We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Sensors.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Sensors Product List and Ranking from 1365 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Aug 19, 2026～Sep 15, 2026
This ranking is based on the number of page views on our site.

Sensors Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Aug 19, 2026～Sep 15, 2026
This ranking is based on the number of page views on our site.

  1. null/null
  2. シスコム（SysCom） Tokyo//Trading company/Wholesale
  3. HexaCORE Co., Ltd. (formerly Chuo Seisakusho Co., Ltd.) Head Office and Factory Miyagi//Industrial Electrical Equipment
  4. 4 センシリオン Kanagawa//Electronic Components and Semiconductors
  5. 5 MACOME CORPORATION NAGANO TOKYO OSAKA NAGOYA HIROSHIMA Nagano//Industrial Electrical Equipment
Go to Company Ranking

Sensors Product ranking

Last Updated： Aggregation Period:Aug 19, 2026～Sep 15, 2026
This ranking is based on the number of page views on our site.

  1. [Basic Knowledge of Humidity Measurement Presented] Ultra-thin Temperature and Humidity Flexible Sensor シスコム（SysCom）
  2. Fujibo "Resistance Change Type Flexible Load Sensor" *Under Development 富士紡ホールディングス 近未来商品開発統括部 (BtoBサイト担当部門)
  3. Clamp-on flow sensor "FD-H series"
  4. 4 Radar Level Sensor "FR Series"
  5. 5 PICLIA Piezo Cable Sensor - High Heat Resistance, High Sensitivity *Evaluation Kit DAIKIN FINETECH, LTD.

Sensors Product List

6031～6060 item / All 7843 items

Displayed results
RGB color sensor "CPS298AL"

RGB color sensor "CPS298AL"

Output the detection results as 16-bit digital values for each color! With the 4×8 ARRAY array, RGB light can be received uniformly.

The CPS298AL is an RGB color sensor that has sensitivity to Red (R), Green (G), and Blue (B), outputting detection results as 16-bit digital values for each color. With a 4×8 ARRAY configuration, it can uniformly receive RGB light. Adopting a compact and thin COB package (2.4mm×2.0mm×0.95mm), it is suitable for small modules. 【Features】 ■ Supports I2C interface ■ Continuous measurement of Red/Green/Blue/Infrared in sequence (receiving mode) ■ Built-in light-shielding receiving section allows output of only dark current components (dark mode) ■ Sensitivity adjustment possible by setting the integration time (1 to 65535) ■ Compact, thin package, surface mount COB-8PIN ■ Built-in infrared cut filter *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Illuminance sensor 'CPS295HW'

Illuminance sensor 'CPS295HW'

Improved visibility, extended light source lifespan, and reduced power consumption are possible! It supports a wide operating temperature range.

The CPS295HW is an analog current output type illuminance sensor that combines a photodiode with spectral sensitivity close to visual sensitivity and a current amplification circuit. By adjusting the brightness of light sources such as displays and controlling ON/OFF based on the illuminance output, it is possible to improve display visibility, extend the lifespan of the light source, and reduce power consumption. Additionally, it adopts a high-temperature resistant package, supporting a wide operating temperature range (-40°C to 105°C) compared to conventional products. 【Features】 ■ Wide operating temperature range (-40°C to 105°C) ■ Spectral sensitivity characteristics close to visual sensitivity ■ Current output proportional to ambient light illuminance ■ Minimal output dependency on the light source ■ Compatible with solder reflow and halogen-free *For more details, please refer to the PDF materials or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Illuminance Sensor (Digital) 'CPS303AT'

Illuminance Sensor (Digital) 'CPS303AT'

Compact and slim package! By performing ON/OFF control, it is possible to improve display visibility, extend the lifespan of the light source, and reduce power consumption.

The "CPS303AT" is a light sensor that incorporates a photodiode with spectral sensitivity close to human visual sensitivity, along with a current amplification circuit and a digital conversion circuit on the same chip. It outputs detection results as a 16-bit digital value via the I2C interface. By adjusting the brightness of light sources such as displays and controlling ON/OFF based on the illuminance output, it enables improved visibility, extended lifespan of the light source, and reduced power consumption. 【Features】 ■ Spectral sensitivity characteristics close to human visual sensitivity ■ Output characteristics proportional to ambient light illuminance ■ Minimal output dependency on the light source ■ I2C interface compatible ■ Shutdown function via software sleep ■ Flexible integration, timing, and resolution settings ■ Compatible with solder reflow, lead-free, RoHS, and halogen-free standards *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Matching service "Nadeshiko Nurse"

Matching service "Nadeshiko Nurse"

A service that matches nurses with workplaces.

