Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
271～300 item / All 3763 items
ICB filter
Removal of acids and dissolved metals (ICB). The ICB filter module uses weakly basic anion resin to remove all acids and dissolved metals. Additionally, the ICB filter does not perform actual ion exchange (separation of neutral salts).
Average 0.6 to 3.5 microns! Ultra-fine glass-based fibers utilizing unique technology.
"Filatomixta" is an ultra-fine glass fiber product with an average diameter of 0.6 to 3.5 microns. In terms of thermal properties, it is an excellent insulation material that demonstrates a thermal conductivity equivalent to that of general glass wool insulation at about half the density, allowing for a higher level of insulation effect in limited spaces. Additionally, regarding sound absorption properties, the finer the fiber diameter, the more the air between the fibers is subdivided, enabling efficient absorption of sound energy, making it a fiber material with excellent sound absorption performance. There are two shapes available: wool and felt, which can be used according to the application. [Features] ■ Glass-based ultra-fine fiber product ■ High insulation effect ■ Excellent sound absorption performance ■ Filtration effect ■ Usable according to application *For more details, please refer to the PDF document or feel free to contact us.
Cleaning equipment, clean devices, and chemical filters tailored to customer requirements.
We will provide products tailored to your needs.
We are featuring ultra-high-performance chemical filters!
This catalog is the product catalog of PURATEX, a company that provides chemical air filter-related equipment. It includes an overview of chemical filters, as well as information on environmental measurements in clean rooms, outgassing measurements from material analysis, performance evaluation of chemical filters, and lifespan verification. [Contents] ■ Overview of chemical filters ■ Environmental measurements and material analysis ■ Continuous environmental measurement equipment ■ CS type chemical filters ■ Standard specifications for CS type chemical filters *For more details, please refer to the catalog or feel free to contact us.
We have adopted a triangular-shaped magnet bar to prevent the accumulation of powder particles and the reintroduction of foreign substances.
Magnet filter to prevent the contamination of magnetic foreign substances. With a triangular-shaped magnet bar, it prevents the accumulation of powder particles and the re-entry of foreign substances. ○ This is a magnet filter with a hygienic connection that can be easily connected to piping, such as at the bottom of a supply hopper. ○ The triangular magnets generate magnetic force around the entire perimeter, attracting magnetic foreign substances. ○ The triangular shape allows powder particles to flow smoothly without accumulating on the magnet bar, unlike round shapes. ○ The rounded bottom corners ensure that once foreign substances are attracted, they escape to the bottom, preventing re-entry due to being pushed by powder particles. ○ The magnet bar features full perimeter welding and a smooth finish, offering excellent sanitary properties. ○ The filter exterior can be easily opened and closed with clips.
Acquisition of overseas safety standards! Significant effectiveness in countering conducted noise in the 150 kHz to 30 MHz frequency range.
The "E21NFB Series" is an EMI filter that is highly effective for mitigating conducted noise in the frequency range of 150 kHz to 30 MHz. It is compact, lightweight, and low-profile, achieving effective noise mitigation while saving space. It features a spring-up terminal block that allows for easy installation and comes with a cover for safe use. Additionally, it has obtained UL, EN, and CSA certifications, making it suitable for equipment exported to North America and the EU. 【Features】 ■ Complies with international safety standards ■ Compact, lightweight, and low-profile for space-saving ■ High efficiency and safety in installation shape ■ Utilizes a spring-up terminal block ■ Comes with a cover *For more details, please refer to the PDF document or feel free to contact us.
Measures for kitchen exhaust! Powerful deodorization of kitchen exhaust odors!
The deodorizing filter "Zeogaia" exhibits high deodorizing performance against a wide variety of cooking odors. It is made by combining several types of raw materials suitable for the removal of cooking odors into a filter. In particular, it has high removal performance against burnt odors, which are a major cause of odor complaints and have been difficult for traditional adsorbents like activated carbon to handle. 【Main Features】 ○ High deodorizing performance ○ Low pressure loss ○ High cost performance ○ Soundproofing effect ◎ For more details, please contact us or download the catalog.
