Visual inspection equipment Product List and Ranking from 72 Manufacturers, Suppliers and Companies

LabVIEW + IMAQvision Image Processing Example IC Appearance Inspection Device

LabVIEW + IMAQvision Image Processing Example [IC Appearance Inspection Device]

■Overview - A device for inspecting the appearance of IC chips packaged in transparent film. - Sequentially inspects film packages wound on reels and rewinds them onto the opposite reel. ■Inspection Items - Bending and missing leads, presence of markings and dirt. - Chipping and scratches on the chip, reverse orientation. ■Features Captures IC images through the film, ignoring wrinkles and scratches on the film itself during inspection. ■Development Scope Complete development of reel winding device, hardware, control software, and image processing software. ■Applications - Appearance inspection on inspection lines. - Defect analysis.

Company：ペリテック神奈川エンジニアリングセンター、東京営業所、ベトナム事業所
Price：Other

Visual Inspection Equipment
Image analysis software
Image Processing Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance Inspection Machine RB-101

Achieve space-saving, low cost, and high functionality!

Using our company's unique rotary positioning device function, it demonstrates its power in inspecting cylindrical mouth surfaces, bottom surfaces, outer peripheries, and specific locations on the outer periphery. 【Features】 ■ Inspection of specific locations is possible during side inspections. ◎ For square bottles, inspection can be performed on two sides without labels and at the four corner areas. ■ Two full inspections are conducted during side inspections. ■ The mouth area undergoes triple checks. ■ The bottom inspection can also check the lower side. ■ Compared to similar machines from other companies, the installation area is about 1/2.5, making it space-saving. ■ It is easy to install and energy-efficient. ■ Excellent operability. ◎ Inspection status management can be conducted offline using communication software. ◎ Inspection accuracy can be preset in three stages, preventing unnecessary NG detections. *For more details, please refer to the catalog and feel free to contact us.

Company：コオエイ
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[System Example] Image Inspection, Counting, Packaging

We have many achievements, including "screw inspection devices" and "medical component UV printing devices."

We have numerous achievements in custom-made systems tailored to our customers' work and production lines. Here, we will introduce examples of "image inspection, counting, and packaging." We have many accomplishments, including "screw inspection devices" and "medical parts UV printing devices." We capture the production line through system design and manufacturing, creating various parts feeding solutions. Please feel free to consult us when needed. [Example of Equipment: Inspection Devices] - O-ring appearance inspection - Seal washer appearance inspection - Retaining ring inspection - Chip appearance inspection - Appearance after molding of door parts - Appearance after molding of cathode parts *For more details, please refer to the external link page or feel free to contact us.

Company：村田精工本社　営業本部
Price：Other

Other image-related equipment
Other inspection equipment and devices
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection device "GK-2000"

Appearance Inspection Device "GK-2000"

■ Low-cost appearance inspection device based on a computer ■ System configuration can be selected from standard, high-performance, and low-cost versions according to application ■ Capable of saving images and information of defective parts, and displaying maps ■ Parallel processing of multiple cameras is possible ■ Flexible parameter settings can be configured through programming

Company：シー・シー・デー
Price：Other

Image Processing Equipment
Visual inspection equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction of 'Appearance Inspection Equipment' for detecting scratches and dents *Handbook provided

Ultra-thin workpieces with a thickness of 0.1mm and thin cylindrical workpieces can be inspected for appearance at ultra-high speed and high precision! High-speed inspection of over 1000 pieces per minute is possible!

