We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Sensors.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Sensors Product List and Ranking from 1357 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

Sensors Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. null/null
  2. Suntex Co., Ltd. Shizuoka//Industrial Electrical Equipment
  3. 日本ビジネスロジスティクス（JBL） 藤沢北事業所 Kanagawa//Testing, Analysis and Measurement
  4. 4 Kistler Japan G.K. Head office Kanagawa//Testing, Analysis and Measurement
  5. 5 KELLER Pressure Japan 日本支社 Tokyo//Machine elements and parts
Go to Company Ranking

Sensors Product ranking

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. Clamp-on flow sensor "FD-H series"
  2. AI-equipped image sensor 'IV4 Series'
  3. Fiber Unit FU Series
  4. 4 Safety Door Sensor GS Series
  5. 5 Radar Level Sensor "FR Series"

Sensors Product List

7441～7470 item / All 7739 items

Displayed results
Passive Sensor Round Surveillance Type PA-6810WA

Passive Sensor Round Surveillance Type PA-6810WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. ● Transparent sprays or items with low near-infrared reflectivity may not be detectable. ■Wide Base Design ● By widening the base part (Φ150mm) compared to conventional designs, the issue of noticeable dirt marks on the ceiling surface during sensor replacement has been resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the blinking and illumination of the memory indicator light (yellow). ● The memory indicator light blinks for 3 minutes after the alarm is triggered, then continues to illuminate for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type PA-6820W

Passive Sensor Surface Surveillance Type PA-6820W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base part (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the memory indicator light (yellow) blinking or lighting up during the alert state. ● The memory indicator light blinks for 3 minutes after the alarm, then continues to light up for 47 minutes before automatically turning off. ● The function can be disabled using the mode selector. ■Improved Installation and Maintenance The snap-in method is adopted for attaching and detaching the sensor unit and base unit, allowing for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up) ● Attachment: Wall mounting is also possible with BL-5000, BCW-401 (sold separately).

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6805W

Passive Sensor Spot Surveillance Type PA-6805W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the memory indicator light (yellow) flashing or lighting up during the alert state. ● The memory indicator light flashes for 3 minutes after the alarm, then continues to light up for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Round Surveillance Type PA-6810B

Passive Sensor Round Surveillance Type PA-6810B

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. This allows for the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. It enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. It is also suitable for renovations. ■Black Color Available for All Warning Type Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). The visibility and sensitivity of the LED are equivalent to the white models. ■Unique Warning Area Configuration Thanks to our unique optical technology that creates a sharp warning area, effective detection performance is achieved regardless of area settings using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6805B

Passive Sensor Spot Surveillance Type PA-6805B

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) The current consumption is reduced to about one-third (8mA) compared to our conventional products. This allows for the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) The operating voltage is DC 7 to 30V. This enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. It is also suitable for renovations. ■Black Color Available for All Caution-type Models We have introduced a black version that considers harmony with the ceilings of temples, museums/art galleries, stores, etc. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white version. ■Unique Caution Area Configuration Thanks to our unique optical technology that creates a sharp caution area, effective detection performance is achieved regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6806B(BL)

Passive Sensor PA-6806B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to approximately one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC7-30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. ■Black Color Available for All Warning Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums/art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white version. ■Unique Warning Area Configuration Our unique optical technology creates a sharp warning area, providing effective detection performance regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type for 20m PA-6720

Passive Sensor Surface Surveillance Type for 20m PA-6720

Standard passive sensor equipped with an auto-reset memory function.

■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during standby by the blinking and lighting of the memory indicator light (yellow). ● The memory indicator light blinks for 3 minutes after the alarm is triggered, then continues to stay lit for 47 minutes before automatically turning off. ● The function can be disabled using the mode selector. ■Easy Sensitivity Adjustment Function Sensitivity settings can be adjusted in four levels by switching the mode selector. This allows for optimal security based on the installation location. ● Adjustment range: 60%・80%・100%・120% ■Device Abnormality Alarm Function In the event of damage or disconnection in the internal circuit or connection parts of the sensor, the system will notify you of the abnormality through continuous alarm output and continuous lighting of the alarm indicator light. ■Reliable Design Resistant to Radio Interference Effective measures have been taken in circuit and mechanical design to counteract electrical noise from the line and airborne noise. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-altitude installation passive sensor, surface surveillance type, PA-8420

High-altitude installation passive sensor, surface surveillance type, PA-8420

Due to its unique high-density surveillance area, it can be installed in high places such as atriums and lobbies.

