Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
3871～3900 item / All 7704 items
Ideal for humidity/temperature measurement in a constant temperature and humidity chamber.
● Monolithic cell-type polymer sensor ● Temperature measurement range -50 to 180 ℃ ● Remote probe and printed circuit board ■ The EE99-1 humidity module is ideal for humidity/temperature measurement in constant temperature and humidity chambers. For more details, please download the catalog or contact us.
For cost-effective measurement of relative humidity (RH) and temperature (T)
● Compact design ● Easy installation and replacement ● Excellent price/performance ratio The EE040 is designed to measure relative humidity (RH) and temperature (T) cost-effectively in OEM applications. It features high-quality EEH210 RH and T sensing elements that provide reliable long-term stable measurement performance. The electronic circuit board and components are protected with a special varnish. Additionally, the unique E+E coating protects the RH sensor from dirt, dust, and corrosion, ensuring excellent long-term stability even in contaminated environments. Measurement data is available via two analog voltage outputs. The design of the EE040, along with its plug connection and the included mounting flange, makes design, installation, and replacement easy.
For high-precision low differential pressure measurement!
● Analog and digital output ● IP65 / NEMA 4X ● Accuracy ± 0.5 Pa ■ The EE610 has been developed for high-precision low differential pressure measurement in applications such as clean rooms, hospitals, laboratories, isolation rooms, and the pharmaceutical industry. It is suitable for air as well as all non-flammable and non-aggressive gases.
Ultra-lightweight compact GPS receiver equipped with a composite weather sensor.
Equipped with a GPS receiver, it continuously receives location, time, and solar position data. The compact body, measuring φ130×70 mm and weighing only 220 g, houses a high-performance composite weather sensor with 9 integrated elements. Additionally, it can be combined with our data logger for real-time measurements.
Small, low damage, thermistor temperature sensor!!
The leaf surface temperature sensor SE-LT-1M series is designed to minimize the impact on the leaf surface by using a specially developed bead-type thermistor that takes into account the potential damage to the leaf. It is designed to ensure effective thermal contact between the leaf and the sensor. This sensor is important for understanding the physiological state of plants. By measuring the leaf surface temperature, it is possible to determine the trends in transpiration from the stomata.
High precision, micro-variation support, compact low load!!
The stem diameter change measurement sensor is a high-precision LVDT sensor designed to monitor minute fluctuations in stem diameter in the micron range. The growth of plants and water balance affect the daily behavior of stem diameter, and the growth rate depends on the vegetative stage and environmental conditions. Daily fluctuations mainly represent variations in the plant's moisture content, and two data points—daily contraction changes and daily maximum values—are used to measure the moisture status of the plant. The SE-SD-5M series sensor measures the impact of water supply balance frequency and environmental factors on plant growth.
Measuring the subtle expansion and contraction activities of trees as they change day by day!!
The tree diameter measurement sensor measures the daily contraction amplitude and maximum value based on the water balance necessary for plant growth. The growth rate of trees varies with the stage of vegetation and environmental conditions, and diurnal fluctuations in plant growth change according to the moisture content of the plant (water balance).
High precision, long-term durability, optical turbidity sensor!!
Introducing the "High-Precision Long-Term Durability Turbidity Sensor" from Senecum Co., Ltd., which provides a wide range of sensors from agriculture, industry, and field measurement to experimentation. ◆◇◆Features◆◇◆ ● Selectable measurement ranges (0–10, 100, 400, 1000, 3000, 5000+ custom settings available!!) ● Automatic cleaning with a wiper!! ● High-precision measurement using proprietary technology ● Selectable output methods (RS422/485/232C: SDI-12, USB serial, analog current voltage) *For more details, please refer to the catalog or contact us.
High precision, rain and snow discrimination, raindrop size. For detailed information on rain and snow, this sensor is the one!!
This is an introduction to Senekom Co., Ltd., which provides a wide range of sensors from agriculture, industry, and field measurement to experimentation, featuring the "Disdrometer." ◆◇◆Features◆◇◆ - Accurate measurement of precipitation, intensity, and rainfall - Classification of raindrops into 440 classes - Safe design even in snowfall with models equipped with heaters - Dedicated software available *For more details, please refer to the catalog or contact us.
High-precision, high-cost-performance solar radiation sensor!!
This is an introduction to the "Solar Radiation Sensor" from Senekom Co., Ltd. [Authorized distributor of Apogee in the U.S.], which provides a wide range of sensors from agriculture, industry, and field measurements to experiments. ◆◇◆ Features ◆◇◆ ● Measurement range of 360~1120nm ● High speed with a response time of less than 1ms ● Excellent response to oblique light with cosine correction ● Models with data display and recording capabilities are also available *For more details, please refer to the catalog or contact us.
Compact and low-cost light quantum sensor! For sensors used in agriculture, research, and plant factory control!