![[Case Study] Odor Removal from Food Factory Exhaust with "Zeogaiya"](https://image.mono.ipros.com/public/product/image/e67/2001061641/IPROS66232997488243657192.png?w=280&h=280)
Exhaust countermeasure! Case of supplying ceramic deodorizing filters to food factories and kitchen equipment.
This document introduces examples of the implementation of "Zeogaiya" as a measure for exhaust from restaurants. It provides detailed cases of its introduction for addressing odors from garlic fryers in seasoning factories, soy sauce-related burnt odors in prepared food factories, and stimulating odors from garlic, ginger, and soy sauce in food factories. It also includes information on air volume and deodorization effectiveness, making it a useful reference when considering implementation. We encourage you to read it. [Featured Cases] ■ A certain Chinese restaurant in Nogizaka ■ A certain fried chicken specialty store in Saitama Prefecture ■ A certain supermarket in Kitasenju ■ A certain seasoning factory in Saitama Prefecture ■ A certain prepared food factory in Osaka Prefecture ■ A certain food factory *For more details, please refer to the PDF document or feel free to contact us.
TFI Corporation has significantly improved the production yield of various interference filters through its unique manufacturing technology.
TFI Corporation has significantly improved the production yield of various interference filters through its unique manufacturing technology. As a result, we have achieved low costs and supply primarily to industrial OEMs as our main users. Additionally, all filters undergo scribing processing, enabling performance stabilization and extended lifespan. We offer a wide range of products including bandpass filters, laser line filters, Raman filters, filters for fluorescence microscopy, short pass/long pass filters, hot/cold mirrors, beam splitter mirrors, and color glass filters, among others.
Protects the air conditioning in the factory from oil mist, smoke, chips, and dust!
■Prevention of oil mist and dust intrusion into the air conditioner ■Reduction of odors and stickiness on the factory floor ■No need for filter replacement (filters can be cleaned and reused) ■Safe design that allows confirmation of accumulated collected oil
Optimal for dust collection during powder intake! Achieves stable powder intake and environmental conservation.
The "bug filter" is available in BMB type (backwash type) and H type (suction type). The BMB type (backwash type) allows for stable acceptance into the storage silo with high efficiency and no clogging. The H type (suction type) collects dust forcibly using a suction fan, ensuring a good working environment. You can also rely on us for maintenance and inspection of the delivered equipment. Our dedicated department will fully support stable operation of the equipment. For more details, please contact us.
Adjust the light intensity as desired.
It can accommodate any transmittance specified by the user, and a multilayer film type that reduces surface reflection is also available.
Custom design for specifying the range of transmission or blocking to create a film! Introducing our products.
The "UV/IR Cut Filter" is custom-designed and coated as a long-pass filter that transmits wavelengths longer than a specified wavelength while reflecting shorter wavelengths, or as a short-pass filter that transmits wavelengths shorter than a specified wavelength while reflecting longer wavelengths. Additionally, it is possible to specify the transmission range and the blocking range. With a wealth of available jigs and ideas, we can accommodate extremely short delivery times. Please feel free to consult us when you need assistance. 【Features】 ■ Ability to specify the transmission range and blocking range ■ Extremely short delivery times with a wealth of available jigs and ideas *For more details, please refer to the PDF document or feel free to contact us.
Adjusting to maintain a constant transmission rate! Introducing our products that reduce transmitted light intensity.
An "ND filter" is a filter that attenuates the amount of light transmitted in a selected wavelength range by a constant ratio. By using dielectric and metal films, adjustments to the transmittance are made. Additionally, it has spectral characteristics that ensure a constant transmittance within a specified wavelength range. 【Features】 ■ Adjustment of transmittance ■ Spectral characteristics that maintain a constant transmittance within a specified wavelength range *For more details, please refer to the PDF document or feel free to contact us.
