Analysis Product List and Ranking from 375 Manufacturers, Suppliers and Companies

Server room (data center) air conditioning analysis

Analyzing the effects of aisle capping in the server room!

In server rooms and data centers, there are many servers and IT equipment, and heat management is essential for their stable operation. As a countermeasure, the exhaust fans on the back of the server racks are positioned to face each other, creating a pathway (hereinafter referred to as the hot aisle) that primarily directs exhaust from the racks upward. Conversely, the intake sides at the front of the server racks are also positioned to face each other, creating a pathway (hereinafter referred to as the cold aisle) that primarily introduces cool air from the floor into the server racks. This arrangement allows for efficient exhaust. However, at the top of the server racks, there is a risk of drawing in high-temperature exhaust from the equipment (short-circuiting), so we considered countermeasures and conducted a comparison based on the presence or absence of a partition (hereinafter referred to as aisle capping) at the top of the cold aisle. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Thermo-fluid analysis
simulator
Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Entrance hall air conditioning analysis

During the basic design phase, an air conditioning analysis of the entrance hall was conducted.

The entrance hall targeted for analysis is a large space with a height of approximately 20 meters. During the basic design phase, it is crucial to verify whether there are any issues with the temperature distribution and airflow in the living area based on the position, number, wind speed, and temperature of the air conditioning air outlets. This is very important for considering comfort and energy efficiency. Additionally, it is necessary to take into account the variations in conditions due to the seasons. In this analysis, we detailed the internal space of the building, the arrangement of the air outlets and inlets, and the thermal load, conducting air conditioning analysis for summer, winter, and transitional periods. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Thermo-fluid analysis
simulator
Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis of airflow around the cooling tower

Reproducing the thermal flow conditions around a cooling tower with unknown characteristics and behavior!

Thermal fluid equipment related to building facilities often has many unknown characteristics and behaviors. Cooling towers are one such example, but by precisely setting the structure, flow conditions, and thermal conditions of each cell in the cooling tower, it is possible to reproduce the thermal fluid state quite accurately. In this analysis, we conducted a cooling tower thermal fluid analysis considering external winds to examine the impact of the airflow state around high-rise buildings and the arrangement of multiple cooling towers with different specifications on the temperature distribution of the heat released from each cell to the outside air. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Thermo-fluid analysis
simulator
Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rotary door ventilation analysis

We analyzed the ventilation characteristics of revolving doors, which are movable boundaries.

What are the ventilation characteristics of revolving doors? In revolving doors, where the opening area changes significantly over time, it is important to capture the temporal variation of the ventilation airflow. This analysis treats the revolving section as a moving object, aiming to gain insights into the circulation of air inside and outside. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Thermo-fluid analysis
simulator
Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis of airflow in the subway station when the train enters.

I analyzed the airflow in the subway station using the moving boundary problem.

It is known that there are significant speed and pressure fluctuations at the front and rear of vehicles running in narrow spaces such as tunnels and subway stations. In this analysis, we conducted simulations regarding the impact on the area around the platform (airflow, pressure) when a train passes, using the moving boundary problem. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Thermo-fluid analysis
simulator
Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Conditioning Analysis in an Electrical Components Factory

We conducted an air conditioning analysis using an electrical components factory with a clean room as an example.

The air conditioning analysis within an electrical components factory was conducted using a factory that has a clean room as an example. Unlike general architecture, where aesthetics (design) are emphasized, in facilities such as factories, functionality such as air conditioning performance and ventilation efficiency takes precedence over design. Even when achieving the same ventilation and air conditioning performance, there is often significant potential for cost reduction regarding the arrangement of ducts and outlets. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

simulator
Contract Analysis
Structural Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inclined apartment-style environmental analysis

Examining the difficult issues of a condominium built on a slope due to changes in the wind environment.

The purpose of wind environment analysis in sloped terrain is to examine some of the challenging issues that exist within wind environment analysis. Analyzing areas that include sloped and undulating terrain is one of these issues. The reason for this is that the differences in elevation between buildings and their foundations make it difficult to create analysis models. Another reason is the question of how to set the conditions for approaching wind on sloped terrain. As with analyses on flat land, a power-law distribution is generally used as the basis, but it is preferable to establish a distribution along the slope of the terrain. Furthermore, there is a need to set the height of the sky plane higher than in standard analyses. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Contract Analysis
Structural Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Moving Boundary: Analysis of Wind Pressure Acting on a Running Train

We analyzed the aerodynamic pressure acting on a moving train.