This is a compact and high cost-performance light quantum sensor from Apogee. The wavelength range is set for sunlight (370-650nm). It can also be used for various monitoring systems for agriculture and research. 【Features】 ■ Wavelength range for sunlight: 370-650nm ■ Low price ■ Compact ■ Digital output (USB, Modbus, SDI-12)
Measurement automation light grid capable of measuring length/width/height of three dimensions and transparent objects!
The measurement automation light grid "MLG-2" features high measurement accuracy that can reliably detect very small objects, a transparent mode that ensures the detection and measurement of transparent bodies, and a high-speed response time due to fast scanning that can reliably detect fast-moving objects. The configuration software SOPAS ET, equipped with a menu-guided assistant function, allows for quick setup. It has high reliability due to its resistance to ambient light. The integrated interface and appropriate function blocks reduce the workload during commissioning, and the cloning function with IO-Link enables easy maintenance without the need for specialized technicians. 【Application Areas】 ■ Packaging Industry: Robot control and 3D measurement ■ Logistics: Volume measurement ■ Logistics: Package orientation adjustment ■ Logistics: Height measurement and protrusion measurement in dynamic warehouse systems ■ Machine Tools: Measurement of workpieces and tools ■ Traffic Technology: Vehicle distinction and classification ■ Food and Beverage Industry: Detection of bottles ■ Machine Tools: Measurement of track width *For more details, please refer to the PDF document or feel free to contact us.
Protection level IP65 or higher! Detection methods include capacitive, inductive, photoelectric, ultrasonic, and magnetic.
The proximity sensors we handle are waterproof, dustproof, low-cost, and can accommodate small lot orders, making them suitable for various fields. We will provide appropriate proposals tailored to your needs. Please feel free to contact us when you need assistance. 【Features】 ■ Multi-purpose ■ High durability ■ High reliability *We have started handling various sensor products. For more details, please contact us.
Fiber optic strain sensor (high spatial resolution type)
【Features】 ● Continuous distribution measurement of strain is possible with a pitch of less than 1mm !! (Values equivalent to hundreds of 1mm strain gauges can be derived from a single fiber) ● Excellent water resistance, explosion-proof properties, and heat resistance, allowing for long-term absolute strain measurement (without drift)
We will introduce a sensor system that can capture vibrations and sounds along the entire optical fiber line.
This product is a vibration distribution sensor that uses optical fiber as a sensor. The longitudinal vibration distribution along a single optical fiber is directly observable. The time variation of the vibration distribution can be monitored and recorded. Note that there is a trade-off relationship between distance and sampling speed. By slowing down the sampling, longer distance measurements can be achieved. 【Features】 ■ Longitudinal vibration distribution along a single optical fiber is directly observable ■ Time variation of the vibration distribution can be monitored and recorded ■ Capable of capturing vibrations and acoustics along the entire length of the optical fiber ■ Slowing down the sampling allows for longer distance measurements *For more details, please refer to the PDF document or feel free to contact us.
It enables extensive and high-precision observations and the provision of high-density observation data.
Franklin Japan observes lightning across Japan through the world-standard lightning observation network JLDN. It is possible to obtain stable and highly accurate lightning data over a wide area. In Japan's land areas, the capture rate exceeds 90%, with an average location error of less than 300 meters. 【Features】 ■ A network of sensors installed at 31 locations nationwide ■ Utilizes accurate time information sent from GPS satellites to observe lightning strike locations, times, and current values ■ A high-density network with an average of 6 to 7 sensors participating for each lightning strike ■ Minimal decrease in lightning capture rate due to failures of some sensors ■ Accurate and reliable observations available in real-time 24 hours a day *For more details, please refer to the PDF document or feel free to contact us.
Non-contact speed sensor utilizing the Doppler effect
The surface speed sensor measures the speed of the workpiece surface, allowing for the understanding of the transport speed and feed length of the workpiece itself, thereby achieving high quality and low loss in the production line. By adopting a laser with excellent coherence and beam quality as the light source, it enables high-precision and high-sensitivity speed detection. It can be used for speed detection at multiple points in a wide range of environments and can be installed on various devices. 【Features】 ■ Measures multiple points with a low-cost head ■ Compact and suitable for integration into production lines ■ The sensor head is palm-sized, making it easy to install in various locations ■ Outputs pulses synchronized with the detected speed and an analog voltage proportional to the detected speed ■ Condenses the technology and know-how cultivated in the development of vibration measurement devices to achieve low cost *For more details, please download the PDF or feel free to contact us.
A long push switch that is ON during normal operation and turns OFF when pressed (B contact).
A long push switch that is ON during normal operation and turns OFF when pressed (B contact).
NC mat sensor
It is a mat switch with NC contacts (B contacts).
High-sensitivity, shock-absorbing touch-off sensor
The touch-off sensor is a long B contact (NC contact) switch that is encapsulated in a cover, with conductive ink printed on PET film. One of its features is that when used in a pressed state, the circuit remains in the OFF state, eliminating the need for power consumption.