What is the true threat to fluid systems? What is the "chain reaction of wear"? Introducing innovative approaches to improve system reliability. Essential information for safety measures.
Did you know? 80-90% of products manufactured worldwide are made of carbon steel. This carbon steel becomes ultra-hard and ultra-sharp micro-particles due to wear from operation, and when they move freely through fluid system circulation, a destructive process known as "wear chain reaction" occurs. Magnum reliably captures these iron micro-particles, which traditional filtration systems (filter-element type and magnetic type) could not address. Moreover, once captured, the contaminants cannot escape. There is also no clogging, which is common with filters. Is such a thing possible? It is. Its effectiveness has been proven in many field applications.
Report on the installation of lubrication systems for wind power plant gearboxes. For the safety and reliability of fluid systems in environments such as offshore, where regular inspections are difficult.
A Magnum has been adopted for the lubrication line of a 750 kW generator's gearbox located in Sweden. A Magnom Clear 5" was installed downstream of a 10-micron existing filter, and after six months of normal operation, when the internal core was removed, a significant amount of contamination, including metal wear particles as small as 0.2 microns, was found, surprising those involved. Such fine metal contamination can trigger a wear chain in the gearbox, demonstrating the performance of the Magnum filter, which can efficiently and safely remove it. Wind power is gaining attention as one of the measures for SDGs because it can convert approximately 30-40% of the kinetic energy of wind into electrical energy, making it relatively efficient and difficult to emit greenhouse gases. However, due to the difficulty of regular inspections depending on the installation location (such as offshore), the safety and reliability of fluid systems are particularly important.
The cooling system for power plants is important to ensure that equipment operates properly with the appropriate filters, preventing equipment failure and unplanned production stoppages.
Efficient magnetic filters play a significant role in improving the performance of filtration devices and filter systems/fluid control, enhancing/reducing the running costs of systems, and increasing operational rates. They have improved the reliability of systems at nuclear power plants in the Czech Republic. They were introduced to reduce failures of various mechanical devices, such as electric valves in steam lines, which were previously considered impossible to address. Magnum was introduced in the steam generator blowdown sample line of steam generator number 4 at the nuclear power plant. This area is of great interest to the owners and operators of the power plant from the perspectives of efficiency (energy is wasted during the blowdown process, but the efficiency of the steam generator is improved) and safety (especially in nuclear power plants, where the entire steam generation process is strictly managed). In the future, it will be necessary to further increase power generation efficiency to reduce greenhouse gas (carbon dioxide) emissions. Before the installation of Magnum, pollutants continued to circulate through conventional filters (most of which were smaller than 1 micron). These hard and sharp metal particles likely caused chain wear, eroding all valves and stationary parts of the system, thereby threatening the overall safety of the nuclear power plant.
It is possible to capture magnetic particles (submicron 10μm to 0.07μm) that cannot be removed by filters!
Our company's "Magnet Filter (Filtration Device)" has an internal structure that captures sub-micron particles using magnets, while preventing clogging and re-emission. It is a new type of magnet filter. By using it in conjunction with conventional cartridge filters, it reliably removes fine iron powder that cannot be captured by filter paper but can cause significant damage to hydraulic circuits and gearboxes when accumulated. 【Features】 ■ Capable of removing fine particles Can capture sub-micron particles (10μm to 0.07μm) ■ Does not clog Since it does not clog, there is no pressure loss, and even when the capacity for capture reaches its limit, it does not hinder the operation of the device. ■ Strong capturing power Efficiently removes iron powder and other contaminants from liquids. ■ No re-emission Contaminants that have been captured and solidified do not pose the risk of re-emission as clumps. *For more details, please download the PDF or contact us.
Magnetic filter that does not clog the lubrication system of aircraft jet engine gearboxes.