■Unique surveillance area capable of high-altitude installation This sensor can monitor from high altitudes, which was difficult with conventional sensors. Its unique high-density surveillance area allows for installation at heights of 4m to 8m. The high-density surveillance area, composed of four reflective mirrors, can be used in locations with high ceilings, such as atriums and event spaces, as well as under eaves in truck yards. ■Installable indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables surveillance even in locations where near-infrared beam sensors cannot be installed. ■Robust housing case Adopting an AES resin housing case, it has improved impact resistance and weather resistance. The risk of damage is relatively low even in places like gyms where ball games are played. ■Rainproof structure In locations where wind and rain can be severe, such as under building eaves, its excellent weather-resistant sealing structure prevents water intrusion. (When using exposed wiring, please use the included waterproof bushing or conduit for wiring.)

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive sensors ideal for spot surveillance at entrances, exits, and pathways.

■ Two types: surface-mounted and recessed This is a sensor installed on the ceiling surface of entrances and corridors to detect intruders. We offer two models: surface-mounted and recessed, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■ Intrusion area adjustment function The width of the monitored area can be adjusted with a single touch according to the location being monitored. Wide: 2.8m at a height of 3.5m Narrow: 1.4m at a height of 3.5m. Additionally, the area angle can be adjusted from 3° to 30° in 10 steps (vertical angle from -10° to +20°). ■ Sensitivity adjustment volume The sensor is factory-set to the appropriate sensitivity, but it also includes a "sensitivity adjustment volume" that allows for fine-tuning based on installation conditions.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type: Embedded Type PA-750U

Passive Sensor Spot Surveillance Type: Embedded Type PA-750U

Passive sensors ideal for spot surveillance at entrances, exits, and corridors.

■Two types: ceiling-mounted and recessed This is a sensor installed on the ceiling surface of entrances and corridors to detect intruders. We offer two models: ceiling-mounted and recessed, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■Intrusion area adjustment function The width of the monitored area can be adjusted with a single touch according to the location being monitored. Wide: 2.8m at a height of 3.5m Narrow: 1.4m at a height of 3.5m. Additionally, the area angle can be adjusted up to 30° in 10 steps (vertical angle from -10° to +20°). ■Sensitivity adjustment volume The device is factory-set to the appropriate sensitivity, but it includes a built-in "sensitivity adjustment volume" that allows for fine-tuning based on installation conditions.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-4820A

Passive Sensor PA-4820A

Passive sensor for wall and corner mounting adopting fuzzy theory.

■Adoption of Fuzzy Theory The two outputs from the newly developed dual twin element are divided into two pieces of information: the temperature difference and shape difference between the detection object and the background. Using fuzzy theory, it accurately determines whether the detection object is a human or a small animal and outputs an alarm. Even when phenomena that are likely to cause malfunctions, such as small animals (like mice), stray light, drafts, and external noise occur, the dual twin effect ensures that there is little to no impact. ■Abnormal Alarm Function While the sensor is in a standby state, the built-in program allows the sensor itself to monitor the following functions. If an anomaly is detected, it notifies of the abnormality through continuous alarm output and the continuous illumination of the alarm indicator light. ●Low Power Voltage Abnormality… The newly developed CPU constantly monitors the power supply voltage provided to the sensor. If the power supply voltage drops below a certain level, the abnormal alarm is activated. ●Equipment Abnormality… In the unlikely event that damage or disconnection occurs in the internal circuits or connections of the sensor, the abnormal alarm is activated. ●Aiming Position Abnormality… Even if the aiming device is forgotten to be returned after confirming the surveillance area, the abnormal alarm is activated.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor and indoor passive sensor, surface surveillance type, PIR-50N

Outdoor and indoor passive sensor, surface surveillance type, PIR-50N

Wide area, long-distance regions can be monitored in a surveillance-type manner.