"Nadeshiko Nurse" is a matching service that proposes a new way of working for nurses. The entire process from job selection to confirmation is smooth and completed using your smartphone. If you have any questions, you can consult via chat immediately. Additionally, after finishing a job, you can review the workplace from the customer's perspective. You can also earn points for writing reviews. 【Features】 ■ Specializing in one-time, spot, and part-time jobs ■ Register, apply, and confirm jobs via smartphone ■ Introduction to jobs that will surprise you ■ Evaluate the workplace with your own eyes ■ Feel free to ask questions via chat *For more details, please download the PDF or feel free to contact us.

  • Other IT tools
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Efficiently check only when it arrives in the mailbox: 'B's AI Mail Detection'

Efficiently check only when it arrives in the mailbox: 'B's AI Mail Detection'

It is a system that detects the opening and closing movement of the mailbox slot, notifies you in real-time when mail is deposited, and enhances the convenience of everyday life.

With a Wi-Fi environment, it can be easily installed with a small wireless device, and since it uses maintenance-free sensors with a battery life of 5 to over 10 years, it minimizes the burden on users while enhancing the convenience of everyday life.

  • Other image-related equipment
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Obstacle detection sensor MagicEye, the eyes for drones and UUVs.

Obstacle detection sensor MagicEye, the eyes for drones and UUVs.

It will serve as the eyes for drones and UUVs, detecting obstacles.

By equipping MagicEye on the tips of drones and UUVs, it enables the detection and avoidance of fishing nets underwater, unaffected by turbidity or conditions in the sea using ultrasound. This allows for safe exploration even on complex seabeds with undulations and objects. It enables the creation of seabed maps at speeds more than ten times faster than conventional methods.

  • Ultrasonic Oscillator
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermistor Sensor "EP3"

Thermistor Sensor "EP3"

Excellent thermal conductivity, suitable for use at high temperatures! Ideal for inverter and heat sink temperature detection, etc.

At Shibaura Electronics Co., Ltd., we handle the 'EP3', a glass-sealed thermistor connected to a lead frame. It offers high reliability and can be used over a wide temperature range. We support various screw-mounted cases and lead frames. Please feel free to contact us when you need assistance. 【Specifications (Excerpt)】 ■ Operating temperature range: -40 to +150℃ ■ Withstanding voltage: AC 600V for 1 second ■ Insulation resistance: DC 500V, 100MΩ or more *For more details, please refer to the PDF materials or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermistor Sensor "EP4"

Thermistor Sensor "EP4"

Based on EP1, the protective tube is adapted to meet needs! Suitable for evaporator temperature detection and more.

At Shibaura Electronics Co., Ltd., we handle the 'EP4', which is a glass-sealed thermistor encapsulated in a copper pipe. We offer a wide variety of protective tube options. It is highly reliable and can be used over a wide temperature range. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Operating temperature range: -30 to +105℃ ■ Voltage resistance: AC 1200V for 1 second ■ Insulation resistance: DC 500V, over 100 MΩ *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature sensor "RT2"

Temperature sensor "RT2"

Standard type with high-temperature screw fastening! Suitable for automotive inverters, water heater storage tanks, and more.

The "RT2" is a screw-mounted lug terminal temperature sensor designed with assembly considerations, featuring high heat resistance and high responsiveness. It can be used in a wide temperature range of -20 to +180°C. It is suitable for temperature detection in automotive inverters, hot water storage tanks, and heat pump water heaters. 【Specifications (excerpt)】 ■ Operating temperature range: -20 to +180°C ■ Dielectric strength: AC 1250V for 1 minute, or AC 1500V for 1 second ■ Insulation resistance: DC 500V, 100MΩ or more ■ Resistance value: R100 = 3.3kΩ (various characteristics can be accommodated) ■ B constant: B0/100 = 3970K (various characteristics can be accommodated) *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature sensor "EP2"

Temperature sensor "EP2"

Ideal for electric vehicle chargers, outdoor units of air conditioning equipment, and temperature detection of heat sinks!

