日本ビジネスロジスティクス（JBL） List of Products and Services

Overview of JIS C 60068-2-27 (IEC 60068-2-27): - JIS C 60068-2-27 (IEC 60068-2-27) specifies the testing methods for components, equipment, and other electrical products that are subjected to relatively infrequent and non-repetitive shocks, or repetitive shocks during transportation, storage, handling, or use. By equipping with the elastomers we possess, the following shock tests are possible: Shock Pulse: Half sine wave Peak Acceleration Duration 1. 150 G 6 msec 2. 100 G 6 msec 3. 100 G 11 msec 4. 50 G 11 msec 5. 50 G 18 msec 6. 30 G 18 msec ▼ For more details, please download the PDF document (recommended). ▼ For urgent inquiries, please contact us using the 'Contact Us' section below.

If you are considering product evaluation tests based on IEC 60068-2-64 (JIS C 60068-2-64) wideband random vibration tests, as well as product evaluation tests in packaged condition, please contact us for more details at the information below. Additionally, Japan Business Logistics (hereinafter referred to as JBL) has a well-balanced array of various packaging test facilities, including vibration, drop, shock, compression, decompression, and temperature and humidity tests, and conducts evaluation tests based on official testing standards such as JIS, ISO, ASTM, ISTA, and IEC. For inquiries or consultations regarding packaging and product testing, please contact us at the phone number below. ▼ For more details, please download the PDF document (recommended). ▼ If you are in a hurry, please contact us through the 'Contact Us' section below.

This testing machine is primarily capable of conducting shock tests on small electronic components and similar items. The tests can accommodate sine half waves, trapezoidal waves, sawtooth waves, etc. (in our case, only sine waves), and comply with IEC standards, JIS standards, MIL standards, JEITA (EIAJ) standards, and other internal standards. Depending on the duration of action, the applicable shock range is from 10 to 3,000G. In our case, using a shock amplifier, it can accommodate up to 30,000G. Additionally, this testing machine can easily reproduce a wide range of test conditions (shock acceleration / duration of action) using a pneumatic method. 【Testing Standards】 - JIS C 60068-2-27 - IEC 60068-2-27 - MIL-STD-202 - MIL-STD-810 - MIL-STD-883 - EIAJ ED-4701/400 and others ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us via the 'Contact Us' section below.

1. Overview of JIS C 60068-2-30 Test: - JIS C 60068-2-30 is a testing method to determine the suitability of test specimens for use, transport, or storage under conditions where condensation occurs on the surface of components, devices, or other products due to repeated temperature changes in a high humidity environment. - For small or low-volume test specimens, this testing procedure may result in less likelihood of condensation on the surface of the test specimen. In such cases, it is advisable to use another testing standard, such as JIS C 60068-2-38. - This test involves conducting one or more temperature and humidity cycles while maintaining a high relative humidity state. ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us via the 'Contact Us' section below.

Overview of JIS C 60068-2-31 (Drop Test and Tip Test): - This standard is a Japanese Industrial Standard created based on the IEC 60068-2-31 issued in its second edition in 2008, without changing its technical content or structure. - This standard specifies test methods to reproduce the effects on equipment and its accessory units (hereinafter referred to as "equipment, etc.") caused by impacts, sudden jolts, and drops that may occur due to rough handling during use or repair work. - This test method is recommended to be applied only to equipment, etc., that are prone to rough handling, typically ranging from small to medium sizes, as specified in their product standards, and it is desirable to apply it only to the surfaces and edges of such equipment, etc., that are at risk of such handling. ▼ For more details, please download the PDF document (recommended). ▼ If you are in a hurry, please contact us through the 'Contact Us' section below.

1. Overview of JIS C 60068-2-38 Test: - JIS C 60068-2-38 specifies a temperature and humidity combination (cycle) test method that primarily accelerates the degradation of electrical and electronic components under high temperature and high humidity as well as low temperature conditions. The aim is to induce defects in the test samples through respiration rather than moisture absorption. - This test differs from other temperature and humidity cycle tests by intensifying the rigor of the test as follows: ◇ A high number of temperature fluctuations within the specified time ◇ A wide range of temperature changes ◇ A rapid rate of temperature change ◇ Inclusion of temperature cycles below 0 degrees ▼ For more details, please download the PDF document (recommended). ▼ For urgent inquiries, please contact us using the 'Contact Us' section below.

- JIS C60068-2-64 is a Japanese Industrial Standard created based on IEC 60068-2-64 without changing its technical content or structure. - This vibration testing standard primarily targets electrical or electronic products (though it is not limited to just electrical or electronic products) and is applicable to test specimens subjected to random vibrations occurring in transportation environments or usage conditions such as in the aerospace field or ground vehicles. ▼ For more details, please download the PDF document. (Recommended) ▼ If you need assistance urgently, please contact us through the 'Contact Us' section below.

Overview of JIS C 60068-3-4 (High Temperature and High Humidity Test): - The purpose of the humidity test is to determine the ability of electrical and electronic products to withstand high relative humidity weather conditions, regardless of the presence of condensation, as well as to evaluate the corrosion resistance of the test samples against certain types of corrosive effects. - Our company conducts environmental testing (high temperature and high humidity tests, temperature and humidity cycle tests, high temperature storage tests, low temperature storage tests) using a constant temperature and humidity testing machine. Since we can adjust not only the temperature but also the humidity, it is possible to conduct reliability tests under various temperature and humidity environments. ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us through the 'Contact Us' section below.

Our company flexibly responds to various tests tailored to our customers' transportation modes, including tests assuming transportation by truck, aircraft, and ship, compression tests assuming stacking in warehouses, and tests related to sterilized medical device packaging. We provide consistent support from the planning of test programs to the execution of tests and the preparation of reports, and we also accommodate tests in accordance with the revised "JIS Z 0200" standard, which was amended in January 2023. Currently, we are offering a "Packaging Evaluation Test Case Collection" that includes our expertise in conducting over 800 transportation packaging tests annually and information on tests based on the revised "JIS Z 0200." [Contents (excerpt)] ■ Details of standard tests such as ASTM, ISO, ISTA, and JIS ■ Important points to consider in packaging design before testing ■ Overview of packaging validation services (stability tests, accelerated degradation tests, etc.) ■ Overview of temperature simulation tests for insulated containers *For more details, please refer to the materials available for download in PDF format. If you need immediate assistance, please contact us using the 'Contact Us' section below.

Our company flexibly responds to various tests tailored to our customers' transportation modes, including tests assuming transport by truck, aircraft, and ship, compression tests assuming stacking in warehouses, and tests related to sterilized medical device packaging. We provide consistent support from test planning to execution and report preparation, and we also accommodate tests in accordance with the revised "JIS Z 0200" standard, which was amended in January 2023. Currently, we are offering a "Packaging Evaluation Test Case Collection" that includes our know-how from conducting over 800 transportation packaging tests annually, as well as test information based on the revised "JIS Z 0200." [Contents (excerpt)] - Details of standard tests such as ASTM, ISO, ISTA, and JIS - Key points to consider in packaging design before testing - Overview of packaging validation services (stability tests, accelerated degradation tests, etc.) - Overview of temperature simulation tests for insulated containers *For more details, please refer to the materials available for "PDF Download." If you need immediate assistance, please contact us through the "Contact Us" section below.