We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Sensors.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Sensors Product List and Ranking from 1364 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Oct 07, 2026～Nov 03, 2026
This ranking is based on the number of page views on our site.

Sensors Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 07, 2026～Nov 03, 2026
This ranking is based on the number of page views on our site.

  1. null/null
  2. センシリオン Kanagawa//Electronic Components and Semiconductors
  3. MACOME CORPORATION NAGANO TOKYO OSAKA NAGOYA HIROSHIMA Nagano//Industrial Electrical Equipment
  4. 4 三協インタナショナル Tokyo//Trading company/Wholesale
  5. 5 KELLER Pressure Japan 日本支社 Tokyo//Machine elements and parts
Go to Company Ranking

Sensors Product ranking

Last Updated： Aggregation Period:Oct 07, 2026～Nov 03, 2026
This ranking is based on the number of page views on our site.

  1. Clamp-on flow sensor "FD-H series"
  2. Easy predictive and preventive maintenance! Wi-Fi vibration sensor *Demo units available for loan.
  3. Radar Level Sensor "FR Series"
  4. 4 水戸工業が提案するデータセンター向け製品 水戸工業
  5. 5 AI-equipped image sensor 'IV4 Series'

Sensors Product List

6061～6090 item / All 7805 items

Displayed results
Wandering Notification Tatsu-kun (Desktop Receiver) HS-WK(T)

Wandering Notification Tatsu-kun (Desktop Receiver) HS-WK(T)

A seat sensor is placed on the wheelchair and used while seated. When you get off (or fall from) the wheelchair, it will notify you with a flash and melody.

Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● The radio registration settings are pre-configured for immediate use. ● If a person gets off (or falls from) the wheelchair, the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as being inside a reinforced concrete building.) Seat Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) Dedicated Jack-equipped Transmitter HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wandering Notification Tatsu-kun (Portable Receiver) HS-WK(KE)

Wandering Notification Tatsu-kun (Portable Receiver) HS-WK(KE)

Use seat sensors placed on wheelchairs or chairs.

■Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● The radio registration settings have been pre-configured for immediate use. ● If the user gets off (or falls from) the wheelchair, the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as being inside a reinforced concrete building.) ■Seat Sensor - Everyday waterproof design ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● Dimensions: 330 × 330 × 6 mm ● Lead wire: 1m Kevlar wire cable (cream color/RCA plug included) ■Dedicated Jack-equipped Transmitter ■HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wandering Notification Sensor Kid Indoor/Outdoor Type HS-103

Wandering Notification Sensor Kid Indoor/Outdoor Type HS-103

We will notify your family 100 meters away. The tabletop receiver will alert with a flash and melody. The notification time can be adjusted.

■Quickly catch wandering elderly individuals ■Sensors installed near exits quickly detect the movements of wandering elderly individuals and notify you through a receiver set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering is detected, the receiver within 100 meters alerts you with a chime sound and lamp display. ■Installable anywhere without location restrictions ■The sensor is battery-operated, allowing installation in places without power supply. ■Additionally, it is wireless, eliminating the need for wiring work, and it is compact and unobtrusive. ■Receivers selectable according to purpose ●HC-350 (Tabletop receiver): ■This tabletop model can be used immediately by simply plugging the included AC adapter into an outlet. ■You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight. ■Notification duration can be selected from 3 seconds to 120 seconds in 7 different options, including "continuous." ■The transmission range of the transmitter is approximately 100 meters in line of sight.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wandering Notification Haruo-kun HCS-CS30(T)

Wandering Notification Haruo-kun HCS-CS30(T)

It is a sensor with two functions: "Wandering Notification" and "Emergency Call." It is easy to use; just clip it to something you want to be notified about when it is moved away.

