フロロテクノロジー List of Products and Services

The compounds subject to PFAS regulation at this time are as follows: Complete regulation: PFOS, PFOA, and precursors of PFHxS, with almost all applications being regulated. Planned regulation in Europe: PFHxA, which will be banned for the following limited uses: textiles, leather, paper, food packaging, shoes, etc. Several fluorochemical manufacturers have announced the discontinuation of their products; however, our products do not contain any components subject to the above regulations. Therefore, we do not plan to halt supply at this time. We synthesize effective ingredients in-house that exhibit functionality, and we accept OEM supply in small quantities according to customer specifications (types of active ingredients, ingredient concentrations, solvents used, packaging, labels, etc.). If you are experiencing difficulties due to the discontinuation of products such as release agents or water- and oil-repellent agents, we can provide information, suggestions, and samples of alternative products. Please feel free to contact us.

• paint

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that molded products remain clean and do not require washing. It is the only release agent that does not cause cloudiness when molding transparent resins. With a thin film at the nanometer level, it demonstrates excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It has high release properties and excellent durability, with a proven track record of continuous release over thousands of shots. It is particularly effective in situations where conventional release agents fail. 【Features】 ■ The release agent components react with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ No removal of the film is required during mold reworking. ■ There is no transfer of release agent components, and cleaning of molded products is unnecessary. ■ When performance degrades, reapplication is as simple as top-coating! No need to remove the old film. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.).

• Coating Agent

A high-performance release agent with proven results in various fields, the fluorine-based release agent "Fluorosurf" has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. Please note that this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This offer is limited to corporate clients. It cannot be used for applications involving food or medical purposes.)

• Coating Agent

The current regulations regarding PFAS are as follows: Complete regulation: PFOS, PFOA, and precursors of PFHxS are subject to regulation for almost all applications. Planned regulations in Europe: PFHxA will be banned for the following limited uses: textiles, leather, paper, food packaging, shoes, etc. For PFAS (per- and polyfluoroalkyl substances) other than those mentioned above, it has been considered that there are no impacts on the environment or human health in the past. There is no evidence that substances other than the currently regulated PFAS are harmful, and due to the significant impact on industries such as semiconductors and automobiles if regulations were imposed, regulations in Europe are currently under consideration. This regulation is expected to be reduced in the future, and the compounds and applications subject to regulation have not yet been determined. Several fluorochemical manufacturers have announced the discontinuation of their products; however, our products are currently not subject to regulation, so we do not plan to halt supply. If you are facing issues due to the discontinuation of products such as release agents or water- and oil-repellent treatments, we can provide information, suggestions, and samples of alternative products. Please feel free to contact us.

• paint

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" has numerous achievements in waterproofing and insulation protection for automotive circuit boards and electronic components. Additionally, it is not subject to PFAS regulations. 【Performance Features】 ■ Higher moisture and waterproofing properties compared to other resins! → It has 4 times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. This minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect circuit boards during electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ In reactive coatings (silicone, UV acrylic, etc.), unreacted components remain and affect properties. This product does not leave unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failures at electrical connections after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

• Coating Agent

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. Free samples are available upon request. 【Introduction to Background】 ■ Prevent metal migration due to moisture in multilayer mounted circuit boards ■ Short circuits and failures caused by water droplets and humidity during outdoor use ■ Prevention of fire due to short circuits from leakage of lithium battery electrolyte ■ Occurrence of leaks and malfunctions due to condensation in high humidity *If you would like a free sample, please include "Request for Sample" in your inquiry.

• Coating Agent

The fluorosurf FG-3650 series protective coating for electronic substrates has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. We offer free samples to those who request them. 【Challenges】 ■ High waterproofing ■ Quick-drying ■ Non-hazardous with low odor since the equipment is not explosion-proof *If you would like a free sample, please include "Request for Sample" in your inquiry.

