We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Testing Machine.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Testing Machine Product List and Ranking from 760 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.

Testing Machine Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.

  1. 東洋精機製作所 Tokyo//Testing, Analysis and Measurement
  2. 東京衡機試験機 Kanagawa//Testing, Analysis and Measurement
  3. 日本ビジネスロジスティクス（JBL） 藤沢北事業所 Kanagawa//Testing, Analysis and Measurement
  4. 4 アイ・ティー・エス・ジャパン Chiba//Testing, Analysis and Measurement
  5. 5 null/null
Go to Company Ranking

Testing Machine Product ranking

Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.

  1. Extended warranty service "HP Care Pack" 日本HP
  2. Hydraulic Universal Testing Machine 'AY-S5/D5'/'YU-S5/D5' Series 東京衡機試験機
  3. Sealing Strength and Burst Strength Tester "Seal Tester FKT-100-J" サン科学
  4. 4 Flat Bending Fatigue Testing Machine 'PBF-30Xb/PBF-60Xb' 東京衡機試験機
  5. 5 Contract testing for small high center of gravity moment of inertia measurement.

Testing Machine Product List

151～180 item / All 3587 items

Displayed results
Tribosoft

Tribosoft

Data analysis and management made easy! Control of Tribogear is also possible.

"TriboSoft" is a general-purpose friction and wear analysis software that allows you to measure and analyze tribological data using mouse operations. In addition to automatic calculations of the friction coefficient and friction resistance, it is possible to graphically compare characteristics through overlaying graphs. It also supports friction tests using reciprocating motion and allows you to extract data in real-time for each reciprocation during measurement. 【Product Overview】 ■ Set Contents: Data analysis software, A/D converter (built into the main unit), USB cable ■ Operating Environment OS: Windows 10, Windows 8, Windows 7 ■ Communication Port: USB port *For more details, please download the PDF or feel free to contact us.

  • Software (middle, driver, security, etc.)
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Compact and excellent handling catheter simple bending durability testing device

Compact and excellent handling catheter simple bending durability testing device

Catheter bending durability testing device with excellent handling properties.

Protech's "Catheter Simple Bending Durability Testing Device" is a compact, easy-to-handle, and affordable device. It measures 200mm in width, 300mm in depth, and 300mm in height, weighing 8.5kg. It starts with the press of a switch, making it easy to operate. It can simultaneously test multiple catheters and short samples, providing stable bending deformation using a template.

  • Torque Meter
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Capable of measuring even minute torque! 【Guide Wire Transmission Characteristic Evaluation Testing Machine】

Capable of measuring even minute torque! 【Guide Wire Transmission Characteristic Evaluation Testing Machine】

Measure the micro-torque and angle transmission characteristics of guide wires and catheters without loss!

Protech's "Guide Wire Transmission Characteristics Evaluation Tester" allows for the measurement of minute torque characteristics at the tip of micro guide wires and catheters, which have traditionally been difficult to measure, as well as the angle transmission characteristics of input and output. With the adoption of a full posture air bearing, it is capable of measuring torque below 1mNm, with a measurement resolution of 0.01mNm. Measurement data is displayed in real-time as graphs on a PC screen, and data can also be saved in CSV file format. It is suitable for the automation and data collection of tests. Additionally, through the application of this testing machine, it is also possible to measure the sliding stress of catheters and the breaking characteristics of guide wire tips. There are also various options available, including jigs for connecting guide wires and sensors, measurement templates (vascular models) compliant with ASTM standards, and stands for securing sensors and templates.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Measuring tensile and compressive stress!】Small universal testing machine PU-100

【Measuring tensile and compressive stress!】Small universal testing machine PU-100

Measuring and analyzing tensile and compressive stresses of component parts such as machinery and medical devices!

The Protech "Compact Universal Testing Machine PU-100" can measure the "tensile stress" and "compressive stress" of various component parts such as machinery and medical devices. With a wide range of load cell variations, we offer control methods suitable for a diverse array of test components. Additionally, by replacing the load cell with a torque sensor, it is also possible to measure "torsional stress (torque)."