■Operation ■The clip emergency sensor transmitter can be attached to items you want to be notified about when they are moved or separated. When the string is pulled, it sends a low-power radio signal to a receiver within 100 meters to alert you. ■Clip Emergency Sensor Transmitter 《Two Convenient Functions》 ●The call button on the main unit can be used for emergency or calling purposes. ●You can use it by clipping it onto items you want to be notified about when they are moved away. 《Easy Installation and Operation with Abundant Accessories》 ●You can use the included long and short clips and carabiners for various purposes. ●The transmitter can be easily mounted using the included double-sided tape or Velcro tape. 《With On/Off Switch》 ●It comes with an on/off switch for staff or family members. (The main unit's "call" button operates continuously regardless of the ON/OFF status.) ●The transmitter uses two AA alkaline batteries and can last for about 5 years (if transmitting 10 times a day). It has a low battery alert function. 《No Wiring Required》 ●The radio signal reach from the transmitter to the receiver is approximately 100 meters in line of sight. It can be easily installed in homes or facilities. ●The clip with the string has a safety feature that allows it to detach when a certain amount of force is applied.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Human Motion Sensor (Exposure Type) HM-1B

Human Motion Sensor (Exposure Type) HM-1B

Direct reflection method using near-infrared beams. It is a sensor that is not affected by temperature changes. It is suitable for installation in hallways and similar areas.

■Features ● Ideal for detecting movement for life safety alert systems. ● Designed for wall mounting. ● The area beam can be adjusted up to 1 meter with a single unit. ● Can be installed to avoid detecting pets like dogs and cats, making it suitable for pet-friendly use. ● It is a type that does not produce mechanical noise, making it suitable for installation in hallways. *Always connect the motion sensor to the receiver using an AND connection.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Toilet Sensor (Exposed Type) TS-7

Toilet Sensor (Exposed Type) TS-7

In case of emergency! We will notify you if the usage time is long. A sensor that measures distance reduces malfunctions caused by changes in the floor surface.

■Overview ■When used, the toilet sensor detects and outputs signals. ■It detects whether there is movement or if it is stationary. ■If used for a preset time (e.g., 10 minutes) set in advance on the toilet life safety alert device "SAH-2(T)", it will notify you in advance for 5 minutes with a lamp or buzzer. If you do not exit the toilet or press the reset switch during this time, it will notify family members or the management office. ■Distance Measurement ■Seven beams independently measure the distance to the floor and automatically set the detection output height for each. ■It detects the height from the floor. ■Area Setting Changes for the Head ■The sensor head can be adjusted in four stages from 0° to 9°. The area settings can be erased or changed in height, allowing a total of 9 patterns to be selected, including the basic settings, for installation in the toilet. Three Types to Choose From There are two exposed types and one embedded type available, allowing you to select a sensor that fits the installation location. ●TS-7 (Exposed Round Type) Main installation locations: Low ceiling areas, facilities for specific users (private rooms) Features: Exposed type with a small volume and surface area, dome-shaped. However, it has many black window surfaces. ●TS-7U (Embedded Type) Main installation locations: Newly constructed facilities

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Toilet Sensor (Exposed Square Type) TS-7R

Toilet Sensor (Exposed Square Type) TS-7R

If there are remaining individuals in the restroom of public or commercial facilities, it will be detected. It will notify of prolonged usage to prevent accidents or troubles in advance.

■ When the toilet is used, the toilet sensor detects it and outputs a signal. It detects whether someone is moving or stationary. If the toilet is used for a predetermined time (e.g., 10 minutes) set in advance on the toilet life safety notification device "SAH-2(T)," it will notify with a lamp or buzzer for 5 minutes beforehand. If the user does not exit the toilet or press the reset switch, it will notify family members or the management office. ■ Toilet-specific sensor Using unique technology, seven light axes independently recognize the distance from the floor to the toilet seat and automatically set the initial configuration. Of the seven, the central one and one behind it adjust the height of the area for the toilet seat and lid. ■ Notification of long-term use When connected to the toilet life safety notification device SAH-2(T), it will output a signal if the toilet is used for longer than the set time (usage detection: OFF, 5 seconds, 2, 3, 5, 7, 10, 12, 15, 20, 25, 30, 40, 50, 60, 90 minutes). Additionally, it has a system UP function that notifies in advance of the lamp or buzzer alert. ■ Installation locations It can be installed in public facilities such as department stores, supermarkets, train stations, libraries, art museums, museums, and schools.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Predictive Monitoring Sensor HC-MR1

Predictive Monitoring Sensor HC-MR1

By being able to detect signs of dangerous behavior in images, we can reduce the burden of caregiving and decrease the incidence of lighting accidents.