Eiko Sangyo offers a wide range of "visual inspection devices" to solve common concerns heard in manufacturing sites for automotive parts and semiconductors, such as "we have no choice but to rely on manpower for large-scale inspections," "inspection accuracy varies depending on the skill level of the personnel," and "there is strong pressure for cost-cutting and short delivery times." *We are currently offering a "Visual Inspection Device Implementation Handbook" that combines our products with implementation results! This material clearly explains the benefits of our "visual inspection devices," which provide uniform results regardless of who conducts the inspection. [Currently Featured Visual Inspection Devices] ■ "For Thin Workpieces" capable of high-speed inspection of over 1,000 pieces per minute ■ "For Thin Cylindrical Workpieces" achieving high-speed full circumference inspection using a horizontal index ■ "For Conical Workpieces" capable of full circumference inspection of irregularly shaped workpieces such as bullet shapes ■ "For Internal Burr and Scratch Inspection" automatic inspection of burrs on nuts and bushes without rotation *For more details, please refer to the handbook available for download.

Company：英光産業
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance Inspection Device i Series

The compact and high-precision automatic appearance inspection device, the i series, is capable of handling various appearance inspections, including bottles.

Using our in-house image processing equipment and cameras, our experienced staff will propose the optimal inspection system for our customers. Even workpieces that are typically difficult to inspect due to product step differences can be inspected using our original algorithm's multi-vector search and our in-house multiple imager cameras. Additionally, a remote control function can be added as an option. This allows for the management of multiple visual inspection devices without being near the inspection machine. We contribute to your quality control with high-precision and stable inspections.

Company：デクシス
Price：10 million yen-50 million yen

Visual Inspection Equipment
Image Processing Equipment
Visual inspection equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection device

Achieving standardization and speed of inspection within 3 seconds through image analysis! In addition to full inspection, internal inspections such as for casting defects are also possible.

By utilizing an appearance inspection device system that captures the workpiece with a camera and determines OK or NG based on pre-set measurement ranges, items, and criteria, we can standardize and stabilize inspections that previously relied on human eyes and intuition. Additionally, we can propose solutions for cases where high-speed processing per unit is necessary, as we have achieved standardization and acceleration through appearance inspection using image analysis. Internal inspections, such as for casting defects, are also possible. Please feel free to consult us if you have any concerns. 【Flow of Appearance Inspection】 ■ Move and sort the workpiece to the designated position ■ Capture images with a camera equipped with sensors ■ Analyze the captured information ■ Display the judgment *For more details, please refer to the PDF document or feel free to contact us.

Company：ティーエイチエー
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Company Overview

A group of engineers full of personality! We are always striving for a higher level of engineering expertise.

Employees of Hubrain Co., Ltd. each have rich personalities and are always aiming to become higher-level engineers. The work of technological development always involves trial and error. We value an environment where we can challenge unknown fields with free thinking, without fearing failure. We believe that incorporating a performance-based evaluation system with a principle of positive thinking will nurture each individual's motivation, leading to good work. Although we are still a small group, we want to walk forward strongly with dreams of soaring high into the future. For more details, please contact us or refer to our catalog.

Company：ヒューブレイン
Price：Other

Visual Inspection Equipment
Other image-related equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Handbook "Key Points for Introducing Image Inspection Systems" Free Gift

I will teach you the key points for introducing an image inspection system! Right now, we are giving away a handbook.

Machine manufacturers, inspection equipment manufacturers, and system integrators won't tell you the "key points for introducing image inspection systems." We will. Right now, we are offering a handbook for free. 【Examples of content included in the handbook】 ■Common issues in visual inspection and image processing ■Comparison table of suppliers for visual and image inspection equipment ■Solutions for problems in visual and image inspection ■About Vision Lab for visual and image inspection... *You can view up to page 3 from "Download." If you would like the handbook, please request it from "Request Materials."

Company：因幡電機産業産機カンパニー
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of Automated Visual Inspection: Inspection Example of Long Metal Parts

A case study of automating visual inspection by capturing images of long items such as pipes and steel materials using multiple cameras and lighting for inspection!

