See Testing Equipment and Devices's detailed category ranking
Leakage of the package and seal strength testing can be measured with a single device!
You can see whether the measured object operates within the product specifications or if it breaks.
Explaining the key points for selecting tests, including the content of leak tests that you can't ask about now and the judgment points regarding material influence!
Based on the content of ISO 4180, this is a testing method for evaluating the packaging of packaged goods against vibrations, drop impacts, and compression during the distribution process.
Configuration with an ultrasonic flaw detector and data processing computer! Setting of inspection conditions, saving results, and reading them is possible.
A wind pressure testing device expected to be utilized in environmental testing of new materials such as perovskite solar cells.
The selection will be made with reference to the general provisions of JIS Z 0200 regarding test levels and vibration duration.
It is a compact design and easy-to-use high-quality brake test kit.
A versatile air leak tester that can flexibly adapt to various measurement environments. It is Fukuda's flagship model.
Over 2000 units sold! Measuring the adhesion strength of wires and crimp terminals.
Dedicated test equipment that integrates contact action recording, current waveform recording, and a variable power supply.
The transport test can accommodate almost all test schedules specified in the ASTM D 4169 evaluation test method general rules.
The required amount is 10ml! Determine the ratio of the saturated fraction, aromatic fraction, resin fraction, and asphaltene fraction.
Data can be transferred to the PC via USB! The peeling angle is constant, so the measurement data is reproducible.
High and low temperature circulating constant temperature bath
Simple diagnosis confirmation! Have you forgotten that toilets can also be affected when a disaster occurs?
The measuring device can be precisely adjusted at a standard acceleration of 10 m/s² (load mass from 0 grams to 70 grams).
Traceable digital pressure gauges covering a wide range. Proven world-class high reliability.
Engine cylinder pressure measurement! No need for measurement hole processing!
It is also possible to capture the behavior of the product and the deformation of the cushioning packaging in as little as 1/2000 of a second for visual confirmation through video.
Applicable for spring water pressure testing! It can be attached to the water level measurement pipe, allowing for the valve to be instantaneously opened at the start of the test.
Camera-based testing that allows for easy direct injection of image data into the ECU! It can be used for quick image processing and algorithm verification, as well as for testing actual cameras.
If you have any issues with Proceq products such as the Schmidt hammer, Echo chip series, or Profometer, please consult us!
Intelligent interface! Supporting customers who produce a large number of samples!
We will introduce the amendments from the previous edition regarding the automotive parts immunity test standard: ISO 11452-9 (2021), published in October 2021.
A self-weight scale tester that allows for easy performance inspection and adjustment of self-weight scale meters!
It produces the highest quality ultrapure water, which was difficult to achieve with conventional lab and analytical ultrapure water production systems.
Dye penetrant testing agent that allows for visual inspection of invisible fine scratches.
Solve issues related to PT testing in rainy weather and improve testing accuracy! Penetrant testing agents that can be used even in the rain.
Dye penetrant testing agent for inspecting fine surface opening defects that cannot be detected by the naked eye.
[Transport Test] A series of packaging tests will be conducted in accordance with the test sequence specified in ISTA 3A.
The MK3 uses an electronically controlled direct drive engine, and it is a test machine that can maintain speed accurately.
The catalog has been updated! Compliant with 【JIS Z 2241】. Hydraulic universal testing machine 'AY-S6/D6' or 'YU-S6/D6' series.
High-performance series with inverter control adopted!
The long-awaited ultrasonic flaw detector has evolved and is back!
A cutter developed in pursuit of the ideal as a punching blade for specimen preparation, featuring a replaceable blade system.
Comprehensive analysis items related to texture! We can quantify and measure factors such as chewiness, "crispiness," and the dissolvability of seaweed.
The direct circulation method maximally suppresses heat loss! Achieving testing with a stable temperature distribution.
It counts particles in gas in real time while simultaneously performing particle size classification. It is a continuously monitored measurement system that can be customized according to specific purposes and applications.
A wide range of leak testers and leak test-related products are available! We will propose leak inspection and leak testing tailored to your measurement environment and product environment.
The all-in-one flow tester "FMZ-1063" has greatly improved operability, visibility, and measurement accuracy compared to conventional flow meters.
Easily rent a large high-temperature and high-humidity room for anywhere from 1 hour to several months!