  • Torque Meter
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Testing possible in warm water close to the internal environment! 'Guide Wire Friction Sliding Testing Machine'

Testing possible in warm water close to the internal environment! 'Guide Wire Friction Sliding Testing Machine'

Measuring the frictional force of guidewires and catheters! Equipped with a warm water tank, allowing tests to be conducted in warm water that closely resembles the internal environment!

Protech's "Guide Wire Friction Sliding Tester" allows for testing by applying friction to guide wires and catheters by sliding a friction plate at a constant speed. Equipped with a warm water tank, it enables testing in water maintained at a constant temperature (room temperature to 40 degrees ±2 degrees). This allows for testing in conditions close to the internal environment of the body. Measurement results are displayed in real-time as graphs on a PC, and measurement data can be saved in CSV file format. Additionally, parameters can be set arbitrarily. It is capable of conducting 500 durability reciprocating tests.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Testing machine "SDC Screw Performance Testing Machine"

Testing machine "SDC Screw Performance Testing Machine"

The development of new materials for fastened components is intensifying. The screw performance testing machine is also evolving.

This device is a screw performance testing machine that was developed and put into practical use under the guidance of Professor Kazuo Maruyama, Honorary Professor at Tokyo Institute of Technology, based on National Patent No. 1782597, with the aim of efficiently conducting performance tests on screws. It can continuously perform tests from tightening to external force loading under computer control. It is capable of conducting extensive tests not only on plastic region fastening but also on general screw fastening and rivet fastening, making it widely useful for research, development, and quality control of screw and rivet fastening, as well as for surface treatments such as plating and the selection of lubricants. 【Features】 ○ National patent technology ○ Comprehensive functionality ○ Speeding up measurements For more details, please contact us or download the catalog.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Form Compression Permanent Deformation Tester

Form Compression Permanent Deformation Tester

Form Compression Permanent Deformation Tester

It is made of aluminum, lightweight, and easy to handle.

  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic Hardness Tester for Forms AF-400 Series

Automatic Hardness Tester for Forms AF-400 Series

The AF series automatic hardness tester for forms has undergone a full model change.

The AF-400 series automatic hardness tester for foam is an automatic hardness testing machine for soft polyurethane foam and various plastic foams used in vehicle seats, furniture, bedding, and other cushioning materials. In addition to conventional hardness testing methods and deflection testing methods, it now also supports JIS K 6400-2 hardness testing methods A and B. For more details, please contact us or refer to the catalog.

  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rebound Elasticity Testing Machine Model RT-90

Rebound Elasticity Testing Machine Model RT-90

Shore-type rebound elasticity testing machine compliant with JIS K 6255:2013

This is a space-saving, compact tabletop model. It allows for digital display of measurement data and external output. A pendulum strikes the test specimen, and the rebound angle of the pendulum, determined by the specimen's rebound force, is used to calculate the rebound elasticity modulus. For more details, please contact us or refer to the catalog.

  • Testing Equipment and Devices
  • Other physicochemical equipment
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Desk-type passive vibration isolation table "OS FLOAT DESK series"

Desk-type passive vibration isolation table "OS FLOAT DESK series"

For precision inspection/measurement devices! We offer a variety of types tailored to your installation environment.

In the field of inspection and measurement, there is an increasing demand for efficiency and speed, and technology that can quickly eliminate vibrations, which are disturbances, is required. To accurately meet this demand, the patented "OS FLOAT DESK series" exhibits excellent vibration isolation performance. Additionally, we offer a variety of types tailored to our customers' installation environments. Our products reliably support advanced tasks such as high-resolution inspection and observation. 【Features】 ■ Exhibits excellent vibration isolation performance ■ A lineup tailored to the installation environment ■ Custom specifications can be designed according to application needs ■ Achieves ultra-low natural frequency through a high-performance SSR vibration isolation mechanism *For more details, please refer to the PDF document or feel free to contact us.

  • Other process controls
  • Vibration Monitoring
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Passive Vibration Isolation Table "OS FLOAT TABLE Series"

Tabletop Passive Vibration Isolation Table "OS FLOAT TABLE Series"

Thinner and simpler! Design changes to match your desired size and load capacity are easy!