■Operation ● Detects the movements of users on the sensor bed in their room. ● Notifies staff on their "mobile devices." They can check the screen to determine the necessity and priority of visits. ● The detected data is sent to and stored on the "server PC" for integrated management. The detectable movements are the following seven types: 1. Rising up 2. Sitting on the edge 3. Overcoming the railing 4. Leaving the bed 5. Sliding down 6. Entering the room 7. Exiting ■Sensor Accurate image analysis with minimal false alarms ● The sensor can accurately recognize the human body from three-dimensional shapes. ● There is no performance degradation even in complete darkness during sleep. ■Features Check the room's status anytime ● Real-time video can be checked regardless of day or night. ● Users can be monitored without waking them during sleep. ● Privacy is protected due to silhouette images. ■Identification of accident causes and situation understanding ● The detection history during notifications (10 to 120 seconds before and after) can be checked to identify accident factors. ● 24-hour video recording (up to 3 beds simultaneously) allows for monitoring the movements of concerned users and visit situations.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Life Safety Sensor, Exposed Type, SA-750

Life Safety Sensor, Exposed Type, SA-750

This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human movement sensor for enhanced living safety notifications!

■Life Safety Sensor This is a dedicated sensor for the 'Life Safety Notification System,' which integrates a "human movement sensor" with the time function of a "life safety notifier." It detects human movement through a passive sensor, and if no movement is detected within a pre-set timer duration, it alerts to a change in daily rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Ceiling-Mounted and Recessed It is installed on the ceiling surface of corridors and living rooms used in daily life. With an elegant design reminiscent of downlights, both the ceiling-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Alert Function If no human movement is detected within the set time, a pre-alert output will occur 5 minutes prior. By connecting a buzzer or light, the system can be effectively utilized.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Life Safety Sensor Embedded Type SA-750U

Life Safety Sensor Embedded Type SA-750U

This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human motion sensor for enhanced living safety notifications!

■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within a pre-set timer, it alerts to an abnormality in the living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, 24 hours). ■Two Types: Ceiling-Mounted and Recessed It is installed on the ceiling surfaces of corridors and living spaces used in daily life. With a sophisticated design reminiscent of downlights, both the ceiling-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output occurs 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Twin Mirror Type Passive Sensor PA-6614WA

Twin Mirror Type Passive Sensor PA-6614WA

A twin mirror system that forms a unique surveillance area.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. The output will stop once the obstruction or prank is no longer present, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● The anti-blind function should be monitored 24 hours a day. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. ● The anti-blind function detects malicious interference aimed at the sensor. * Transparent sprays or items with low near-infrared reflectivity may not be detectable. ■Tamper Function This function monitors the installation status of the sensor to detect malicious interference. If the sensor is removed or is in an improperly installed state, a tamper alarm will be triggered to issue a warning. The output will stop once the sensor is properly installed again, but if a tamper alarm has been triggered, please immediately check the operation of the sensor.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type PA-6812WA

Passive Sensor 3D Surveillance Type PA-6812WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it issues a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output stops, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. * Transparent sprays or items with low near-infrared reflectivity may not be detectable. Wide Base Design ● By widening the base (Φ150mm), the issue of visible dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during monitoring by the blinking and illumination of the memory indicator light (yellow). ● The memory indicator light blinks for 3 minutes after the alarm is triggered, then continues to illuminate for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type PA-6812W

Passive Sensor 3D Surveillance Type PA-6812W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base (Φ150mm), the issue of visible dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during monitoring through the flashing and lighting of the memory indicator light (yellow). ● The memory indicator light flashes for 3 minutes after the alarm, then continues to light continuously for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method is adopted for attaching and detaching the sensor unit and base unit, allowing for safe and smooth operation at heights with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light that is convenient for operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6812B(BL)

Passive Sensor PA-6812B(BL)

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows for the use of smaller power supplies than before, enabling cost reduction. Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Wiring resistance does not significantly affect voltage drop, allowing for material selection and long-distance wiring without much concern. Suitable for renovations as well. Black color lineup for all warning-type models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums/art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). The visibility and sensitivity of the LED are equivalent to the white version. Unique Warning Area Configuration Our unique optical technology creates a sharp warning area, providing effective detection performance regardless of area settings with a movable mirror. Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for one-touch operation, making the work smooth and efficient.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type for 5m - PA-6705

Passive Sensor Spot Surveillance Type for 5m - PA-6705

Standard passive sensor equipped with an auto-reset memory function.