Moving Boundary: The analysis of wind pressure acting on a moving train was conducted using numerical simulations that take into account the moving boundary. There are concerns that strong winds, such as those caused by typhoons, can overturn moving trains. Therefore, understanding the wind pressure acting on a moving train is crucial. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

simulator
Contract Analysis
Structural Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis of the wind environment around the apartment complex.

An analysis of the summer and winter results was conducted for the apartment building located in the urban area.

The wind environment analysis around the condominium was conducted for condominium buildings located in urban areas, with results for summer (southwest wind) and winter (north wind). When constructing or expanding buildings in urban areas, the wind conditions within the site or surrounding area can change significantly. This is known as the wind environment (building wind) issue. Generally, an investigation is conducted on the changes in wind speed distribution caused by the presence of the planned building for all wind directions (8 or 16 directions), comparing it to the conditions before construction. For a simplified evaluation, analysis is conducted only for the prevailing winds of each season. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

simulator
Contract Analysis
Structural Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis of Wind Environment Around High-Rise Buildings

Investigating the changes in wind environment when high-rise buildings are constructed in areas with relatively open surroundings.

The analysis of the wind environment around high-rise buildings aims to investigate the degree of impact on the surrounding area, which inevitably increases. In urban areas, it is not uncommon for buildings over 100 meters in height to be constructed; however, in such cases, the impact on the wind environment (building wind) differs significantly compared to situations where relatively low-rise apartments are built in residential areas. For buildings exceeding 100 meters, the recirculation zones that appear on the approach (upwind) side and the wakes (downstream vortices) that occur behind them are naturally very large, resulting in a correspondingly significant impact on the surroundings. This analysis examined the changes in the wind environment when high-rise buildings are constructed in areas where the surrounding space is relatively open. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Contract Analysis
Structural Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal flow analysis in thermal storage tanks

Reproduction of ducts and structures within the thermal storage tank, thermal flow analysis regarding liquid flow velocity and temperature stratification.

The thermal flow analysis within the thermal storage tank reproduces the ducts and structures inside the tank and conducts thermal flow analysis regarding the flow velocity and temperature stratification of the liquid within the tank. When predicting the performance of the thermal storage tank, it is crucial to understand the temperature distribution changes of the fluid inside the tank. This characteristic is greatly influenced by the shape and flow velocity within the tank, which in turn affects the temperature stratification of the liquid in the thermal storage tank. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Other analyses
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal fluid analysis in continuous casting machine molds

Simulation experiment on the influence of the flow state of molten steel flowing into the mold from the immersion nozzle.

In the thermal fluid analysis of the continuous casting machine mold, we conducted a thermal fluid analysis related to the continuous casting equipment in steelmaking plants. We faithfully modeled the mold and immersion nozzle to reproduce the flow within the molten steel bath, which is extremely important for controlling the solidification shell thickness and reducing non-metallic inclusions, making it an essential requirement for high-speed casting equipment. In this analysis, we simulated the impact of the molten steel flowing from the immersion nozzle on the flow state within the mold, as shown in the diagram below. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Other analyses
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Moving Boundary: Flow Analysis in a Stirring Tank Due to Impeller Rotation

Visualization of the fluid behavior in the tank generated by the rotation of the impeller, accompanied by a moving boundary.

Moving Boundary: In the flow analysis of a mixing tank caused by the rotation of an impeller, we conducted a numerical simulation that visualizes the behavior of the fluid within the tank, incorporating moving boundaries. The mixing and blending of fluids in a mixing tank is one of the important processes in the chemical and bio fields. There are various types of blade shapes, and the goal is to sufficiently mix and blend the contents of the mixing tank. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Other analyses
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis of airflow and heat within electronic device enclosures

Ventilation analysis was conducted using numerical simulation within the electronic device enclosure.

In the thermal airflow analysis of electronic device enclosures, we conducted ventilation analysis through numerical simulations within the enclosures. With the improvement of technology, electronic components are increasingly shrinking, making thermal issues within the enclosures unavoidable. The placement of high-heat-generating components and ventilation parts such as fans can significantly affect the performance of the devices themselves. We conducted the analysis to gain insights into this. For more details, please download the catalog.

