日本ビジネスロジスティクス（JBL） List of Products and Services

The international standard equivalent to JIS Z 0200 "Packaging of Goods - General Test Methods" which serves as the standard for transportation packaging in our country is ISO 4180, and it is one of the widely adopted transportation testing standards around the world, similar to ASTM and ISTA standards. The testing content and conditions of this standard were significantly revised for the first time in approximately 10 years since 2009, and it was published as the 2019 edition. ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us using the 'Contact Us' section below.

Due to the change from the Medical Devices Directive (MDD) to the Medical Devices Regulation (MDR), ISO 11607:2019 has made packaging validation a clear requirement. As a result of this change, integrity testing of sterile barrier systems must be conducted after performance testing of the packaging system and after stability testing. Our service provides a one-stop solution for all necessary tests, from transportation packaging testing to integrity testing of sterile barrier systems and stability testing. This allows you to be freed from the cumbersome ancillary tasks and complicated communications related to inter-site transportation, enabling rapid packaging validation. ▼ For more details, please download the PDF document (recommended). ▼ If you need assistance urgently, please contact us through the 'Inquiry' section below.

Regarding the packaging and transportation of medical devices that enter the body (such as scalpels, catheters, syringes, etc.), it is necessary to demonstrate that they are sterile until the packaging is opened in the operating room or similar settings (ISO 11607:2019) and to submit and present test reports from a third-party organization. Therefore, when packaging and transporting medical devices, it is essential to conduct ISO 11607:2019 certification testing externally and obtain the test reports. Are you facing any of the following issues regarding ISO 11607 certification testing? - I want to obtain ISO 11607 certification, but I don't know what to do. - I was turned down for ISO 11607 certification testing and don't know where to request it. Based on our track record of over 300 validations of medical device packaging annually, we conduct performance testing of packaging systems in accordance with the testing methods described in Annex B Performance Testing of ISO 11607:2019. We provide a one-stop service from test plan development to test execution and report preparation, so please feel free to contact us for consultation. *For more details, please check the materials available for download in PDF format.

Due to the change from the Medical Device Directive (MDD) to the Medical Device Regulation (MDR), packaging validation has become a clear requirement in ISO 11607:2019. As a result of this change, integrity testing of sterile barrier systems must be conducted after performance testing of the packaging system and after stability testing. Additionally, devices shipped in a sterile state must guarantee that they are in a sterile condition when they reach the market and must maintain sterility under the transportation and storage conditions specified by the manufacturer until they are opened at the time of use, unless the packaging is damaged. Our service will conduct integrity testing of medical device packaging in accordance with the testing methods described in Annex B of ISO 11607:2019. ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us through the 'Contact Us' section below.

Stability testing is necessary for products whose quality is difficult to ensure without specific storage methods or that may deteriorate over time, according to the guidelines issued by the Ministry of Health, Labour and Welfare, which require stability testing to establish storage methods and shelf life. Our service will conduct accelerated degradation testing (ASTM F1980) in accordance with the standard guide for accelerated degradation of sterilized medical device packaging as described in Annex B of ISO 11607-1:2019. ▼ For more details, please download the PDF document (recommended). ▼ For urgent inquiries, please contact us using the 'Contact Us' section below.

Our company conducts corner drop tests on pallets in accordance with the testing methods specified in ISO 8611. This test is similar to the JIS standard tests, where the same corner of the pallet is dropped three times from a height of 50 mm, after which the diagonal length of the pallet is measured to check for changes in rate. While the JIS Z 0602 pallet tests only specify four test items, ISO 8611 is broadly categorized into the following three groups, each with further subdivided test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF document.

Our company conducts fork lifting tests on the pallets listed below in accordance with the testing methods specified in ISO 8611. This test simulates the scenario of lifting single-faced pallets or single-use pallets with full-entry openings using a fork. While the JIS Z 0602 pallet tests only specify four test items, ISO 8611 categorizes them into the following three main groups, each of which is further subdivided into specific test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF.

Our company conducts compression tests for the legs of the pallets listed below in accordance with the testing methods specified in ISO 8611. This test is similar to the JIS test, but there are slight differences, such as the size of the material used for top compression. Additionally, while the JIS Z 0602 pallet tests only specify four test items, ISO 8611 categorizes them into the following three main groups, with each group further subdivided into specific test items. 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF materials.