• Coating Agent

The fluorosurf FG-3650 series protective coating for electronic substrates is specially designed for waterproofing and insulation protection of electronic components, as well as moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based coatings, and exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It can be applied using a dispenser or spray, and the application is completed in just 5-10 minutes with room temperature drying! It is non-flammable, not subject to fire safety laws, and not classified as an organic solvent under safety and health regulations, significantly reducing management items and equipment costs on site. *Free samples are available for those who wish (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine component rises to the surface of the hard coating and exhibits its functions, and during UV irradiation, it co-polymerizes with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip resistance, and water and oil repellency by adding just a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent to exhibit its functions, and an addition amount of about 1-3% is sufficient. It offers good cost performance. When exposed to UV light, it co-polymerizes with the components of the hard coat agent, enhancing wear resistance as well. [Introduction to Background] ■ We want to impart anti-fouling and anti-reflective functions to optical films. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【Issues】 ■ It must be a PFOA-compliant product that can maintain the dispersion of PTFE similar to C8 types over the long term. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FloroSurf FG-5093" is a metal dry lubrication coating agent made by dissolving a special lubricating fluororesin in a non-flammable fluorinated solvent. When applied to a metal surface with a brush or spray, a dry lubrication film bonds to the surface with approximately 10 minutes of room temperature drying, forming a durable low-friction surface at the nanometer level. [Features] - The bonded lubrication film is durable. - It does not affect the material of the drive belt. - Heat resistance up to 200°C. - Unlike lubricating oils, it does not contaminate the surroundings. - Reapplication can be done easily with just a topcoat! Other examples are also available! *If you would like a free sample (limited to corporations), please include "Sample Request" in your inquiry.

• Coating Agent

【Issue】 ■ Achieve dirt resistance without changing the appearance of the material with a transparent film! ■ Easy application on-site and air dries at room temperature ■ Durability of over one year The FluoroSurf FG-5000 series offers a durable dirt-resistant coating! A dirt-resistant coating is a treatment that protects products from dirt. Cooking utensils and furniture can accumulate various stains such as fingerprints and water marks over long-term use. However, by applying a dirt-resistant coating, dirt removal becomes easier, reducing the hassle of daily maintenance. Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry. (This is for wholesale only. We do not sell to individuals.)

• Coating Agent

Anti-fouling coating refers to a treatment that protects products from dirt. Faucet fixtures can easily accumulate scale from the water, making it difficult to remove. Even aesthetically pleasing faucets can be ruined by scale and fingerprint stains, which detracts from their design. However, by applying an anti-fouling coating, dirt can be easily removed, reducing the hassle of daily maintenance. 【Reasons to Choose FluoroSurf FG-5093】 ■ Dirt can be easily removed thanks to the effects of fluorine ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ When the effect diminishes, reapplication can easily restore performance. Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Anti-fouling coating refers to a treatment that protects products from dirt. Cooking utensils and machinery accumulate various types of dirt over prolonged use. In elevators, fingerprints on the control panel and door areas can be a concern. If this dirt is left unattended, it not only affects the appearance but can also hinder the original performance, and in the worst case, rust may develop. By applying anti-fouling coatings like FluoroSurf FG-5093, dirt removal becomes easier, thus reducing the effort required for daily maintenance. **Problems Solved by Anti-Fouling Coating** - Hard to leave fingerprints and easy to wipe clean - Does not alter the texture of stainless steel Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.*

• Coating Agent

FloroSurf FS-702X can be added in small amounts to radical polymerization type hard coatings to impart anti-fouling properties and low refractive index. As a practical example, it is used in plastic-type touch panels and polarizers for liquid crystal displays. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Anti-fouling coating refers to a treatment that protects products from dirt. Cooking utensils and machinery accumulate various types of dirt over prolonged use. If this dirt is left unattended, it can hinder the product's original performance, and in the worst case, it may lead to product failure. However, by applying an anti-fouling coating, the removal of dirt becomes easier, thus reducing the hassle of daily maintenance. [Introduction to Background] ■ A durable anti-fouling coating agent is needed without changing the appearance. ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are prominent on stainless steel control panels and inner doors. ■ Improvement of light transmittance and fingerprint prevention for films used on displays. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "Fluoro Surf NL Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. [Challenge] - We want to increase throughput. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

FluoroSurf/Mold Free, when applied to nozzles and dies, forms a fluorine-based film on the metal surface, providing slip and non-stick properties. This film adheres strongly to the metal, effectively reducing melt fracture, sharkskin, and streaking continuously. When the effectiveness diminishes, reapplication with a brush or spray will restore its performance. There is no need to remove old components. It is non-flammable, so you can use it with peace of mind. It does not contain substances subject to PFAS regulations (such as PFOS, PFOA, etc.). *Free samples are currently available. If you would like one, please include "Sample Request" in your inquiry.