Company：環境シミュレーション
Price：Other

Other analyses
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Entrusted Analysis Service [Thermal Fluid Analysis]

We have expertise in thermal fluid analysis in the fields of architecture, civil engineering, machinery, and electronics. Please try our analysis level and cost performance!

We have been engaged in various thermal fluid analysis services for over a decade, working hard and brainstorming with many customers, accumulating a wealth of know-how, insights, and presentation skills. The contracted analysis we provide has many advantages, such as: - Usable even by users who cannot operate software. - Convenient when time is limited or when the volume of analysis work is large. - Results can be interpreted by beginners in reports and other documents. - Conducted by experts, ensuring no concerns about the accuracy of the results. We promise to further enhance the level of analysis through organic collaboration with our customers while shedding light on unknown phenomena through simulation and opening new horizons of knowledge. For more details, please contact us or download the catalog.

Company：環境シミュレーション
Price：Other

Analysis Services
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Apple Link Corporation's Contour Shape Error Analysis

This is different! Contour shape error analysis

Using Quick Vision's automatic tracing function, it is possible to capture the contour shape of the measurement work as point cloud data.

Company：アップルリンク
Price：Other

Processing Contract
Analysis

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural analysis for the design of mechanical structures.

This is a structural analysis CAE for the design of mechanical structures by TechnoSolver Corporation.

Design support based on the design and analysis methods of CFRP components cultivated through the design of space structures Structural analysis CAE for mechanical structures by TechnoSolver 【Features】 ○ Contracted structural analysis services ○ Technical consulting for structural analysis - To apply the structural analysis software NASTRAN to actual issues, we provide comprehensive support from the selection of analysis evaluation methods to the optimization of design. ○ Consulting for the introduction of structural analysis - We propose the most suitable analysis system for customers considering the introduction of structural analysis. - Engineer training ○ Technical consulting related to structural testing - We propose testing evaluation methods to verify the validity of design results. - Support for planning and drafting tests, analyzing and evaluating test data, and validating structural analysis models, as well as building the necessary technology. ● For more details, please download the catalog or contact us.

Company：テクノソルバ
Price：Other

Other analyses
Structural Analysis
Thermo-fluid analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[EMC] WM7000-TD Time Domain Analysis

Analyze intermittent noise, noise caused by frequency fluctuations such as SSC, and transient noise in both the frequency domain and the time domain.

While scanning with the EMC scanner, - Capture the "spectrogram data" obtained from the real-time spectrum analyzer at each measurement point. - The analysis software (viewer) demonstrates its power in analysis with animation display through the Play function. - Newly introduced as an option for the WM7000. - Analyze intermittent noise phenomena, frequency fluctuations, and transient noise in both frequency and time domains. - Available as an option for new purchases or as an addition to existing equipment. - The real-time spectrum analyzer is exclusively for Tektronix RSA600/500/300 series.

Company：森田テック
Price：Other

Switching Power Supply
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold flow analysis

We will check in advance the effects of product shape, resin characteristics, mold design, and molding conditions.

During product design, by evaluating moldability before mold design and improving design quality, we can reduce defects that occur in later processes and streamline the development process.

Company：恒徳アイデック
Price：Other

Injection Molding Machine
Thermo-fluid analysis
Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural analysis

Improvements in design quality, reduction in man-hours for prototyping and experimentation, and shortening of development periods can be expected.

By utilizing structural analysis, we can expect improvements in design quality regarding product strength, reductions in the man-hours for prototypes and experiments, and a shortening of the development period. Our company supports designers facing strength-related issues with products and components through our extensive expertise and analysis techniques.

Company：恒徳アイデック
Price：Other

Injection Molding Machine
Structural Analysis
Stress Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heideck Hendo

Providing the desired technology with expertise and know-how in resin! 【Analysis】

Hondoku Idec provides analysis technology with expertise and know-how in resin. 【Features】 ○ Structural Analysis By utilizing structural analysis, improvements in design quality regarding product strength, reduction of man-hours for prototypes and experiments, and shortening of development periods can be expected. ○ Resin Flow Analysis During product design, evaluating moldability before mold design enhances design quality, reduces defects that may occur in later processes, and streamlines the development process. ● For more details, please contact us or download the catalog.