Wide-range, long-distance surveillance area The unique surveillance area can monitor a wide range and long distance, with a perimeter surveillance capability of 50 meters for the surface surveillance type. ■ Can be installed outdoors and indoors It can be installed not only outdoors but also indoors. Since it is installed on one side only, it can easily provide surveillance in places where opposing infrared sensors cannot be installed. ■ Sturdy housing case Adopts a housing case made of AES resin. Impact resistance and weather resistance have been improved. There is less concern about deterioration from direct sunlight and wind and rain outdoors, and the standard inclusion of a steel plate long hood reduces the impact of bird droppings. ■ Rainproof structure Even in locations exposed to wind and rain, such as under eaves of buildings or on freestanding poles, the excellent weather-resistant packing structure prevents water intrusion. (When installing with exposed wiring, please use the included waterproof bushing or conduit.) ■ Functions that assist in operation and inspection after installation ● Equipped with a sighting device A sighting device is included to easily set and adjust the surveillance area. ● C contact output The alarm contact uses long-lasting, silent, non-voltage semiconductor contacts to form the C contact.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Indoor embedded infrared sensor available in two types: reflector reflection type (for 5m) and direct reflection type (for 1m).

■Adoption of two types of reflection methods The infrared beam is reflected by the human body passing through the area, and the light entering the main unit is detected, triggering an alarm using the infrared beam light entry method. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security monitoring. ■Easy installation Thanks to the integrated reflection method that combines the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This allows the infrared sensor to be used even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a built-in type, it includes an optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect both moving and stationary objects, making it suitable for various applications, including security. ■User-friendly design ● Contact switching function that can be set according to the operating system (a contact/b contact) ● Tamper function to prevent vandalism ● Alarm indicator light for convenient operation confirmation (red LED: lights up during alarm) ● Sensitivity adjustment available according to the installation location

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor PXB-40TE

Infrared Sensor PXB-40TE

The dual-beam opposing infrared sensor has evolved into a new era! An infrared sensor packed with patented technology creates safety and trust!

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong in harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (Low power consumption) Compared to conventional products (PB-TE series), power consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) Complies with the environmentally conscious RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, and diisobutyl phthalate.) ■Structure resistant to insect intrusion (Insect-proof and drip-proof design) With insect-proof bushings that encase the wires and a watertight structure, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water intrusion compared to our conventional products.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor, near-infrared beam interruption type, PXB-100F

Infrared sensor, near-infrared beam interruption type, PXB-100F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance performance to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced power consumption (to less than 50% compared to our previous models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even for long-distance connections, thereby greatly reducing wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on a pole.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor, near-infrared beam interruption method, PXB-200F

Infrared sensor, near-infrared beam interruption method, PXB-200F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point, thus protecting the circuit board from corrosion. ■Energy-saving design (Reduced current consumption) We have significantly reduced current consumption (to less than 50% compared to our conventional models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, which greatly reduces wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles. As a result, back-to-back mounting has become easier even at high altitudes.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor [Salt Damage Prevention Product] PXB-200HFC

Infrared Sensor [Salt Damage Prevention Product] PXB-200HFC

Achieving excellent airtightness with IP65 performance! This infrared sensor is resistant to salt damage and can be used with confidence in harsh environments.

■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the distinguishability from ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (4-stage high-power beam) By employing a 4-stage high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false triggers during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-efficient design We have significantly reduced power consumption (to less than 50% of our previous models). This allows for the use of smaller power supplies compared to before, eliminating the need for thick wiring even over long distances, thereby greatly reducing wiring material costs. ■Green design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) (RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.) ■Dustproof and splash-proof structure (IP65) Through improvements in insect-proof bushings and dedicated gaskets that envelop the wiring, we have achieved an IP65 rating (equivalent to IP67).