The "EP2" is a screw-mounted type terminal temperature sensor that encapsulates a glass-sealed thermistor to a lug terminal. It can be used in a wide temperature range from -30 to +120°C. It is suitable for applications such as automotive chargers, outdoor units of air conditioning equipment, and temperature detection for heat sinks. 【Specifications (excerpt)】 ■ Operating temperature range: -30 to +120°C ■ Voltage resistance: AC 1200V for 1 second ■ Insulation resistance: DC 500V, over 100MΩ *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sensor for Burner 'ST1'

Sensor for Burner 'ST1'

Ideal for temperature detection in stove burner sections! Usable in a wide temperature range from -20 to +500℃.

The "ST1" is a standard sensor suitable for burners that can use heat-resistant glass-encapsulated thermistors. It can be used in a wide temperature range from -20 to +500°C. It is particularly suitable for temperature detection in stove burner sections. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Dielectric strength: AC 1200V for 1 second ■ Insulation resistance: DC 500V, over 100MΩ ■ Resistance value: R200 = 8kΩ (various characteristics can be accommodated) ■ B constant: B150/250 = 5300K (various characteristics can be accommodated) *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature sensor "KTM1"

Temperature sensor "KTM1"

Ideal for indoor and outdoor units of air conditioning equipment, pipe temperature detection, and dehumidifier temperature detection!

The "KTM1" is a temperature sensor that encapsulates a chip thermistor in a copper pipe. It is more affordable compared to our copper protection tube type. There is a wide variety of protection tube options available. Please feel free to contact us when you need assistance. 【Specifications (Excerpt)】 ■ Operating temperature range: -30 to +100℃ ■ Withstanding voltage: AC 1200V for 1 second ■ Insulation resistance: DC 500V, over 100MΩ ■ Resistance value: R25 = 10kΩ, R25 = 5kΩ (various characteristics can be accommodated) ■ B constant: B25/50 = 4100K, B25/50 = 3950K (various characteristics can be accommodated) *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature sensor "KT1"

Temperature sensor "KT1"

Ideal for detecting indoor and outdoor temperatures of air conditioning equipment, as well as fan heater temperature detection!

The "KT1" is a temperature sensor that seals a chip thermistor with epoxy resin. It can be used in a wide temperature range from -30 to +80°C. It is suitable for temperature detection in washing and drying machines, printers, and multifunction devices. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Operating temperature range: -30 to +80°C ■ Voltage resistance: AC 1200V for 1 second ■ Insulation resistance: DC 500V, over 100MΩ ■ Resistance value: R25 = 10kΩ, R25 = 5kΩ (various characteristics can be accommodated) ■ B constant: B25/50 = 4100K, B25/50 = 3950K (various characteristics can be accommodated) *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature sensor "KTEP1"

Temperature sensor "KTEP1"

Insulation-enhanced chip thermistor specifications! The sensing part uses aluminum.

The "KTEP1" is a screw-mounted terminal temperature sensor that encapsulates a chip thermistor in a lug terminal. It is more affordable compared to glass-encapsulated thermistor types. The wire is made of cross-linked polyethylene parallel wire / PVC parallel wire. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Operating temperature range: -30 to +85℃ ■ Thermal time constant: τ ≈ 20 seconds (aluminum heat plate) ■ Thermal dissipation constant: δ ≈ 5.5 mW/℃ ■ Withstand voltage: AC 1200V for 1 second ■ Insulation resistance: DC 500V 100 MΩ or more * For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermistor Sensor "NTN1"

Thermistor Sensor "NTN1"

It has excellent mechanical strength and moisture resistance because it contains a glass-sealed thermistor!

The "NTN1" is a standard type thermistor sensor with a nipple-equipped cutting protection tube. Dimensions are customizable. It features a glass-sealed thermistor inside a stainless steel protection tube, providing excellent mechanical strength and moisture resistance. The sensing part is made of stainless steel and brass. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Operating temperature range: -20 to +105℃ ■ Time constant: τ≓5 seconds (in stirred water) ■ Thermal dissipation constant: δ≓3.5mW/℃ ■ Dielectric strength: AC.1000V for 1 second ■ Insulation resistance: DC.500V 100MΩ or more *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature sensor "WT1"

Temperature sensor "WT1"

Using two glass-encapsulated thermistors with equivalent specifications! There is little difference in response performance between the thermistors.