Would you like to switch the inspection of surface scratches, dents, and foreign objects on long items such as pipes and steel materials from "visual inspection" to "automated inspection using cameras"? We would like to introduce a case study of a hand-held inspection device that uses multiple cameras and lighting for the appearance inspection of long items, which cannot be captured by a single camera. This system is a hand-held inspection device that installs multiple cameras and lighting on an inspection stand, allowing for the assessment of scratches, dents, and foreign object adhesion on the surface of long workpieces. By analyzing images captured by multiple cameras simultaneously, there is no need to move the workpiece sequentially under the camera, and inspections can be performed in a short time. 【Features of this system】 - A simple inspection system that does not require a moving device, with multiple cameras and lighting installed on the inspection stand. - Capable of inspecting objects that are too long to be captured by a single camera in one go. - The device can be modified based on the inspection requirements. *First, we will verify whether the workpieces you wish to inspect can be inspected. *Detailed processing information and flow are provided in the PDF.

Company：エーディーディー
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case study of automated appearance inspection: Example of parallelism inspection of metal plates using a 3D sensor.

An example of automated visual inspection that checks whether the surfaces of two stacked steel plates are parallel using a 3D sensor!

In the inspection of the parallelism of each surface of two stacked steel plates, would you consider switching from "manual measurement inspection" to "automated inspection using a 3D sensor"? We will introduce an inspection device that uses a scalar robot on a fixed frame to measure both surfaces of the two steel plates simultaneously. With the 3D sensor in operation, it becomes possible to measure the parallelism of the entire two steel plates by scanning each surface. 【Features of this system】 ■ Realization of a parallelism inspection device that is difficult to achieve visually by using a 3D sensor ■ Numerical representation of the parallelism for multiple components ■ The device can be modified based on the inspection requirements *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are included in the PDF.

Company：エーディーディー
Price：Other

Image Processing Software
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of Automated Visual Inspection: Gear (Appearance and Dimension) Inspection Example

Introduction of an inspection automation case using a rotating jig, 3D sensors, and cameras to inspect the appearance and dimensions of gears.

Regarding the inspection of defects such as chipped teeth and burrs on gears, as well as dimensional measurements like tooth width, would you consider switching from "visual inspection" to "automated inspection using 3D sensors and cameras"? We would like to introduce a case study of an inspection device that sets the gear on a rotating fixture and conducts inspection and measurement using 3D sensors and cameras while it rotates. By rotating the gear on the fixture and using 3D sensors and cameras to check the condition of the sides, it becomes possible to perform both tooth condition inspection and dimensional inspection simultaneously. 【Features of this system】 - Realization of an inspection device that can check the entire gear using a rotating fixture. - Compatible with various types of gears, including spur gears and helical gears. - The device can be modified based on the inspection requirements. *First, we will verify whether the workpiece you wish to inspect can be inspected. *Detailed processing information, including details and processing flow, is provided in the PDF.

Company：エーディーディー
Price：Other

Image Processing Software
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of Automated Visual Inspection: Example of Log Periphery Inspection Using 3D Sensors

An example of automated visual inspection using a 3D sensor to measure the outer conditions such as the thickness and surface state of logs during transportation!

Regarding the inspection of the outer conditions such as the thickness and surface condition of logs during transportation, would you consider switching from "manual measurement" to "automatic measurement using 3D sensors"? By installing 3D sensors around the logs on the transportation line and scanning the surface, we can create a system that automatically measures thickness and surface conditions without the need for separate measuring devices. For large materials such as logs that are cumbersome to handle, measuring on the transportation line can also reduce the workload for subsequent tasks. 【Features of this system】 ■ Measurement can be performed on the transportation line without the need for separate inspection devices. ■ By attaching sensors to the transportation line, the measurement process can be streamlined. ■ The use of 3D sensors enables the realization of inspection devices that can measure the size and depth of defects. ■ The device can be modified based on the inspection requirements. *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are provided in the PDF.

Company：エーディーディー
Price：Other

Image analysis software
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inspection and Measurement System Case Study (Speeding Up Inspection Tact)

24-hour, 365-day line operation is possible! Here are examples of established traceability.