• Coating Agent

【Issue】 - Currently, the yield rate is 0%. No good products can be obtained with conventional release agents. We want to achieve continuous molding for at least 1000 shots. 【Solution】 Using "Fluorosurf FG-5093" makes it possible to mass-produce 1000 shots! Additionally, cleaning of the molded products is unnecessary, significantly improving process efficiency! Fluorosurf FG-5093 reduces the adhesion of the molding resin to the surface when applied to the mold, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It proves effective in cases where conventional release agents fail to work properly. It has excellent durability, with a track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【 Case Study in Thin CFRP Molding 】 1. Background Introduction In the thin molding of carbon fiber, such as fuel cell separators, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1000 shots became possible, and mass production was confirmed. Additionally, there is no transfer to the molded product, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The FluoroSurf FS-2060 series is a water and oil repellent treatment agent developed for fibers and leather. It has a proven track record as a concentrated waterproof spray. It is less expensive compared to non-flammable solvent types. This petroleum-based solvent type is suitable for water repellent treatment of fibers and leather, as well as for wood and building materials. 【Features】 - High water and oil repellency with super water-repellent levels depending on the material - Flexible film that does not compromise the texture of fibers and leather - Minimal whitening - Usable on a variety of materials including wood, stone, and paper, in addition to fibers and leather - Quick-drying, 5-10 minutes at room temperature *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Fluoropolymer FS-1600 series, a non-flammable type with ink (oil-based) resistance and long-lasting high liquid repellency. 【Purpose of Coating】 The inner surface of the container has been fluorine-coated to clearly indicate the remaining ink level in ink cartridges and oil-based pens. 【Challenges】 - Requires ink resistance (oil-based) and the ability to maintain liquid repellency over a long period. Other cases are also published! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The following two types of products have a proven track record for preventing the seepage of lubricating oil from the rotation axis of clocks. The "Fluorosurf FS-1610 Series" is a non-flammable solvent-based water and oil repellent treatment agent/oil barrier agent. It dries quickly, allowing for a short drying process, and its high oil repellency blocks the seepage of lubricating oil. The "Fluorosurf FS-6130 Series" is a water and alcohol-dilutable treatment agent that forms a fluororesin film by diluting it 10-30 times and allowing it to dry at room temperature. It is an environmentally friendly oil repellent as a measure against VOCs. Various film thicknesses can be accommodated depending on the application. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "FloroSurf FS-1610 Series" is a non-combustible solvent-based water and oil repellent treatment agent/oil barrier agent. It can be easily applied with a dispenser, and a strong oil-repellent film is formed through air drying at room temperature. The oil-resistant repellent film can block the diffusion of oil for an extended period. The film is a thin transparent layer, but a fluorescent dye model is also available for verification purposes. 【Implementation Examples】 - Prevention of lubricant leakage from HDD spindle motor rotating shafts - Prevention of lubricant diffusion from micro-motor fluid dynamic bearings - Prevention of solder flux wicking - Prevention of contamination of electrical contacts by silicone oil *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Anti-fouling coating refers to a treatment that protects products from dirt. Faucet fixtures can easily accumulate scale from water, making it difficult to remove. Even aesthetically pleasing faucets can be ruined by scale and fingerprint stains, which detracts from their design. However, by applying an anti-fouling coating, dirt can be easily removed, reducing the hassle of daily maintenance. 【Reasons to Choose FluoroSurf FG-5093】 ■ Dirt can be easily removed thanks to the effects of fluorine ■ Durability of over one year ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and dries at room temperature ■ Non-flammable and low-odor, ensuring safety during application ■ When effectiveness decreases, reapplication is simple for performance recovery Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