■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during standby by the blinking or lighting of the memory indicator (yellow). ● The memory indicator blinks for 3 minutes after the alarm is triggered, then continues to light continuously for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Easy Sensitivity Adjustment Function Sensitivity settings can be adjusted in four levels by switching the mode selector. Security can be performed at the optimal sensitivity according to the installation location. ● Adjustment range: 60%・80%・100%・120% ■Device Abnormality Alarm Function In the unlikely event that there is damage or disconnection in the internal circuit or connection parts of the sensor, it will notify you of the abnormality with continuous alarm output and continuous lighting of the alarm indicator. ■Reliable Design Resistant to Radio Interference Effective measures have been taken in circuit design and mechanical design against electrical noise coming from the line and noise transmitted through the air. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easy.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type for 20m PA-5020F

Passive Sensor 3D Surveillance Type for 20m PA-5020F

Wide-area surveillance passive sensor that controls various functions with a CPU.

■Dual Twin Element + CPU The CPU intelligently controls detection functions, alarm memory functions, and more. ■Ideal for Use in Harsh Installation Conditions Even in the presence of phenomena that are likely to cause malfunctions, such as small animals (mice, dogs, cats, etc.), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■ASC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the intruder's body temperature. No sensitivity adjustments are needed for each season. ■Reliable Design Resistant to Radio Interference By adopting a unique N.E. method (Noise Eliminator) in circuit and mechanical design, we effectively counter electrical noise entering from the line and noise propagating through the air. ■Ideal Surveillance Area Utilizing unique optical technology and employing a multi-parabola mirror, we have achieved an ideal surveillance area. It monitors three-dimensional space with high density and efficiency. ■Easy Area Setting The sensor unit is equipped with an area selector and area setting table on the back, making it easy to set the surveillance area.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type for 12m PA-8012

Passive Sensor 3D Surveillance Type for 12m PA-8012

Passive sensor that intelligently controls various functions.

■Optimal for use under harsh installation conditions Even when phenomena that are likely to cause malfunctions occur, such as small animals (mice, dogs, cats), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■SC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the body temperature of intruders. ■Reliable design resistant to radio interference By adopting a unique N.E. (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Alarm Memory Function By adding control contacts externally to the sensor, the triggered sensor can be confirmed by the illumination of the indicator light. ■Alarm Indicator Light Control By adding control contacts externally to the sensor, the ON/OFF of the indicator light can be remotely operated. *It can also be controlled by a switch inside the sensor. ■Trustworthy and user-friendly design ● Low power consumption of 15mA when using DC12V. ● Equipped with a targeting area adjustment function that allows visual confirmation of the area.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-altitude installation passive sensor, three-dimensional surveillance type, PA-8410

High-altitude installation passive sensor, three-dimensional surveillance type, PA-8410

Due to its unique high-density alert area, it can be installed in high places such as atriums and lobbies.

■Unique security area that can be installed at high locations This sensor can provide security from high places, which was difficult with conventional sensors. Its unique high-density security area allows for installation at heights of 4m to 8m. The high-density security area, composed of four reflective mirrors, can be used in spaces with high ceilings such as atriums and event spaces, as well as under eaves in truck yards. ■Can be installed indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables security in places where near-infrared beam sensors cannot be installed. ■Robust housing case It uses an AES resin housing case, improving impact resistance and weather resistance. This reduces the risk of damage in places like gymnasiums where ball games are played. ■Rainproof structure Even in areas where wind and rain can be severe, such as under building eaves, its excellent weather-resistant sealing structure prevents water intrusion. (When performing exposed wiring, please use the included waterproof bushing or conduit for wiring.)

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-4810A

Passive Sensor PA-4810A

Passive sensor for wall and corner mounting using fuzzy theory.