If you demand excessive vibration isolation performance, it becomes too wobbly and difficult to use, while on the other hand, if you add too much damping, the vibration isolation performance is compromised. The "OS FLOAT TABLE series" is designed to optimally set the balance between vibration insulation and damping, ensuring ease of use and appropriate levels of vibration isolation effect. There are two types of air supply methods available: an automatic leveling system that supplies air automatically and a manual supply system using a hand pump. 【Features】 ■ Design focused on ease of use ■ Excellent vibration isolation performance ■ Industry-leading thin design ■ Custom specifications can be modified according to application *For more details, please refer to the PDF materials or feel free to contact us.

  • Vibration Monitoring
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dedicated spring pad unit for building multi air conditioners 'SPU-A'

Dedicated spring pad unit for building multi air conditioners 'SPU-A'

Significantly improved workability! It can accommodate both steel and concrete foundations!

The "SPU-A" is a spring pad unit specifically designed for multi air conditioners in buildings, eliminating the hassle of misalignment and detachment during installation. It allows for secure fixing through proper placement before the equipment is mounted, reducing mistakes caused by installation position and number of units. Additionally, the seismic strength is improved with a steel foundation installation, providing a wider contact surface for the equipment's legs to prevent deformation and distortion. 【Features】 ■ Eliminates the hassle of misalignment and detachment during installation ■ Allows for secure fixing through proper placement before equipment mounting ■ Reduces mistakes caused by installation position and number of units ■ Improves seismic strength with steel foundation installation ■ Provides a wide contact surface for the equipment's legs to prevent deformation and distortion ■ Compatible with both steel and concrete foundations *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration Monitoring
  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic-resistant hardware "Damping Kachitto KCT type"

Seismic-resistant hardware "Damping Kachitto KCT type"

Easily installed just by inserting! Ceiling-mounted air conditioner indoor unit anti-fall bracket.

The ceiling-mounted air conditioning indoor unit may have the suspension bolts come loose due to significant vibrations from events such as earthquakes, depending on the shape of the mounting brackets. The "Shock Absorption Kachitto KCT Type" is a seismic countermeasure bracket designed to prevent the falling of ceiling-mounted air conditioning indoor units. It can be easily installed by simply inserting it, and retrofitting is also possible. 【Features】 ■ Designed to prevent the falling of ceiling-mounted air conditioning indoor units ■ Easy to install by simply inserting it ■ Retrofitting is possible ■ 3D vibration tests (effect confirmed with seismic wave input) *For more details, please refer to the PDF materials or feel free to contact us.

  • Vibration Monitoring
  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spring Vibration Isolation Slim Hanger 'HSS' for Ceiling-Mounted Air Conditioning Equipment

Spring Vibration Isolation Slim Hanger 'HSS' for Ceiling-Mounted Air Conditioning Equipment

Improvement of vibration damping degradation! Effectively reduces unpleasant low-frequency vibrations that cannot be solved by rubber damping.

"HSS" is a vibration-damping material designed for suspended air conditioning equipment with a spring specification. The performance verification feature allows for easy confirmation of the appropriate deflection. It significantly reduces contact issues with the equipment suspension bolts. Additionally, the integration of the brackets and springs streamlines the installation process, allowing for a neat fit above the air conditioning mounting brackets without requiring extra space. 【Features】 ■ Compliant with RoHS Directive ■ Performance verification feature ■ Improvement in vibration damping degradation ■ Easy installation ■ Slim design *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration Monitoring
  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Vibration Control Measures for Desk Vibration Caused by Ceiling-Mounted Air Conditioning Indoor Units

[Case Study] Vibration Control Measures for Desk Vibration Caused by Ceiling-Mounted Air Conditioning Indoor Units

Significant vibration reduction effect due to the change to spring vibration isolation! The issue has been resolved without taking measures against the desk.