Our company conducts shear impact tests on pallets in accordance with the testing methods specified in ISO 8611. This test examines the resistance of the top and bottom deck boards, which are joined to the beams and blocks, when subjected to opposing impact forces (shear impact forces). While the JIS Z 0602 pallet tests only specify four test items, ISO 8611 categorizes them into the following three main groups, with each group further subdivided into specific test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF document.

Our company conducts stacking tests for pallets in accordance with the testing methods specified in ISO 8611. This test is designed to assess the effects of loads applied to the span of the top and bottom deck boards of pallets that are stored in a stacked configuration. While the JIS Z 0602 pallet testing only specifies four test items, ISO 8611 is broadly categorized into the following three groups, each with further subdivisions of test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF materials (recommended).

Our company conducts bottom deck bending tests on the pallets listed below in accordance with the testing methods specified in ISO 8611. This test is similar to the JIS test, where a concentrated load is applied at the center span of the bottom deck board; however, the shape of the compression material differs slightly from the JIS standards. Additionally, while the JIS Z 0602 pallet test specifies only four test items, ISO 8611 is broadly categorized into the following three groups, each with further subdivided test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.)

Our company conducts bending strength tests on pallets in accordance with the testing methods specified in ISO 8611. This test is similar to the bending test in JIS, but the pallet support methods and overload conditions differ from those in JIS. Additionally, while the JIS Z 0602 pallet test specifies only four test items, ISO 8611 is broadly categorized into the following three items, each of which is further subdivided into specific test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF materials (recommended).

The vibration test for medical pen-type injectors according to ISO 11608-1:2012 is a vibration test defined by the requirements and testing methods. As a pre-treatment for the vibration of the pen-type injector, the injector, equipped with a cartridge and a dedicated injection needle, is subjected to vibrations in each direction of the three axes under JIS C 60068-2-6 and the following conditions. ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us using the 'Contact Us' section below.

Our company flexibly responds to various tests tailored to our customers' transportation modes, including tests assuming transportation by truck, aircraft, and ship, compression tests assuming stacking in warehouses, and tests related to sterilized medical device packaging. We provide consistent support from the planning of test programs to the execution of tests and the preparation of reports, and we also accommodate tests in accordance with the revised "JIS Z 0200" standard, which was amended in January 2023. Currently, we are offering a "Packaging Evaluation Test Case Collection" that includes our expertise in conducting over 800 transportation packaging tests annually and information on tests based on the revised "JIS Z 0200." [Contents (excerpt)] ■ Details of standard tests such as ASTM, ISO, ISTA, and JIS ■ Important points to consider in packaging design before testing ■ Overview of packaging validation services (stability tests, accelerated degradation tests, etc.) ■ Overview of temperature simulation tests for insulated containers *For more details, please refer to the materials available for download in PDF format. If you need immediate assistance, please contact us using the 'Contact Us' section below.

Our company flexibly responds to various tests tailored to our customers' transportation modes, including tests assuming transport by truck, aircraft, and ship, compression tests assuming stacking in warehouses, and tests related to sterilized medical device packaging. We provide consistent support from test planning to execution and report preparation, and we also accommodate tests in accordance with the revised "JIS Z 0200" standard, which was amended in January 2023. Currently, we are offering a "Packaging Evaluation Test Case Collection" that includes our know-how from conducting over 800 transportation packaging tests annually, as well as test information based on the revised "JIS Z 0200." [Contents (excerpt)] - Details of standard tests such as ASTM, ISO, ISTA, and JIS - Key points to consider in packaging design before testing - Overview of packaging validation services (stability tests, accelerated degradation tests, etc.) - Overview of temperature simulation tests for insulated containers *For more details, please refer to the materials available for "PDF Download." If you need immediate assistance, please contact us through the "Contact Us" section below.

This document introduces the basic knowledge of packaging testing. It provides a detailed explanation of the fundamental roles, causes of packaging cargo accidents, and packaging tests using images and graphs. Feel free to download it if you are interested. [Contents] ■ About packaging ■ The necessity and role of packaging ■ Hazard factors in the distribution process ■ Transportation packaging testing standards (general testing methods) ■ Main types and purposes of packaging tests *For more details, please download the PDF or feel free to contact us.