We would like to introduce a case study of the inspection machine implemented by JUKI Corporation. Our customers have expressed concerns such as "the manual visual inspection requires significant labor from multiple inspectors" and "there is variability in the results of visual inspections." After the introduction of the inspection machine, we have received feedback that it has enabled labor reduction and improved inspection quality by eliminating visual inspections. 【Case Overview】 ■ Customer Concerns - Manual visual inspection requires significant labor from multiple inspectors - There is variability in the results of visual inspections - Recording and transcribing inspection results takes time - For critical safety components that require strict inspection quality, inspection time and labor are particularly burdensome *For more details, please refer to the PDF document or feel free to contact us.

Company：ＪＵＫＩ
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ROLIS Crankshaft Appearance Inspection Device

Synchronize the control of the work rotation and camera position! Capable of handling eccentric shapes.

The "ROLIS Crankshaft Appearance Inspection Device" has become capable of handling eccentric shapes such as crankshafts by synchronizing the control of the workpiece rotation and the camera's position. 【Specifications】 ■ Control and imaging via computer - Simultaneous control of four axes: camera front/back, up/down, left/right, and shaft axis rotation ■ Detection targets: casting defects, scratches, and chips of 0.1mm or more ■ Resolution: approximately 5μm ■ Imaging width: 20mm ■ Cycle time: 3 seconds per crank pin *For more details, please refer to the PDF document or feel free to contact us.

Company：ユキ技研検査装置事業部
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ROLIS Camshaft Appearance Inspection Device

Synchronize the control of the work rotation and camera position! Capable of handling elliptical shapes.

The "ROLIS Camshaft Appearance Inspection Device" has become capable of handling elliptical-shaped workpieces such as camshafts by synchronizing the control of the workpiece rotation and the camera's position. It can also be applied to eccentric shapes such as crankshafts. 【Specifications】 ■ Control and imaging via computer - 4-axis control: camera front/back/up/down and workpiece rotation ■ Resolution: approximately 14μm ■ Imaging width: 30mm ■ Cycle time: 0.8 seconds per cam *For more details, please refer to the PDF document or feel free to contact us.

Company：ユキ技研検査装置事業部
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[All 7 Case Studies Released] Free Distribution of Case Study Collection on the Introduction of Inspection Equipment and Automation Machinery!

We solve problems such as high-precision work positioning taking time, frequent oversights in visual inspections, and many mistakes in bagging errors!

In this document, you can find seven case studies demonstrating how our company’s "customized inspection equipment and labor-saving machines" have achieved improvements in productivity and quality. Examples include the automation of bagging operations, which were previously done by six people, covering counting, packaging, and quality judgment, as well as cases where thorough inspection of parts has reduced the oversight of defects. If you are looking for ways to reduce labor costs and human errors, please take a look. 【Featured Case Studies *Excerpt】 - Want to improve efficiency in the inspection process but lack space for large equipment. - Inspection of a single product, such as writing and reading tests, takes a long time. - Inspecting a large number of fine workpieces incurs costs such as labor expenses. *For more details, please refer to the document. Feel free to contact us as well.

Company：日東公進
Price：Other

others
Food Packaging Machinery
Other packaging machines
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Production Example] Update of Appearance Inspection Machine (Automotive Parts / Inspection)

Reduction of misjudgment, improvement of production capacity, and realization of labor-saving.

<Background of Introduction> The customer was operating an appearance inspection machine from another company, but due to the inconsistent speed of product transport, frequent misjudgments (classifying good products as defective) became a significant issue. Therefore, they consulted us about the production of a device that could operate more stably as part of their equipment update. <Suggested Proposal> After examining the current device, we determined that there was a fundamental problem in the process of supplying products to the inspection section. Consequently, we proposed a new device concept focused on improving the transport method. Additionally, we noticed issues with maintainability, so we also proposed a design aimed at enhancing the efficiency of maintenance tasks. <Effects After Implementation> With the introduction of the new device, misjudgments have been eliminated, and stable appearance inspections have been achieved. Furthermore, this has led to a reduction in labor in the inspection process and cost savings, earning high praise from the customer.