Equipped with advanced analysis functions! Stable measurements are possible even in environments with high vibrations.
Automatic control of sample injection, measurement, discharge, cleaning, and calculation via PC is possible!!
Reproducing paint scratches caused by flying stones.
Quick and easy calibration checks of field measuring instruments commonly used in electrical work and electrical equipment maintenance.
Detailed explanation of the test overview of CISPR25 Ed.4 2016 (for automotive equipment).
Visualization of compressed air and gas leaks By visualizing leaks in compressed air and gas, gas leaks can be detected immediately.
Can't ask now! Explaining the differences between 'visual inspection for leaks' and 'inspection using a leak tester'! I will also explain the mechanism of air leak testing.
The ultrasonic testing machine Panzit Lab can measure not only propagation time but also propagation speed, measurement length, and crack depth.
Improvement of business efficiency! Display inspection results on the computer screen and save them as a CSV file on the computer!
Ideal for various evaluation tests in research and development of solar cells and artificial photosynthesis!
This is a device that performs the mixing of pigments and vehicles under specific conditions during the paint or ink formulation stage of testing.
To drive more safely and comfortably, we pursue a test environment that is as close to real driving conditions as possible!
Simplifying the grinding process! We provide robustness and stability with a durable die-cast body.
The target oil type is gasoline! Measuring the evaporation residue of fuel ethanol.
High precision with excellent linearity and good responsiveness. A laminar flow meter with low pressure loss and excellent reproducibility.
A high-sensitivity leak testing machine that uses hydrogen gas. It features improved convenience and operability, and is a compact detector equipped only with the necessary functions.
The conductivity of non-ferrous metals can be easily measured. The measurement features automatic calibration with temperature compensation.
High-precision constant temperature bath with hot air circulation covering a range up to 400°C.
This is a penetrant used for penetrant testing. It complies with JIS Z 2343-2 (ISO standard) and is used by many customers.
Highly functional digital pressure gauge with extensive functions to meet various specifications. RS-232C communication enables external control and data collection.
Equipped with an uninterruptible power supply, it continues exhaust operation for a certain period during a power outage.
Ultra-compact design! Convenient to carry and can be placed anywhere.
The Goettfert Melt Indexer mi series is a high-precision and user-friendly melt indexer that accommodates a wide range of samples.
This is a flat thermal bonding testing machine that allows for arbitrary settings of heat bonding conditions for heat sealing.
Automatically measures the wire fastening force of crimp terminals!
[Demo Available] Compact and lightweight, convenient for outdoor use and travel! Battery-powered field balancer for elastic rotors.
A detailed explanation of the IEC 61000-4-5 Ed.3 test standard with illustrations!
Test procedures, etc.! A detailed explanation of the IEC 61000-4-4 Ed.3 test standard with illustrations.
A detailed explanation of the test overview of ISO 7637-2 Ed.3 2011.
For verifying packaging design. Achieving accurate surface, edge, and corner drop tests. Compliant with JIS, ASTM, and other standards.
Achieving high reproducibility in shock testing. No foundation work is required, and installation is space-saving. Maximum 30,000G, action time 0.1 to 60 msec.
Multifunctional diagnostic tester compatible with the world standard ECU diagnostic standards ODX and OTX, based on various standard diagnostic protocols (such as UDS and OBD).
Inspection of finer scratches using fluorescence. We take pride in our high distinguishability.
Adopts high-output UV-LED (made in Japan). The special heat dissipation design enables fanless high ultraviolet illumination. There is no decrease in illumination between fixtures when connected.
[Transport Test] A series of packaging tests will be conducted in accordance with the test sequence specified in ISTA 2A.
We will conduct a series of packaging tests in accordance with the test sequence specified in ISO 4180 (General Methods for Evaluation Testing).
Leave it to JBL, which has numerous testing achievements for the industrial standard 'JIS E 4031' for railway vehicle equipment!
A printing suitability testing machine that can withstand harsh use in the production field.
Easily measure the adhesive strength of materials! Digital display adhesive peeling tester.
HRT I is a high-precision remote-controlled turntable. It allows for the rotation of the measurement target device to a specified angle, enabling direction-dependent acoustic measurements.
We offer custom-made motor testing equipment that meets various requirements such as motor shape, characteristics, temperature environment, and load conditions!
The evolved OmniScan series "OmniScan X4"