We would like to introduce a case study on measures taken to address perceptible vibrations caused by the operation of a ceiling-mounted air conditioning indoor unit. In a clinic on the 12th floor of an existing building, perceptible vibrations were occurring on the desk in the examination room due to the operation of the ceiling-mounted air conditioning indoor unit below. In response to these vibrations, a measure was implemented to replace the existing vibration isolation rubber of the air conditioning unit with a higher-performance spring vibration isolation system, resulting in a reduction of desk vibrations. 【Case Overview】 ■ Key Point of the Measure: Significant vibration reduction effect achieved by switching to spring vibration isolation ■ Cause: The existing rubber hangers provided almost no vibration isolation, and the desk in the examination room had a design that made it prone to shaking ■ Measure: Replacement with spring vibration isolation ■ Effect: Vibrations were reduced to the extent that no further measures were needed on the desk side, and the building owner was very satisfied with this result. *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration Monitoring
  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Measures against solid noise (noise) from air conditioner outdoor units

[Case Study] Measures against solid noise (noise) from air conditioner outdoor units

Proposal to replace with a spring vibration isolation device! Introducing examples of measures against solid noise from air conditioner outdoor units.

We will introduce a case study on measures to address solid noise (noise) from air conditioning outdoor units. An air conditioning outdoor unit installed on the rooftop of an office building was generating solid noise on the floor directly below when it entered defrost mode. Although the outdoor unit was equipped with rubber pads for vibration isolation, the vibration isolation performance of the rubber pads was minimal, allowing the vibrations from the outdoor unit to propagate to the building structure and cause solid noise on the floor below. As a countermeasure, we proposed replacing it with a spring vibration isolation device. [Case Overview] - Key Point of the Countermeasure: Issues arise during special operation - Cause: Solid noise occurs because the compressor speed built into the outdoor unit increases during defrost mode - Countermeasure: Replacement with a spring vibration isolation device *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration Monitoring
  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tablet Press Testing Machine 'AUTOTAB 200 SERIES'

Tablet Press Testing Machine 'AUTOTAB 200 SERIES'

Easy touch panel operation! A fully automatic tablet press testing machine suitable for genuine tablet compression experiments! Compatible with rotary tablet press mortar and pestle!

- The "AUTOTAB 200 SERIES" allows for professional tablet compression testing with easy operation. - It is a compression testing machine specifically designed for tablet production. - There are models that support two-layer, three-layer, and core tablets. - The entire process from powder filling to discharge is fully automated, and continuous tablet compression from 1 to 100 tablets is possible. - High precision tablet compression through pressure control ensures excellent reproducibility. - It is very convenient for tasks such as creating small test tablets by gradually changing the compression pressure conditions. 【Features】 ■ Easy touch panel operation ■ Compatible with rotary tablet press die ■ Fully automatic continuous tablet compression is possible ■ Easy to move and set up, equipped with casters ■ Output of tablet compression data is also possible *For more details, please feel free to contact us.

  • Powder Molding Machine
  • Food Processing Equipment
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shock Test Device AVEX

Shock Test Device AVEX

Adopts a pneumatic system using compressed air. A shock testing device with excellent reproducibility.

AVEX is a shock testing device that employs a pneumatic method utilizing compressed air to generate shock waveforms (half-wave sine wave, sawtooth wave, SRS wave) with a wide range of (shock acceleration - shock time) characteristics in a short stroke. This device generates shock waveforms and applies them to samples mounted on a sample stage (which performs rising and falling motions). The operation involves the sample stage slowly rising and pausing at a set height, and after a few seconds, using high pressure (compressed air) within a cylinder (incorporated inside the main body) to forcefully drop the sample stage, generating a shock wave by striking it against impact pads (fixed to the main body). The impact pads (pulse generators and elastomers) can be replaced and selected according to the type of waveform desired (mainly half-wave sine wave, trapezoidal wave, and sawtooth wave). The characteristics of the desired waveform (shock acceleration - shock time) are determined by two conditions: the height of the sample stage's rise and the pressure value within the cylinder (the settings for height and pressure will vary depending on the weight of the sample, even for the same waveform). For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drop Test Machine (Drop Tester) PDT Series

Drop Test Machine (Drop Tester) PDT Series

This is a drop testing machine that can conduct drop tests on products and packaged goods with the highest accuracy.