Company：日本ベンチャー工業
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection device "Card"

We conduct high-speed inspections of the appearance of various cards using our unique image processing technology and transportation.

The independently developed image processing device automatically follows the transport speed, enabling high-speed inspection (up to approximately 9,000 pieces per hour). By multiple registration of reference images, inspections that allow for variations in good products are achieved. The patented "line block position correction" function enables high-precision inspections. It is equipped with a dedicated algorithm for detecting missing characters. 【Features】 ○ The inspection analysis system "VST" (optional) allows for the identification of defect location information. ○ Maintenance service that enables rapid response in case of trouble by utilizing communication lines for remote connection. ○ Flexible system configuration tailored to the defects to be detected. For more details, please contact us or download the catalog.

Company：アイレック技建東日本営業本部第二事業部
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection device "Cup"

Detects defects such as printing defects, dirt, and scratches on the inside and outside surfaces of the cup.

We inspect abnormalities such as printing defects, dirt, and scratches on the inside and outside surfaces of cups using a specialized imaging system with special lighting and line sensor cameras, along with our unique grayscale image pattern matching. 【Features】 - High-speed, high-precision inspection with line sensor cameras - Can be installed on existing printing machines For more details, please contact us or download the catalog.

Company：アイレック技建東日本営業本部第二事業部
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection device "Bottle"

Inspection is performed using an imaging system and a unique grayscale image pattern matching.

We inspect printing defects and appearance abnormalities on bottles with surface printing using a imaging system with special lighting and line sensor cameras, along with our unique grayscale image pattern matching. 【Features】 ○ High-speed and high-precision inspection with line sensor cameras ○ Can be installed on existing printing machines For more details, please contact us or download the catalog.

Company：アイレック技建東日本営業本部第二事業部
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection device "web-type printed matter"

We inspect the appearance of web-printed materials quickly and continuously.

The independently developed image processing device automatically follows the transport speed, enabling high-speed inspection. By using multiple registrations of reference images, inspections that allow for variation in good products are achieved. The patented "Line Block Position Correction" function enables high-precision inspections. It is equipped with a dedicated algorithm for detecting missing characters. 【Features】 ○ The inspection analysis system "VST" (optional) allows for the identification of the location of defects. ○ Remote connection via communication lines enables prompt response to issues during maintenance service. For more details, please contact us or download the catalog.

Company：アイレック技建東日本営業本部第二事業部
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Application Case Studies for Defect Inspection Points Made Easy

Understand the defect judgment points for food packaging, containers, and various parts! Collection of application examples for automatic visual inspection [Free distribution available].

Our company started with LCD and semiconductor inspection and has refined its unique defect detection technology. Unlike generic image processing, we have focused on high-level defect detection technology and have recently expanded our areas of application to include food (packaging defects), automotive (metal surface appearance), glass and plastic containers (foreign substances), among others. We have introduced our equipment to over 300 customers. Currently, we are offering a free collection of application examples for automated visual inspection that utilizes the defect detection technology we have developed so far. This reference material provides insights into defect judgment points for food packaging, containers, and various parts. If you are interested, please download the materials from the link below.

Company：エム・アイ・エル
Price：Other

Defect Inspection Equipment
Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rationalization and automation solution (appearance inspection, measurement inspection, labor reduction)

We provide fine and high-precision manufacturing processes and inspection processes, along with automation and labor-saving solutions!