Company：恒徳アイデック
Price：Other

3D CAD
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CFD (Computational Fluid Dynamics) thermal fluid analysis

Visualize fluid flow and temperature distribution! We will conduct analysis using Ansys Icepak to assist in your design.

In modeling for cooling targets, when designers repeat the process of design → prototyping → measurement through experiments → redesign → prototyping based on their experience, it leads to wasted time and costs. In short, CFD analysis is necessary to eliminate that waste. In CFD, as long as the input parameters are provided, calculations are performed automatically, allowing for the visualization of fluid flow and temperature distribution. Our company conducts analysis using Ansys Icepak to assist in the design process. *For more details, please refer to the PDF materials or feel free to contact us.*

Company：CMインダストリー
Price：Other

Thermo-fluid analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wet-type single-screw small extruder 'ME-110INV' <for laboratory and trial use>

Excellent sanitary properties and compact! Here is a proposal for a high-torque, low-speed single-screw extruder.

The "ME-110INV" is a compact extruder suitable for laboratory and trial use in the food, cosmetics, and pet food industries. In the 50Hz area of Eastern Japan, it operates at 16 revolutions per minute, while in the 60Hz area of Western Japan, it operates at 20 revolutions per minute. However, the rotation speed can be adjusted by the user from 12rpm (40Hz) to 23rpm (70Hz) according to the hardness of the material and the working speed. The nozzle die can be easily replaced according to the application, and the extruding screw section can be completely disassembled for cleaning. 【Features】 - Compact size, ideal for small-scale production in research and development (laboratory, food, cosmetics applications) - The nozzle die can be easily replaced according to the application (two standard sizes included) - The extruding screw section can be completely disassembled for cleaning - The rotation speed can be adjusted by the user from 12rpm (40Hz) to 23rpm (70Hz) *For more details, please refer to the related links or feel free to contact us.

Company：チヒロ東京営業所
Price：500,000 yen-1 million yen

Extrusion Machine
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Low Cost / Short Delivery Time] Contract Flow Analysis of Resin

Possible defect prediction and cause analysis during molding! Resin flow analysis that can reduce mold modification costs! [Expedited service available]

"Resin flow analysis" is a method for visualizing the flow of molten resin injected into the interior of a mold from an injection molding machine, which is difficult to confirm from the outside. By conducting flow analysis in advance, it becomes possible to predict defects during molding and analyze their causes. This can shorten the development period, reduce mold modification costs, and enable product design that does not rely on intuition or experience. 【Features】 ■ Shortens the development period ■ Reduces mold modification costs ■ Enables product design that does not rely on intuition or experience ■ Improves the quality of molded products *For more details, please refer to the PDF materials or feel free to contact us.

Company：フルヤ工業
Price：Other

Other analyses
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Failure analysis of power devices

We will identify and observe the defective areas of power devices such as diodes, MOS-FETs, and IGBTs.

We perform optimal preprocessing for power devices such as diodes, MOS FETs, and IGBTs of all sizes and shapes, and identify and observe defective areas through backside IR-OBIRCH analysis and backside emission analysis. ■ Preprocessing for analysis - Backside polishing - We accommodate various sample forms. Si chip size: 200um to 15mm square ■ Defective area identification - Backside IR-OBIRCH analysis and backside emission analysis - IR-OBIRCH analysis: Supports up to 100mA/10V and 100uA/25V Emission analysis: Supports up to 2kV * We address a wide range of defect characteristics such as low-resistance shorts, micro leaks, and high voltage breakdown failures. ■ Pinpoint cross-sectional observation of leak areas - SEM/TEM - We select SEM or TEM observation based on the predicted defects and can conduct physical observation and elemental analysis of leak defect areas with precision.

Company：アイテス
Price：Other

Contract Analysis
Transistor
Analytical Equipment and Devices
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis of semiconductor diffusion layers using sMIM

Detect changes in concentration as changes in C! The dC/dV signal can also be obtained, which is effective for analyzing the diffusion layer.

