resin Product List and Ranking from 453 Manufacturers, Suppliers and Companies

Styrene-free polyester resin "Aqua"

[Free Sample Distribution] Polyester resin containing no special management substances such as styrene.

This is a polyester resin for embedding samples. It is a two-component, room-temperature curing resin. The embedding resin is suitable for embedding samples that are prone to deformation due to heat or pressure. Additionally, while polyester resin has lower hardness compared to epoxy resin, it has a faster curing time, making it recommended for those who want to polish samples immediately. Aqua does not contain styrene, which is typically found in polyester, so it is not classified as a "special management substance" under the organic solvent method. We are distributing free samples, so please feel free to contact us if you are interested. 【Features】 - Does not contain styrene - Users are not required to undergo "specific chemical substance health examinations" - Can be stored normally, eliminating the need for management tasks - Suitable for large-scale sample testing - Fast curing time, making it suitable for urgent testing - Inexpensive ★ It is now also available for purchase on Amazon. (Link below)

Company：ハルツォク・ジャパン
Price：Less than 10,000 yen

Printed Circuit Board
Ceramics
Steel
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Free sample will be sent] Sample embedding resin "Phenolic resin"

It is a phenolic resin that is a thermosetting resin. It is used for embedding samples. [Low price, short delivery time, high quality]

It is a thermosetting embedding resin. 【Features】 ◆ It is the most affordable embedding resin among thermosetting resins. ◆ Available in both powder and granule types. ◆ The granule type is available in three colors for identification purposes. ★ It can also be purchased on Amazon. Please check the link below.

Company：ハルツォク・ジャパン
Price：Less than 10,000 yen

Other consumables
Steel
Other abrasives
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Free sample will be sent] Transparent embedding resin 'Acrylic H-2'

This is an acrylic resin for embedding samples. It is transparent, allowing for sample observation from the side. [Low price, short delivery time, high quality]

It is a thermoplastic embedding resin. 【Features】 ◆ It is a high-hardness acrylic resin. ◆ It has high transparency, allowing for the entire sample to be observed. ◆ Alcohol-based lubricants can be used. ★ It is also available for purchase on Amazon. Please check the link below.

Company：ハルツォク・ジャパン
Price：Less than 10,000 yen

Repair Agent
Other consumables
Optical microscope
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance resin DuPont™ Bepel® SP-21

Sliding grade of Bespel® products

If there is stock of the materials for processing, same-day shipping is possible. (Except for the first order)

Company：石原ケミカル高機能材料
Price：Other

Engineering Plastics
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance resin DuPont™ Bepel® SCP-50094

For sliding parts in high load environments and high temperatures!

Based on high-grade polyimide resin SCP-5000, it has lubrication properties and excellent sliding performance due to graphite filling.

Company：石原ケミカル高機能材料
Price：Other

Metal bearings
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DuPont's all-aromatic polyimide resin "Bespel" heat resistance temperature 288°C

Excellent heat resistance with a continuous use temperature of 288°C. Outgassing is also reduced. Material property table and price list are being distributed [Remote consultations are also available].

"Besper" is a DuPont manufactured fully aromatic polyimide resin that boasts exceptional heat resistance, capable of supporting high loads without softening even at high temperatures. In addition to "SP-1," which is made of 100% polyimide resin and excels in mechanical strength and electrical and thermal insulation properties, we offer a variety of grades that can be selected based on application needs, including sliding properties, static elimination performance, and dimensional stability under high loads. 【Features】 ■ Continuous use temperature is 288°C, intermittent use temperature is 480°C ■ Low outgassing, making it suitable for environments requiring high cleanliness, such as the semiconductor field ■ Prevents damage to transported items when used in transport rollers ■ "SP-1" can be used for insulation parts, insulating components, valves, glass substrates, lenses, bearings, transport suction nozzles, seal rings, and plasma-resistant parts. *We are currently publishing a property table that includes "SP-1" and "SCP-5000 (high strength and chemical resistance)," as well as a price list for "SP-1" and "SP-202 (static elimination grade)." You can view it via “PDF download.” Please feel free to contact us with any inquiries.