■Adoption of Fuzzy Theory The two outputs from the newly developed dual twin element are divided into two pieces of information: the temperature difference and shape difference between the detection object and the background, which are detected by the CPU. Using fuzzy theory, it accurately determines whether the detection object is a human or a small animal and outputs an alarm. Even if phenomena that are likely to cause malfunctions, such as small animals (like mice), stray light, drafts, and external noise occur, the dual twin effect ensures that there is almost no impact. ■Ideal Surveillance Area A multi-parabolic mirror utilizing unique optical technology is adopted. It monitors three-dimensional space with high density. ■Abnormal Alarm Function While the sensor is in a surveillance state, the built-in program allows the sensor itself to monitor the next functions. If an abnormality is detected, it notifies the user through continuous alarm output and the continuous illumination of the alarm indicator light. ●Low Power Voltage Abnormality… The newly developed CPU constantly monitors the power voltage supplied to the sensor. If the power voltage drops below a certain level, an abnormal alarm is triggered. ●Device Abnormality… In the unlikely event that there is damage or disconnection in the internal circuits or connections of the sensor, an abnormal alarm will also be triggered. ●Aiming Position Abnormality… After confirming the surveillance area, if the aiming device is forgotten to be returned, an abnormal alarm will be triggered.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type PA-350

Passive Sensor 3D Surveillance Type PA-350

Compact and high-performance passive sensor for upper wall corners.

■High reliability achieved with newly developed CPU The CPU built into the sensor accurately controls detection and counting functions. ■Ideal surveillance area An additional surveillance area is added directly beneath the sensor, achieving a high-density surveillance area without dead zones (insensitive zones). ■Reliable design resistant to radio interference Effective measures are taken against electrical noise coming from the line and noise propagating through the air through circuit and mechanical design. ■Simplified surveillance area settings The angle of the surveillance area can be easily adjusted by sliding the detection unit. ■Count setting switch A built-in count setting switch allows for switching between 2 counts and 4 counts according to the installation location and purpose of use. ■User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation (can be turned off permanently with a switch). ● Terminal connection type for convenient wiring. ● Simple and smart design.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Passive Type Far Infrared Surface Surveillance Type PA-360

Passive Sensor Passive Type Far Infrared Surface Surveillance Type PA-360

Compact and high-performance passive sensor for upper wall corners.

High reliability achieved with newly developed CPU The CPU built into the sensor accurately controls detection and counting functions. Ideal surveillance area An additional surveillance area is added directly beneath the sensor, creating a high-density surveillance area without dead zones (areas of no detection). Reliable design resistant to radio interference Effective measures are taken against electrical noise entering from the line and noise propagating through the air, through circuit and mechanical design. Simplified surveillance area settings The angle of the surveillance area can be easily adjusted by sliding the detection unit. User-friendly design ● Equipped with an operational indicator light for convenient operation confirmation (can be turned off at all times with a switch). ● Terminal connection type for convenient wiring. ● Simple and smart design.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Infrared Type Spot Surveillance Model PA-650

Passive Sensor Infrared Type Spot Surveillance Model PA-650

Passive sensor for mounting on door frames and small walls, ideal for monitoring entrances, exits, and corridors.

■Ideal for Spot Surveillance This is a passive sensor for spot surveillance, installed at the doorways and small wall sections to catch intruders. ■Switchable Surveillance Areas The area can be switched between wide and narrow according to the entrance size. *Wide Area: Width 2.4m (at height 3m) *Narrow Area: Width 1.2m (at height 3m) The depth area can also be adjusted at an angle between 5° and 25° from vertical. ■Convenient Features and User-Friendly Design ● Built-in adjustment volume for easy sensitivity settings ● Wide range of power supply voltage (DC 10.5V to 30V) ● LED for operation confirmation (Green LED lights up during alarm) ● Simple and smart design that fits the front mask.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor PIR-T15W(BL)

Outdoor/Indoor Passive Sensor PIR-T15W(BL)

Outdoor and indoor passive sensor that significantly reduces missed reports and malfunctions with its unique triple mirror system and signal processing method.