It can be easily applied with a transparent film, providing long-lasting (over one year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. FluoroSurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. By applying it, the adhesion of the surface molding resin is reduced, and a layer of fluorine compounds at the nanometer level exhibits excellent release properties even for complex and precise shapes. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Fluorine-based super hydrophobic coatings allow electrolytic liquids and water droplets to roll off at several angles, making them ideal for protecting printed circuit boards! 1. They repel liquids such as electrolytic fluid leaked from batteries, condensation, and rainwater that intrudes from the outside of equipment enclosures, providing strong protection for the circuit board. 2. The fluorine-based coating film has high moisture resistance and insulation properties, as well as resistance to acids and lithium battery electrolytes. Even if the super hydrophobic structure is damaged, the protective performance for the circuit board does not diminish. 3. Furthermore, FluoroSurf is non-flammable and legally classified as non-organic solvent. Its high safety allows for a significant reduction in management items related to hazardous materials under fire safety laws and organic solvents under occupational safety and health laws. This also minimizes capital investment. 4. Drying is completed at room temperature in just 5 minutes, with no heating process required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip resistance, and water and oil repellency by adding a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent to exhibit its functions, and the required addition amount is only about 1-3%, making it very economical. It also demonstrates effectiveness in enhancing abrasion resistance as it co-polymerizes and integrates with the components of the hard coat agent during UV irradiation. 【Features】 ■ Effective with an addition amount of 1-3% ■ Low oil and grease slip angle, excellent fingerprint removal properties ■ Three types available based on compatibility with hard coat agents *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

When FluoroSurf FG-5093 is applied to metal, it imparts a non-stick property to the surface. Non-stick means that tape, adhesives, and other dirt are less likely to stick and are easy to remove. When applied to cutting tools such as scissors, utility knives, and Thomson blades, adhesive tape and sticker residues do not stick to the blades, significantly improving work efficiency. Moreover, this property is durable, allowing it to maintain performance over an extended period. Additionally, the coating film is an ultra-thin film of about 10 nanometers, so it does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine allows for easy removal of dirt ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ When the effect diminishes, reapplication is simple for performance recovery Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

When FluoroSurf FG-5093 is applied to metal, it imparts non-stick properties to the surface. Non-stick means that tape, adhesives, and other dirt are less likely to stick and are easy to remove. For example, when applied to cutting tools such as scissors, utility knives, and blades, it prevents adhesive materials from sticking to the scissors during the cutting of adhesive tape or medical bandages, significantly improving work efficiency. Additionally, this performance is durable, allowing it to maintain its effectiveness over a long period. Moreover, the coating film is an extremely thin film of about 10 nanometers, so it does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine makes it easy to remove dirt ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ If the effect diminishes, it can be easily restored by reapplying a topcoat Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

Fluorine-based super hydrophobic coatings allow electrolytic liquids and water droplets to roll off at several angles, making them ideal for protecting printed circuit boards! 1. They can effectively repel liquids such as electrolytic fluid leaked from batteries, condensation water, and rainwater that intrudes from the outside of the equipment casing, providing strong protection for the circuit board. 2. The fluorine-based coating film has high moisture resistance and insulation properties, as well as resistance to acids and lithium battery electrolytes. Even if the super hydrophobic structure is damaged, its protective performance for the circuit board does not diminish. 3. Furthermore, FluoroSurf is non-flammable and legally classified as non-organic solvent. Its high safety allows for a significant reduction in management items related to hazardous materials under fire safety laws and organic solvents under occupational safety and health laws. This also minimizes capital investment. 4. Drying is completed at room temperature in just 5 minutes, and no heating process is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It has outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, the release agent components do not adhere to the molded products, eliminating the need for cleaning. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it to the mold with a brush or spray and allowing it to dry at room temperature for about 10 minutes, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release for thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. 【Features】 ■ Strongly adheres in reaction to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment and easy management *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