Company：石原ケミカル高機能材料
Price：Other

Other polymer materials
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PI (Polyimide) "6000 Series"

Material for machining processed by compression molding of PI.

The "6000 Series" is a machining material made from compressed PI (polyimide). PI resin has high mechanical strength and excellent heat resistance, electrical insulation, and chemical resistance, making it widely used in aerospace, automotive, and electrical and electronic fields. 【Features】 ■ Excellent mechanical properties ■ High heat resistance ■ Glass transition temperature: ~335°C ■ Load deflection temperature: ~320°C *For more details, please refer to the PDF materials on the official website or feel free to contact us.

Company：PBIアドバンストマテリアルズ
Price：Other

others
Other polymer materials
resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Composite resin with a high loading of cellulose fibers "GREEN CHIP CMF"

"The convenience of plastic and the eco-friendliness of biomass" - Bio-based composite resin blended with wood-derived cellulose that contributes to sustainability

*During the process from resin manufacturing to incineration, the CO2 emissions of GREEN CHIP CMF, containing 55% cellulose fiber, are expected to be reduced by approximately 35% compared with petroleum-derived ABS resin and by approximately 20% compared with petroleum-derived PP resin. (*1, *2). *Cellulose fiber functions as a reinforcing material, improving tensile strength, flexural strength, flexural modulus, and heat resistance (heat load deflection temperature) compared with unreinforced PP resin. This makes it possible to make molded products thinner and, therefore, contributes to weight reduction. *By adding GREEN CHIP CMF to recycled resin as a modifier, physical properties such as strength, elastic modulus, and heat deflection temperature can be improved, thereby contributing to increased use of recycled resin. *Despite containing 55% cellulose fiber, it achieves flowability equivalent to PP resin and delivers excellent moldability. Existing molds can be used, and the material exhibits low molding shrinkage and excellent dimensional stability. *1 Calculated in-house based on the results report of commissioned work to Osaka University by the Ministry of the Environment (FY2019). *2 Calculated in-house based on the Ministry of the Environment’s "Guidelines for the Utilization of Cellulose Nanofibers."

Company：TOMOEGAWA CORPORATION
Price：Other

Composite Materials
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conveyor Resin Rollers and Related Parts Comprehensive Catalog

Supports molding of various super engineering plastics used in a wide range of fields!

This catalog is a comprehensive catalog featuring "conveyor resin rollers and related components" handled by Chukoh Chemical Industries, Ltd., a comprehensive processing manufacturer of high-performance resins. It introduces conveyor rollers such as "CR" and spurgears like "CSG." Injection-molded products, including conveyor resin rollers, are compatible with various super engineering plastics used in a wide range of fields, including semiconductors, automobiles, industrial equipment, and scientific research. [Contents (excerpt)] ■ About Chukoh Chemical Industries ■ Reasons for choosing Chukoh Chemical Industries ■ Conveyor rollers ■ Guide rollers ■ Spur gears *For more details, please refer to the PDF document or feel free to contact us.

Company：Chukoh Chemical Industries, Ltd.
Price：Other

Plastic bearings
roller
Other machine elements
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Creating 'Multi-functional Integration' with hard resin + soft resin

We propose a higher-level two-color molding with the concept of "multi-functional integration"!

We would like to introduce "Multi-Functional Integration," the core technology of Daisei Plus Co., Ltd. We have achieved the integration of necessary functions for products (such as waterproof buttons, LED lenses, light-shielding ribs, LCD screens, waterproof gaskets, etc.). By forming multiple functions in a single piece, we can reduce assembly labor and lower costs. 【Product Examples】 ■ Item: Waterproof Remote Control Case ■ Product Size: 95mm (H) × 190mm (W) × 17mm (D) ■ Material: PMMA + TPEE ■ Molding Machine: Two-color molding machine (SE280T) ■ Selling Points: Waterproof and cost reduction through two-color molding multi-functional integration *For more details, please refer to the PDF document or feel free to contact us.