◆High-speed rotating jet engines operate in harsh environments. The important gearbox that assists the jet engine in functioning properly. Lubricating oil must be continuously supplied to each mechanism and circulate smoothly. Challenge: How to efficiently remove sub-micron level hard metal particles floating in the lubricating oil. ◆Introduction Story The development project for a magnetic filter for the gearbox lubrication line, which is crucial to the jet engine, started upon receiving a development request from Rolls-Royce. After more than 10 years of extensive research and testing, it finally received certification as official equipment. And it was ultimately adopted for the Trent 500 turbofan jet engine used in the Airbus A340. The magnetic filter, Magnum, contributes to the safety of air travel.
Can be introduced at low cost! A magnetic filter with no flow reduction or pressure loss. Proven results in various industries such as aircraft engines, power plants, and wind turbines!
Our company's magnet filters (magnetic filters) have a special internal structure that captures submicron particles using magnets, while preventing clogging and re-emission. This is a new type of magnet filter. When used in conjunction with conventional cartridge filters, it reliably removes fine iron powder that cannot be captured by filter paper but can cause significant damage to hydraulic circuits and gearboxes when accumulated. This magnet filter is essential for reducing maintenance frequency and maintaining performance of the equipment. 【Features】 ■ Reduces or eliminates the consumption of expensive conventional filters for end users. ■ Decreases filter replacement frequency, resulting in longer equipment operating time. ■ Effectively captures fine particles that pose a true threat to the equipment. ■ No clogging occurs, preventing pressure loss or flow rate reduction. ■ Significantly improves the cleanliness of the fluid system in the equipment. ■ Easy to install and reasonably priced.
The suspension of cutting fluid is due to the circulation of fine particles that were missed by the existing filter. A special filter reliably captures magnetic fine particles down to 0.07μm!
- Can be installed upstream of existing filters. - Pressure loss, flow rate reduction, clogging, and re-emission are guaranteed to be zero. - Effectively captures metal fine particles down to 0.07μm. - Experience the changes in the suspension state of cutting fluid. - Confirm improvements in product surface roughness and precision with clean cutting fluid. - Significantly reduces the frequency of regular replacements for existing filters. - Contributes to SDGs initiatives by reducing disposal costs. - Effects are sustained by specially arranged permanent magnets. - Reduced frequency of consumable replacements significantly decreases equipment downtime and improves productivity. - Effectively halts the chain reaction of wear, extending the lifespan of tools.
We will completely solve the long-standing issue of small work vehicles equipped with HST that cannot use standard circuit filters! Here is an introduction to an affordable, compact, and easy-to-install product.
The HST allows for stepless speed changes and switching between neutral, forward, and reverse with a single lever operation. However, due to the high-pressure hydraulic lines and the structure where the flow direction of the oil switches bi-directionally every time the work vehicle moves forward and backward, a standard circuit filter cannot be used. A device with two sets of high-pressure filter housings, each equipped with a check valve, is necessary, but there are the following challenges: - It requires a large installation space. - It incurs significantly high costs. In small systems, the only countermeasure possible is to install a strainer at the outlet of the reserve tank at most. Therefore, we have been unable to find appropriate countermeasures for issues caused by fine iron-based contaminants floating in the oil. Magnum solves these problems all at once: - It is compact, easy to install, and very inexpensive. - It can be directly connected to bi-directional lines. - There is almost no pressure loss even when it becomes full of contaminants. - Captured iron-based fine particles do not reflow downstream. - It is suitable for high-pressure lines (guaranteed pressure of 6000 psi). - It captures 99.97% of iron-based contaminants at the 10um level. Please give it a try.
The harsh working environment and the impact of metal contamination on work vehicles are not surprising. Special magnetic filters are also playing a role here.
The harsh working environment of mines and quarries can cause even high-quality work vehicles to fail early in their lifespan. Additionally, excessive downtime due to failures is common in excavation operations. The special magnetic filter "Magnum" reliably captures submicron iron-based particles that are difficult to remove with existing filter systems, preventing pressure loss, clogging, and re-emission. It also demonstrates excellent effectiveness in heavy machinery operating on the front lines of the site, such as large excavators and roof bolters, which are affected by metal contamination in hydraulic systems. Please try the "Magnum," which is performing well in overseas sites.