The "WT1" is a temperature sensor equipped with control and abnormal monitoring backup functions. The sensing part is made of stainless steel, and the wire is cross-linked fluororubber wire. It uses two glass-sealed thermistors with equivalent specifications. Additionally, there is little difference in response performance between the thermistors. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Operating temperature range: 0 to +120℃ (excluding connector part) ■ Thermal time constant: τ = 1.2 seconds or less ■ 90% thermal response: approximately 2.5 seconds (in stirred water) ■ Thermal dissipation constant: when both thermistors are energized, δ ≈ 4.5 mW/℃ (in stirred water) ■ Dielectric strength: AC 750V for 1 second ■ Insulation resistance: DC 500V, 100 MΩ or more For more details, please visit our website.　https://www.shibauraelectronics.com

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Temperature Sensor "WT2"

Water Temperature Sensor "WT2"

High durability type, capable of covering various water temperature detection! Usable for water heaters and more.

The "WT2" is a standard temperature sensor for household appliances. It is a high-durability type that can cover various water temperature detection, with a usage temperature range of -20 to +120°C (excluding the connector part). Additionally, the sensing part is made of stainless steel, and the wire is cross-linked fluororubber wire. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Thermal time constant: τ = less than 1 second (in stirred water) ■ 90% thermal response: approximately 2 seconds (in stirred water) ■ Thermal dissipation constant: δ ≈ 4.8mW/°C (in stirred water) ■ Dielectric strength: AC 750V for 1 second ■ Insulation resistance: DC 500V, over 100MΩ For more details, please visit our website.　https://www.shibauraelectronics.com

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Temperature Sensor "WT5"

Water Temperature Sensor "WT5"

A product that minimizes variability in responsiveness! Used for water temperature detection in coffee makers and other devices.

The "WT5" is a type of water temperature sensor for home appliances designed to improve response performance. It is a product that minimizes variations in responsiveness, with a B constant of B0/100 = 3450K, making it compatible with various characteristics. Additionally, the operating temperature range is -20 to +120°C (excluding the connector part). Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Thermal time constant: τ = 0.9 seconds or less (in stirred water) ■ 90% thermal response: approximately 2 seconds (in stirred water) ■ Thermal dissipation constant: δ ≈ 4.8mW/°C (in stirred water) ■ Dielectric strength: AC 750V for 1 second ■ Insulation resistance: DC 500V, 100MΩ or more * For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Oven Sensor "OCK1-1"

Oven Sensor "OCK1-1"

Heat-resistant temperature of 300℃! It is exposed inside the oven to detect the temperature inside.

The "OCK1-1" is a world-standard oven sensor. Its features include a heat resistance temperature of 300°C, and it detects the temperature inside the oven by being exposed within the oven cavity. Additionally, the sensing part is made of stainless steel, and the wires are cross-linked polyethylene wire / silicone rubber wire / silicone rubber glass braided wire. 【Specifications (excerpt)】 ■ Operating temperature range: -20 to +300°C (from the tip of the protective tube to the flange) ■ Thermal time constant: τ ≈ 80 seconds ■ Thermal dissipation constant: δ ≈ 2.1 mW/° ■ Dielectric strength: AC 1200V for 1 second ■ Insulation resistance: DC 500V 100 MΩ or more *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Temperature sensor "RT1"

Temperature sensor "RT1"

Can be used for temperature detection in irons and IH cooking appliances! Operating temperature range is -10 to +250℃.

The "RT1" is a screw-mounted type temperature sensor with high response and high heat resistance. The sensing part is made of aluminum, and the wires are fluororesin wire/silicone rubber wire/silicone rubber glass braided wire. Additionally, the withstand voltage is AC 1200V for 1 second, and the insulation resistance is DC 500V with more than 100MΩ. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Time constant: τ ≈ 3 seconds (100℃ aluminum heat plate) ■ Thermal dissipation constant: δ ≈ 3mW/℃ ■ Resistance value: R150 = 3.161kΩ (various characteristics can be accommodated) ■ B constant: B100/200 = 4537K (various characteristics can be accommodated) *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermistor Sensor "KN3"

Thermistor Sensor "KN3"

The protective case uses ceramic, designed with consideration for insulation and ease of installation!