Company：大成プラス
Price：Other

Injection Molding Machine
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"PasCom S40" (PA) High Folding and Wear-Resistant Biomass Resin

Wear-resistant, low-density biomass plastic material with excellent low friction properties (biomass content over 95%).

Fossil-derived materials and mineral dependency are reduced, with a focus on resource utilization of abandoned bamboo forests and suppression of bamboo damage, using wear-resistant, low-density biomass materials with excellent sliding properties (biomass content over 95%). Certified biomass mark product.

Company：クラスターテクノロジー本社
Price：Other

Composite Materials
Other machine elements
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin and plastic raw material inspection "Pellet and Powder Foreign Matter Inspection Device"

Ideal for testing resin and plastic raw materials! Our uniquely developed inspection mechanism detects foreign substances and discoloration in pellets and powders! *Detection of 9μm is possible.

The "Pellet and Powder Foreign Matter Inspection Device" is ideal for inspecting resin and plastic raw materials! It incorporates a uniquely developed turntable system with our in-house developed imaging unit, allowing it to distinguish foreign matter without mistakenly identifying bubbles, hollow holes, or irregularities in transparent pellet varieties that are difficult to inspect. 【Key Features】 ● Remarkable detection capability (detection accuracy: standard 16.6μm / high precision 9μm), and it is a compact type that combines an inspection box and control panel! ● Standard equipped with a clean unit, making it compatible with simple clean room environments, suitable for installation in factories. ● Easy operation with a touch panel for setting conditions, followed by automatic inspection with just one button. ● Online automatic inspection is possible by connecting to an automatic sampling line. ● It has a mechanism for recovering foreign matter inside the container through suction by an ejector, which is convenient for analysis and other purposes! For more details, please contact us or refer to the catalog.

Company：ヒューブレイン
Price：Other

Visual Inspection Equipment
Semiconductor inspection/test equipment
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin Molding and Rheology: Session 2 "Classification and Types of Resins"

I will provide a detailed explanation of the types and applications of representative thermoplastic and thermosetting resins using diagrams!

Resin originally refers to a substance secreted by plants, and it is called "resin" in English. This synthetic resin has the general property of softening when heated, allowing it to be molded into any shape, which is why it is also referred to as plastic. The main raw material used to be coal, but since the 1950s, it has been replaced by petroleum. Currently, due to its versatility, it occupies an important position as a fundamental material, similar to steel, cement, glass, wood, and light metals. [Contents] ■ Resin and Plastic ■ Classification of Resins ■ Types and Applications of Thermoplastic Resins ■ Types and Applications of Thermosetting Resins *For detailed content of the column, you can view it through the related links. For more information, please feel free to contact us.

Company：テラバイト
Price：Other

Other analyses
resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Teratec Construction Report: Step Plate

Solving problems caused by sinking and cavities! Case study of cavity filling in footings by Teratech.

We would like to introduce a case where the problems of sinking and voids under bridge approach slabs were resolved using the Teratec method. The "Teratec method" is a technique that fills the "voids" under bridge approach slabs caused by ground subsidence or groundwater, allowing for the restoration of road functionality to a healthy state in a short period of time. 【Problems Encountered】 On a national highway in Ibaraki Prefecture, voids had developed under the approach slabs due to the Great East Japan Earthquake. The dimensions of the approach slab were 8m x 8m, with a maximum void thickness of about 10cm. Restoration was necessary for safety reasons. 【Reasons for Choosing Teratec】 - Short construction period, which reduces stress for road users due to traffic congestion. - The lightweight materials help suppress re-sinking. 【Feedback After Construction】 Traffic regulations allowed for alternating one-lane traffic, and the construction was completed in one day during daylight hours. The construction vehicle used was a 4-ton truck (L=5.6m). Compared to conventional methods, this was a small-scale project that was completed quickly. *For more details, please visit the external link page or feel free to contact us. https://teretek.jp/plus/case/bridge Toll-free number: 0120-873-835

Company：メインマーク【全国対応】／東京・大阪・札幌・仙台・新潟・金沢・名古屋・福岡
Price：Other

others
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

JIZAI

Plastic that does not break, does not shatter, does not get scratched, and can be molded freely as many times as needed.