The Lance Mont Company's Drop Tester PDT series is the most accurate drop testing machine for testing the drop of products and packaged goods. In drop tests of packaged goods, it has been found that even a slight tilt of the dropped cargo can cause significant variations in the acceleration experienced by the contents. However, the Drop Tester PDT series employs a unique mechanism where the drop leaf (sample platform), indicated by a precise roller cam and guide, is first pulled straight down by compressed air with an acceleration greater than gravitational acceleration (1G), and then swings back. This allows for precise and reproducible drop tests without adding rotational moments or other factors to the initial setup of the sample. Additionally, by using corner and ridge holding fixtures, it is possible to accurately and reproducibly conduct drops from corners and ridges. A footswitch for efficient testing can be used in conjunction with a handheld controller, and a slot base option is available that allows for a minimum drop height of 2.5 cm. For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Equipment and Devices
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-Speed Impact Testing Machine HS15-HS30

High-Speed Impact Testing Machine HS15-HS30

It is a design that can achieve higher speed changes, acceleration, and action time.

The Lansmont Model HS15-HS30 High-Speed Series shock testing equipment was developed to generate "higher rates of change" required for shock testing of mobile devices and components. It is designed to achieve higher rates of change, acceleration, and duration that could not be achieved with standard or performance series (Model P) shock testers. The table dimensions can be selected to optimal sizes according to customer needs, just like the Model P series. For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-Speed Impact Testing Machine HSX15-HSX30

High-Speed Impact Testing Machine HSX15-HSX30

It is possible to generate very short work times of up to 0.2 msec.

The Lansmont Corporation's Model HSX15-HSX30 High-Speed Series shock testing equipment was developed to generate "higher rates of change" required for shock testing of mobile devices and components. It is designed to achieve higher rates of change, acceleration, and duration of action that could not be generated by the Performance Series (Model P) shock testers. For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Extreme Speed Change Impact Testing Machine HSX30M-HSX60M

Extreme Speed Change Impact Testing Machine HSX30M-HSX60M

Designed to generate pulses of the highest quality in acceleration, action time, and speed variation.

The Lansmont Model HSX30M-HSX60M Extreme Speed Series features medium-sized test specimen table dimensions, designed to generate high-quality pulses of acceleration, duration, and speed changes. Similar to the P Series and HS Series shock testing machines, the table size can be selected to meet the customer's needs. For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vibration Research Society Multi-Dimensional Vibration Testing Device

Vibration Research Society Multi-Dimensional Vibration Testing Device

The dynamic electric multi-dimensional vibration testing device has obtained patents in Japan, the United States, and the United Kingdom. It is a pioneer in multi-dimensional vibration systems.

With the flip of a switch, you can switch between vertical and horizontal. Simultaneous testing in two or three directions is possible. We have adopted static pressure hydraulic bearings. 【Benefits】 ■ Reduction in testing time ■ Cost reduction for vibration fixtures ■ Improved safety (especially for testing large heavy objects) ■ Realistic vibration closer to actual conditions... For more details, please download the catalog or contact us.

  • Strength Testing Equipment
  • Testing Equipment and Devices
  • Vibration Testing
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shock Test Device Model 15D

Shock Test Device Model 15D

This is the smallest shock testing device for tables manufactured by Lansmont Corporation.

The Modes 15D impact testing device is the smallest tabletop impact testing device manufactured by Lansmont Corporation. It features a revolutionary impact table that allows for simultaneous testing on both the top and front surfaces of a small cubic table, equipped with threaded inserts for mounting test samples. This device is ideal for analyzing the impact vulnerability of HDDs, SSDs, smartphones, PDAs, electronic devices, optical drives, fiber optic devices, and small circuit boards. It employs a convenient electronic control electric hoist system for table positioning and mitigates the shock energy generated during testing with a floating seismic base reaction mass, preventing the transmission of vibrations to the surroundings of the impact testing machine. Model 15D comes standard with Lansmont's latest control system, the Touch Test Shock Control (TTS-II). For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shock Testing Machine Model P15-P30

Shock Testing Machine Model P15-P30

The impact performance and mechanical rigidity have been enhanced compared to the standard impact testing machine.

The Model P15-P30 Performance Series shock testing machine is a shock testing device developed by Lansmont Corporation to precisely accommodate special orders from users, including optimal table dimensions, waveforms, machine height, and options tailored to user needs. Furthermore, it enhances shock performance and mechanical rigidity compared to standard shock testing machines. For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shock Testing Machine Model P30M-P60M

Shock Testing Machine Model P30M-P60M

Designed for the widest range of applications at Lansmont Corporation.