When FluoroSurf FG-5093 is applied to metal, it imparts non-stick properties to the surface. Non-stick means that tape, adhesives, and other contaminants are less likely to adhere and are easy to remove. When applied to semiconductor photomasks with a 1:1 scale, it becomes less likely for contaminants from photoresist to adhere. Moreover, this property is durable, allowing it to maintain its performance over a long period. Additionally, the coating film is an extremely thin layer of about 10 nanometers, so it does not cause any issues even if it adheres to the mask openings. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine allows for easy removal of contaminants ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ If the effect diminishes, simple reapplication restores performance Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

The fluorosurf FG-3650 series protective coating for electronic substrates exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It is non-flammable and classified as a non-hazardous material under fire safety laws. This eliminates the need for certification of hazardous material handling, quantity management, and explosion-proof equipment management. It is also not classified as an organic solvent under the Industrial Safety and Health Act, so there is no need for organic health checks for workers or regular environmental measurements at the site. *Currently, free samples are being offered. We sincerely apologize, but our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

• Coating Agent

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip resistance, and water and oil repellency by adding just a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent, exhibiting its functions, and the required addition amount is only about 1-3%, making it very economical. It also demonstrates effectiveness in enhancing abrasion resistance as it co-polymerizes and integrates with the components of the hard coat agent during UV irradiation. [Challenges] - To add to the hard coat agent to impart anti-fouling, slip resistance, and reduced refractive index functions. - To ensure that abrasion resistance is not compromised. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The conformal coating agent, Fluorosurf FG-3650 series, is specially designed for waterproofing and insulation protection of electronic components, as well as moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based coatings, and exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It can be applied using a dispenser or spray, and the application is completed in just 5-10 minutes with room temperature drying! It is non-flammable and not subject to fire safety laws, nor does it fall under the organic solvent regulations of the Industrial Safety and Health Act, significantly reducing on-site management items and equipment costs. Fluorine-based regulated substances (such as PFOS, PFOA, PFHxS) are not used. *We offer free samples to those who request them (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Anti-fouling coating refers to a treatment that protects products from dirt. It allows for easy removal of fingerprints, grease stains, and water spots. It helps reduce the hassle of daily maintenance. 【It is effective in the following cases】 ■ Want to easily remove fingerprints from surfaces ■ Aim to reduce cleaning time ■ Need a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are noticeable on stainless steel control panels and inner doors. ■ Improve the transmittance of films used on displays, prevent fingerprints, and enhance slip resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

FloroSurf FG-5093 is a metal anti-fouling coating agent. By applying it, functions such as water and oil repellency, anti-fouling, non-stick properties, and low friction are imparted to the metal surface. When applied to a metal mask, it becomes difficult for cream solder and various pastes to adhere to the edges of the openings, improving the release. This leads to stabilization of printing and can resolve solder shortages in narrow pitch patterns. The coating film bonds by reacting with the metal surface, providing wear resistance. Additionally, the film thickness is at the nanometer level, so it does not affect the pattern accuracy of the metal mask. Furthermore, the coating components do not peel off, ensuring that printing accuracy and solder components are not affected. Due to these advantages, there are proven results with metal masks in various fields. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of the molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability, with proven continuous release performance over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes, eliminating the need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce surface defects. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of printed circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to Choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

FloroSurf FG-5093 is a surface treatment agent (coating agent) that imparts anti-fouling properties to metal surfaces with a transparent thin film. It makes the removal of dirt, such as fingerprints and tape residue, easier, thus reducing the hassle of daily maintenance. * Since the anti-fouling components bond and react with the metal surface, the performance is maintained for a long period (over six months). * As it is a transparent thin film treatment agent, it does not alter the texture of the material. * Application is simple; just wipe with a cloth or sponge soaked in the coating liquid at room temperature. After application, leave it to air dry for about 10 minutes. * When performance begins to degrade, reapplication will restore its effectiveness. * It is non-flammable and low-odor, making the application safe. * For those who wish to receive a free sample, please include "Sample Request" in your inquiry.

• Coating Agent