We will participate online in a technology exhibition hosted by the Nikkan Kogyo Shimbun, providing optimal solutions to the diversifying challenges and needs of manufacturing.
In today's diverse fields such as automotive, aerospace, electronics, medical devices, and food processing industries, there is a demand for unique "technologies" that offer unparalleled high added value and high functionality, requiring advanced manufacturing techniques. The "High Precision and Difficult Processing Technology Exhibition" is a technology exhibition that introduces more advanced manufacturing technologies with the theme of pursuing extremes. Our company will be showcasing a special magnetic filter that can remove ultra-fine metal powders down to 0.07μ, significantly extending machine life.
Despite being a chlorine-free stripping agent, it has excellent stripping power! The environmentally friendly stripping agent "Zolcas Series."
The "Zorkas Series" is a dechlorinated stripping agent that boasts exceptional stripping power while being environmentally friendly. Despite being chlorine-free, it offers remarkable dissolving capability! 【Features】 ■ Achieves stripping power that surpasses conventional chlorine-based solvents ■ Effective for stripping two-component cured paints and adhesives ■ Dissolves various thermosetting resins ■ Zorkas EP-110 is a high-viscosity type ■ Not subject to the Organic Solvent Control Law*1 or the Specific Chemical Substances Control Law*2 *1 Organic Solvent Control Law ⇒ Regulations for the Prevention of Organic Solvent Poisoning *2 Specific Chemical Substances Control Law ⇒ Regulations for the Prevention of Specific Chemical Substance Hazards If you let us know your intended use, we can provide samples as well. Please feel free to contact us!
It comes with adhesive, primer, and syringe tips.
The set includes adhesive, primer, and syringe tips. It is an adhesive that hardens in a few minutes without heating. 【Features】 ○ Kit (adhesive, primer activator, syringe tip) For more details, please contact us.
We can accommodate from mold manufacturing! We will provide selection materials featuring typical sizes, shapes, and specifications.
Our company can provide custom solutions from design support to equivalent products for existing items, such as "transformer coil line filters." For components like bobbins, cores, and fittings that do not have existing materials, we can also accommodate from mold manufacturing. You can view typical sizes, shapes, and specifications via PDF download. We will propose products that meet your requirements, including those similar to the ones listed here, equivalent products, and others. 【Product Lineup】 ■ Transformers for switching power supplies ■ Pulse transformers ■ Current transformers ■ Line filters ■ Choke coils ■ Chip inductors ■ Planar transformers ■ Planar choke coils and more * You can download a catalog of representative products. * For more details, please refer to the PDF materials or feel free to contact us.
Achieving subpixel shift! Filter for fluorescence microscopy.
Chroma, a pioneer in the filter field, offers a wide range of standard products including dichroic filters with sharp rise times and bandpass filters with high signal-to-noise ratios. All filters feature sputter hard coating. We also provide free installation for various filter holders. We have recently completed our Japanese catalog, so please make use of it.
Provides appropriate filters tailored to the characteristics of the light source and camera. Significantly improves image quality in both black and white and color line inspections.
While maintaining a high transmittance, it is more durable and thinner compared to conventional interference filters, has less angle dependence, and is also more affordable.
Introducing the LED surface emission inspection lighting light board PRO series optional products.
The "Color Filter" is a special filter exclusively for the Light Board PROII series. By using this product, you can change to various colors. Our company handles "defect reduction lighting" used in various fields such as LCD products, automobiles, and transparent films. Please contact us if you have any requests. 【Specifications】 ■Product Name: Color Filter (Special filter for color change exclusive to Light Board PROII) ■Model: A*-#* *For more details, please download the PDF or feel free to contact us.