When reflecting on the logistics environment from some time ago, it seems that there was a relatively high volume of transportation of large packaged goods through business-to-business (B to B) transactions. However, with the recent proliferation of the internet leading to transactions between companies and individual consumers (B to C) through online shopping and e-commerce sites, as well as the expansion of transactions between individual consumers (C to C) via flea market apps and auction sites, the logistics environment has undergone significant changes, including a rapid increase in small parcel mixed cargo. In addition to receiving products packaged in cardboard boxes, it is likely that opportunities to package and ship products yourself have also increased. Many of you may have had the experience of carefully protecting and packaging a product to ensure it does not break, and feeling relieved when it arrives safely. *For more detailed information, please refer to the attached PDF document. If you have any questions, feel free to contact us.*

The protection of contents plays an important role in preventing damage to products during transportation. In addition to protecting products and goods from damage caused by drops and vibrations during transport, handling, and storage, it also includes protection from heat, humidity, and odors. Moreover, it serves to protect products from not only physical factors but also human factors such as vandalism, chemical factors like oxidation and corrosion, and biological factors such as insects and bacteria. *For more detailed information, please refer to the attached PDF document. Feel free to contact us for further inquiries.*

The "Guidebook on Basic Knowledge of Packaging Testing" is a comprehensive guide that consolidates important information regarding distribution and packaging testing, including hazard factors encountered during the distribution process. It clearly explains the necessity and role of packaging, as well as the types of damage in domestic transport cargo, using graphs and tables for better understanding. If you are interested, please feel free to download it. 【Contents (excerpt)】 1. What is "packaging"? 2. The necessity and role of packaging 3. Hazard factors in the distribution process (risk factors) 4. What is "packaging testing"? 5. Main types and purposes of packaging testing

There are not a few cases where damage occurs during the distribution process of packaged goods until they arrive at their destination. Among the damages to transported goods within Japan, a significant portion, accounting for 77%, is caused by dynamic stress believed to result from substantial external forces applied to packaged goods, such as "breakage, bending, denting, and deformation." To reduce the risk of damage to packaging and products during the general distribution process (both domestic and international) and to improve product reliability, it is important to conduct packaging tests in advance to confirm the appropriateness of packaging specifications and the strength of the products themselves. *For detailed information, please refer to the attached PDF document. For more information, feel free to contact us.*

Packaging testing refers to the evaluation of the durability of products and packaged goods against physical impacts such as drop shocks, vibrations, and compression from stacking, as well as changes in temperature, humidity, and atmospheric pressure during the distribution process (transportation). It is conducted to verify product quality in advance and to prevent damage during actual transportation. Since it can assess the strength and durability of packaging necessary to protect products during transport, it is used in many industries. Packaging testing comprehensively applies transportation load stresses such as "drop shocks," "vibrations," and "compression" that are encountered in the series of transport environments from shipment to delivery, in order to confirm the appropriateness of packaging specifications and the protective nature of the products. It is generally conducted in accordance with official packaging testing standards. *For detailed information, please refer to the attached PDF document. For further inquiries, please feel free to contact us.*

We would like to introduce the transport packaging testing standards (general principles of testing methods). There are various transport testing standards widely adopted around the world, similar to ASTM and ISTA standards, such as "ISO 4180 Packaging Cargo - General Principles of Performance Testing Methods" and "JIS Z0200 Packaging Cargo - General Principles of Performance Testing Methods," which specify testing methods for packaging materials. We recommend understanding the specified test items and test conditions, and selecting testing standards that can achieve comparable load conditions in light of your company's transport environment. 【Transport Packaging Testing Standards】 ■ ASTM D4169・ASTM D7386 General Principles of Testing Methods ■ ISTA Standards ■ ISO 11607-1 ■ ISO 4180 Packaging Cargo - General Principles of Performance Testing Methods ■ JIS Z0200 Packaging Cargo - General Principles of Performance Testing Methods ■ MIL-STD-810 *For more details, please download the PDF or feel free to contact us.

We would like to introduce the main types and purposes of packaging tests. There is the "drop test" to evaluate the durability of packaging against impact, the "vibration test" to assess the effects of vibrations during transportation on products and packaging, the "compression test" to evaluate durability against compressive forces, and the "temperature and humidity test" to assess how well packaging materials and products can withstand changes in temperature and humidity. Please feel free to contact us when you need our services. 【Types of Packaging Tests】 ■ Drop Test ■ Vibration Test ■ Compression Test ■ Temperature and Humidity Test *For more details, please download the PDF or feel free to contact us.