JIZAI is a plastic that can be freely molded in small lots without the need for mold costs, tailored to customer applications such as protective covers, work holding jigs, and label application guides.

Company：リックス
Price：Other

Other packaging materials
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FluoroClear Pleats All Fluoropolymer GFL Series

Provides a wide range of chemical compatibility and heat resistance! Can be disinfected using compatible chemical agents!

The "GFL Series" is a high-purity FluoroClear filter cartridge designed for highly corrosive wet etching and cleaning applications in the microelectronics industry. Constructed from 100% fluoropolymer materials, the ECTFE hardware and support layer provide a wide range of chemical compatibility and thermal resistance. The PTFE membrane delivers high flow rates and high-purity effluent with low pressure loss. The cartridge can be supplied in a wet pack with hydrogen peroxide preservative in cleaned and dried products or high-purity deionized water. 【Features】 ■ Manufactured in a cleanroom environment to ensure product cleanliness ■ Can be disinfected using compatible chemical agents ■ All components meet the biological safety specifications of plastic USP Class VI -121℃ ■ Compliant with FDA regulations for food and beverage contact use *For more details, please refer to the PDF materials or feel free to contact us.

Company：日本フィルトレーショングループ
Price：Other

filter
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explanatory Material: Introduction to Fluororesin

A clear explanation of fluoropolymer resins with many properties such as heat resistance, chemical resistance, and non-stick characteristics | PTFE and PFA!

We are pleased to offer a free explanatory document titled "Introduction to Fluororesins" from our company, which specializes in the molding and processing of super engineering plastics! Fluororesins possess many excellent characteristics such as heat resistance, chemical resistance, non-stick properties, lubricity, and electrical properties, and they are utilized in various fields. This document clearly introduces the five major characteristics of fluororesins, usage situations by field, and examples of applications. Additionally, it includes a wealth of useful information on the types of fluororesins and molding methods. 【Contents】 ★ Benefits of fluororesins ★ Examples of fluororesin applications ★ Classification of plastics ★ Quick reference table of main plastic properties ★ Usage situations of fluororesins by field ★ Types of fluororesins and their features ★ Main molding methods for fluororesins… and more.

Company：MEIKO KOGYO CO., LTD.
Price：Other

Engineering Plastics
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Properties of fluororesins: PTFE, PFA, etc.

The highest class of heat resistance among plastics! Introducing the properties of fluororesins such as PTFE and PFA.

This document presents the characteristics of fluoropolymer resins such as PTFE and PFA, including their heat resistance, cold resistance, chemical resistance, low friction, and non-stick properties. - The highest class of heat resistance among plastics - Can be used in extremely low-temperature environments - Resistant to most chemicals - Low refractive index and high transparency - Excellent self-lubrication with the minimum friction coefficient - Flame-resistant and fireproof fluoropolymer resins - Excellent for long-term outdoor use - Softer fluoropolymer resin among plastics - Fluoropolymer resins are heavy and have a high density - Surface energy is extremely low

Company：MEIKO KOGYO CO., LTD.
Price：Other

plastic
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What are fluororesin PTFE and PFA?

Fluororesin | Introduction to the positioning and applications of PTFE, PFA, etc., and the molding methods of fluororesins!

Fluororesin is made from a rare stone called fluorite. It possesses strong characteristics such as heat resistance, chemical resistance, electrical insulation, non-stick properties, and slipperiness, making it suitable for use in various forms in harsh environments and specialized fields. Utilizing these features, it plays an important role in everyday items like cooking utensils, as well as in cutting-edge industries such as semiconductors, chemicals, electronic machinery, batteries, medical applications, aerospace, and space exploration. 【Features】 ★ Heat resistance ★ Chemical resistance ★ Wear resistance ★ Non-stick property ★ Electrical insulation ★ Weather resistance

Company：MEIKO KOGYO CO., LTD.
Price：Other

plastic
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Studies for Solving Issues with Fluororesins 1: PTFE, PFA, etc.