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low power consumption infrared sensor [Salt damage resistant product] PXB-200SWC

Low power consumption infrared sensor [Salt damage resistant product] PXB-200SWC

Outdoor 200m 4-stage high-power beam infrared sensor with low power consumption and wireless capability.

■Solar Power Compatible By supplying power from a separately sold solar power unit, it can be installed and operated in locations without a power source. This allows for the introduction of infrared sensors at gates in public parking lots without the need for wiring work. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■Strong Against Harsh Environments (4-Stage High Power Beam) By employing a 4-stage high power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false triggers during adverse weather conditions such as fog, snow, and heavy rain. Expanded Optical Axis Angle Adjustment In addition to ±90° in the horizontal direction, it achieves ±20° in the vertical direction. This allows for flexible installation on slopes. <Reference> Within an elevation difference of 18m at 50m Within an elevation difference of 36m at 100m Within an elevation difference of 72m at 200m Dustproof and Splash-Proof Structure (IP65) By improving the insect-proof bushing that envelops the electric wires and the dedicated packing, we have achieved IP65 (equivalent to IP67).

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Combination Sensor COM-IN-100AL

Combination Sensor COM-IN-100AL

Intelligent sensor that integrates infrared (4-beam opposing type) and microwave (opposing type).

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, ensuring high reliability even in bad weather conditions. ■Two models: "L" type and "H" type The microwave section has two models, "L" type and "H" type, and the infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed in a straight line. ■No application process for radio station license required This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" as permitted by domestic radio laws, so no application or procedures for a radio station license are required from the customer. *The first domestic security-oriented opposing microwave sensor. ■Intelligent features ● Four-stage modulation frequency switching This feature is effective when conducting linear surveillance with multiple sensors or during multi-stage surveillance. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ● External environment diagnostic function If the infrared light reception amount falls below a certain level due to adverse weather conditions (such as dense fog or heavy snowfall), an environmental deterioration signal will be output.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fence Sensor (for 150m) D7K-150 for 150m

Fence Sensor (for 150m) D7K-150 for 150m

It is a fence sensor that detects intruders from the perimeter fence and conducts security measures.

■Surface surveillance method monitoring the entire fence (net part) By adopting the surface surveillance method, more stringent security is possible. Additionally, it is an optimal sensor for dual surveillance use in conjunction with infrared sensors at important facilities (such as power plants). ■Not affected by snow, dense fog, frost, etc. This sensor is also ideal for installation locations where infrared surveillance is difficult. ■Simple hardware configuration The simple configuration allows for the construction of a system tailored to customer requirements. ■Reduction of construction costs and shortening of construction period Since the sensor cables are simply secured to the fence with cable ties (accessories included), it helps to reduce costs and shorten the construction period.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Microwave Sensor for Outdoor Use, 50m, MW-50AH

Microwave Sensor for Outdoor Use, 50m, MW-50AH

Microwave sensors that demonstrate high reliability even in harsh environments.

■ Performance in Adverse Environments Using 24GHz microwaves, it remains stable even in adverse conditions such as rain, snow, and fog, and is not affected by flying objects like birds or paper scraps. ■ Two Models: "L" Type and "H" Type There are two models with microwave frequencies: "L" type and "H" type, which prevents mutual interference when multiple units are installed along a straight line. ■ No Need for Wireless Station License Application This product falls under the category of "Specified Low Power Radio Station, Wireless Equipment for Mobile Object Detection Sensors" permitted by domestic radio laws, so no application or procedures for a wireless station license are required from the customer. * The first domestic security-oriented opposing microwave sensor. ■ Built-in Monitor Output Function To facilitate angle adjustment during installation and regular inspections, a monitor output is built-in. By using commercially available testers, angle adjustments can be made easily and reliably. ■ Built-in AGC Circuit It includes an AGC circuit that automatically maintains appropriate sensitivity according to the surrounding environment. ■ Built-in Adjustment Mode Function After installation, by switching to adjustment mode during tuning, it allows for quick operation checks and monitoring of output voltage.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor White UV Detection Method FS-3000(W)

Flame Sensor White UV Detection Method FS-3000(W)

It can be widely used not only for fire alarm purposes but also as a warning in non-smoking and no open flames areas.