The P30M-P60M shock testing machine system is designed by Lansmont for the widest range of applications. This shock testing system lineup is specifically designed for testing samples such as large flat items like digital displays and printed circuit boards. Unlike other shock systems, the P30M-P60M can accurately rotate the shock table from horizontal to vertical at a 90-degree angle. This allows users to conduct tests in different directions without the need to change fixtures. Simply rotate the table 90 degrees and continue with the shock testing. The P30M-P60M system can be custom-designed to meet the user's shock testing needs. Lansmont will design and manufacture the P30M-P60M testing system to meet your specific requirements. For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shock Testing Machine Model P65/81L, P95/115L, P122L

Shock Testing Machine Model P65/81L, P95/115L, P122L

Designed to provide improvements in acceleration, duration of action, and changes in speed.

The Model P65/81L, P95/115L, and P122L impact testing machine series have the same table dimensions as Lansmont's standard large impact testing machine series, but they are designed to provide improved performance in acceleration, duration of action, and rate of change, with a maximum load capacity of up to 1,134 kg (2,500 lbs). They feature a floating seismic base that allows for the generation of high-quality pulses, cushioning of the table's impact energy, and easy and precise adjustment of the horizontal level. For more details, please contact us or refer to the catalog.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drop Test Machine (Drop Tester) 'DT2000S'

Drop Test Machine (Drop Tester) 'DT2000S'

Drop tests for small devices like smartphones can be conducted at any height and speed! High-speed cameras can also be equipped.

The 『DT2000S』 (manufactured by HEINA) is an ideal device for drop testing small products and components. It can be freely adjusted from a height of 60 cm to 2 m and at speeds of 3.5 to 6.25 m/s, allowing for detailed examination of the durability performance of the target objects. Equipped with safety doors, a ceiling, and an electromagnetic door lock, it also prevents the scattering of components during a drop. An optional high-speed camera can be installed for precise inspections. 【Features】 ■ The structure is made of a highly stable aluminum frame ■ Complies with IEC 60068-2-31 drop test standards ■ CE marking compliant ■ Drop counter can be set ■ Fast and smooth operation *For more details, please refer to the catalog or feel free to contact us.

  • Impact Test
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Innovative compact vibration testing device

Innovative compact vibration testing device

A compact, space-saving vibration simulation system that is also ideal for modal excitation.

The small vibration testing equipment manufactured by Labworks, handled by Air Brown, starts from the product design development stage and includes a direct coupling type model for test samples that supports high frequencies (up to 20kHz). We offer a comprehensive proposal including various sensors, modal excitation rods, and vibration exciter suspension fixtures. Our lineup also includes vibration controllers (signal generators), feedback sensors, and other accessories. 【Features】 ■ A rich lineup of products ■ Compact and space-saving, suitable for tabletop use ■ Ideal for modal excitation For more details, please contact us or download the catalog.

  • Vibration Testing
  • Other measurement, recording and measuring instruments
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-Speed Impact Testing Machine (Bump Tester) 'STM Series'

High-Speed Impact Testing Machine (Bump Tester) 'STM Series'

Capable of high-speed repetition of 60 times per minute or more. There is also a type that supports a maximum acceleration of 2000G (positive sine half-wave).

The "STM Series" is a high-speed impact testing machine (bump tester) that efficiently conducts impact tests based on various standards such as EN and MIL. With a repetition speed of over 60 times per minute, it can generate accurate and highly reproducible impacts, contributing to a reduction in testing time. It is also capable of automatic control in conjunction with a robotic arm. It is used in a wide range of fields, including high-end Swiss watch manufacturers, high-precision optical components, batteries, and aerospace. 【Features】 ■ Can be installed in a compact space with minimal maintenance required ■ Easy-to-use measurement and control software is included as standard ■ Operates on compressed air, eliminating the need for oil or nitrogen gas ■ Optional safety guard with CE mark certification can be installed ■ A lineup of seven products, including the "STM5," which allows for simultaneous three-axis testing *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

  • Vibration Testing
  • Testing Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Testing Machine

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.