The "KN3" is a thermistor sensor with high insulation and high voltage resistance. In addition to being a high-response product, it features a ceramic protective case that considers insulation and ease of installation in its design. The operating temperature range is -20 to +300°C (only at the tip sensing surface), with a dielectric strength of AC 5000V for 1 second and an insulation resistance of DC 500V over 100MΩ. 【Features】 ■ Operating temperature range: -20 to +300°C (only at the tip sensing surface) ■ Thermal time constant: τ ≈ 1.2 seconds (100°C aluminum heat plate) ■ Thermal dissipation constant: δ ≈ 2mW/° ■ Resistance value: R100 = 3.3kΩ ■ B constant: B0/100 = 3970K *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermistor Sensor "KN4"

Thermistor Sensor "KN4"

High insulation and high voltage resistance! Usable for surface temperature detection in IH cookers, IH rice cookers, etc.

The "KN4" is a ceramic standard type thermistor sensor. It features a ceramic protective case, designed with consideration for insulation and ease of installation in a standard shape. Additionally, the sensing part is made of ceramic, and the wires are cross-linked polyethylene wire / silicone rubber glass braid wire / fluororesin wire / silicone rubber wire. 【Specifications (excerpt)】 ■ Operating temperature range: -20 to +300℃ (sensing surface only) ■ Thermal time constant: τ ≈ 7 seconds (100℃ aluminum heat plate) ■ Thermal dissipation constant: δ ≈ 3mW/℃ ■ Dielectric strength: AC 5000V for 1 second ■ Insulation resistance: DC 500V 100MΩ or more For more details, please visit our website.　https://www.shibauraelectronics.com

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Refrigerated freezer temperature sensor "LAS-604V2-UL"

Refrigerated freezer temperature sensor "LAS-604V2-UL"

LoRa-compatible probe-type temperature sensor suitable for ultra-low temperature measurement at -120°C.

In response to the growing demand for deep freezers (ultra-low temperature freezers) including the new coronavirus vaccine, the "LAS-604V2-UL" supports a wide range of temperature measurements from -120°C to 200°C. It is equipped with two built-in lithium batteries (2400mAh), which can support approximately 5 years of operation without battery replacement when transmitting measurement data once an hour. The "LAS series" aims to automate tasks such as temperature management, recording, and maintenance of refrigerators, which have traditionally been checked visually by humans, by optimizing costs and systems through the LoRa network. The "LAS series" regularly uploads environmental temperature data to a cloud server via the LoRa network (typically every hour in normal mode). The sensors continuously measure temperature at 5-minute intervals, and if the temperature goes outside the set range, an alarm is triggered and sent simultaneously to the pre-specified "phone number" and "email" via the cloud server, allowing for reliable and real-time awareness of any issues.

  • Other operation management software
  • Other PCs and OA equipment
  • Communications
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnet-type temperature and humidity sensor "LAS-603V2"

Magnet-type temperature and humidity sensor "LAS-603V2"

LoRa-compatible magnet-type temperature and humidity sensor. Easy installation automates management, recording, and maintenance tasks.

The "LAS-603V2" (Manufacturer: Kiwi Technology Inc) is capable of measuring temperature and humidity. It is equipped with three magnets on the bottom of the unit for easy installation on metal surfaces. It has two built-in lithium batteries (2400mAh) that support approximately three years of operation without battery replacement when transmitting measurement data once an hour. The "LAS series" has focused on temperature management in refrigerators, but we have received many requests to also integrate indoor temperature management and humidity control at the time of implementation. In particular, temperature and humidity management in hospitals is extremely important not only for preventing the growth of dust mites and mold but also for preventing and addressing infectious diseases, managing the quality of medical devices and pharmaceuticals, and ensuring safe medical care and nursing, which requires precision in management. Utilizing "LoRa," characterized by long-range and low power consumption, this "LAS series" aims to optimize costs and systems, automating tasks such as management, recording, and maintenance that have traditionally been performed through regular visual checks by personnel.

  • Other operation management software
  • Data Logger
  • Thermo-hygrometer
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-small vibration sensor "Acceleration Vibration Pickup"

Ultra-small vibration sensor "Acceleration Vibration Pickup"

Solving challenges in vibration measurement! Achieving improved accuracy and cost reduction by pursuing materials.