■ Three power supply options for flexible selection based on usage The power supply can use two AA alkaline batteries, or depending on the application or installation location, a separately sold dedicated AC adapter or lithium battery can also be used. ■ Equipped with external output for system upgrades With an external output terminal, it can emit warning sounds and alarms while simultaneously outputting an alarm signal (open collector output). It can be used for remote monitoring and alert devices in a disaster prevention system when combined with receivers, etc. (up to DC30V, 50mA) ■ Selectable from two types of voice notifications and one type of alarm sound You can select between two types of voice notifications (no smoking alert, fire hazard alert) and one type of alarm sound using the mode selector. Additionally, the volume of the voice output can be adjusted using the volume control on the back of the unit. ■ Timer-based operation setting function included The alarm will only activate if the flame (ultraviolet) continues for longer than the set timer duration. The detection timer can be selected from four levels based on usage conditions: 1 second, 3 seconds, 6 seconds, or 15 seconds. It can be easily set using the mode selector on the back of the unit.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010A(W)

Flame Sensor FS-5010A(W)

Instantly catch flames 30 meters ahead! A revolutionary ultraviolet detection flame sensor that can be installed outdoors.

■Two types of power supply available in the series We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Eight levels of sensitivity adjustment to cancel false triggers To account for all possible sources of false triggering, we have established two levels of sensitivity settings (High and Low) and four levels of detection timer settings (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of eight detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body fits various installation locations. Thanks to the unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation location is monitored by an indicator light. This allows you to check surrounding ultraviolet sources (causes of false triggering), making it easy to confirm during sensitivity settings or when experiencing unstable operation.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor FS-5010(B)

Flame Sensor FS-5010(B)

Instantly catch flames 30 meters ahead! A revolutionary ultraviolet detection flame sensor that can be installed outdoors.

■Two types of power supply available in the lineup We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model based on your application and installation location. ■Eight levels of sensitivity adjustment to cancel false triggers To account for all possible sources of false triggers, we have established two levels of sensitivity settings (High and Low) and four levels of detection timer settings (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. With a total of eight detection conditions, you can set it according to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body matches various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation location is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false triggers) and makes it easy to confirm during sensitivity settings or when the operation is unstable.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light-type active sensor (with touchless function) DA-TL100

Light-type active sensor (with touchless function) DA-TL100

The automatic door opens when you hold your hand over it. A touchless feature with a non-contact sensor!

■Equipped with Touchless Function By pinpointing the activation area of the sensor above the automatic door to the door plate, it can simulate the function of a touch switch. When you bring your hand close to the automatic door plate, the sensor detects it and opens the door, allowing you to open the door without contact (touchless). ■Reduce Malfunctions of Automatic Doors with Detailed Detection Area Settings Touchless detection area settings can be configured in four ways: central, left, right, with four spots each, totaling twelve spots. It is compatible with sliding doors and left/right single sliding doors. The door will not open when approached from the side, which effectively reduces unnecessary opening and closing of the automatic door. ■Can Also Be Used as a Standard Non-Contact Sensor By switching the dip switch, it can also be used as a conventional activation non-contact sensor. ■Available Cover Colors The cover colors available are S Silver, B Bronze, W White, BL Black, and ST Stainless Steel.

  • Safety Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor UV Detection Method for AC100V FS-6000A

Flame Sensor UV Detection Method for AC100V FS-6000A

A super high-sensitivity flame sensor that instantly detects flames 30 meters away, capable of outdoor installation and equipped with a voice alert function.