■Triple mirror sensor that forms a unique area Equipped with three sets of optical unit systems. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical unit systems significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles an outdoor light and incorporates internal area adjustment (movable mirrors), making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of malfunctions caused by small animals By adopting independent detection units for each mirror, signal processing reduces malfunctions caused by small animals such as cats. Furthermore, by using the pet mode (only for three-dimensional monitoring), it can also cancel out medium-sized dogs (approximately 50 cm in height), allowing for operation in homes with pets. Additionally, by attaching a bird stopper to the top, it becomes harder for birds to perch, significantly reducing unexpected malfunctions.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor MS-12T-N

Outdoor/Indoor Passive Sensor MS-12T-N

Reduced false alarms through AND detection in two directions: horizontal area and downward area! This enables more stable security outdoors.

■ Adoption of 2-direction AND detection for horizontal area and downward area The detection method outputs a detection signal only when both the horizontal area and downward area detect something, which reduces false triggers caused by small animals like dogs and cats, as well as false triggers due to excessive detection area extension, enabling more stable security outdoors. ■ Outdoor installation possible It has a rainproof structure, allowing for outdoor installation. It can be mounted on walls and poles, so it does not limit installation locations. (Additional mounting brackets are required for pole installation.) ■ Day/night discrimination function Equipped with a day/night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Adjustable from approximately 10lx to infinity) ■ Sensitivity adjustment volume It has a built-in sensitivity adjustment volume that allows for fine-tuning of sensitivity according to the installation environment, application, and operating conditions. The sensitivity for detecting human bodies can be adjusted within a range of approximately 30% to 170%. ■ Convenient features and user-friendly design ● The power supply voltage ranges from 10.5 to 30V (no polarity). ● It has a count switching function that allows for changing the number of sensor counts (1 time/3 times). ● There is a tamper output on the main unit. ● It includes an operation indicator light for convenient operation confirmation (red LED).

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor passive sensor with freely adjustable angles.

■Can be installed outdoors and semi-outdoors Due to its rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, allowing for flexible installation locations. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, enabling a neat installation. ■Fits well with exteriors With a novel design that has never been seen before, it perfectly fits into exterior coordination. Its smart design matches well in various locations, whether indoors or outdoors. ■Supports simple outdoor security This passive sensor can meet the needs for simple security in places where near-infrared beam sensors cannot be installed or where exterior design is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can now be adjusted up and down, left and right with just one touch. ■User-friendly design ● Equipped with an operation indicator lamp for convenient operation confirmation. (Lights up when detecting) ● Three types of options for flexible installation. ● Wide detection area (three-dimensional detection type 15m x 15m, linear detection type 30m)

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor Near-infrared type PB-10NS

Ultra-compact infrared sensor Near-infrared type PB-10NS

Ultra-compact infrared sensor of 1-beam type that can be installed in minimal space.

■Ideal for security around CD/ATM corners and windows/corridors This device can be used for various purposes, including detecting residual individuals near financial institution CD/ATM machines, securing areas around electric shutters, and detecting passing objects near windows, corridors, toilets, and doors, as well as for integration into HA equipment. ■Ultra-compact control box The control box measures W:45mm H:120mm D:29mm, making it ultra-compact. It can be installed in various locations with minimal space. ■Two types in a series: opposing type and reflective type To accommodate various applications, we offer two types in a series: opposing type (for 10m) and reflective type (for 4m). You can choose the model according to your needs. ■User-friendly design ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance. ● Switchable a contact/b contact. ● The sensor head uses a one-touch installation type that can be mounted simply by drilling a hole and pushing it in. ● Both the projector and receiver can have their connecting cables cut to the necessary length, allowing for tidy wiring without the need to bundle them near the amplifier section.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor, near-infrared type, PB-4RNS

Ultra-compact infrared sensor, near-infrared type, PB-4RNS

Ultra-compact infrared sensor of 1-beam type that can be installed in minimal space.