The "Accelerated Vibration Pickup" is a compact vibration pickup sensor that uses MEMS semiconductor accelerometers suitable for FA equipment and machine tools. By incorporating MEMS technology and using plastic resin in part of its shape, it has successfully achieved miniaturization and cost reduction. The housing design allows for the characteristics of the sensor element to be fully utilized. 【Features】 ■ Supports a measurement range close to that of typical piezoelectric sensors, up to 10kHz ■ Cost-effective due to the adoption of MEMS semiconductors ■ Housing design that fully utilizes the characteristics of the sensor element ■ Miniaturization achieved by combining plastic resin as a sealing material ■ Compact dimensions of φ16× height 19mm *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Other electronic parts
  • Other semiconductors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin-film pressure-sensitive sensor

Thin-film pressure-sensitive sensor

Can be integrated into various shapes with a thickness of 250μm or less! Achieves low cost through printing method production.

We offer a "thin film pressure sensor" that has the thinness and flexibility to be incorporated into narrow spaces and curved surfaces. It is produced using a film printing method, allowing for a continuously variable resistance value. Since it does not use semiconductors, the configuration of the pressure-sensitive area is minimized. Furthermore, it boasts excellent repeatability and enables stable sensing. 【Features】 ■ Produced using a film printing method ■ No semiconductors used, resulting in a minimal configuration of the pressure-sensitive area ■ Can be incorporated into various products, including narrow spaces and curved surfaces ■ The shape and arrangement of the sensor can be customized according to your requirements ■ Can always be refreshed as a consumable item *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Optical Touchless Sensor 'NJL5830R'

Optical Touchless Sensor 'NJL5830R'

Compact and slim, it can be integrated into button switches! Thanks to the optical modulation method, it can be used outdoors as well.

The NJL5830R is an optical touchless sensor with built-in interference prevention functionality, capable of being integrated with adjacent buttons. By making highly public devices touchless, it contributes to measures against bacterial infections and improves hygiene. It is a hybrid type that can be used in conjunction with push buttons, offering ease of integration into control panels and versatility to adapt to various scenes. 【Features】 - Compact and slim package (3.6×5.8×1.2mm) - Tolerance for ambient light: (10,000lux) - Built-in interference prevention function for adjacent sensors - Digital output (normally off type) - Lead-free reflow soldering compatible: 250℃, 1 time *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame sensor for heavy machinery “SKH086” Antec

Flame sensor for heavy machinery “SKH086” Antec

Detects ultraviolet rays in flames in as little as 0.5 seconds! High-performance flame sensor protects your employees and assets!

This is an arson detection sensor using ultraviolet detection methods. It excels in dustproof, heat resistance, and water resistance, making it suitable for use in harsh environments. It can detect ultraviolet rays contained in flames with high sensitivity, allowing for the prevention of fires before they occur. Since it can distinguish ultraviolet rays contained in sunlight, it can be used both indoors and outdoors.

  • Other safety equipment
  • Other safety and hygiene products
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"SKH089" Flame Sensor for Control Panel and Distribution Board ANTEC

"SKH089" Flame Sensor for Control Panel and Distribution Board ANTEC

Quickly detect sparks and ignition in control panels and distribution boards, the primary cause of factory fires! We will protect the employees and your assets!

This is a flame detection sensor for control panels and distribution boards. Did you know that many factory fires are caused by sparks inside distribution boards? It can be used simply by being mounted directly on a DIN rail, allowing for quick detection of ignition in control panels and distribution boards, thereby preventing fires before they occur. Due to its wide power supply specifications ranging from DC 12V to 30V, it can be installed in various locations. We support prompt fire prevention measures for your distribution boards.

  • Sensors
  • Other environmental equipment
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Moxa - Case Study in Lancaster, California

Moxa - Case Study in Lancaster, California

Aiming for a safe and sophisticated city, Lancaster. We will centralize traffic management.

We would like to introduce a case study of the City of Lancaster implementing Moxa's hardware and software solutions. The city has been taking measures to improve the lives of its citizens by utilizing smart technology. However, aging infrastructure was limiting operational efficiency. With this solution, the City of Lancaster will be able to fully utilize many modern Intelligent Transportation System (ITS) technologies, such as high-definition (HD) CCTV surveillance cameras and Advanced Transportation Controller (ATC) units. 【Case Overview】 ■ Products Implemented: Moxa products (including network management software "MXview") ■ Implementation Location: City of Lancaster, California ■ Background: Transforming urban transportation smartly using technology ■ Challenge: Aging infrastructure limiting operational efficiency ■ Future Outlook: Transformation into a future-oriented smart city *For more details, please refer to the PDF document or feel free to contact us.

  • 2..png
  • Communications
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.