineering plastics. We perform notch and burr-free processing on GF/CF high-content materials and molded products. Please feel free to contact us if you have any requests. 【Features】 ■ Establishment of burr-free processing technology for chemical-resistant valves ■ Ultra-high material cutting technology for thermoplastic resins *For more details, please refer to the related links or feel free to contact us.

Company：萱野工業
Price：Other

Processing Contract
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-quality foil transfer and embossed foil stamping.

Embossing and foil transfer processing can be performed on resin.

Our company specializes in foil transfer and embossing on resins such as acrylic. This processing allows for the expression of a metallic luster that is difficult to achieve with printing and other methods. While it is common to process materials like paper and leather, we focus specifically on resins. By reflecting the "beauty" and "luxury" of foil in our products, we have received praise from a wide range of customers. Examples of processing: - Gaming machines - Cosmetics - Expressing logos in gold foil on molded products *For more details, please download our catalog or feel free to contact us.

Company：智昌加工
Price：Other

Contract manufacturing
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Unsaturated Polyester Resin Product Catalog

Featuring materials for layered molding, resin concrete, accelerators, and more!

This catalog from DIC Material Corporation features a wide range of products under the names of unsaturated polyester resin "Sandoma(R)" and vinyl ester resin "Exdoma(R)" to realize the quality, performance, and functionality that our customers seek, tailored to various applications. Additionally, we have expanded our lineup to include environmentally friendly products such as "Aqualight(R)," which is styrene monomer-free. [Contents (Applications)] ■ For FRP ■ Non-FRP ■ Others *For more details, please download the PDF or feel free to contact us.

Company：DICマテリアル本社
Price：Other

Other consumables
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[G-Eco Series] Environmentally Friendly Water-Based Anti-Mold and Antibacterial Agent

A mold growth prevention zone is formed around the area coated with anti-mold and antibacterial agents, achieving long-lasting anti-mold and antibacterial effects.

A mold and bacteria prevention agent is applied to form a barrier that inhibits mold growth, achieving long-lasting mold and bacteria prevention effects. Being a water-based agent, it has minimal odor, making it ideal for indoor applications. It can be used on wood, wallpaper, and even in food factories and restaurants. It features a dry finish that does not compromise the texture of the material. It is a safe and secure water-based mold and bacteria prevention agent for users and customers. 【Application Examples】 Long-term suppression of mold and bacteria growth on sukiya gates, wooden decks, wooden products, wood components, wallpaper, gypsum board, concrete, stone, tiles, clay walls, diatomaceous earth walls, plaster, exteriors, and porous materials. *For more details, please download the catalog or feel free to contact us.

Company：ハウスステージグローバル・エコロジー環境事業部
Price：Other

Coating Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Free Sample Available] 3D Print Material "Clear Resin" Set

This is a sample set of 3D printing material "clear resin."

DMM.make's 3D printing service provides comprehensive support for manufacturing, from mass production assistance to prototyping, without the use of molds. We offer a wide range of materials, from those with strength comparable to injection molding to softer materials like rubber and silicone. We have received feedback from many companies expressing, "We want to introduce 3D printing technology, but we don't know where to start or which materials are optimal." DMM.make has been providing services since the dawn of 3D printing technology in Japan. We promise to support you in realizing your ideas. First, we will discuss your intended use, requests, and budget in a meeting, and we will also provide samples for free. Please feel free to contact us. The samples introduced on this page are scale samples that show thickness. *The sample plates of the materials listed below are included (a total of 3 pieces). High-precision acrylic | MJT | 3500HDMax Clear acrylic | MJT | J750 Clear resin | SLA The holes and thickness change every 1 mm.

Company：DMM.com DMM.make 3Dプリント事業部
Price：Other

others
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Main types of Teflon

Introducing three types of Teflon, such as "PTFE" and "PFA"!

Here is an introduction to the main types of Teflon. Starting with "PTFE," a common substance that possesses typical properties of fluororesins, there are also "PFA," which has excellent various characteristics and low friction as a perfluororesin. Please leave Teflon processing (fluororesin coating) to us. 【Lineup】 ■ Teflon PTFE ■ Teflon PFA ■ Teflon FEP *For more details, please refer to the external link page or feel free to contact us.

Company：東海ライニング工業
Price：Other

Coating Agent
Wood products
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin Product List and Ranking from 448 Manufacturers, Suppliers and Companies | IPROS GMS

Resin Manufacturer, Suppliers and Company Rankings

Resin Product ranking