■Ideal for security around CD/ATM corners and windows/corridors This device can be used for detecting residual individuals near financial institution CD/ATM machines, securing areas around electric shutters, and detecting passing objects near windows, corridors, toilets, and doors, making it suitable for a wide range of applications. ■Ultra-compact control box With dimensions of W:45mm H:120mm D:29mm, the control box is ultra-compact, allowing for installation in tight spaces without being location-specific. ■Two types in a series: opposing type and reflective type To accommodate various applications, two types have been developed in a series: opposing type (for 10m) and reflective type (for 4m). You can choose the model based on your specific needs. ■User-friendly design ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment according to installation distance. ● Switchable a contact/b contact. ● The sensor head uses a one-touch installation type that can be mounted simply by drilling a hole and pushing it in. ● Both the projector and receiver can have their connection cables cut to the necessary length, allowing for tidy wiring without the need to bundle them near the amplifier section.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor, near-infrared type, PB-10TNS

Ultra-compact infrared sensor, near-infrared type, PB-10TNS

A two-beam type ultra-compact infrared sensor that adopts a scanning method to prevent mutual interference.

■Realization of miniaturization of the control box section Achieved miniaturization of the control box section with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations with minimal space. ■Series of two models: opposing type and reflective type To accommodate various applications, two models have been developed: the opposing type (for 10m) and the reflective type (for 4m). You can choose the model according to your needs. ■Prevention of mutual interference with scanning two beams The infrared light is scanned, preventing mutual interference of the infrared signals. ■AND/OR detection switching function Equipped with an AND/OR detection switching function, it can also be used as a single beam. Initially, it can be used as a single beam, and if necessary, it can be upgraded to a double beam by adding a sensor head. ■Thin sensor head section with one-touch installation type The sensor head section adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in. ■User-friendly design ● Comes with a sensitivity adjustment volume that allows adjustment of the sensor's sensitivity according to the installation distance. ● The connection cables for both the emitting and receiving sections can be freely cut.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor Near-infrared type (opposing type) PB-6Sa

Ultra-compact infrared sensor Near-infrared type (opposing type) PB-6Sa

A super compact infrared sensor with a miniaturized amplifier section and freely detachable connection cable.

■Ideal for security at CD and ATM corners, windows, and aisles The PB-6Sa/6Sb is an ultra-compact opposing infrared sensor with a separated amplifier section, making the exposed part only the sensor head (diameter 15mm), allowing for unobtrusive security of CD and ATM machines. It can also be used for detecting passing objects at windows, aisles, doors, and for integration into HA equipment, making it suitable for a wide range of applications. ■Achieves miniaturization of the amplifier section The amplifier section has been miniaturized to W: 45mm H: 94mm D: 29mm. Additionally, its volume has been reduced by 40% compared to our conventional products, allowing for flexible installation options. ■Cuttable connection cables Depending on the installation location, both the transmitter and receiver connection cables can be cut to the required length, eliminating the need to bundle them near the amplifier section and allowing for neat wiring. ■User-friendly design ● The sensor head can be easily installed using a one-touch mounting method by simply drilling a 12mm hole and pushing it in. ● It features a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor Near-infrared beam interruption type PR-11BE

Infrared sensor Near-infrared beam interruption type PR-11BE

Outdoor/indoor mountable one-sided wiring reflective infrared sensor.

■ Convenient one-sided wiring It can be used with one-sided wiring, making it suitable for locations where dual-sided wiring is difficult. Since the light-emitting and light-receiving parts are integrated into a reflective sensor, the wiring work only involves the sensor body. Additionally, maintenance is hassle-free. ■ Installable both outdoors and indoors The installation location is not limited to outdoors or indoors. Two types of attenuation sheets for light axis adjustment are included, one for outdoor use and one for indoor use. Mounting hardware for poles is also included as standard. (Compatible poles: φ38 to φ45mm) ■ Easy light axis adjustment Light axis adjustment can be done at just one location on the sensor. The adjustment is performed using a sighting device, the included attenuation sheet, and the light-receiving sensitivity indicator lamp. ■ Excellent disturbance light characteristics By adopting a special filter that efficiently cuts visible light and enhancing the disturbance light compensation circuit, it is unaffected by changes in illumination of up to 50,000 lux. Influences from sunlight, mercury lamps, fluorescent lights, and car headlights are not a problem under normal usage conditions. ■ Freely adjustable monitoring direction The lens section can be moved horizontally (±90°) and vertically (±10°), allowing for flexible setting of the monitoring direction, which does not limit the installation location and expands its applications.

  • Other security and surveillance systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.