At Aites Co., Ltd., we conduct analysis of semiconductor diffusion layers using sMIM. The Scanning Microwave Impedance Microscopy (sMIM) features a signal that has a linear correlation with dopant concentration. sMIM scans the sample by irradiating microwaves from the tip of a metal probe attached to an SPM and measures the reflected waves to obtain sMIM-C images that have a linear correlation with the concentration of the diffusion layer. The C component of Zs obtained from reflectivity consists of oxide film capacitance and depletion layer capacitance, and by utilizing the fact that the depletion layer width changes depending on impurity concentration, we detect changes in concentration as changes in C. [Application Examples] ■ sMIM-C: Visualization of diffusion layers and semi-quantitative evaluation of dopant concentration for various semiconductor devices such as Si, SiC, GaN, InP, GaAs, etc. ■ dC/dV: Evaluation of diffusion layer shape, determination of p/n polarity, visualization of depletion layers. *For more details, please refer to the PDF materials or feel free to contact us.

Company：アイテス
Price：Other

Contract Analysis
Other contract services
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crystal analysis of Cu using the EBSD method.

Observe the changes before and after compression on the copper plate! You can compare the half-life of the crystal grain size before and after compression.

The EBSD (Electron Backscatter Diffraction) method obtains orientation information of individual crystals from the electron diffraction patterns generated by electron beam irradiation and maps this information. Furthermore, it is a technique for investigating not only crystal orientation (texture) but also material microstructural states such as grain distribution and stress-strain as quantitative and statistical data. In the observation of changes before and after compression of a copper plate, IQ maps, GROD maps, and IPF maps (in the Axis 3 direction) can be used to compare the halving of crystal grain size before and after compression. 【Features】 ■ Obtains and maps orientation information of individual crystals ■ Investigates material microstructural states such as crystal orientation, grain distribution, and stress-strain *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Analytical Equipment and Devices
Analysis Services
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Backside light emission analysis of SiC devices

Pre-processing of SiC devices → Identification of leakage points → Physical analysis/component analysis handled seamlessly!

Our company conducts "Backside Emission Analysis of SiC Devices." SiC is a power device with less energy loss compared to conventional Si semiconductors and is attracting attention. However, due to its different physical properties from Si semiconductors, new methods are required for failure analysis. In a case study of backside emission analysis of SiC MOSFETs, an overseas SiC MOSFET was subjected to ESD, creating a G-(D,S) leakage, and numerous emissions indicating the leakage points were detected through emission analysis. When the emission points were observed using TEM, destruction of the SiO2 film and damage to the SiC crystal were noted. *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Analysis Services
Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

EBSD analysis of flexible printed circuits (FPC)

We will introduce EBSD analysis that reveals areas where distortion has accumulated in the wiring of the bending section!

We will introduce the EBSD analysis of flexible printed circuits (FPC). For flexible circuits used in products with movable parts and bending mechanisms, we conducted an EBSD analysis to check for differences in the Cu wiring between the bending section and the fixed section. As a result, while no significant abnormalities or differences were observed in the optical images of the wiring in the bending and fixed sections, the EBSD analysis revealed areas where strain is accumulated in the wiring of the bending section and areas where low-angle grain boundaries are concentrated. [Analysis Content] ■Appearance of the flexible circuit and optical images of Cu wiring - Appearance of the flexible circuit - Wiring in the bending section - Wiring in the fixed section ■Comparison of Cu wiring in the bending section and fixed section using EBSD - Wiring in the bending section - Wiring in the fixed section *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Analysis Services
Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LED failure analysis

Applying advanced sample preparation techniques and failure analysis equipment for semiconductors! Investigating the causes of non-lighting and brightness degradation.

In our "LED Failure Analysis," we conduct failure analysis of LEDs using advanced sample preparation techniques and semiconductor failure analysis equipment to investigate the causes of non-lighting and brightness degradation. In the "LED Defect Mode Discrimination," we performed lighting tests after lens polishing and observed the resin of the LED, polishing it to stages a, b, and c, conducting lighting observations for (a) and (b), and optical observations of the chip through the resin for (c). Additionally, we also have categories such as "Electrical Normal" and "Open, High Resistance." 【Initial Diagnostic Items for LED Packages】 ■ Electrical Characteristics Measurement ■ Visual Inspection ■ Lens Polishing / Internal Optical Observation of the Package ■ Lighting Test (Brightness Distribution Observation) *For more details, please refer to the PDF document or feel free to contact us.

Company：アイテス
Price：Other

Contract Analysis
Analysis Services
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis Product List and Ranking from 375 Manufacturers, Suppliers and Companies | IPROS GMS

Analysis Manufacturer, Suppliers and Company Rankings

Analysis Product ranking