Touch Sensor Catalog Collection
We are giving away a complete collection of various sensor catalogs handled by Aider Corporation! = Please contact us if you are interested =
![[Column] Methods and Precautions for Measuring Magnetic Flux Density](https://image.mono.ipros.com/public/product/image/548/2000710192/IPROS38326920706032888181.png?w=280&h=280)
For those who are new to magnetic measurements: Methods and precautions for measuring magnetic flux density!
For measuring magnetic flux density, a Tesla meter (Gauss meter) is primarily used, employing a magnetic sensor called a Hall element to measure the magnetic flux density. The Hall element has a defined area that detects magnetic fields, generating a voltage proportional to the magnetic flux density in the perpendicular direction to that area. Many of these sensors are very small, allowing for pinpoint measurement of magnetic flux density. [Overview] ■ Measurement methods for magnetic flux density ■ Precautions for magnetic flux density measurement - Position of the magnetic sensor - Orientation of the magnetic sensor - Temperature *Detailed content of the column can be viewed through related links. For more information, please feel free to contact us.
Differential Transformer Displacement Sensor LT2 Series LVDT
A differential transformer displacement sensor with environmental resistance and robustness that surpasses the LT1 series, in addition to being compact, high precision, and highly stable. 【Features】 ○ Capable of long-distance transmission and long-stroke measurement ○ Long lifespan ○ Achieves a wide range of applications and temperature ranges ○ Compact size, 1/2 to 1/3 compared to standard products ● For other functions and details, please download the catalog.
Short & Slim! A spring-loaded type has been added to the trusted and proven LT series.
The "LT1-SP Series" is a spring-integrated displacement sensor that can accommodate a wide range of measurements through changes in the tip contact and spring pressure. There are three types of terminal processing available: lead wire type, connector type, and cable draw-out type. It can measure strokes of up to 120mm with high precision. Additionally, it employs a significant amount of SUS material, allowing for stable measurements over the long term, and features a simple structure that is resistant to environmental factors. 【Features】 ■ Easy installation with a spring type ■ Wide range of measurement capabilities through changes in tip contact and spring pressure ■ Long-term stable measurements due to the extensive use of SUS material ■ Simple structure that is resistant to environmental factors ■ High precision measurement of strokes up to 120mm *For more details, please refer to the PDF document or feel free to contact us.
A specially shaped sensor that utilizes the characteristics of optical fibers according to its application. It is fully explosion-proof and can be used in various scenarios. New designs are also available.
In recent years, improvements in the quality of optical fibers and the production of various types of fibers have made it possible to develop sensors that were unimaginable a while ago. By deploying sensors in a 2-millimeter gap within devices that generate ultra-strong electromagnetic fields, we have designed, developed, and released various sensors tailored to different scenarios, such as sensors that monitor the state of the device and sensors that detect temperature at intervals of several centimeters in depth. We also contribute to reducing construction and sensor costs by proposing optical fiber-type sensors for cases where traditional thermocouples are inadequate or where excessive numbers lead to exorbitant costs. Additionally, we have developed a sensor cable that, despite its small diameter (5Φ or less), can withstand high pressure and is easy to handle, receiving positive feedback from contractors. Of course, we also offer options for high-temperature and ultra-low-temperature applications, so if you have any ideas about potential uses, please let us know, and we will provide suggestions as much as possible.
Pressure sensor with IP67 waterproof structure.
The LT series is a waterproof terminal box type pressure sensor that allows for zero and span value adjustments across a wide pressure range from 0 to 20 kPa for low pressure to 0 to 2 MPa for medium pressure. It is ideal for pressure management in water treatment systems and tank level measurement. - Built-in amplifier circuit with 4-20 mA output - Zero span adjustment function - IP67 waterproof structure For more details, please download the catalog or feel free to contact us.
Connector-type welded structure gauge pressure type
The CL series features a welded structure that does not use O-rings in the wetted parts. The materials for the wetted parts are SUS316 and SUS316L, which offer excellent corrosion resistance. It is compatible with a wide range of pressure media, including gases and chemical solutions. - Output signals of 1-5 VDC or 4-20 mADC with built-in amplifier circuit - Measurement range from 20 kPa to 5 MPa - Accuracy of 0.25% F.S. or better can be manufactured - Capable of producing compound pressure and vacuum For more details, please download the catalog or feel free to contact us.
Pressure sensor that can also be used as a submerged water level sensor.
This is a high-precision pressure sensor that is optimal as an immersion-type water level sensor and pressure sensor. It is ideal for pressure observation in underwater piping, waterways, groundwater, reservoirs, and tanks. It has a built-in atmospheric vent pipe, eliminating the need for atmospheric correction.
Stainless steel diaphragm structure absolute pressure sensor
The HA series is a sensor for absolute pressure, allowing for high-precision measurement of vacuum areas unaffected by atmospheric fluctuations. - Output signal of 1-5 VDC or 4-20 mADC with built-in amplifier circuit - Pressure range selectable from 50 to 600 kPa abs For more details, please download the catalog or feel free to contact us.