■Two power types available in the lineup We offer two types of power: DC12V and AC100V. You can select the model according to your application and installation location. ■Selectable from two types of voice notifications and one alarm sound You can choose between two types of voice notifications (no smoking notification and fire hazard notification) and one alarm sound using a dip switch. Additionally, you can adjust the volume of the audio output using the volume control on the back of the unit. ■Diverse adjustment functions to cancel sources of malfunction By combining a four-stage detection timer setting with sensitivity adjustment (40% to 100%) using a sensitivity volume, you can achieve optimal detection sensitivity tailored to the site. Furthermore, you can eliminate unnecessary detection areas using the included area mask seal. ■Equipped with a newly developed ultraviolet environment monitor function The ultraviolet environment at the installation site is monitored through sound and a display lamp. This allows you to check the strength of surrounding ultraviolet sources (causes of malfunction), making it easy to verify during installation or when operation is unstable. ■Equipped with external output for system upgrades When a detection output is triggered, it simultaneously outputs a detection signal along with warning voice and alarm sound.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor PIR-T35N(G)

Outdoor/Indoor Passive Sensor PIR-T35N(G)

A passive sensor for outdoor and indoor use that adopts a unique triple mirror method and signal processing method, significantly reducing missed reports and malfunctions.

■Triple mirror that forms a unique area Equipped with three sets of optical units within the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles outdoor lighting, and the internal mirrors can be adjusted to modify the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false alarms caused by small animals By adopting independent detection units for each mirror, signal processing reduces false alarms caused by small animals such as cats. Furthermore, by attaching a bird stopper to the top surface, it becomes difficult for birds to perch, significantly reducing unexpected false alarms. ■Supports installation heights of 2.0 to 6.0m! Since it can be installed at heights that are difficult for people to reach, it prevents vandalism against the sensor. Additionally, by using high-density mode, it can be installed at heights of up to 6m. (In high-density mode, cancellation of small animals is disabled.) ■High-density area using triple mirrors Due to the seamless high-density surveillance area, it allows for comprehensive monitoring without gaps.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor PIR-T35N(W)

Outdoor/Indoor Passive Sensor PIR-T35N(W)

A passive sensor for outdoor and indoor use that adopts a unique triple mirror system and signal processing method, significantly reducing missed reports and malfunctions.

■Triple mirror that forms a unique area Equipped with three sets of optical units within the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique arrangement design. Additionally, the design resembles outdoor lighting, and the internal mirrors can be adjusted to change the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false alarms caused by small animals By adopting independent detection units for each mirror, signal processing reduces false alarms caused by small animals such as cats. Furthermore, by attaching a bird stopper to the top surface, it becomes difficult for birds to perch, significantly reducing unexpected false alarms. ■Compatible with installation heights of 2.0 to 6.0m! Since it can be installed at heights that are not easily reachable by people, it prevents vandalism against the sensor. Additionally, by using high-density mode, it can be installed at heights of up to 6m. (In high-density mode, cancellation of small animals is disabled.) ■High-density area using triple mirrors With a seamless high-density surveillance area, it enables comprehensive monitoring without gaps.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-way adapter RCA-2

2-way adapter RCA-2

2-way adapter RCA-2

Features ● Can split one RCA jack into two. It allows one input to be expanded into two inputs. (Usage example) Using a mat sensor and a push button together. ● Applicable products: BC series, HC-116

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Liquid level sensor for food applications

Liquid level sensor for food applications

Automate food filling management! Prevent production stoppages due to liquid depletion.

In the food industry’s filling process, maintaining product quality and improving production efficiency are essential. In particular, filling defects due to insufficient liquid levels and the resulting equipment downtime can lead to significant losses. Our liquid level sensor automatically switches ON when the liquid level falls below a certain amount, alerting users to the shortage. This helps prevent liquid depletion in the filling process and establishes a stable production system. 【Usage Scenarios】 - Monitoring liquid levels in food filling machines - Monitoring liquid levels in raw material tanks - Preventing product defects due to liquid depletion - Ensuring stable operation of production lines 【Benefits of Implementation】 - Reduction in work time through automation of liquid level monitoring - Improved production efficiency by preventing equipment downtime and product defects due to liquid depletion - Stabilization of product quality

  • Liquid level control/level switch
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.