We develop processing machines tailored to the needs of manufacturing processes, handling everything from development and design to production in-house, providing high-value-added rationalization devices. We have various experiences in manual tooling, semi-automation, and automating visual inspections. Our secondary processing NC lathe, which enables the machining of complex-shaped parts, achieves rationalization through customizable designs that allow for pallet supply and sampling depending on the application. Additionally, we have equipped our machines with precision measuring instruments, enabling product measurement before and after processing. For rationalization, automation, quality improvement, and alleviating labor shortages. If you have any concerns, please feel free to consult with us. We contribute to visual inspection, high-precision inspection, automation solutions, inline verification, compatibility with diverse materials, easy operation, high reliability, cost reduction, customization, compact design, and have numerous achievements.

Company：Citizen Finedevice Co.,Ltd
Price：Other

Other FA equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hox Equipment Introduction

"A good site is the best salesman." We aim to create a factory that impresses our customers.

We take pride in being able to meet a variety of requests, as we have equipped ourselves with a diverse range of facilities.

Company：ホックス
Price：Other

Other electronic parts
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Appearance inspection device

Easy for anyone with AI integration! This one device for various inspections, on your production line.

1. Wide Range of Inspection Items You can utilize various inspections such as checking for printing/engraving, foreign matter contamination, dirt, scratches, and the presence of parts. A single unit can achieve many inspection items, contributing to quality improvement and productivity. 2. Flexible Customization Using the "learning function" of the appearance inspection system, customers can add inspection items. It is effective in production sites with small lots and diverse products. Additionally, we can develop and customize the necessary functions for our customers. 3. High Cost Performance & Space Saving We have reduced initial costs to make it easy to implement at an affordable price. Why not automate the inspection process in your production site? The space-saving design allows for additional installation on existing equipment.

Company：TMCシステム本社ビル
Price：Other

Image Processing Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AI Image Inspection Case] Inspection of Disc-Shaped Rubber Parts

We will inspect the rubber parts on the milky white disc!

We received an inquiry regarding the appearance inspection of rubber parts on a milky white disc. There is a desire to build a low-cost system to detect foreign objects, burrs, and bubbles. Since sending samples is not possible, images were provided instead. The product size has an outer diameter of Φ7.6 and a height of 0.9, with a shape that has protrusions on both sides in the center. The detection levels being considered are for foreign objects of size 0.05 square millimeters, burrs of size 0.2 square millimeters, and bubbles of size 0.3 square millimeters. As a preliminary evaluation service, we checked what would happen if we placed the item on a base as part of the operational method being considered. With top-side lighting, the surface did not appear to be transparent, and upon applying image processing, it seemed capable of detecting debris adhered to the surface. We will proceed to a test (feasibility verification) to confirm whether actual defects such as foreign objects can be detected under these conditions, assuming real operational scenarios. This time, we are setting it up using the "Scratch Inspection" feature of EasyInspector.

Company：スカイロジック
Price：Other

Visual Inspection Equipment
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AI Image Inspection Case] Measurement of Metal Parts Dimensions (2)

Detect the dimensions of flat-shaped metal parts with AI image inspection software!

This is the first inquiry from a specialized trading company dealing with aircraft and space equipment. The content was about searching for simple inspection equipment (including software). They seemed to be interested in our products for conducting shape inspections of relatively flat components, approximately 40 cm square. We are also able to accommodate inspection verification and demo units, and we have sent detailed materials as well. 【Inspection Setup and Results】 We conducted measurements on five types of samples that we received. By imaging the edges of the components with transmitted lighting and using the "Dimension Angle Inspection" function of EasyInspector, we were able to perform the inspections. The dimensions were converted based on the dimensions of the good products. The samples we have are typically discarded after two weeks. If you wish to have them returned, we kindly ask that you contact us by phone or email within one week after the report is sent.

Company：スカイロジック
Price：Other

Image Processing Software
Visual inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Visual inspection equipment Product List and Ranking from 72 Manufacturers, Suppliers and Companies | IPROS GMS

Visual inspection equipment Manufacturer, Suppliers and Company Rankings

Visual inspection equipment Product ranking