Fluororesin Utilization CASE 1: Reducing maintenance costs with higher strength fluororesin!

The case study collection for problem-solving explains common issues and their solutions regarding fluororesins such as PTFE and PFA. Please feel free to consult us with any small concerns, such as "Can Meiko Industry do this?" ★ We are currently offering a document summarizing "case studies utilizing fluororesins" by Meiko Industry ★ *Please view the case study collection as a PDF file available for download.*

Company：MEIKO KOGYO CO., LTD.
Price：Other

Engineering Plastics
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mikou Industries pursuing fluororesin | Manufacturing of completely voidless materials

Reduce defects in the manufacturing of voidless materials! Leave the molding and processing of fluororesin | PTFE, PFA, and engineering plastic products to us!

We manufacture exceptionally strong, voidless materials through isostatic molding! 【Features】 ★ Superior strength material Isostatic molding utilizes water pressure to compress raw materials, allowing for uniform pressure on the molded products, resulting in materials with excellent strength. ★ Reduction of defects in molded products By preventing internal defects, we can avoid causes of strength reduction and damage in products, thereby reducing defects. ★ Stability regardless of size or shape We achieve stable materials regardless of the size or shape of the molded products.

Company：MEIKO KOGYO CO., LTD.
Price：Other

Other machine elements
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin | PTFE, PFA products available for local production in China!

Fluororesin | Molding and processing of PTFE and PFA available at factories in China!

Fluororesin | We also accommodate the manufacturing of PTFE and PFA products in our factory in China. If you are considering mass production in China to meet local demand, please feel free to consult with us. ★ We own a factory in Guangdong Province, China (joint venture). ★ We provide technical support and advice on mass production environments from Meiko Industry, pursuing high-quality and reliable manufacturing. ★ Meetings can be held in either Japan or China.

Company：MEIKO KOGYO CO., LTD.
Price：Other

Other machine elements
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Properties of fluororesin | Chemical resistance - strong against chemicals

Fluororesin | PTFE, PFA, etc. are resistant to most chemicals!

Fluororesins such as PTFE and PFA exhibit excellent chemical resistance and are not affected by most solvents. This document outlines the properties of fluororesins, including heat resistance, cold resistance, chemical resistance, low friction, and non-stick characteristics. - Highest class heat resistance among plastics - Usable in extremely low-temperature environments - Not affected by most chemicals - Low refractive index and high transparency - Minimal friction coefficient with excellent self-lubricating properties - Flame-resistant and fireproof fluororesins - Excellent for long-term outdoor use - Softer fluororesins compared to other plastics - Fluororesins are heavy and have a high density - Surface energy is extremely low

Company：MEIKO KOGYO CO., LTD.
Price：Other

plastic
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Properties of fluororesin | Wear resistance and slippery surface

Fluororesins such as PTFE and PFA have the lowest wear coefficient and excellent self-lubricating properties!

Fluororesin | PTFE, PFA, etc. have the smallest wear coefficient among all solids! Utilizing their wear resistance, they are used in mechanical parts and automotive components. This document outlines the properties of fluororesins, including heat resistance, cold resistance, chemical resistance, low friction, and non-stick characteristics. - Highest class heat resistance among plastics - Usable in extremely low-temperature environments - Resistant to most chemicals - Low refractive index and high transparency - Minimal friction coefficient and excellent self-lubrication - Flame-resistant and fireproof fluororesin - Excellent for long-term outdoor use - Softer than other plastics - Fluororesins are heavy and have a high density - Surface energy is extremely low

Company：MEIKO KOGYO CO., LTD.
Price：Other

plastic
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Properties of fluororesin | Non-stick and difficult to adhere

Fluororesin | The surface energy of PTFE, PFA, etc. is extremely low!

Fluororesin | PTFE, PFA, etc. are substances that are difficult to adhere to and have excellent non-stick properties! This document presents the characteristics of fluororesins, including heat resistance, cold resistance, chemical resistance, low friction, and non-stick properties. - The highest class of heat resistance among plastics - Usable in extremely low-temperature environments - Not affected by most chemicals - Low refractive index and high transparency - Excellent self-lubricating properties with minimal friction coefficient - Flame-resistant and fireproof fluororesin - Excellent for long-term outdoor use - Softer than other plastics - Fluororesins are heavy and have a high density - Extremely low surface energy

Company：MEIKO KOGYO CO., LTD.
Price：Other

plastic
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pursuing fluororesin, Meiko Industry | Wide-ranging support from small to large-scale production.

With three manufacturer functions, we provide consistent support from small quantities to mass production! Leave the molding and processing of fluororesin | PTFE, PFA, and engineering plastic products to us!

The three processes that are typically handled by separate companies—material manufacturing, processing, and molding—are completed by a single company. By conducting everything from material creation to processing and molding in-house, we can respond flexibly and swiftly to needs ranging from prototyping and small-scale production to mass production. Meiko Industry's "Three Manufacturer Functions" ★ Material Manufacturer Function This process involves compressing powdered fluororesin raw materials at high pressure and sintering them to produce rod-shaped fluororesin materials. While many processing manufacturers procure materials externally, Meiko Industry manufactures the materials itself. ★ Processing Manufacturer Function We perform processing such as cutting, slicing, and hollowing on the rod-shaped materials we manufacture in-house, finishing them into products tailored to specific applications and specifications. Our deep understanding of the material's characteristics allows us to achieve high-precision and high-quality processing. ★ Molding Manufacturer Function We melt bead-shaped fluororesin raw materials, pour them into molds, and cool them to solidify, efficiently mass-producing products of the same shape. This method excels in quality stability and reproducibility during mass production, offering cost advantages as well.

Company：MEIKO KOGYO CO., LTD.
Price：Other

plastic
valve
Engineering Plastics
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat-resistant ceramic-based adhesive

A tough ceramic-based adhesive that withstands 2000°F.

It is a heat-resistant insulating ceramic adhesive from Sauereisen Cements in the United States that withstands temperatures of 2000°F.

Company：東京新資材
Price：Other

Lamps and light emitting devices
Ceramics
glue
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High quality, high performance ion exchange resin

Introducing ion exchange resins. With our extensive experience and diverse product range, along with broad application technologies and product development, we will respond accurately and swiftly to our customers' needs. 【Product List】 ○ Cation Resins ○ Anion Resins ○ Mixed Bed Resins ○ Chelating Resins ○ Special Resins ○ We also offer additional grades of resins for various applications. *For other functions and details, please download the catalog or feel free to contact us.

Company：フィーブリケミカル
Price：Other

others
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-quality, high-performance ion exchange resin "IRION Series"

Covers a wide range of applications such as ultrapure water, chemical solution purification, and wastewater treatment.

The high-quality, high-performance ion exchange resin "IRION Series" offers a diverse range of variations tailored for specific purposes, including "cation resin," "anion resin," "mixed bed resin," and "chelate resin," as well as "special resins" designed to remove nitrate nitrogen, fluoride, arsenic, and more. 【Main Product Lineup】 ■ Cation Resins (Strong Acid: Gel Type) (Weak Acid: Gel Type, Macroporous Type) ■ Anion Resins (Strong Basicity, Weak Basicity: Gel Type, Macroporous Type) ■ Mixed Bed Resins (Cation/Anion) ■ Chelate Resins (Removal of Heavy Metals, Mercury, Boron) ■ Special Resins (Removal of Nitrate Nitrogen, Fluoride, Arsenic) *For more details, please download the PDF or feel free to contact us.

Company：フィーブリケミカル
Price：Other

Other polymer materials
resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

resin Product List and Ranking from 453 Manufacturers, Suppliers and Companies | IPROS GMS

resin Manufacturer, Suppliers and Company Rankings

resin Product ranking